Embedded Rust on Espressif training material.

This is an ESP32 / ESP8266 WiFi Connection Manager with fallback web configuration portal. Use this library for configuring ESP32 (including ESP32-S2 and ESP32-C3), ESP8266 modules' WiFi, etc. Credentials at runtime. You can also specify static DNS servers, personalized HostName, fixed or random AP WiFi channel. With examples supporting ArduinoJson

This is an ESP32 (including ESP32-S2 and ESP32-C3) / ESP8266 WiFi Connection Manager, using ESPAsyncWebServer, with fallback web configuration portal. Use this library for configuring ESP32, ESP8266 modules' WiFi, etc. Credentials at runtime. You can also specify static DNS servers, personalized HostName, fixed or random AP WiFi channel. With ex…

Unified library for M5Stack series

Beryllium OS, a unix-like operating system for CircuitPython powered microcontrollers. (Formerly known as ljinux)

This library enables you to use Interrupt from Hardware Timers on an ESP32-based board. It now supports 16 ISR-based timers, while consuming only 1 hardware Timer. Timers' interval is very long (ulong millisecs). The most important feature is they're ISR-based timers. Therefore, their executions are not blocked by bad-behaving functions or tasks…

ESP32 PWM, Servo, Easing and Tone. Smart GPIO pin management and advanced control features.

Embedded Rust on Espressif 简体中文版

Library using AsyncWebServer to configure MultiWiFi/Credentials at runtime for ESP32 (including ESP32-S2 and ESP32-C3) and ESP8266 boards. You can also specify DHCP HostName, static AP and STA IP. Use much less memory compared to full-fledge WiFiManager. Config Portal will be auto-adjusted to match the number of dynamic custom parameters. Option…

Light-Weight MultiWiFi/Credentials Manager for ESP32 (including ESP32-S2 and ESP32-C3) and ESP8266 boards boards. Powerful-yet-simple-to-use feature to enable adding dynamic custom parameters. paragraph=Library to configure MultiWiFi/Credentials at runtime for ESP32/ESP8266 boards. You can also specify DHCP HostName, static AP and STA IP. Use mu…

ESP_DoubleResetDetector is a library for the ESP32/ESP8266 Arduino platform to enable trigger configure mode by resetting twice.

Polyglot examples for the 01Space ESP32-C3FH4-RGB board

A display library: implemented purely in Micropython. 纯 Micropython 实现的显示库

Ghost ESP is a ESP32 Firmware that Revolutionizes the way we use ESP32 devices in a Pen Testing aspect

ESP32 application to act as an IO Extender for another ESP.

This library enables you to use 1 Hardware Timer on ESP32-based board to control 16 or more servo motors. Now supporting ESP32, ESP32_S2, ESP32_S3, ESP32_C3-based boards. Tested OK with ESP32 core v2.0.5

XMAS Tree from stacked ws2812 rings driven by a Digispark

This library enables you to use Interrupt from Hardware Timers on an ESP32, ESP32_S2 or ESP32_C3-based board to create and output PWM to pins. It now supports 16 ISR-based synchronized PWM channels, while consuming only 1 Hardware Timer. PWM interval can be very long (uint32_t millisecs). The most important feature is they're ISR-based PWM chann…

Firmware for ESP32-C3 allowing eBUS communication for ebusd (https://github.com/john30/ebusd)

Replace Tuya device wifi module with ESP32-C3