This code example demonstrates connecting to AWS IoT over MQTT using the AnyCloud SDK for PSoC 6 MCU and CYW43xxx connectivity devices.

The code example demonstrates connecting to the Azure IoT services using the Azure SDK for Embedded C. This code example demonstrates the features such as iot hub - C2D, Telemetry, Methods, Twin, Provisioning, Plug and Play.

This code example demonstrates the implementation of the Bluetooth® LE vendor-specific device using AIROC™ CYW20829, PSoC™ 6, Wi-Fi & Bluetooth® combo chips and ModusToolbox™ software environment.

This repository is deprecated. Use the ModusToolbox™ example available here - https://github.com/Infineon/mtb-example-usb-device-audio-freertos. This example demonstrates how to use PSoC 6 MCU to implement a USB Audio Device and HID Consumer Control that connects to the PC via the USB interface. The example also uses FreeRTOS.

Demonstrates simple UART communication by printing a "Hello World" message on a terminal and blinks an LED using a Timer resource.

This example demonstrates building a bootlaoder application for PSoC 6 using MCUboot, an open source secure bootloader for 32-bit MCUs. This bootloader app runs on CM0+.

This example demonstrates the UART (HAL) transmit and receive operation in PSoC 6 MCU.

This code example demonstrates Wi-Fi provisioning via SoftAP and setting up a web server with PSoC 6 MCU and CYW43xxx connectivity devices.

This code example demonstrates Wi-Fi onboarding with BLE

This example demonstrates how to use Infineon MCU devices to implement a USB audio device and HID audio playback control that connects to the PC via the USB interface. The example uses FreeRTOS.

This code example encrypts and decrypts user input data using the AES algorithm using a 128-bit key. The encrypted and decrypted data are displayed on a UART terminal emulator.

This code example demonstrates the implementation of a simple BLE GAP Central - GATT Server with Current Time Service using the Cypress Combo (Wi-Fi+BT) SoCs.

This community code example (CCE) demonstrates the implementation of LTE CAT M1 connectivity to PSoC6 via Point-to-Point Protocol (PPP). This CCE demonstrates the steps to add LTE connectivity to any existing Wi-Fi based code example. mtb-example-anycloud-mqtt-client is taken as a reference here. GM01Q_Sequans Module is used for providing LTE co…

This example demonstrates displaying 2D graphics on a TFT display using the emWin graphics library and the AppWizard GUI design tool in FreeRTOS.

This example demonstrates how to use QSPI in execute-in-place (XIP) mode with external flash memory on the PSoC 6 MCU using ModusToolbox IDE.

This code example demonstrates the implementation of a simple BLE Environmental Sensing Profile.

This example demonstrates how to use the I2S hardware block in PSoC 6 MCU to interface with an audio codec.

Deprecated. Use https://github.com/Infineon/mtb-example-usb-device-hid-generic. This example demonstrates how to configure the USB block in a PSoC 6 MCU as a Human Interface Device (HID). The device enumerates as a Generic HID device.

mtb-example-usb-device-cdc-echo

This is a minimal starter dual-CPU security application template for PSoC™ 62/63 MCU devices. This code example is meant to be a companion to the AN221111 – PSoC™ 6 MCU: Designing a secured system application note. It demonstrates the following features to create a secured system as explained in the application note.