Wireleap relay

Wireleap is a decentralized communications protocol and open-source software designed with the goal of providing unrestricted access to the internet from anywhere.

The Wireleap relay software is used to relay Wireleap protocol traffic from clients and other relays.

This repository is for the Wireleap relay.

Installation

The recommended installation procedure starts with the creation of a system user account specifically for the wireleap-relay.

useradd -rUm --home-dir /opt/wireleap-relay wireleap-relay

Next, download and verify the latest release. Alternatively, you can build from source.

su -l wireleap-relay

# download binary and hashfile for Linux
DIST="https://github.com/wireleap/relay/releases/latest/download"
curl -LO $DIST/wireleap-relay_linux-amd64
curl -LO $DIST/wireleap-relay_linux-amd64.hash

# cryptographically verify integrity of the hashfile
gpg --recv-keys 693C86E9DECA9D07D79FF9D22ECD72AD056012E1
gpg --list-keys --with-fingerprint builds@wireleap.com
gpg --verify wireleap-relay_linux-amd64.hash

# verify checksum hash
sha512sum -c wireleap-relay_linux-amd64.hash

# rename the binary and set executable flag
mv wireleap-relay_linux-amd64 wireleap-relay
chmod +x wireleap-relay

# generate certificates and a keypair specific for the relay
./wireleap-relay init

# create a configuration file (see the next section)
$EDITOR config.json

Once configured, proceed to the testing and/or production section.

Configuration

Relays are configured through the file config.json, which includes service contracts the relay supports along with a specific configuration per each contract as well as the daemon configuration. Currently supported variables:

Key	Type	Comment
address	`string`	address to bind to (`host:port`)
archive_dir	`string`	path to archive submitted sharetokens (optional)
auto_submit_interval	`string`	interval between sharetoken submission retries (optional)
network_usage.global_limit	`string`	maximum routed traffic in defined period (optional)
network_usage.timeframe	`string`	routed traffic measurement fixed time window (optional)
network_usage.write_interval	`string`	interval between autosaves (optional)
network_usage.archive_dir	`string`	path of the archived statistics directory (optional)
contracts.X	`string`	service contract endpoint url
contracts.X.address	`string`	`wireleap://host:port[/uri]`
contracts.X.role	`string`	`fronting` `entropic` `backing`
contracts.X.key	`string`	`user:password` format enrollment key if required
contracts.X.network_usage_limit	`string`	maximum routed traffic for this contract
contracts.X.upgrade_channel	`string`	upgrade channel (default: `"default"`)
rest_api.address	`string`	api rest address (`host:port` or `file:///path`, optional)
rest_api.socket_umask	`string`	unix socket permissions (default: `600`)
auto_upgrade	`bool`	automatically upgrade this relay (default: `true`)

{
    "address": "0.0.0.0:13499",
    "archive_dir": "archive/sharetokens",
    "auto_submit_interval": "5m0s",
    "network_usage": {
        "global_limit": "2TB",
        "timeframe": "30d",
        "write_interval": "5m0s",
        "archive_dir": "archive/netstats"
    },
    "contracts": {
        "https://contract1.example.com": {
            "address": "wireleap://relay1.example.com:13499",
            "role": "backing",
            "key": "backing:secretkey"
        },
        "https://contract2.example.com": {
            "address": "wireleap://relay1.example.com:13499",
            "role": "entropic",
            "network_usage_limit": "1TB"
        }
    },
    "rest_api": {
        "address": "file:///run/wireleap",
        "socket_umask": "660"
    },
    "auto_upgrade": true
}

Note: A fronting relay generally requires a webserver proxying configuration.

Web server proxying

When the fronting relay daemon is behind a proxying web server that supports HTTP/2, such as Apache or Nginx, the web server can be configured to proxy connections to the daemon while simultaneously serving the regular website traffic.

Protocol encapsulation

A HTTP/2 connection is used as transport and the individual connections are streams inside it. The HTTP/2 connection is opaque and valid traffic for the webserver to proxy. Once the proxying webserver has performed the TLS and H/2 negotiation (settings frame, etc.) and bidirectional streaming data transfer is setup, the encapsulated traffic is seamlessly proxied to and from the relay daemon address.

Fronting relay configuration example

{
    "address": "127.0.0.1:13499",
    "archive_dir": "archive/sharetokens",
    "auto_submit_interval": "5m0s",
    "contracts": {
        "https://contract1.example.com": {
            "address": "wireleap://www.example.com:443/wireleap",
            "role": "fronting"
        }
    }
}

Apache configuration example

<IfModule ssl_module>
 <IfModule http2_module>
   Listen 443 https
   Protocols h2
   <VirtualHost *:443>
     ServerAdmin admin@example.com
     SSLCertificateFile /path/to/crt
     SSLCertificateKeyFile /path/to/key
     SSLEngine on
     SSLProxyEngine on
     SSLProxyCheckPeerName off
     DocumentRoot /var/www/html

     <Location "/wireleap">
       <IfModule mod_reqtimeout.c>
         RequestReadTimeout handshake=0 header=0 body=0
       </IfModule>
       ProxyPass "h2://127.0.0.1:13499"
       ProxyPassReverse "h2://127.0.0.1:13499"
     </Location>
   </VirtualHost>
 </IfModule>
</IfModule>

Nginx configuration example

server {
    listen 443 ssl http2;
    server_name www.example.com;
    ssl_certificate /path/to/fullchain.pem;
    ssl_certificate_key /path/to/privkey.pem;
    ssl_protocols TLSv1.3;

    location /wireleap {
        grpc_pass grpcs://127.0.0.1:13499;
        grpc_ssl_protocols TLSv1.3;
    }
}

Network usage and limits

The Wireleap relay software supports tracking the amount of traffic it relays, both globally and per contract. Using this data, it is also possible to limit the amount of the traffic it will relay during a configured period, also, both globally and per contract.

This is particularly useful for two reasons. To not exceed any hosting bandwidth quota limits (which may incur unexpected charges), and to allow the allocation of specific amounts of bandwidth per supported contract.

Configuration

Key	Type	Comment
network_usage.global_limit	`string`	maximum routed traffic in defined period
network_usage.timeframe	`string`	routed traffic measurement fixed time window
network_usage.write_interval	`string`	interval between autosaves
network_usage.archive_dir	`string`	path of the archived statistics directory
contracts.X.network_usage_limit	`string`	maximum routed traffic for this contract

network_usage.timeframe works as a enable flag, if not set the network usage measurement (and limit) is entirely disabled. If modified, the current timeframe will be recalculated using the saved stating date. Values will only be reset if the saved timeframe is already ended.

To manually reset the statistics, please remove the ./stats.json file.

Timeframes and records

Timeframes are configured in the duration.T format. When a new timeframe is started, the previous stats are archived. During the timeframe, the network usage stats are written to disk at the specified interval. It is also possible to trigger a write by sending the SIGUSR2 signal:

su -l wireleap-relay
kill -USR2 $(cat wireleap_relay.pid)
cat stats.json | jq -r ".contract_stats | map(.network_bytes) | add"

Enrollments

If a contract specific limit is reached, the relay will unenroll from that contract. If the global limit is reached irrelevant to specific contract limits, the relay will unenroll from all configured contracts. Once the current measurement period ends, the relay will re-enroll into the configured contracts.

Thresholds

Limits are configured in the datasize.ByteSize format. In order to not abruptly disconnect clients using the relay when a limit is hit, but rather initiate a smooth transition for clients to other relays, as well as account for a margin of error, two thresholds have been implemented:

Threshold	Value	Comment
`soft-limit`	`90%`	Refuse new connections
`hard-limit`	`93%`	Close active connections

The soft-limit is used to prevent new clients from reaching the relay by refusing new connections and unenrolling the relay from the contract. It will be activated when 90% of contract specified limit is reached. If the hard-limit is reached and there are still active connections, they will be closed. It will be activated when 93% of the specified limit is reached.

It's important to note that the global limit does not support soft-limit, and if reached the relay will disconnect all clients and unenroll from all the contracts. If the relay is configured with only one contract, it is recommended to specify the contract limit in order to enable soft-limit functionality.

Measurement

The relay measures routed TCP streams only (client-relay, relay-relay, relay-clearnet). H/2, TCP (layer 4), IP (layer 3), and lower headers (LAN and physical point-to-point link scopes) are not accounted for. Other traffic such as relay-contract, relay-dir, relay upgrades, and anything else outside of the scope of Wireleap is not accounted for.

In other words, the network usage in-scope is wireleap traffic flowing through the relay. It should be relatively accurate, within a margin of error.

API REST

The Wireleap relay exposes an HTTP API REST on a unix socket or tcp port.

At this moment the API has very limited functionality, but it will be extened in the upcoming releases.

Configuration

Key	Type	Comment
rest_api.address	`string`	api rest address (`host:port` or `file:///path`)
rest_api.socket_umask	`string`	unix socket permissions (default: `600`)

Endpoints

Endpoint	Method	Purpose
`/api/status`	`GET`	network usage and cap statistics

Testing

Once configured, you can test that everything works by manually starting the daemon.

su -l wireleap-relay

# start the relay in the foreground (ctrl+c to stop)
./wireleap-relay start --fg

# or, in the background
./wireleap-relay start
./wireleap-relay status
cat wireleap-relay.log
./wireleap-relay stop

Production

Increase ulimit

The default ulimit -n value of 1024 on most systems would likely prove too low for running a production relay. Consider changing it to a higher value.

echo 'wireleap-relay soft nofile 65535' >> /etc/security/limits.conf
echo 'wireleap-relay hard nofile 65535' >> /etc/security/limits.conf

Daemon supervisor

To keep the relay process up and running at all times, the use of a process supervisor like systemd is recommended. The following is a suitable systemd unit file, which will watch the relay daemon process and restart it if it fails for any reason.

[Unit]
Description=Wireleap relay process
After=multi-user.target
StartLimitIntervalSec=200
StartLimitBurst=5

[Service]
Type=forking
User=wireleap-relay
Group=wireleap-relay
RootDirectory=/opt/wireleap-relay
ExecStartPre=-/wireleap-relay stop
ExecStart=/wireleap-relay start
ExecReload=/wireleap-relay reload
ExecStop=/wireleap-relay stop
Restart=on-failure
RestartSec=10
KillMode=process
BindReadOnlyPaths=/etc/ssl/certs/ca-certificates.crt /etc/resolv.conf
MountAPIVFS=on
ProtectProc=invisible
ProcSubset=pid
PrivateUsers=on
PrivateDevices=on

[Install]
WantedBy=multi-user.target

# create the systemd unit file and enable it
$EDITOR /etc/systemd/system/wireleap-relay.service
systemctl enable /etc/systemd/system/wireleap-relay.service

# start the service, check on its status
systemctl start wireleap-relay.service
systemctl status wireleap-relay.service

Settlement

A service contract defines the service parameters and facilitates disbursing funds provided by a customer to service providers in proportion to service provided based on proof of service.

The proof of service in question are the sharetokens accumulated by a relay when relaying user traffic.

Submitting sharetokens

Sharetokens are accumulated when relaying user traffic and automatically submitted to the contract upon servicekey expiration. If for some reason the submission fails, it will be retried based on the auto_submit_interval as defined in the relay configuration.

Note: Sharetokens need to be submitted to the contract during the submission window (from servicekey expiration plus settlement.submission_window) as defined by the service contract.

Checking status

Once sharetokens are submitted for settlement, their status can be queried with the balance command. When the settlement window closes and all verification checks are complete, the final calculation is performed. Based on the calculation, the relay's balance will be credited, also shown per the balance command.

Note: the available balance shown is the integer part of the real, internally stored balance of the relay. This ensures that settlement always results in a fair assignment of relay shares. It may also lead to sub-one cent balance increases under certain conditions which will not affect the available balance immediately but increase the internally stored balance.

su -l wireleap-relay

# show available balance, sharetokens awaiting settlement window,
# and last withdrawal from all contracts
./wireleap-relay balance

Initiating a withdrawal request

A relay operator may issue a withdrawal request up to or equal to their available balance.

su -l wireleap-relay

# show available balance
./wireleap-relay balance \
    --contract https://contract1.example.com

# request withdrawal
./wireleap-relay withdraw \
    --contract https://contract1.example.com \
    --destination acct_1032D82eZvKYlo2C \
    --amount 150

Information regarding the --destination can be obtained by visiting the link as defined in contract's payout.info.

curl -s https://contract1.example.com/info | jq -r '.payout.info'

Upgrade

The precompiled binary of wireleap-relay includes both automatic and manual upgrade functionality. Due to protocol versioning, it is highly recommended to keep relays up to date.

Automatic upgrades

When auto_upgrade is set to true or not present in the relay config.json, the relay will attempt automatic upgrades whenever it receives an upgrade notification from the directory during heartbeat on the upgrade channel specified in the enrollment config. If an upgrade fails, a best-effort rollback is performed and the affected version is skipped.

The relay upgrade channels supported by the directory and the respective latest versions are exposed via the directory's /info endpoint.

{
    "auto_upgrade": true,
    "contracts": {
        "https://contract1.example.com": {
            "upgrade_channel": "default"
        }
    }
}

Manual upgrades

The upgrade process is interactive so you will have the possibility to accept or decline based on the changelog for the new release version.

If the upgrade was successful, the old binary is not deleted but kept as wireleap-relay.prev for rollback purposes in case issues manifest post-upgrade.

If the upgrade was not successful, it is possible to skip the faulty version explicitly.

Note: since the .skip-upgrade-version file has to be valid JSON, the version number to be skipped should be quoted.

su -l wireleap-relay

# perform interactive upgrade
./wireleap-relay upgrade

# rollback if required
./wireleap-relay rollback

# skip upgrades to version 1.2.3
echo '"1.2.3"' > .skip-upgrade-version

Versioning

Releases are based on semantic versioning, and use the format MAJOR.MINOR.PATCH. While the MAJOR version is 0, MINOR version bumps are considered MAJOR bumps per the semver spec.

Git tags are used to specify the software version, which are manually assigned by tagging the relevant changelog entry. Only tagged versions are CI-built and released after all unit and integration tests have passed successfully.

Note: Locally built binaries will include a suffix in addition to the latest tagged version, consisting of the number of commits past the tag and the abbreviated hash of the HEAD commit.

Building

Note: If you would like to make changes to the source code, please following the contributing instructions instead.

Note: Custom built binaries do not support upgrade functionality.

Clone the repository

git clone https://github.com/wireleap/relay.git

Checkout the latest tagged version

For locally built binaries to match the latest stable wireleap version, you will need to check out the latest git tag prior to building as opposed to building from master.

cd relay
git pull --tags origin master
git checkout $(git describe `git rev-list --tags --max-count=1`)

Build the binary

It is recommended to build the binary using docker, as described below which uses the official golang docker image.

# for your host operating system
./contrib/docker/build-bin.sh build/

# for a specific target os (linux / darwin)
TARGET_OS=linux ./contrib/docker/build-bin.sh build/

# specify a cache for faster subsequent builds
mkdir -p build/.deps
DEPS_CACHE=build/.deps ./contrib/docker/build-bin.sh build/

If you prefer to use your host system instead of docker, you can do so with contrib/build-bin.sh provided you have the relevant dependencies installed.

Contributing

This flow is loosely based on the standard GitHub flow collaborative development model.

Collaboration between developers is facilitated via pull requests from topic branches towards the master branch, and pull request reviews are used to achieve consensus before merging the changes into the master branch.

A note about the master branch:

Anything in the master branch is deployable, builds successfully and is tested to work. The CI/CD system performs both integration and unit tests, but should be considered as only a filter to immediately highlight PRs which would break the master branch and therefore need to be either discarded or amended. Automated checks are no substitute for code review, so all PRs are manually reviewed prior to merge.
Direct commits to the master branch are prohibited, with the only exception being a core-dev pushing a signed git-tag signifying a release.

Fork, clone and setup upstream remote

The following instructions outline the recommended procedure for creating a fork of this repository in order to contribute changes.

Firstly, click the fork button at the top of the page. Once forked, clone your fork and set an upstream remote to keep track of changes.

git clone git@github.com:USERNAME/relay.git

cd relay
git remote add upstream git@github.com:wireleap/relay.git
git checkout master
git pull --tags upstream master
git config commit.gpgsign true

Create a feature branch and make your changes

Create a descriptively named topic branch based on the master branch. Please take care to only address one issue/bug/feature per pull request.

git checkout master
git pull --tags upstream master
git checkout -b DESCRIPTIVE_BRANCH_NAME

When making your changes, test and commit as you go. Try to make commits that capture an atomic change to the codebase. Source code should be documented where necessary and the rationale for changes included in commits should be clear.

If a commit resolves a known issue or relates to other commits or PRs, please refer to them.

Unit testing

The unit tests can either be run on your host or within docker using the official golang docker image.

# run unit tests on host
./contrib/run-tests.sh

# run unit tests in docker
./contrib/docker/run-tests.sh

# run unit tests in docker (specify cache for faster subsequent tests)
mkdir -p build/.deps
DEPS_CACHE=build/.deps ./contrib/docker/run-tests.sh

Rebase on master if needed

It can happen that as you were working on a feature, the state of the upstream/master branch has changed due to merging other pull requests. In this case, rebase your topic branch on top of the master branch. If needed, resolve merge conflicts.

git checkout master
git fetch upstream
git merge upstream/master
git rebase --interactive master DESCRIPTIVE_BRANCH_NAME

After every change to the git history of your topic branch, perform testing to avoid regressions.

Push changes and submit a pull request

When you think the topic branch is ready for merging, passes all tests, all changes are committed with appropriate commit messages, and your topic branch is based on the current state of the upstream/master branch, push them to the topic branch (not master) of your fork.

# push changes
git push origin DESCRIPTIVE_BRANCH_NAME

# if you have already pushed commits to a topic branch, and later
# performed a rebase on top of master, a force push will be required
git push --force origin DESCRIPTIVE_BRANCH_NAME

Once pushed, follow the link specified in the git push output. Give your changes a last-minute correctness check, and supply the high-level description of the changes.

Finally, click create pull request so the reviewers can review and approve the changes, or request modifications prior to performing the merge.

Review process and merge

The pull request may be approved or additional modifications might be requested by one of the reviewers. If modifications are requested, commit and push more changes to the same topic branch and they will be included in the original pull request until it is ultimately closed.

Branch protection rules are in place. They include:

Requiring all commits in PRs to be signed.
Requiring all integration and unit tests to complete successfully.
Requiring at least one approval from a core-dev.

If there is an issue with the proposed changes, modifications should be requested. For discussions on the rationale of certain choices in the code, GitHub comments in the respective files can be left for the author of the pull request to address.

Please note that every merged pull request is considered final and it is always better to hold off on merging a pull request than have to open another one correcting the changes from the first one. Additionally, it is also sometimes a good idea to create pull requests towards another PRs topic branch instead of master. This allows unifying multiple sets of changes from different developers within the scope of a single PR.

Merging changes that are not unanimously approved by all reviewers is not allowed unless special arrangements are in place (e.g. a reviewer is away and explicitly asked to not wait on them for merging changes).

Once the above is satisfied and all the reviewers have approved the changes, the last person who gives their approval and has merge permissions will close the pull request by merging it into the master branch. However, if the author of the pull request has merge permissions, they may perform the merge subject to the above.

License

The MIT License (MIT)

Name		Name	Last commit message	Last commit date
Latest commit History 100 Commits
.github/workflows		.github/workflows
api		api
changelogs		changelogs
contractmanager		contractmanager
contrib		contrib
filenames		filenames
relaycfg		relaycfg
relaylib		relaylib
relaystats		relaystats
restapi		restapi
stscheduler		stscheduler
sub		sub
testdata		testdata
version		version
wlnet/relay		wlnet/relay
.gitignore		.gitignore
API.md		API.md
CLI.md		CLI.md
LICENSE		LICENSE
README.md		README.md
go.mod		go.mod
go.sum		go.sum
main.go		main.go

License

wireleap/relay

Folders and files

Latest commit

History

Repository files navigation

Wireleap relay

Table of contents

Installation

Configuration

Web server proxying

Protocol encapsulation

Fronting relay configuration example

Apache configuration example

Nginx configuration example

Network usage and limits

API REST

Testing

Production

Increase ulimit

Daemon supervisor

Settlement

Submitting sharetokens

Checking status

Initiating a withdrawal request

Upgrade

Versioning

Building

Contributing

License

About

Resources

License

Stars

Watchers

Forks

Languages