Igniter from Book Matches
Tenshi Hinanawi edited this page Apr 19, 2012
·
1 revision
by the Jolly Roger
This is a hot igniter made from paper book matches for use with molotov cocktail and other incendiaries.
Paper book matches Adhesive or friction tape
- Remove the staple(s) from match book and seperate matches from cover.
- Fold and tape one row of matches (fold in thirds)
- Shape the cover into a tube with striking surface on the inside and tape. Make sure the folder cover will fit tightly around the taped match heads. Leave cover open at opposite end for insertion of the matches.
- Push the taped matches into the tube until the bottom ends are exposed about 3/4 in. (2 cm)
- Flatten and fold the open end of the tube so that it laps over about 1 in. (2-1/2 cm); tape in place.
- Tape the "match end tab" of the igniter to the neck of the molotov cocktail.
- Grasp the "cover and tab" and pull sharply or quickly to ignite.
The book match igniter can be used by itself to ignite flammable liquids, fuse cords, and similar items requiring hot ignition.
CAUTION: Store matches and completed igniters in moistureproof containers such as rubber or plastic bags until ready for use. Damp or wet paper book matches will not ignite.
Courtesy of -= Exodus =-