Skip to content

Samsung Galaxy Tab S4 10.5

M6R1ARTY edited this page Apr 16, 2020 · 1 revision

Samsung Galaxy Tab S4 (SM-T83X)

Device

Everything works, except stereo sound and s-pen optimizations.

Steps to install

  1. Flash ARK4 firmware. This is the one i tested with, newer versions should also be fine but i cannot guarantee.
    You can get the German T835XXU2ARK4 firmware (Oreo) here:
    https://www.sammobile.com/samsung/galaxy-tab-s4/firmware/SM-T835/DBT/
    That website also includes instructions about flashing the device using Odin, which is a windows application. Unfortunately, heimdall (https://glassechidna.com.au/heimdall/) does not support this device.

  2. install TWRP: https://twrp.me/samsung/samsunggalaxytabs4qcom.html
    You can use Odin to install TWRP. Remember to boot immediately into recovery after flashing TWRP and wipe userdata, otherwise the stock recovery image may be re-flashed when you boot the stock system image.

  3. Flash modesty kernel from here
    The modesty kernel has updated fstab entries in its device-tree that disable verity checks. The GSI won't boot unless the system-image verity check is disabled.

  4. reboot into TWRP and flash an oreo arm64 a-only gsi:

# use the TWRP ui to mount /data.  You may need to do Wipe \ Format Data first.
$ adb shell mkdir -p /data/local/tmp
$ adb push system-arm64-aonly-gapps-su.img /data/local/tmp
# now use the TWRP ui to flash this image (it is under the "Install" menu)
# reboot

Hardware support

Component Comment
Camera Working
Speaker / Mic Mic working, Speaker: mono, only bottom speaker
Bluetooth Working
WiFi Working
SIM / Mobile Data / Voice Working
VoLTE Working
Fingerprint N/A - Samsung Face Unlock does not work either (obviously)
NFC Working
Offline Charging Working
Other feature S-Pen works, displays as Mouse pointer

Fixes:

S-Pen Mouse pointer:

Add the following line to /system/usr/idc/sec_e-pen.idc touch.deviceType=touchscreen

Lock-Screen Rotation

Add the following line to /system/build.prop lockscreen.rot_override=true (this no longer seems to be necessary) Make sure to set permissions of /system/build.prop to 0600 otherwise you will get stuck at the boot animation. (this no longer seems to be necessary)

Tested By: @mKenfenheuer - SM-T835 (Germany), Firmware Version ARK4 - 08.05.2019

Updated by @jamuir

Template created by @zguithues and @hackintosh5

Clone this wiki locally