Skip to content
Tenshi Hinanawi edited this page Apr 28, 2012 · 2 revisions

courtesy of Exodus

......................................................................
......................................................................
.                        The Bell Glossary -                        ..
.                               by                                  ..
.                         /\<\     /\<\                             ..
.                        </\>\>ad </\>\>arvin                       ..
......................................................................
......................................................................

ACD

Automatic Call Distributor - A system that automatically distributes calls to operator pools (providing services such as intercept and directory assistance), to airline ticket agents, etc.

Administration

The tasks of record-keeping, monitoring, rearranging, prediction need for growth, etc.

AIS

Automatic Intercept System - A system employing an audio-response unit under control of a processor to automatically provide pertinent info to callers routed to intercept.

Alert

To indicate the existence of an incoming call, (ringing).

ANI

Automatic Number Identification - Often pronounced "Annie," a facility for automatically identify the number of the calling party for charging purposes.

Appearance

A connection upon a network terminal, as in "the line has two network appearances."

Attend

The operation of monitoring a line or an incoming trunk for off-hook or seizure, respectively.

Audible

The subdued "image" of ringing transmitted to the calling party during ringing; not derived from the actual ringing signal in later systems.

Backbone Route

The route made up of final-group trunks between end offices in different regional center areas.

BHC

Busy Hour Calls - The number of calls placed in the busy hour.

Blocking

The ratio of unsuccessful to total attempts to use a facility; expresses as a probability when computed a priority.

Blocking Network

A network that, under certain conditions, may be unable to form a transmission path from one end of the network to the other. In general, all networks used within the Bell Systems are of the blocking type.

Blue Box

Equipment used fraudulently to synthesize signals, gaining access to the toll network for the placement of calls without charge.

BORSCHT Circuit

A name for the line circuit in the central office. It functions as a mnemonic for the functions that must be performed by the

circuit

Battery, Overvoltage, Ringing, Supervision, Coding, Hybrid, and Testing.

Busy Signal

(Called-line-busy) An audible signal which, in the Bell System, comprises 480hz and 620hz interrupted at 60IPM.

Bylink

A special high-speed means used in crossbar equipment for routing calls incoming from a step-by-step office. Trunks from such offices are often referred to as "bylink" trunks even when incoming to noncrossbar offices; they are more properly referred to as "dc incoming trunks." Such high-speed means are necessary to assure that the first incoming pulse is not lost.

Cable Vault

The point which phone cable enters the Central Office building.

CAMA

Centralized Automatic Message Accounting - Pronounced like Alabama.

CCIS

Common Channel Interoffice Signaling - Signaling information for trunk connections over a separate, nonspeech data link rather that over the trunks themselves.

CCITT

International Telegraph and Telephone Consultative Committee- An International committee that formulates plans and sets standards for intercountry communication means.

CDO

Community Dial Office - A small usually rural office typically served by step-by-step equipment.

CO

Central Office - Comprises a switching network and its control and support equipment. Occasionally improperly used to mean "office code."

Centrex

A service comparable in features to PBX service but implemented with some (Centrex CU) or all (Centrex CO) of the control in the central office. In the later case, each station's loop connects to the central office.

Customer Loop

The wire pair connecting a customer's station to the central office.

DDD

Direct Distance Dialing - Dialing without operator assistance over the nationwide intertoll network.

Direct Trunk Group

A trunk group that is a direct connection between a given originating and a given terminating office.

EOTT

End Office Toll Trunking - Trunking between end offices in different toll center areas.

ESB

Emergency Service Bureau - A centralized agency to which 911 "universal" emergency calls are routed.

ESS

Electronic Switching System - A generic term used to identify as a class, stored-program switching systems such as the Bell System's No.1 No.2, No.3, No.4, or No.5.

ETS

Electronic Translation Systems - An electronic replacement for the card translator in 4A Crossbar systems. Makes use of the SPC 1A Processor.

False Start

An aborted dialing attempt.

Fast Busy

(often called reorder) - An audible busy signal interrupted at twice the rate of the normal busy signal; sent to the originating station to indicate that the call blocked due to busy equipment.

Final Trunk Group

The trunk group to which calls are routed when available high-usage trunks overflow; these groups generally "home" on an office next highest in the hierarchy.

Full Group

A trunk group that does not permit rerouting off-contingent foreign traffic; there are seven such offices.

Glare

The situation that occurs when a two-way trunk is seized more or less simultaneously at both ends.

High Usage Trunk Group

The appellation for a trunk group that has alternate routes via other similar groups, and ultimately via a final trunk group to a higher ranking office.

Intercept

The agency (usually an operator) to which calls are routed when made to a line recently removed from a service, or in some other category requiring explanation. Automated versions (ASI) with automatic voiceresponse units are growing in use.

Interrupt

The interruption on a phone line to disconnect and connect with another station, such as an Emergence Interrupt.

Junctor

A wire or circuit connection between networks in the same office. The functional equivalent to an intraoffice trunk.

MF

Multifrequency - The method of signaling over a trunk making use of the simultaneous application of two out of six possible frequencies.

NPA

Numbering Plan Area.

ONI

Operator Number Identification - The use of an operator in a CAMA office to verbally obtain the calling number of a call originating in an office not equipped with ANI.

PBX: Private Branch Exchange - (PABX

Private Automatic Branch Exchange) An telephone office serving a private customer, Typically , access to the outside telephone network is provided.

Permanent Signal

A sustained off-hook condition without activity (no dialing or ringing or completed connection); such a condition tends to tie up equipment, especially in earlier systems. Usually accidental, but sometimes used intentionally by customers in high-crime-rate areas to thwart off burglars.

POTS

Plain Old Telephone Service - Basic service with no extra "frills".

ROTL

Remote Office Test Line - A means for remotely testing trunks.

RTA

Remote Trunk Arrangement - An extension to the TSPS system permitting its services to be provided up to 200 miles from the TSPS site.

SF: Single Frequency. A signaling method for trunks

2600hz is impressed upon idle trunks.

Supervise

To monitor the status of a call.

SxS

(Step-by-Step or Strowger switch) - An electromechanical office type utilizing a gross-motion stepping switch as a combination network and distributed control.

Talkoff

The phenomenon of accidental synthesis of a machine-intelligible signal by human voice causing an unintended response. "whistling a tone".

Trunk

A path between central offices; in general 2-wire for interlocal, 4-wire for intertoll.

TSPS

Traffic Service Position System - A system that provides, under stored- program control, efficient operator assistance for toll calls. It does not switch the customer, but provides a bridge connection to the operator.

X-bar

(Crossbar) - An electromechanical office type utilizing a "fine-motion" coordinate switch and a multiplicity of central controls (called markers).

There are four varieties -

  • No.1 Crossbar - Used in large urban office application; (1938)
  • No 3 Crossbar - A small system started in (1974).
  • No.4A/4M Crossbar - A 4-wire toll machine; (1943).
  • No.5 Crossbar - A machine originally intended for relatively small suburban applications; (1948)
  • Crossbar Tandem - A machine used for interlocal office switching.

Revised in '94 CBIV,.......... -= Exodus =-

Clone this wiki locally