Calculate
Chysn edited this page Aug 10, 2018
·
2 revisions
Calculate is a series of utilities for performing arithmetical operations on two CV inputs.
Controls
- Digital Ins: Clock input for Channel 1 and Channel 2, to hold input voltage or clocked random voltage
- CV Ins: Calculation operand CV values
- Outputs: A/C Channel 1 result, B/D Channel 2 result
- Encoder Push: Switch cursor between Channel 1 and Channel 2 operator selection
- Encoder Turn: Select operator
The following operators are available:
- Min: The result is the lower voltage of the two operands
- Max: The result is the higher voltage of the two operands
- Sum: The result is the sum of the two operands, up to 5 volts
- Diff: The result is the absolute value of the difference between the two operands
- Mean: The result is the mean (average) of the two operands (that is, Sum divided by 2)
- S&H: When the channel is clocked, the output is held at the voltage of the corresponding input
- Rnd: A random value between 0 and 5 volts appears at the corresponding output. When the channel is clocked, a random value is held at the corresponding output until the next clock. To reset the input (that is, to turn off clocked operation), place the cursor on the Rnd operator and turn the encoder. If you turn the encoder clockwise, clocked operation will be turned off without changing away from the Rnd operator. When Rnd is clocked, a clock icon will appear to the right of the operator selector.
© 2018-2022, Jason Justian and Beige Maze Laboratories. This wiki's text is under the MIT License as described under License on the Home page.