Patches for the DSI touchscreen being shifted by 1 pixel #5840
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Add reset GPIO support. The reset GPIO is cleared after supply regulator was enabled, and set before supply regulator is disabled. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Robert Foss <rfoss@kernel.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230530192805.648646-2-marex@denx.de
…nable Move the register programming part, which actually enables the bridge and makes it push data out of its DPI side, into the enable callback. The DSI host like DSIM may not be able to transmit commands in pre_enable, moving the register programming into enable assures it can transmit commands. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230615201902.566182-1-marex@denx.de
Switch the bridge driver over to atomic ops. No functional change. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230615201902.566182-2-marex@denx.de
The register content and behavior is very similar to TC358764 VP_CTRL. All the bits except for unknown bit 6 also seem to match, even though the datasheet is just not available. Add a comment and reuse the bit definitions. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230615201902.566182-4-marex@denx.de
Add support for handling the HS/VS sync signals polarity in the bridge driver, otherwise e.g. DSIM bridge feeds the TC358762 inverted polarity sync signals and the image is shifted to the left, up, and wobbly. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230615201902.566182-5-marex@denx.de
The autodetection of resolution/timing by the TC358762 can lead to the display being shifted by a pixel or two. Program the TC358762 with the requested mode timing so that it can reproduce it accurately. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
The value was supposedly copied from the firmware via panel-raspberrypi-touchscreen, but it was copied incorrectly. The firmware has but the timings here ended up as just 46. Correct them to 44. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
https://forums.raspberrypi.com/viewtopic.php?t=361866
I've backported the patches from mainline, but one actually looks to break things and hence has a revert.
It then also passes the DPI timings to the TC358762, and corrects the panel timings.