Arduino library to enable smooth servo movement.

Export your Blender animation to servo position values. They can be used with an Arduino compatible micro controller to move PWM-driven servos according to your animation.

Example programs MSP430F5529

I2Cwrapper is a firmware framework which helps you implement Arduino based I2C target (slave) devices for control of non-I2C hardware. Supports plain Arduinos, ESP8266, ESP32, SAMD, STM32, and ATtiny platforms.

Simple ESP32-Arduino library to operate LX-16A serial servos

Richard G. Hirst's 'servoblaster' userspace PVM Servo controller for Raspberry Pi

SlowMotionServo is an Arduino library to drive servos slowly along a trajectory pos(t)

This library enables you to use 1 Hardware Timer on RP2040-based board, such as Nano_RP2040_Connect, RASPBERRY_PI_PICO, to control up to 16 or more servo motors. Now permitting using servos with different pulse ranges simultaneously.

This library helps to control servos based on an exported Blender animation. It is specifically designed to work with the Blender Servo Animation Add-on.

SCS/SMS servo library for Arduino [Not mine]

🐦 Arduino sketch to control the servos of an RC ornithopter.

Feetech Servo Python SDK. Copy official repository.

Sophisticated Servo Power Management for the Discriminating User

Autonomous driving model car based on python/tensorflow deep learning running on a jetson nano hardware.

This library enables you to use 1 Hardware Timer on ESP32, ESP32_S2, ESP32_S3 or ESP32_C3-based board to control up to 16 or more servo motors. Tested OK with ESP32 core v2.0.4 now

Servo library for up to 25 (32 is theoretical maximum) servos on Raspberry Pico.

Android app that monitors ANT+ bike speed sensor and controls a RC servo powered fan automatically

STM32F303CC Servo Motor Control

This library enables you to use 1 Hardware PWM module on nRF52832/nRF52840-based board, such as AdaFruit Feather nRF52832, nRF52840 Express, Itsy-Bitsy nRF52840 Express, etc. to control up to 16 or more servo motors.

This is a prototype 8-legged spider with 2 pincers, 2 cameras for eyes, moving vision, and a mandible with pointy teeth to scare the little children, all made mode LEGO Technic. The MCU is an ESP32 Dev module, and software is written in C++.