Arduino TM16xx library for LED & KEY and LED Matrix modules based on TM1638, TM1637, TM1640 and similar chips. Simply use print() on 7-segment and use Adafruit GFX on matrix.

An Arduino library to drive TM1638 seven segment modules.

MicroPython driver for TM1638 dual quad 7-segment LED modules with switches

I2Cwrapper is a firmware framework which helps you implement Arduino based I2C target (slave) devices for control of non-I2C hardware. Supports plain Arduinos, ESP8266, ESP32, SAMD, STM32, and ATtiny platforms.

An index of projects and libraries for Raspberry Pi Pico's (RP2040) stored in this github account.

A C++ Library to connect electronic displays to Raspberry Pi single board computers.

A basic verilog driver for the TM1638 LED and key matrix chip

TM1638 driver for AVR (ATmega32), STM32 (HAL) and ESP32 (esp-idf)

TM1638 LED driver with key-scan library for Arduino

Arduino Real Time Alarm Clock DS3231 with TM1638. Arduino Clock with Battery backup (real time clock), Time, Date, Alarm, Temperature, TM1638 seven segment module output and input, Display Sleep mode.

Fastest library to control TM1638 chip (for example: "LED AND KEY") based modules

A collection of projects and libraries for STM32 based micro-controllers family.

A SDK C++ library for a Raspberry PI PICO RP2040 device to support TM1638 LED modules

MQTT Wrapper for the TM1638Plus library

Projects and libraries code for the Pic 16F18446 Microcontroller ( 8-bit, 20-pin).

AVR ASM Library to drive TM1638 from Titan Micro Electronics. It's a special circuit for LED control.

Remote for JaroliftMQTT based on TM1638.

A C++ installable Dynamic Raspberry pi library to display data on a 8-digit TM1638 seven segment module This library supports several variants. The (8 KEY & 8 LED) variant which has 8 LED's and 8 Push buttons. The (16 KEY QFY) variant which has 16 pushbuttons. The (LKM1638) variant which has 8 bi-colour LED's and 8 Push buttons.

TM1638 full function driver library for general MCU and Linux.

A simple animation to test the TM1638 LED Controller with a common anode custom display with 8 digits and 8 little bars