Merge remote-tracking branch 'stable/linux-6.8.y' into v6.8+

Documentation/admin-guide/hw-vuln/spectre.rst

@@ -439,12 +439,12 @@ The possible values in this file are:
    - System is protected by retpoline
  * - BHI: BHI_DIS_S
    - System is protected by BHI_DIS_S
- * - BHI: SW loop; KVM SW loop
+ * - BHI: SW loop, KVM SW loop
    - System is protected by software clearing sequence
- * - BHI: Syscall hardening
-   - Syscalls are hardened against BHI
- * - BHI: Syscall hardening; KVM: SW loop
-   - System is protected from userspace attacks by syscall hardening; KVM is protected by software clearing sequence
+ * - BHI: Vulnerable
+   - System is vulnerable to BHI
+ * - BHI: Vulnerable, KVM: SW loop
+   - System is vulnerable; KVM is protected by software clearing sequence
 
 Full mitigation might require a microcode update from the CPU
 vendor. When the necessary microcode is not available, the kernel will
@@ -661,18 +661,14 @@ kernel command line.
 	spectre_bhi=
 
 		[X86] Control mitigation of Branch History Injection
-		(BHI) vulnerability. Syscalls are hardened against BHI
-		regardless of this setting. This setting affects the deployment
+		(BHI) vulnerability.  This setting affects the deployment
 		of the HW BHI control and the SW BHB clearing sequence.
 
 		on
-			unconditionally enable.
+			(default) Enable the HW or SW mitigation as
+			needed.
 		off
-			unconditionally disable.
-		auto
-			enable if hardware mitigation
-			control(BHI_DIS_S) is available, otherwise
-			enable alternate mitigation in KVM.
+			Disable the mitigation.
 
 For spectre_v2_user see Documentation/admin-guide/kernel-parameters.txt
 

Documentation/admin-guide/kernel-parameters.txt

@@ -3422,6 +3422,7 @@
 					       reg_file_data_sampling=off [X86]
 					       retbleed=off [X86]
 					       spec_store_bypass_disable=off [X86,PPC]
+					       spectre_bhi=off [X86]
 					       spectre_v2_user=off [X86]
 					       srbds=off [X86,INTEL]
 					       ssbd=force-off [ARM64]
@@ -6044,16 +6045,13 @@
 			See Documentation/admin-guide/laptops/sonypi.rst
 
 	spectre_bhi=	[X86] Control mitigation of Branch History Injection
-			(BHI) vulnerability. Syscalls are hardened against BHI
-			reglardless of this setting. This setting affects the
+			(BHI) vulnerability.  This setting affects the
 			deployment of the HW BHI control and the SW BHB
 			clearing sequence.
 
-			on   - unconditionally enable.
-			off  - unconditionally disable.
-			auto - (default) enable hardware mitigation
-			       (BHI_DIS_S) if available, otherwise enable
-			       alternate mitigation in KVM.
+			on   - (default) Enable the HW or SW mitigation
+			       as needed.
+			off  - Disable the mitigation.
 
 	spectre_v2=	[X86] Control mitigation of Spectre variant 2
 			(indirect branch speculation) vulnerability.

Documentation/devicetree/bindings/display/msm/qcom,sm8150-mdss.yaml

@@ -53,6 +53,15 @@ patternProperties:
       compatible:
         const: qcom,sm8150-dpu
 
+  "^displayport-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        contains:
+          const: qcom,sm8150-dp
+
   "^dsi@[0-9a-f]+$":
     type: object
     additionalProperties: true

Makefile

@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 6
 PATCHLEVEL = 8
-SUBLEVEL = 6
+SUBLEVEL = 7
 EXTRAVERSION =
 NAME = Hurr durr I'ma ninja sloth
 

arch/arm/boot/dts/nxp/imx/imx7s-warp.dts

@@ -210,6 +210,7 @@
 				remote-endpoint = <&mipi_from_sensor>;
 				clock-lanes = <0>;
 				data-lanes = <1>;
+				link-frequencies = /bits/ 64 <330000000>;
 			};
 		};
 	};

arch/arm/mach-omap2/board-n8x0.c

@@ -79,10 +79,8 @@ static struct musb_hdrc_platform_data tusb_data = {
 static struct gpiod_lookup_table tusb_gpio_table = {
 	.dev_id = "musb-tusb",
 	.table = {
-		GPIO_LOOKUP("gpio-0-15", 0, "enable",
-			    GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-48-63", 10, "int",
-			    GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("gpio-0-31", 0, "enable", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("gpio-32-63", 26, "int", GPIO_ACTIVE_HIGH),
 		{ }
 	},
 };
@@ -140,25 +138,24 @@ static int slot1_cover_open;
 static int slot2_cover_open;
 static struct device *mmc_device;
 
-static struct gpiod_lookup_table nokia8xx_mmc_gpio_table = {
+static struct gpiod_lookup_table nokia800_mmc_gpio_table = {
 	.dev_id = "mmci-omap.0",
 	.table = {
 		/* Slot switch, GPIO 96 */
-		GPIO_LOOKUP("gpio-80-111", 16,
-			    "switch", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("gpio-96-127", 0, "switch", GPIO_ACTIVE_HIGH),
 		{ }
 	},
 };
 
 static struct gpiod_lookup_table nokia810_mmc_gpio_table = {
 	.dev_id = "mmci-omap.0",
 	.table = {
+		/* Slot switch, GPIO 96 */
+		GPIO_LOOKUP("gpio-96-127", 0, "switch", GPIO_ACTIVE_HIGH),
 		/* Slot index 1, VSD power, GPIO 23 */
-		GPIO_LOOKUP_IDX("gpio-16-31", 7,
-				"vsd", 1, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("gpio-0-31", 23, "vsd", 1, GPIO_ACTIVE_HIGH),
 		/* Slot index 1, VIO power, GPIO 9 */
-		GPIO_LOOKUP_IDX("gpio-0-15", 9,
-				"vio", 1, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("gpio-0-31", 9, "vio", 1, GPIO_ACTIVE_HIGH),
 		{ }
 	},
 };
@@ -415,8 +412,6 @@ static struct omap_mmc_platform_data *mmc_data[OMAP24XX_NR_MMC];
 
 static void __init n8x0_mmc_init(void)
 {
-	gpiod_add_lookup_table(&nokia8xx_mmc_gpio_table);
-
 	if (board_is_n810()) {
 		mmc1_data.slots[0].name = "external";
 
@@ -429,6 +424,8 @@ static void __init n8x0_mmc_init(void)
 		mmc1_data.slots[1].name = "internal";
 		mmc1_data.slots[1].ban_openended = 1;
 		gpiod_add_lookup_table(&nokia810_mmc_gpio_table);
+	} else {
+		gpiod_add_lookup_table(&nokia800_mmc_gpio_table);
 	}
 
 	mmc1_data.nr_slots = 2;

arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi

@@ -41,7 +41,7 @@ conn_subsys: bus@5b000000 {
 		interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
 		fsl,usbphy = <&usbphy1>;
 		fsl,usbmisc = <&usbmisc1 0>;
-		clocks = <&usb2_lpcg 0>;
+		clocks = <&usb2_lpcg IMX_LPCG_CLK_6>;
 		ahb-burst-config = <0x0>;
 		tx-burst-size-dword = <0x10>;
 		rx-burst-size-dword = <0x10>;
@@ -58,7 +58,7 @@ conn_subsys: bus@5b000000 {
 	usbphy1: usbphy@5b100000 {
 		compatible = "fsl,imx7ulp-usbphy";
 		reg = <0x5b100000 0x1000>;
-		clocks = <&usb2_lpcg 1>;
+		clocks = <&usb2_lpcg IMX_LPCG_CLK_7>;
 		power-domains = <&pd IMX_SC_R_USB_0_PHY>;
 		status = "disabled";
 	};
@@ -67,8 +67,8 @@ conn_subsys: bus@5b000000 {
 		interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
 		reg = <0x5b010000 0x10000>;
 		clocks = <&sdhc0_lpcg IMX_LPCG_CLK_4>,
-			 <&sdhc0_lpcg IMX_LPCG_CLK_0>,
-			 <&sdhc0_lpcg IMX_LPCG_CLK_5>;
+			 <&sdhc0_lpcg IMX_LPCG_CLK_5>,
+			 <&sdhc0_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "ahb", "per";
 		power-domains = <&pd IMX_SC_R_SDHC_0>;
 		status = "disabled";
@@ -78,8 +78,8 @@ conn_subsys: bus@5b000000 {
 		interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
 		reg = <0x5b020000 0x10000>;
 		clocks = <&sdhc1_lpcg IMX_LPCG_CLK_4>,
-			 <&sdhc1_lpcg IMX_LPCG_CLK_0>,
-			 <&sdhc1_lpcg IMX_LPCG_CLK_5>;
+			 <&sdhc1_lpcg IMX_LPCG_CLK_5>,
+			 <&sdhc1_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "ahb", "per";
 		power-domains = <&pd IMX_SC_R_SDHC_1>;
 		fsl,tuning-start-tap = <20>;
@@ -91,8 +91,8 @@ conn_subsys: bus@5b000000 {
 		interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
 		reg = <0x5b030000 0x10000>;
 		clocks = <&sdhc2_lpcg IMX_LPCG_CLK_4>,
-			 <&sdhc2_lpcg IMX_LPCG_CLK_0>,
-			 <&sdhc2_lpcg IMX_LPCG_CLK_5>;
+			 <&sdhc2_lpcg IMX_LPCG_CLK_5>,
+			 <&sdhc2_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "ahb", "per";
 		power-domains = <&pd IMX_SC_R_SDHC_2>;
 		status = "disabled";

arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi

@@ -27,8 +27,8 @@ dma_subsys: bus@5a000000 {
 		#size-cells = <0>;
 		interrupts = <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-parent = <&gic>;
-		clocks = <&spi0_lpcg 0>,
-			 <&spi0_lpcg 1>;
+		clocks = <&spi0_lpcg IMX_LPCG_CLK_0>,
+			 <&spi0_lpcg IMX_LPCG_CLK_4>;
 		clock-names = "per", "ipg";
 		assigned-clocks = <&clk IMX_SC_R_SPI_0 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <60000000>;
@@ -43,8 +43,8 @@ dma_subsys: bus@5a000000 {
 		#size-cells = <0>;
 		interrupts = <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-parent = <&gic>;
-		clocks = <&spi1_lpcg 0>,
-			 <&spi1_lpcg 1>;
+		clocks = <&spi1_lpcg IMX_LPCG_CLK_0>,
+			 <&spi1_lpcg IMX_LPCG_CLK_4>;
 		clock-names = "per", "ipg";
 		assigned-clocks = <&clk IMX_SC_R_SPI_1 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <60000000>;
@@ -59,8 +59,8 @@ dma_subsys: bus@5a000000 {
 		#size-cells = <0>;
 		interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-parent = <&gic>;
-		clocks = <&spi2_lpcg 0>,
-			 <&spi2_lpcg 1>;
+		clocks = <&spi2_lpcg IMX_LPCG_CLK_0>,
+			 <&spi2_lpcg IMX_LPCG_CLK_4>;
 		clock-names = "per", "ipg";
 		assigned-clocks = <&clk IMX_SC_R_SPI_2 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <60000000>;
@@ -75,8 +75,8 @@ dma_subsys: bus@5a000000 {
 		#size-cells = <0>;
 		interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-parent = <&gic>;
-		clocks = <&spi3_lpcg 0>,
-			 <&spi3_lpcg 1>;
+		clocks = <&spi3_lpcg IMX_LPCG_CLK_0>,
+			 <&spi3_lpcg IMX_LPCG_CLK_4>;
 		clock-names = "per", "ipg";
 		assigned-clocks = <&clk IMX_SC_R_SPI_3 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <60000000>;
@@ -144,8 +144,8 @@ dma_subsys: bus@5a000000 {
 		compatible = "fsl,imx8qxp-pwm", "fsl,imx27-pwm";
 		reg = <0x5a190000 0x1000>;
 		interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&adma_pwm_lpcg 1>,
-			 <&adma_pwm_lpcg 0>;
+		clocks = <&adma_pwm_lpcg IMX_LPCG_CLK_4>,
+			 <&adma_pwm_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "per";
 		assigned-clocks = <&clk IMX_SC_R_LCD_0_PWM_0 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <24000000>;
@@ -377,8 +377,8 @@ dma_subsys: bus@5a000000 {
 		reg = <0x5a880000 0x10000>;
 		interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-parent = <&gic>;
-		clocks = <&adc0_lpcg 0>,
-			 <&adc0_lpcg 1>;
+		clocks = <&adc0_lpcg IMX_LPCG_CLK_0>,
+			 <&adc0_lpcg IMX_LPCG_CLK_4>;
 		clock-names = "per", "ipg";
 		assigned-clocks = <&clk IMX_SC_R_ADC_0 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <24000000>;
@@ -392,8 +392,8 @@ dma_subsys: bus@5a000000 {
 		reg = <0x5a890000 0x10000>;
 		interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-parent = <&gic>;
-		clocks = <&adc1_lpcg 0>,
-			 <&adc1_lpcg 1>;
+		clocks = <&adc1_lpcg IMX_LPCG_CLK_0>,
+			 <&adc1_lpcg IMX_LPCG_CLK_4>;
 		clock-names = "per", "ipg";
 		assigned-clocks = <&clk IMX_SC_R_ADC_1 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <24000000>;
@@ -406,8 +406,8 @@ dma_subsys: bus@5a000000 {
 		reg = <0x5a8d0000 0x10000>;
 		interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-parent = <&gic>;
-		clocks = <&can0_lpcg 1>,
-			 <&can0_lpcg 0>;
+		clocks = <&can0_lpcg IMX_LPCG_CLK_4>,
+			 <&can0_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "per";
 		assigned-clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <40000000>;
@@ -427,8 +427,8 @@ dma_subsys: bus@5a000000 {
 		 * CAN1 shares CAN0's clock and to enable CAN0's clock it
 		 * has to be powered on.
 		 */
-		clocks = <&can0_lpcg 1>,
-			 <&can0_lpcg 0>;
+		clocks = <&can0_lpcg IMX_LPCG_CLK_4>,
+			 <&can0_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "per";
 		assigned-clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <40000000>;
@@ -448,8 +448,8 @@ dma_subsys: bus@5a000000 {
 		 * CAN2 shares CAN0's clock and to enable CAN0's clock it
 		 * has to be powered on.
 		 */
-		clocks = <&can0_lpcg 1>,
-			 <&can0_lpcg 0>;
+		clocks = <&can0_lpcg IMX_LPCG_CLK_4>,
+			 <&can0_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "per";
 		assigned-clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <40000000>;

arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi

@@ -25,8 +25,8 @@ lsio_subsys: bus@5d000000 {
 		compatible = "fsl,imx27-pwm";
 		reg = <0x5d000000 0x10000>;
 		clock-names = "ipg", "per";
-		clocks = <&pwm0_lpcg 4>,
-			 <&pwm0_lpcg 1>;
+		clocks = <&pwm0_lpcg IMX_LPCG_CLK_6>,
+			 <&pwm0_lpcg IMX_LPCG_CLK_1>;
 		assigned-clocks = <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <24000000>;
 		#pwm-cells = <3>;
@@ -38,8 +38,8 @@ lsio_subsys: bus@5d000000 {
 		compatible = "fsl,imx27-pwm";
 		reg = <0x5d010000 0x10000>;
 		clock-names = "ipg", "per";
-		clocks = <&pwm1_lpcg 4>,
-			 <&pwm1_lpcg 1>;
+		clocks = <&pwm1_lpcg IMX_LPCG_CLK_6>,
+			 <&pwm1_lpcg IMX_LPCG_CLK_1>;
 		assigned-clocks = <&clk IMX_SC_R_PWM_1 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <24000000>;
 		#pwm-cells = <3>;
@@ -51,8 +51,8 @@ lsio_subsys: bus@5d000000 {
 		compatible = "fsl,imx27-pwm";
 		reg = <0x5d020000 0x10000>;
 		clock-names = "ipg", "per";
-		clocks = <&pwm2_lpcg 4>,
-			 <&pwm2_lpcg 1>;
+		clocks = <&pwm2_lpcg IMX_LPCG_CLK_6>,
+			 <&pwm2_lpcg IMX_LPCG_CLK_1>;
 		assigned-clocks = <&clk IMX_SC_R_PWM_2 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <24000000>;
 		#pwm-cells = <3>;
@@ -64,8 +64,8 @@ lsio_subsys: bus@5d000000 {
 		compatible = "fsl,imx27-pwm";
 		reg = <0x5d030000 0x10000>;
 		clock-names = "ipg", "per";
-		clocks = <&pwm3_lpcg 4>,
-			 <&pwm3_lpcg 1>;
+		clocks = <&pwm3_lpcg IMX_LPCG_CLK_6>,
+			 <&pwm3_lpcg IMX_LPCG_CLK_1>;
 		assigned-clocks = <&clk IMX_SC_R_PWM_3 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <24000000>;
 		#pwm-cells = <3>;

arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi

@@ -14,6 +14,7 @@
 		pinctrl-0 = <&pinctrl_usbcon1>;
 		type = "micro";
 		label = "otg";
+		vbus-supply = <&reg_usb1_vbus>;
 		id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
 
 		port {
@@ -183,7 +184,6 @@
 };
 
 &usb3_phy0 {
-	vbus-supply = <&reg_usb1_vbus>;
 	status = "okay";
 };