-
Notifications
You must be signed in to change notification settings - Fork 94
Get D365LcsAssetValidationStatus
Get the validation status from LCS
Get-D365LcsAssetValidationStatus [-AssetId] <String> [[-ProjectId] <Int32>] [[-BearerToken] <String>]
[[-LcsApiUri] <String>] [-WaitForValidation] [[-SleepInSeconds] <Int32>] [[-RetryTimeout] <TimeSpan>]
[-EnableException] [<CommonParameters>]
Get the validation status for a given file in the Asset Library in LCS
Get-D365LcsAssetValidationStatus -ProjectId 123456789 -BearerToken "JldjfafLJdfjlfsalfd..." -AssetId "958ae597-f089-4811-abbd-c1190917eaae" -LcsApiUri "https://lcsapi.lcs.dynamics.com"
This will check the validation status for the file in the Asset Library. The LCS project is identified by the ProjectId 123456789, which can be obtained in the LCS portal. The file is identified by the AssetId "958ae597-f089-4811-abbd-c1190917eaae", which is obtained either by earlier upload or simply looking in the LCS portal. The request will authenticate with the BearerToken "Bearer JldjfafLJdfjlfsalfd...". The http request will be going to the LcsApiUri "https://lcsapi.lcs.dynamics.com" (NON-EUROPE).
Get-D365LcsAssetValidationStatus -AssetId "958ae597-f089-4811-abbd-c1190917eaae"
This will check the validation status for the file in the Asset Library. The file is identified by the AssetId "958ae597-f089-4811-abbd-c1190917eaae", which is obtained either by earlier upload or simply looking in the LCS portal.
All default values will come from the configuration available from Get-D365LcsApiConfig.
The default values can be configured using Set-D365LcsApiConfig.
Get-D365LcsAssetValidationStatus -AssetId "958ae597-f089-4811-abbd-c1190917eaae" -WaitForValidation
This will check the validation status for the file in the Asset Library. The file is identified by the AssetId "958ae597-f089-4811-abbd-c1190917eaae", which is obtained either by earlier upload or simply looking in the LCS portal. The cmdlet will every 60 seconds contact the LCS API endpoint and check if the status of the validation is either success or failure.
All default values will come from the configuration available from Get-D365LcsApiConfig.
The default values can be configured using Set-D365LcsApiConfig.
Invoke-D365LcsUpload -FilePath "C:\temp\d365fo.tools\Release-2019-05-05.zip" | Get-D365LcsAssetValidationStatus -WaitForValidation
This will start the upload of a file to the Asset Library and check the validation status for the file in the Asset Library. The file that will be uploaded is based on the FilePath "C:\temp\d365fo.tools\Release-2019-05-05.zip". The output object received from Invoke-D365LcsUpload is piped directly to Get-D365LcsAssetValidationStatus. The cmdlet will every 60 seconds contact the LCS API endpoint and check if the status of the validation is either success or failure.
All default values will come from the configuration available from Get-D365LcsApiConfig.
The default values can be configured using Set-D365LcsApiConfig.
Get-D365LcsAssetValidationStatus -AssetId "958ae597-f089-4811-abbd-c1190917eaae" -RetryTimeout "00:01:00"
This will check the validation status for the file in the Asset Library, and allow for the cmdlet to retry for no more than 1 minute. The file is identified by the AssetId "958ae597-f089-4811-abbd-c1190917eaae", which is obtained either by earlier upload or simply looking in the LCS portal.
All default values will come from the configuration available from Get-D365LcsApiConfig.
The default values can be configured using Set-D365LcsApiConfig.
The unique id of the asset / file that you are trying to deploy from LCS
Type: String
Parameter Sets: (All)
Aliases:
Required: True
Position: 1
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: FalseThe project id for the Dynamics 365 for Finance & Operations project inside LCS
Default value can be configured using Set-D365LcsApiConfig
Type: Int32
Parameter Sets: (All)
Aliases:
Required: False
Position: 2
Default value: $Script:LcsApiProjectId
Accept pipeline input: False
Accept wildcard characters: FalseThe token you want to use when working against the LCS api
Default value can be configured using Set-D365LcsApiConfig
Type: String
Parameter Sets: (All)
Aliases: Token
Required: False
Position: 3
Default value: $Script:LcsApiBearerToken
Accept pipeline input: False
Accept wildcard characters: FalseURI / URL to the LCS API you want to use
The value depends on where your LCS project is located. There are multiple valid URI's / URL's
Valid options: "https://lcsapi.lcs.dynamics.com" "https://lcsapi.eu.lcs.dynamics.com" "https://lcsapi.fr.lcs.dynamics.com" "https://lcsapi.sa.lcs.dynamics.com" "https://lcsapi.uae.lcs.dynamics.com" "https://lcsapi.ch.lcs.dynamics.com" "https://lcsapi.no.lcs.dynamics.com" "https://lcsapi.lcs.dynamics.cn" "https://lcsapi.gov.lcs.microsoftdynamics.us"
Default value can be configured using Set-D365LcsApiConfig
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: 4
Default value: $Script:LcsApiLcsApiUri
Accept pipeline input: False
Accept wildcard characters: FalseInstruct the cmdlet to wait for the validation process to complete
The cmdlet will sleep for 60 seconds, before requesting the status of the validation process from LCS
Type: SwitchParameter
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: FalseTime in seconds that you want the cmdlet to use as the sleep timer between each request against the LCS endpoint
Default value is 60
Type: Int32
Parameter Sets: (All)
Aliases:
Required: False
Position: 5
Default value: 60
Accept pipeline input: False
Accept wildcard characters: FalseThe retry timeout, before the cmdlet should quit retrying based on the 429 status code
Needs to be provided in the timspan notation: "hh:mm:ss"
hh is the number of hours, numerical notation only mm is the number of minutes ss is the numbers of seconds
Each section of the timeout has to valid, e.g. hh can maximum be 23 mm can maximum be 59 ss can maximum be 59
Not setting this parameter will result in the cmdlet to try for ever to handle the 429 push back from the endpoint
Type: TimeSpan
Parameter Sets: (All)
Aliases:
Required: False
Position: 6
Default value: 00:00:00
Accept pipeline input: False
Accept wildcard characters: FalseThis parameters disables user-friendly warnings and enables the throwing of exceptions This is less user friendly, but allows catching exceptions in calling scripts
Type: SwitchParameter
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: FalseThis cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
Author: Mötz Jensen (@Splaxi)
- Install as a non-Administrator
- Install as a Administrator
- Import d365fo.tools module
- List available commands from d365fo.tools module
- Get help content for a command
- Start, Stop and List services
- Import users into the D365FO environment
- Import external users into the D365FO environment
- Enable users in the D365FO environment
- Update users in the D365FO environment
- Provision D365FO environment to new Azure AD tenant
- Import a bacpac file into a Tier1 environment
- List modules / models
- Compile module
- Install AzCopy
- Install SqlPackage
- Install Nuget
- Speed up LCS download via AzCopy
- Download latest bacpac from LCS via AzCopy
- Register NuGet source
- Configure Azure Logic App
- Fix AzureStorageConfig
- Run a runnable class
- Update users in environment
- Work with Azure Storage Account
- Work with packages, resource label files, language and lables
- Working with the different D365 services