Phone System
Phone Systems Tutorial part II by The Jolly Roger
Part II will deal with the various types of operators, office heirarchy, & switching equipment.
Operators
There are many types of operators in the network and the more
common ones will be discussed.
TSPS Operator:
The TSPS [(Traffic Service Position System) ass opposed to This
Shitty Phone Service] Operator is probably the bitch (or bastard,
for the female libertationists out there) that most of us are used
to having to deal with. Here are his/her responsibilities:
1) Obtaning billing information for calling card or third number
calls
2) Identifying called customer on person-to-person calls.
3) Obtaining acceptance of charges on collect calls.
4) Identifying calling numbers. This only happens when the calling
# is not automatically recorded by CAMA (Centralized Automatic
Message Accounting) & forwarded from the local office. This could
be caused by equipment failures (ANIF- Automatic Number
Identification Failure) or if the office is not equipped for CAMA
(ONI- Operator Number Identification).
<I once has an equipment failure happen to me & the TSPS operator
came on and said, "What # are you calling FROM?" Out of curiosity,
I gave her the number to my CO, she thanked me & then I was
connected to a conversation that appeared to be between a frameman
& his wife. Then it started ringing the party I wanted to
originally call & everyone phreaked out (excuse the pun). I
immediately dropped this dual line conference!
You should not mess with the TSPS operator since she KNOWS which
number that you are calling from. Your number will show up on a
10-digit LED read-out (ANI board). She also knows whether or not
you are at a fortress phone & she can trace calls quite readily!
Out of all of the operators, she is one of the MOST DANGEROUS.
INWARD operator:
This operator assists your local TSPS ("0") operatorin connecting
calls. She will never question a call as long as the call is
withing HER SERVICE AREA. She can only be reached via other
operators or by a blue box. From a blue box, you would dial
KP+NPA+121+ST for the INWARD operator that will help you connect
any calls within that NPA only. (Blue Boxing will be discussed in
a future file).
DIRECTORY ASSISTANCE Operator:
This is the operator that you are connected to when you dial: 411
or NPA-555-1212. She does not readily know where you are calling
from. She does not have access to unlisted numbers, but she DOES
know if an unlisted # exists for a certain listing.
There is also a directory assistance operator for deaf people who
use teletypewriters. If your modem can transfer BAUDOT [(45.5
baud). One modem that I know of that will do this is the Apple Cat
acoustic or the Atari 830 acoustic modem. Yea I know they are hard
to find... but if you wanna do this.. look around!) then you can
call him/her up and have an interesting conversation. The # is:
800-855-1155. They use the standard Telex abbreviations such as GA
for go ahead. they tend to be nicer and will talk longer than your
regular operators. Also, they are more vulnerable into being
talked out of information through the process of "social
engineering" as Chesire Catalyst would put it.
<Unfortunately, they do not have access to much. I once
bullshitted with one of these operators a while back and I found
out that there are 2 such DA offices that handle TTY. One is in
Philadelphia and the other is in California. They have approx. 7
operators each. most of the TTY operators think that their job is
boring (based on an official "BIOC poll"). They also feel that
they are under-paid. They actually call up a regular DA # to
process your request (sorry, no fancy computers!)
Other operators have access to their own DA by dialing
KP+NPA+131+ST (MF).
CN/A operators:
CN/A Operators are operators that do exactly the opposite of what
directory assistance operators are for. In my experience, these
operators know more than the DA op's do & they are more
susceptable to "social engeneering." It is possible to bullshit a
CN/A operator for the NON-PUB DA # (ie, you give them the name &
they give you the unlisted number. See the article on unlisted
numbers in this cookbook for more info about them.). This is due
to the fact that they assume that you are a fellow company
employee. Unfortunately, the AT&T breakup has resulted in the
break-up of a few NON-PUB DA #'s and policy changes in CN/A
INTERCEPT Operator:
The intercept operator is the one that you are connected to when
there are notenough recordings available to tell you that the #
has been disconnected or changed. She usually says, "What # you
callin'?" with a foreign accent. This is the lowest operator
lifeform. Even though they don't know where you are calling from,
it is a waste or your time to try to verbally abuse them since
they usually understand very little English anyway.
Incidentally, a few area DO have intelligent INTERCEPT Operators.
OTHER Operators:
And then there are the: MObile, Ship-to-Shore, Conference, Marine
Verify, "Leave Word and Call Back," Rout & Rate
(KP+800+141+1212+ST), & other special operators who have one
purpose or another in the network.
Problems with an Operator> Ask to speak to their supervisor... or
better yet the Group Chief (who is the highest ranking official in
any office) who is the equivalent of the Madame ina whorehouse.
By the way, some CO's that willallow you to dial a 0 or 1 as the
4th digit, will also allow you to call special operators & other
fun Tel. Co. #'s without a blue box. This is ver rare, though! For
example,212-121-1111 will get you a NY Inward Operator.
Office Hierarchy
Every switching office in North America (the NPA system), is assigned an office name and class. There are five classes of offices numbered 1 through 5. Your CO is most likely a class 5 or end office. All long-distance (Toll) calls are switched by a toll office which can be a class 4, 3, 2, or 1 office. There is also a class 4X office callen an intermediate point. The 4X office is a digital one that can have an unattended exchange attached to it (known as a Remote Switching Unit (RSU)).
The following chart will list the Office #, name, & how many of those office exist (to the best of my knowledge) in North America:
Class Name Abb # Existing
1 Regional Center RC 12 2 Sectional Center SC 67 3 Primary Center PC 230 4 Toll Center TC 1,300 4P Toll Point TP n/a 4X Intermediate Point IP n/a 5 End Office EO 19,000 6 RSU RSU n/a
When connecting a call from one party to another, the switching equipment usually tries to find the shortest route between the class 5 end office of the caller & the class 5 end officeof the called party. If no inter-office trunks exist between the two parties, it will then move upward to the next highest office for servicing calls (Class 4). If the Class 4 office cannot handle the call by sending it to another Class 4 or 5 office, it will then be sent to the next highest office in the hierarchy (3). The switching equipment first uses the high-usage interoffice trunk groups, if they are busy then it goes to the fina; trunk groups on the next highest level. If the call cannot be connected, you will probably get a re-order [120 IPM (interruptions per minute) busy signal] signal. At this time, the guys at Network Operations are probably shitting in their pants and trying to avoid the dreaded Network Dreadlock (as seen on TV!).
It is also interesting to note that 9 connections in tandem is called ring-around-the-rosy and it has never occured in telephone history. This would cause an endless loop connection [a neat way to really screw up the network].
The 10 regional centers in the US & the 2 in Canada are all interconnected. they form the foundation of the entire telephone network. Since there are only 12 of them, they are listed below:
Class 1 Regional Office Location NPA
Dallas 4 ESS 214 Wayne, PA 215 Denver 4T 303 Regina No. 2SP1-4W (Canada) 306 St. Louis 4T 314 Rockdale, GA 404 Pittsburgh 4E 412 Montreal No. 1 4AETS (Canada) 504
That's it for now! More info to come Future update to the Cookbook! Have fun! -Exodus-