CY8CPROTO-063-BLE 4.2.0

• Updated linker scripts and startup code to align with mtb-pdl-cat1 v3.4.0
• Added functionality to enable BSP Assistant chip flow
• Added capabilities to match BSPS created by BSP Assistant chip flow

CY8CPROTO-063-BLE

• Add macro CYBSP_USER_BTN_DRIVE indicating the drive mode that should be used for user buttons
• PSoC 64 boards: Fix cybsp_init not recognizing that a prebuilt CM0+ image is in use when using TFM.

CY8CPROTO-063-BLE 4.0.0

Note: This revision is only compatible with ModusToolbox Tools 3.0 and newer.

• Removed default dependency on CAPSENSE™ middleware. The library manager can be used to add this dependency if desired.
• Updated recipe-make, core-make, and PDL to new major versions
• Regenerated code with Configurators from ModusToolbox™ v3.0.0
• Renamed top level board makefile to bsp.mk
• Removed version.xml file in favor of new props.json

CY8CPROTO-063-BLE v3.1.0

Added optional macro CYBSP_CUSTOM_SYSCLK_PM_CALLBACK to allow overriding default clock power management behavior.

CY8CPROTO-063-BLE 3.0.0

• Updated to HAL dependency to v2.0.0
• Updated CAPSENSE™ dependency to v3.0.0
• Regenerated code with Configurators from ModusToolbox™ v2.4.0

CY8CPROTO-063-BLE 2.3.0

• Add new connectivity components for easier board customization
• Simplify BT configuration settings for boards that support it
• Minor branding updates

CY8CPROTO-063-BLE 2.1.0

• Added component CAT1 to all boards
• Added new components for connectivity chips
• Added BT configuration settings for boards that support it
• Minor documentation updates

CY8CPROTO-063-BLE 2.0.0

• Updated design files and GeneratedSource with ModusToolbox 2.2 release
• Migrated pin definitions into design.modus file
• Updated clock frequencies to 100 MHz (fast) / 50 MHz (slow)
• Updated MPNs on some boards to non-obsolete parts
• Switched psoc6pdl dependency to new mtb-pdl
• Switched psoc6hal dependency to new mtb-hal
• Switched psoc6make dependency to new core-make & recipe-make-cat1a
  NOTE: This version requires ModusToolbox tools 2.2 or later. This version is not backwards compatible with 1.X versions. Additional manual steps must be taken to successfully update a design using a 1.x version of the BSP to this version.

CY8CPROTO-063-BLE 1.3.0

• Minor update for documentation & branding
• Updated design files to use latest personality files
• Initialize VDDA voltage if set in configurator
  NOTE: This requires psoc6hal 1.3.0 or later

CY8CPROTO-063-BLE 1.2.1

• Added 43012/4343W/43438 component to appropriate BSPs
• Added new capabilities for improved code example filtering