LEDgoes BatteryPOWAH
Stephen Wylie edited this page Mar 2, 2014
·
3 revisions
The Git repository contains a board file compatible with Eagle CAD software version 6.5.
The Battery POWAH board is a convenient way to power your LEDgoes matrix as well as personal projects. Stay tuned here for more details on it!
The following materials are required for Battery POWAH: (work in progress)
- 1 Battery POWAH Boost/Charge Board
- 1 TI TPS61032 boost converter chip (U1)
- 1 PTC-1812 fuse (FUSE)
- 1 LTC4054 charge chip
- 1 2N7002 transistor (D1)
- 4 0603 SMD LEDs (ON, STBY, CHG, LO_BATT)
- 1 Murata SMD capacitor 1uF 25V 20% tol. PN# GRM188R61E105MA12D (C1_C)
- 1 TDK SMD capacitor 2.2uF 16V 20% tol. PN# C1608X5R1C225M080AB (C2_B)
- Several other resistors & capacitors (ideally use 1/4-watt resistors)
- 1 6.8uH inductor (L1)
- 1 Micro USB connector, details TBA
- 1 gigantic switch
- 1 JST connector for the battery terminals
- 1 2.54mm 6-pin right-angle male header
- 1 2.54mm 6-pin right-angle female header
- Etc.