Skip to content

ZTE Nubia Red Magic 6 6 Pro 6s 6s Pro

MrHereAndThere edited this page Nov 21, 2023 · 10 revisions

Device

AOSP boots, WiFi, cellular data works, sound works

Steps to install

PWR + VOL+ --> Recovery

PWR + VOL- --> Bootloader

  • Unlock bootloader in fastboot mode (vbmeta.img and vbmeta_system.img are taken from the STOCK ROM, or it will bootloop!):
    $ fastboot flashing unlock
    $ fastboot --disable-verification --disable-verity flash vbmeta vbmeta.img
    $ fastboot --disable-verification --disable-verity flash vbmeta_system vbmeta_system.img
    
    WARNING: Unlocking will VOID YOUR WARRANTY and make fingerprint UNUSABLE! You may try this to recover fingerprint: https://forum.xda-developers.com/t/guide-for-calibration-finger-print-after-loss-data-calibration.4132961/ WITH STOCK ROM, to see if it worked!
  • Enable ADB from stock ROM
  • Enter fastbootd mode from adb:
    $ adb reboot fastboot
    
  • Or enter fastbootd mode from fastboot:
    $ fastboot reboot fastboot
    
  • Flash this image with the fastboot utility:
    $ fastboot flash system system-td-arm64-ab-vanilla.img 
    
  • Reboot (or wipe device from stock recovery).

Hardware support

Component Comment
Camera Works
Speaker / Mic Works better with "Qualcomm features / Use alternative audio policy"
Headphone Works
USB DAC Works
Type-C DP Alt mode Works
GPS Works
Bluetooth Works
NFC ** Works (Global version)
WiFi Works
SIM / Mobile Data / Voice Works
Tethering Works
Proximity Sensor Works
Accelerometer / Gyroscope Works
VoLTE Not working (China Telecom) (Works with steps in https://github.com/phhusson/treble_experimentations/issues/1681, but not persisted across reboots)
RCS Message * Works
Fingerprint * Works
Brightness Works (Select "Set alternative brightness curve" and "Force alternative backlight scale" in phh setting > misc features > backlight)
Auto Brightness * Works
Offline Charging Works
Quick Charging Works
Fan Control * Works with "Nubia features / FAN speed" (Supported auto start/stop depending on charging state)
Logo LED Not working
RGB LEDs Works with "Nubia features / REDMAGIC RGB"
Display Refreshing Rate Supports 60/90/120/144/165Hz with "Misc features / Force FPS"
Double Tap To Wake Up (dt2w) * Works with "Nubia features / Enable DT2W"
Shoulder Buttons/triggers * Works (need 3rd app to map key. (tested with Octopus))
Back Panel Button Not working
Side Switch Not working
Vibration Works

* (TrebleDroid Android >= 14)

** The Chinese version doesn't have NFC. If you want to stop hwmanager from flooring log with (init: try to start nfc):

  • Root with magisk and install module magic_overlayfs.
  • Then open termux and run cmd: su -mm -c magic_remount_rw to enable r/w.
  • Open any file explorer and go to /odm/etc/vintf/ then remove manifest_nfc.xml.
  • Next, go to /odm/etc/permissions/sku_nfc/ and remove all files starting with android.hardware.nfc.

Tweaks

Name Comment
Rounded corners Set "Misc features / Set rounded corners diameter" to 30~40 and reboot
Boost CPU For faster fingerprint scanning
DTS:X ultra Need rooted and install this magisk module DTSX-Ultra-ZTE-A2020G-Pro-Magisk-Module

Notes

  1. You can re-lock your bootloader with stock ROM to restore your fingerprint. Back up your persist partition.
  2. Nubia is using the test key(external/avb/test/data/testkey_rsa4096.pem) to sign boot, vendor_boot, dtbo and odm partitions. You can create a new vbmeta.img with this key from AOSP and keep Magisk with a locked bootloader, also get the working fingerprint.
  3. Unbrick tool (Enter EDL mode (in bootloader, screen will turn black), Open miflashtool > select images folder and click "flash". After finish hold power button 10-15s to restart. Then select format userdata):

Tested By:

  • notsyncing - NX669J(CN), AOSP 11.0 v302 - 2021/03/12 - Template created by @zguithues and @hackintosh5
  • boydaihungst - NX669J(CN), TrebleDroid AOSP 14.0 2023/10/21
Clone this wiki locally