32-bit serial parallel multiplier with design-for-testability (DFT) structures, namely, scan-chain and JTAG controller. The DFT structures are automatically inserted using Fault and the design is taped-out using OpenLANE.
| I/Os | Mode | Function |
|---|---|---|
| clk | input | clock pin |
| rst | input | active high reset |
| mc | input | 32-bit multiplicant |
| mp | input | 32-bit multiplier |
| prod | output | 64-bit product |
| tck* | input | test clock |
| tms* | input | test mode select; used to navigate the TAP state machine |
| tdi* | input | test data-in; used to shift-in test vector through the scan-chain |
| trst* | input | test rese; used to reset the TAP state machine to the idle state |
| tdo* | output | test data-out; used to scan out the response |
| tdo_paden_o | output | test data-out enable; used to control the tdo pad |
*NOTE:
- The five test ports (tck, tms, tdi, trst, tdo) are only used during testing to scan-in a test vector and scan-out the response.
- When not in the testing mode (i.e in the functional mode), tck, tdi, and trst must be pulled to zero and tms must be pulled to one.
