Steele PDB for KISS

---

Installing MWOSD onto your SteelePDB

• Connect OSD via USB and install any drivers necessary
• Ensure port 2 is disconnected from KISS FC and a battery is connected
• Download Xloader STEELEPDB.ZIP pack and extract to a folder
• Run Xloader
• Select device = Uno (ATMEGA328)
• Select firmware = steelepdb.kiss.standard or gps
• Select correct com port
• Click Upload

Configuring MWOSD

• Purchase and download the PC APP. It is small amount to cover costs (£1.99).
• Select correct com port and baud rate
• Default baud is 115200.
• Connect and amend settings as you require.
• MANDATORY - OSD will require fonts to be uploaded from GUI. (FONT: Upload button)

---

Software links

• MWOSD source code for custom installs is available here
• MWOSD GUI configurator is available here
• SteelePDB XLOADER available here

---

Custom installation guide

SPECIAL SteelPDB NOTE: if using custome installation method Arduino IDE should be configured from tools menu as follows:

• Board = Guniono / Uno
• Processor = Atmega328((5v,16 MHz)
• Port = COMX that matches your USB connection to the OSD hardware

Software links

• Custom installation instructions are available here
• Arduino IDE is available here

---

NOTE:

• Not all features are available for all FC or GPS users.