Cooperative multitasking for Arduino, ESPx, STM32, nRF and other microcontrollers

Arduino library for creating MIDI controllers and other MIDI devices.

GUIslice drag & drop embedded GUI in C for touchscreen TFT on Arduino, Raspberry Pi, ARM, ESP8266 / ESP32 / M5stack using Adafruit-GFX / TFT_eSPI / UTFT / SDL

A do-it-yourself thermal imager, compatible with the FLIR Lepton 2.5, 3.1R and 3.5 sensor with Arduino firmware

Ferret is a free software lisp implementation for real time embedded control systems.

Payload for teensy like a rubber ducky but the syntax is different. this Human interfaes device ( HID attacks ). Penetration With Teensy . Brutal is a toolkit to quickly create various payload,powershell attack , virus attack and launch listener for a Human Interface Device ( Payload Teensy )

Teensy/Arduino flight controller and stabilization for small-scale VTOL vehicles

Arduino GFX developing for various color displays and various data bus interfaces

This is a library for creating a MIDI controller using an Arduino or Teensy board.

A community delivered, open source embedded operating system project.

OneWire slave device emulator

Implementation of the CNN from End to End Learning for Self-Driving Cars on a Nvidia Jetson TX1 using Tensorflow and ROS

Send and receive MIDI messages over Ethernet (rtpMIDI or AppleMIDI)

KiCAD library for Teensy microcontrollers

Fast Stepper Motor Library for Teensy boards

DiffBot is an autonomous 2wd differential drive robot using ROS Noetic on a Raspberry Pi 4 B. With its SLAMTEC Lidar and the ROS Control hardware interface it's capable of navigating in an environment using the ROS Navigation stack and making use of SLAM algorithms to create maps of unknown environments.

A Teensy 3.x/4.x based polyphonic synthesizer, modelled after the Juno-106

Libraries to program and use UART-based EBYTE wireless data transceivers

Hardware Design: Eurorack shield for teensy 4.1 with 14 in / 16 out analog channels

Teensy 4/3.x/LC ADC implementation