Automated deployment @ 2023-07-28 16:19:05 Asia/Shanghai
Welcome to contribute! Add your topics and keywords in
topic.yml. You can also view historical data through the storage.
| Publish Date | Title | Authors | Code | Abstract | |
|---|---|---|---|---|---|
| 2023-07-27 | How to Train Your YouTube Recommender | Alexander Liu et.al. | 2307.14551v1 | null | YouTube provides features for users to indicate disinterest when presented with unwanted recommendations, such as the Not interested'' and Don't recommend channel'' buttons. These buttons are purported to allow the user to correct mistakes'' made by the recommendation system. Yet, relatively little is known about the empirical efficacy of these buttons. Neither is much known about users' awareness of and confidence in them. To address these gaps, we simulated YouTube users with sock puppet agents. Each agent first executed a stain phase'', where it watched many videos of one assigned topic; then it executed a scrub phase'', where it tried to remove recommendations of the assigned topic. Each agent repeatedly applied a single scrubbing strategy, which included disliking previously-watched videos or deleting them from watch history, as well as clicking the not interested'' or don\'t recommend channel'' button on newly-recommended videos. Overall, we found that the stain phase significantly increased the fraction of the recommended videos on the user\'s homepage dedicated to the assigned topic. For the scrub phase, using the Not interested'' button worked best, significantly reducing such recommendations in all topics tested, on average removing 88% of them. Neither the stain phase nor the scrub phase, however, had much effect on videopage recommendations (those given to users while they watch a video). We also ran a survey ( |
| 2023-07-25 | Insights into Cognitive Engagement: Comparing the Effectiveness of Game-Based and Video-Based Learning | Shayla Sharmin et.al. | 2307.13637v1 | null | The analysis of brain signals holds considerable importance in enhancing our comprehension of diverse learning techniques and cognitive mechanisms. Game-based learning is increasingly being recognized for its interactive and engaging educational approach. A pilot study of twelve participants divided into experimental and control groups was conducted to understand its effects on cognitive processes. Both groups were provided with the same contents regarding the basic structure of the graph. The participants in the experimental group engaged in a quiz-based game, while those in the control group watched a pre-recorded video. Functional Near-Infrared Spectroscopy (fNIRS) was employed to acquire cerebral signals, and a series of pre and post-tests were administered. The findings of our study indicate that the group engaged in the game activity displayed elevated levels of oxygenated hemoglobin compared to the group involved in watching videos. Conversely, the deoxygenated hemoglobin levels remained relatively consistent across both groups throughout the learning process. The aforementioned findings suggest that the use of game-based learning has a substantial influence on cognitive processes. Furthermore, it is evident that both the game and video groups exhibited higher neural activity in the Lateral Prefrontal cortex (PFC). The oxygenated hemoglobin ratio demonstrates that the game group had 2.33 times more neural processing in the Lateral PFC than the video group. This data is further supported by the knowledge gain analysis, which indicates that the game-based approach resulted in a 47.74% higher knowledge gain than the video group, as calculated from the difference in pre-and post-test scores. |
| 2023-07-25 | A Pairwise Dataset for GUI Conversion and Retrieval between Android Phones and Tablets | Han Hu et.al. | 2307.13225v1 | null | With the popularity of smartphones and tablets, users have become accustomed to using different devices for different tasks, such as using their phones to play games and tablets to watch movies. To conquer the market, one app is often available on both smartphones and tablets. However, although one app has similar graphic user interfaces (GUIs) and functionalities on phone and tablet, current app developers typically start from scratch when developing a tablet-compatible version of their app, which drives up development costs and wastes existing design resources. Researchers are attempting to employ deep learning in automated GUIs development to enhance developers' productivity. Deep learning models rely heavily on high-quality datasets. There are currently several publicly accessible GUI page datasets for phones, but none for pairwise GUIs between phones and tablets. This poses a significant barrier to the employment of deep learning in automated GUI development. In this paper, we collect and make public the Papt dataset, which is a pairwise dataset for GUI conversion and retrieval between Android phones and tablets. The dataset contains 10,035 phone-tablet GUI page pairs from 5,593 phone-tablet app pairs. We illustrate the approaches of collecting pairwise data and statistical analysis of this dataset. We also illustrate the advantages of our dataset compared to other current datasets. Through preliminary experiments on this dataset, we analyse the present challenges of utilising deep learning in automated GUI development and find that our dataset can assist the application of some deep learning models to tasks involving automatic GUI development. |
| 2023-07-24 | A Connection between One-Step Regularization and Critic Regularization in Reinforcement Learning | Benjamin Eysenbach et.al. | 2307.12968v1 | link | As with any machine learning problem with limited data, effective offline RL algorithms require careful regularization to avoid overfitting. One-step methods perform regularization by doing just a single step of policy improvement, while critic regularization methods do many steps of policy improvement with a regularized objective. These methods appear distinct. One-step methods, such as advantage-weighted regression and conditional behavioral cloning, truncate policy iteration after just one step. This ``early stopping'' makes one-step RL simple and stable, but can limit its asymptotic performance. Critic regularization typically requires more compute but has appealing lower-bound guarantees. In this paper, we draw a close connection between these methods: applying a multi-step critic regularization method with a regularization coefficient of 1 yields the same policy as one-step RL. While practical implementations violate our assumptions and critic regularization is typically applied with smaller regularization coefficients, our experiments nevertheless show that our analysis makes accurate, testable predictions about practical offline RL methods (CQL and one-step RL) with commonly-used hyperparameters. Our results that every problem can be solved with a single step of policy improvement, but rather that one-step RL might be competitive with critic regularization on RL problems that demand strong regularization. |
| 2023-07-24 | Rechargeable Li/Cl$_2$ battery down to -80 °C | Peng Liang et.al. | 2307.12947v1 | null | Low temperature rechargeable batteries are important to life in cold climates, polar/deep-sea expeditions and space explorations. Here, we report ~ 3.5 - 4 V rechargeable lithium/chlorine (Li/Cl2) batteries operating down to -80 {\deg}C, employing Li metal negative electrode, a novel CO2 activated porous carbon (KJCO2) as the positive electrode, and a high ionic conductivity (~ 5 to 20 mS cm-1 from -80 {\deg}C to 25 {\deg}C) electrolyte comprised of 1 M aluminum chloride (AlCl3), 0.95 M lithium chloride (LiCl), and 0.05 M lithium bis(fluorosulfonyl)imide (LiFSI) in low melting point (-104.5 {\deg}C) thionyl chloride (SOCl2). Between room-temperature and -80 {\deg}C, the Li/Cl2 battery delivered up to ~ 30,000 - 4,500 mAh g-1 first discharge capacity and a 1,200 - 5,000 mAh g-1 reversible capacity (discharge voltages in ~ 3.5 to 3.1 V) over up to 130 charge-discharge cycles. Mass spectrometry and X-ray photoelectron spectroscopy (XPS) probed Cl2 trapped in the porous carbon upon LiCl electro-oxidation during charging. At lower temperature down to -80 {\deg}C, SCl2/S2Cl2 and Cl2 generated by electro-oxidation in the charging step were trapped in porous KJCO2 carbon, allowing for reversible reduction to afford a high discharge voltage plateau near ~ 4 V with up to ~ 1000 mAh g-1 capacity for SCl2/S2Cl2 reduction and up to ~ 4000 mAh g-1 capacity at ~ 3.1 V plateau for Cl2 reduction. Towards practical use, we made CR2032 Li/Cl2 battery cells to drive digital watches at -40 {\deg}C and light emitting diode at -80 {\deg}C, opening Li/Cl2 secondary batteries for ultra-cold conditions. |
| 2023-07-24 | Less is More: Focus Attention for Efficient DETR | Dehua Zheng et.al. | 2307.12612v1 | link | DETR-like models have significantly boosted the performance of detectors and even outperformed classical convolutional models. However, all tokens are treated equally without discrimination brings a redundant computational burden in the traditional encoder structure. The recent sparsification strategies exploit a subset of informative tokens to reduce attention complexity maintaining performance through the sparse encoder. But these methods tend to rely on unreliable model statistics. Moreover, simply reducing the token population hinders the detection performance to a large extent, limiting the application of these sparse models. We propose Focus-DETR, which focuses attention on more informative tokens for a better trade-off between computation efficiency and model accuracy. Specifically, we reconstruct the encoder with dual attention, which includes a token scoring mechanism that considers both localization and category semantic information of the objects from multi-scale feature maps. We efficiently abandon the background queries and enhance the semantic interaction of the fine-grained object queries based on the scores. Compared with the state-of-the-art sparse DETR-like detectors under the same setting, our Focus-DETR gets comparable complexity while achieving 50.4AP (+2.2) on COCO. The code is available at https://github.com/huawei-noah/noah-research/tree/master/Focus-DETR and https://gitee.com/mindspore/models/tree/master/research/cv/Focus-DETR. |
| 2023-07-24 | Multi-Shooting Differential Dynamic Programming for Hybrid Systems using Analytical Derivatives | Shubham Singh et.al. | 2307.12606v1 | null | Differential Dynamic Programming (DDP) is a popular technique used to generate motion for dynamic-legged robots in the recent past. However, in most cases, only the first-order partial derivatives of the underlying dynamics are used, resulting in the iLQR approach. Neglecting the second-order terms often slows down the convergence rate compared to full DDP. Multi-Shooting is another popular technique to improve robustness, especially if the dynamics are highly non-linear. In this work, we consider Multi-Shooting DDP for trajectory optimization of a bounding gait for a simplified quadruped model. As the main contribution, we develop Second-Order analytical partial derivatives of the rigid-body contact dynamics, extending our previous results for fixed/floating base models with multi-DoF joints. Finally, we show the benefits of a novel Quasi-Newton method for approximating second-order derivatives of the dynamics, leading to order-of-magnitude speedups in the convergence compared to the full DDP method. |
| 2023-07-24 | Automated Mapping of Adaptive App GUIs from Phones to TVs | Han Hu et.al. | 2307.12522v1 | null | With the increasing interconnection of smart devices, users often desire to adopt the same app on quite different devices for identical tasks, such as watching the same movies on both their smartphones and TV. However, the significant differences in screen size, aspect ratio, and interaction styles make it challenging to adapt Graphical User Interfaces (GUIs) across these devices. Although there are millions of apps available on Google Play, only a few thousand are designed to support smart TV displays. Existing techniques to map a mobile app GUI to a TV either adopt a responsive design, which struggles to bridge the substantial gap between phone and TV or use mirror apps for improved video display, which requires hardware support and extra engineering efforts. Instead of developing another app for supporting TVs, we propose a semi-automated approach to generate corresponding adaptive TV GUIs, given the phone GUIs as the input. Based on our empirical study of GUI pairs for TV and phone in existing apps, we synthesize a list of rules for grouping and classifying phone GUIs, converting them to TV GUIs, and generating dynamic TV layouts and source code for the TV display. Our tool is not only beneficial to developers but also to GUI designers, who can further customize the generated GUIs for their TV app development. An evaluation and user study demonstrate the accuracy of our generated GUIs and the usefulness of our tool. |
| 2023-07-23 | LiveRetro: Visual Analytics for Strategic Retrospect in Livestream E-Commerce | Yuchen Wu et.al. | 2307.12213v1 | null | Livestream e-commerce integrates live streaming and online shopping, allowing viewers to make purchases while watching. However, effective marketing strategies remain a challenge due to limited empirical research and subjective biases from the absence of quantitative data. Current tools fail to capture the interdependence between live performances and feedback. This study identified computational features, formulated design requirements, and developed LiveRetro, an interactive visual analytics system. It enables comprehensive retrospective analysis of livestream e-commerce for streamers, viewers, and merchandise. LiveRetro employs enhanced visualization and time-series forecasting models to align performance features and feedback, identifying influences at channel, merchandise, feature, and segment levels. Through case studies and expert interviews, the system provides deep insights into the relationship between live performance and streaming statistics, enabling efficient strategic analysis from multiple perspectives. |
| 2023-07-21 | Large Language Model-based System to Provide Immediate Feedback to Students in Flipped Classroom Preparation Learning | Shintaro Uchiyama et.al. | 2307.11388v1 | null | This paper proposes a system that uses large language models to provide immediate feedback to students in flipped classroom preparation learning. This study aimed to solve challenges in the flipped classroom model, such as ensuring that students are emotionally engaged and motivated to learn. Students often have questions about the content of lecture videos in the preparation of flipped classrooms, but it is difficult for teachers to answer them immediately. The proposed system was developed using the ChatGPT API on a video-watching support system for preparation learning that is being used in real practice. Answers from ChatGPT often do not align with the context of the student's question. Therefore, this paper also proposes a method to align the answer with the context. This paper also proposes a method to collect the teacher's answers to the students' questions and use them as additional guides for the students. This paper discusses the design and implementation of the proposed system. |
| 2023-07-21 | OpenGDA: Graph Domain Adaptation Benchmark for Cross-network Learning | Boshen Shi et.al. | 2307.11341v1 | link | Graph domain adaptation models are widely adopted in cross-network learning tasks, with the aim of transferring labeling or structural knowledge. Currently, there mainly exist two limitations in evaluating graph domain adaptation models. On one side, they are primarily tested for the specific cross-network node classification task, leaving tasks at edge-level and graph-level largely under-explored. Moreover, they are primarily tested in limited scenarios, such as social networks or citation networks, lacking validation of model's capability in richer scenarios. As comprehensively assessing models could enhance model practicality in real-world applications, we propose a benchmark, known as OpenGDA. It provides abundant pre-processed and unified datasets for different types of tasks (node, edge, graph). They originate from diverse scenarios, covering web information systems, urban systems and natural systems. Furthermore, it integrates state-of-the-art models with standardized and end-to-end pipelines. Overall, OpenGDA provides a user-friendly, scalable and reproducible benchmark for evaluating graph domain adaptation models. The benchmark experiments highlight the challenges of applying GDA models to real-world applications with consistent good performance, and potentially provide insights to future research. As an emerging project, OpenGDA will be regularly updated with new datasets and models. It could be accessed from https://github.com/Skyorca/OpenGDA. |
| 2023-07-21 | Fused Spectatorship: Designing Bodily Experiences Where Spectators Become Players | Rakesh Patibanda et.al. | 2307.11297v1 | null | Spectating digital games can be exciting. However, due to its vicarious nature, spectators often wish to engage in the gameplay beyond just watching and cheering. To blur the boundaries between spectators and players, we propose a novel approach called ''Fused Spectatorship'', where spectators watch their hands play games by loaning bodily control to a computational Electrical Muscle Stimulation (EMS) system. To showcase this concept, we designed three games where spectators loan control over both their hands to the EMS system and watch them play these competitive and collaborative games. A study with 12 participants suggested that participants could not distinguish if they were watching their hands play, or if they were playing the games themselves. We used our results to articulate four spectator experience themes and four fused spectator types, the behaviours they elicited and offer one design consideration to support each of these behaviours. We also discuss the ethical design considerations of our approach to help game designers create future fused spectatorship experiences. |
| 2023-07-20 | Underwater 3D positioning on smart devices | Tuochao Chen et.al. | 2307.11263v1 | null | The emergence of water-proof mobile and wearable devices (e.g., Garmin Descent and Apple Watch Ultra) designed for underwater activities like professional scuba diving, opens up opportunities for underwater networking and localization capabilities on these devices. Here, we present the first underwater acoustic positioning system for smart devices. Unlike conventional systems that use floating buoys as anchors at known locations, we design a system where a dive leader can compute the relative positions of all other divers, without any external infrastructure. Our intuition is that in a well-connected network of devices, if we compute the pairwise distances, we can determine the shape of the network topology. By incorporating orientation information about a single diver who is in the visual range of the leader device, we can then estimate the positions of all the remaining divers, even if they are not within sight. We address various practical problems including detecting erroneous distance estimates, addressing rotational and flipping ambiguities as well as designing a distributed timestamp protocol that scales linearly with the number of devices. Our evaluations show that our distributed system running on underwater deployments of 4-5 commodity smart devices can perform pairwise ranging and localization with median errors of 0.5-0.9 m and 0.9-1.6 m |
| 2023-07-20 | Kick Back & Relax: Learning to Reconstruct the World by Watching SlowTV | Jaime Spencer et.al. | 2307.10713v1 | link | Self-supervised monocular depth estimation (SS-MDE) has the potential to scale to vast quantities of data. Unfortunately, existing approaches limit themselves to the automotive domain, resulting in models incapable of generalizing to complex environments such as natural or indoor settings. To address this, we propose a large-scale SlowTV dataset curated from YouTube, containing an order of magnitude more data than existing automotive datasets. SlowTV contains 1.7M images from a rich diversity of environments, such as worldwide seasonal hiking, scenic driving and scuba diving. Using this dataset, we train an SS-MDE model that provides zero-shot generalization to a large collection of indoor/outdoor datasets. The resulting model outperforms all existing SSL approaches and closes the gap on supervised SoTA, despite using a more efficient architecture. We additionally introduce a collection of best-practices to further maximize performance and zero-shot generalization. This includes 1) aspect ratio augmentation, 2) camera intrinsic estimation, 3) support frame randomization and 4) flexible motion estimation. Code is available at https://github.com/jspenmar/slowtv_monodepth. |
| 2023-07-19 | Watch out Venomous Snake Species: A Solution to SnakeCLEF2023 | Feiran Hu et.al. | 2307.09748v1 | link | The SnakeCLEF2023 competition aims to the development of advanced algorithms for snake species identification through the analysis of images and accompanying metadata. This paper presents a method leveraging utilization of both images and metadata. Modern CNN models and strong data augmentation are utilized to learn better representation of images. To relieve the challenge of long-tailed distribution, seesaw loss is utilized in our method. We also design a light model to calculate prior probabilities using metadata features extracted from CLIP in post processing stage. Besides, we attach more importance to venomous species by assigning venomous species labels to some examples that model is uncertain about. Our method achieves 91.31% score of the final metric combined of F1 and other metrics on private leaderboard, which is the 1st place among the participators. The code is available at https://github.com/xiaoxsparraw/CLEF2023. |
| 2023-07-18 | GroupLane: End-to-End 3D Lane Detection with Channel-wise Grouping | Zhuoling Li et.al. | 2307.09472v1 | null | Efficiency is quite important for 3D lane detection due to practical deployment demand. In this work, we propose a simple, fast, and end-to-end detector that still maintains high detection precision. Specifically, we devise a set of fully convolutional heads based on row-wise classification. In contrast to previous counterparts, ours supports recognizing both vertical and horizontal lanes. Besides, our method is the first one to perform row-wise classification in bird-eye-view. In the heads, we split feature into multiple groups and every group of feature corresponds to a lane instance. During training, the predictions are associated with lane labels using the proposed single-win one-to-one matching to compute loss, and no post-processing operation is demanded for inference. In this way, our proposed fully convolutional detector, GroupLane, realizes end-to-end detection like DETR. Evaluated on 3 real world 3D lane benchmarks, OpenLane, Once-3DLanes, and OpenLane-Huawei, GroupLane adopting ConvNext-Base as the backbone outperforms the published state-of-the-art PersFormer by 13.6% F1 score in the OpenLane validation set. Besides, GroupLane with ResNet18 still surpasses PersFormer by 4.9% F1 score, while the inference speed is nearly 7x faster and the FLOPs is only 13.3% of it. |
| 2023-07-17 | Multi-Task Cross-Modality Attention-Fusion for 2D Object Detection | Huawei Sun et.al. | 2307.08339v1 | null | Accurate and robust object detection is critical for autonomous driving. Image-based detectors face difficulties caused by low visibility in adverse weather conditions. Thus, radar-camera fusion is of particular interest but presents challenges in optimally fusing heterogeneous data sources. To approach this issue, we propose two new radar preprocessing techniques to better align radar and camera data. In addition, we introduce a Multi-Task Cross-Modality Attention-Fusion Network (MCAF-Net) for object detection, which includes two new fusion blocks. These allow for exploiting information from the feature maps more comprehensively. The proposed algorithm jointly detects objects and segments free space, which guides the model to focus on the more relevant part of the scene, namely, the occupied space. Our approach outperforms current state-of-the-art radar-camera fusion-based object detectors in the nuScenes dataset and achieves more robust results in adverse weather conditions and nighttime scenarios. |
| 2023-07-13 | Probing the Galactic Halo with RR Lyrae Stars -- V. Chemistry, Kinematics, and Dynamically Tagged Groups | Jonathan Cabrera Garcia et.al. | 2307.09572v1 | null | We employ a sample of 135,873 RR Lyrae stars (RRLs) with precise photometric-metallicity and distance estimates from the newly calibrated |
| 2023-07-13 | Watch Your Pose: Unsupervised Domain Adaption with Pose based Triplet Selection for Gait Recognition | Gavriel Habib et.al. | 2307.06751v1 | null | Gait Recognition is a computer vision task aiming to identify people by their walking patterns. Existing methods show impressive results on individual datasets but lack the ability to generalize to unseen scenarios. Unsupervised Domain Adaptation (UDA) tries to adapt a model, pre-trained in a supervised manner on a source domain, to an unlabelled target domain. UDA for Gait Recognition is still in its infancy and existing works proposed solutions to limited scenarios. In this paper, we reveal a fundamental phenomenon in adaptation of gait recognition models, in which the target domain is biased to pose-based features rather than identity features, causing a significant performance drop in the identification task. We suggest Gait Orientation-based method for Unsupervised Domain Adaptation (GOUDA) to reduce this bias. To this end, we present a novel Triplet Selection algorithm with a curriculum learning framework, aiming to adapt the embedding space by pushing away samples of similar poses and bringing closer samples of different poses. We provide extensive experiments on four widely-used gait datasets, CASIA-B, OU-MVLP, GREW, and Gait3D, and on three backbones, GaitSet, GaitPart, and GaitGL, showing the superiority of our proposed method over prior works. |
| 2023-07-11 | Efficient 3D Articulated Human Generation with Layered Surface Volumes | Yinghao Xu et.al. | 2307.05462v1 | null | Access to high-quality and diverse 3D articulated digital human assets is crucial in various applications, ranging from virtual reality to social platforms. Generative approaches, such as 3D generative adversarial networks (GANs), are rapidly replacing laborious manual content creation tools. However, existing 3D GAN frameworks typically rely on scene representations that leverage either template meshes, which are fast but offer limited quality, or volumes, which offer high capacity but are slow to render, thereby limiting the 3D fidelity in GAN settings. In this work, we introduce layered surface volumes (LSVs) as a new 3D object representation for articulated digital humans. LSVs represent a human body using multiple textured mesh layers around a conventional template. These layers are rendered using alpha compositing with fast differentiable rasterization, and they can be interpreted as a volumetric representation that allocates its capacity to a manifold of finite thickness around the template. Unlike conventional single-layer templates that struggle with representing fine off-surface details like hair or accessories, our surface volumes naturally capture such details. LSVs can be articulated, and they exhibit exceptional efficiency in GAN settings, where a 2D generator learns to synthesize the RGBA textures for the individual layers. Trained on unstructured, single-view 2D image datasets, our LSV-GAN generates high-quality and view-consistent 3D articulated digital humans without the need for view-inconsistent 2D upsampling networks. |
| 2023-07-10 | Active Learning for Video Classification with Frame Level Queries | Debanjan Goswami et.al. | 2307.05587v1 | null | Deep learning algorithms have pushed the boundaries of computer vision research and have depicted commendable performance in a variety of applications. However, training a robust deep neural network necessitates a large amount of labeled training data, acquiring which involves significant time and human effort. This problem is even more serious for an application like video classification, where a human annotator has to watch an entire video end-to-end to furnish a label. Active learning algorithms automatically identify the most informative samples from large amounts of unlabeled data; this tremendously reduces the human annotation effort in inducing a machine learning model, as only the few samples that are identified by the algorithm, need to be labeled manually. In this paper, we propose a novel active learning framework for video classification, with the goal of further reducing the labeling onus on the human annotators. Our framework identifies a batch of exemplar videos, together with a set of informative frames for each video; the human annotator needs to merely review the frames and provide a label for each video. This involves much less manual work than watching the complete video to come up with a label. We formulate a criterion based on uncertainty and diversity to identify the informative videos and exploit representative sampling techniques to extract a set of exemplar frames from each video. To the best of our knowledge, this is the first research effort to develop an active learning framework for video classification, where the annotators need to inspect only a few frames to produce a label, rather than watching the end-to-end video. |
| 2023-07-07 | A Self-Supervised Algorithm for Denoising Photoplethysmography Signals for Heart Rate Estimation from Wearables | Pranay Jain et.al. | 2307.05339v1 | null | Smart watches and other wearable devices are equipped with photoplethysmography (PPG) sensors for monitoring heart rate and other aspects of cardiovascular health. However, PPG signals collected from such devices are susceptible to corruption from noise and motion artifacts, which cause errors in heart rate estimation. Typical denoising approaches filter or reconstruct the signal in ways that eliminate much of the morphological information, even from the clean parts of the signal that would be useful to preserve. In this work, we develop an algorithm for denoising PPG signals that reconstructs the corrupted parts of the signal, while preserving the clean parts of the PPG signal. Our novel framework relies on self-supervised training, where we leverage a large database of clean PPG signals to train a denoising autoencoder. As we show, our reconstructed signals provide better estimates of heart rate from PPG signals than the leading heart rate estimation methods. Further experiments show significant improvement in Heart Rate Variability (HRV) estimation from PPG signals using our algorithm. We conclude that our algorithm denoises PPG signals in a way that can improve downstream analysis of many different health metrics from wearable devices. |
| 2023-07-07 | What makes a successful rebuttal in computer science conferences? : A perspective on social interaction | Junjie Huang et.al. | 2307.03371v2 | null | With an exponential increase in submissions to top-tier Computer Science (CS) conferences, more and more conferences have introduced a rebuttal stage to the conference peer review process. The rebuttal stage can be modeled as social interactions between authors and reviewers. A successful rebuttal often results in an increased review score after the rebuttal stage. In this paper, we conduct an empirical study to determine the factors contributing to a successful rebuttal using over 3,000 papers and 13,000 reviews from ICLR2022, one of the most prestigious computer science conferences. First, we observe a significant difference in review scores before and after the rebuttal stage, which is crucial for paper acceptance. Furthermore, we investigate factors from the reviewer's perspective using signed social network analysis. A notable finding is the increase in balanced network structure after the rebuttal stage. Subsequently, we evaluate several quantifiable author rebuttal strategies and their effects on review scores. These strategies can help authors in improving their review scores. Finally, we used machine learning models to predict rebuttal success and validated the impact of potential factors analyzed in this paper. Our experiments demonstrate that the utilization of all features proposed in this study can aid in predicting the success of the rebuttal. In summary, this work presents a study on the impact factors of successful rebuttals from both reviewers' and authors' perspectives and lays the foundation for analyzing rebuttals with social network analysis. |
| 2023-07-06 | Machine Learning Classification of Repeating FRBs from FRB121102 | Bjorn Jasper R. Raquel et.al. | 2307.02811v2 | null | Fast Radio Bursts (FRBs) are mysterious bursts in the millisecond timescale at radio wavelengths. Currently, there is little understanding about the classification of repeating FRBs, based on difference in physics, which is of great importance in understanding their origin. Recent works from the literature focus on using specific parameters to classify FRBs to draw inferences on the possible physical mechanisms or properties of these FRB subtypes. In this study, we use publicly available 1652 repeating FRBs from FRB121102 detected with the Five-hundred-meter Aperture Spherical Telescope (FAST), and studied them with an unsupervised machine learning model. By fine-tuning the hyperparameters of the model, we found that there is an indication for four clusters from the bursts of FRB121102 instead of the two clusters ("Classical" and "Atypical") suggested in the literature. Wherein, the "Atypical" cluster can be further classified into three sub-clusters with distinct characteristics. Our findings show that the clustering result we obtained is more comprehensive not only because our study produced results which are consistent with those in the literature but also because our work uses more physical parameters to create these clusters. Overall, our methods and analyses produced a more holistic approach in clustering the repeating FRBs of FRB121102. |
| 2023-07-03 | MWPRanker: An Expression Similarity Based Math Word Problem Retriever | Mayank Goel et.al. | 2307.01240v1 | null | Math Word Problems (MWPs) in online assessments help test the ability of the learner to make critical inferences by interpreting the linguistic information in them. To test the mathematical reasoning capabilities of the learners, sometimes the problem is rephrased or the thematic setting of the original MWP is changed. Since manual identification of MWPs with similar problem models is cumbersome, we propose a tool in this work for MWP retrieval. We propose a hybrid approach to retrieve similar MWPs with the same problem model. In our work, the problem model refers to the sequence of operations to be performed to arrive at the solution. We demonstrate that our tool is useful for the mentioned tasks and better than semantic similarity-based approaches, which fail to capture the arithmetic and logical sequence of the MWPs. A demo of the tool can be found at https://www.youtube.com/watch?v=gSQWP3chFIs |
| 2023-06-30 | Collapse of Straight Soft Growing Inflated Beam Robots Under Their Own Weight | Ciera McFarland et.al. | 2307.00089v1 | null | Soft, growing inflated beam robots, also known as everting vine robots, have previously been shown to navigate confined spaces with ease. Less is known about their ability to navigate three-dimensional open spaces where they have the potential to collapse under their own weight as they attempt to move through a space. Previous work has studied collapse of inflated beams and vine robots due to purely transverse or purely axial external loads. Here, we extend previous models to predict the length at which straight vine robots will collapse under their own weight at arbitrary launch angle relative to gravity, inflated diameter, and internal pressure. Our model successfully predicts the general trends of collapse behavior of straight vine robots. We find that collapse length increases non-linearly with the robot's launch angle magnitude, linearly with the robot's diameter, and with the square root of the robot's internal pressure. We also demonstrate the use of our model to determine the robot parameters required to grow a vine robot across a gap in the floor. This work forms the foundation of an approach for modeling the collapse of vine robots and inflated beams in arbitrary shapes. |
| 2023-06-30 | INDCOR White Paper 0: Interactive Digital Narratives (IDNs) -- A Solution to the Challenge of Representing Complex Issues | Hartmut Koenitz et.al. | 2306.17498v1 | null | Citizens everywhere have the right to be well-informed. Yet, with the high complexity of many contemporary issues, such as global warming and migration, our means of information need to mutually adapt. Narrative has always been at the core of information exchange - regardless of whether our ancestors sat around a fire and exchanged stories, or whether we read an article in a newspaper, or watched a TV news broadcast. Yet, the narrative formats of the newspaper article, the news broadcast, the documentary, and the textbook are severely limited when it comes to representing highly complex topics which may include several competing - and sometimes equally valid - perspectives. Such complexity contributes to a high level of uncertainty due to a multitude of factors affecting an outcome. Fortunately, with Interactive Digital Narrative (IDN), there is a novel media format which can address these challenges. IDNs can present several different perspectives in the same work, and give audiences the ability to explore them at will through decision-making. After experiencing the consequences of their decisions, the audience can replay to revisit and change these decisions in order to consider their alternatives. IDN works enable deep personalization and the inclusion of live data. These capabilities make IDN a 21st century democratic medium, empowering citizens through the understanding of complex issues. In this white paper, we discuss the challenge of representing complexity, describe the advantages offered by IDNs, and point out opportunities and strategies for deployment. |
| 2023-06-30 | 24 New Light Curves and Updated Ephemeris using EXOTIC for WASP-12b | Avinash S. Nediyedath et.al. | 2306.17473v2 | null | NASA citizen scientists from all over the world have used EXOplanet Transit Interpretation Code (EXOTIC) to reduce 71 sets of time-series images of WASP-12 taken by the 6-inch telescope operated by the Centre of Astrophysics |
| 2023-06-30 | Leveraging Watch-time Feedback for Short-Video Recommendations: A Causal Labeling Framework | Yang Zhang et.al. | 2306.17426v1 | null | With the proliferation of short video applications, the significance of short video recommendations has vastly increased. Unlike other recommendation scenarios, short video recommendation systems heavily rely on feedback from watch time. Existing approaches simply treat watch time as a direct label, failing to effectively harness its extensive semantics and introduce bias, thereby limiting the potential for modeling user interests based on watch time. To overcome this challenge, we propose a framework named Debiasied Multiple-semantics-extracting Labeling (DML). DML constructs labels that encompass various semantics by utilizing quantiles derived from the distribution of watch time, prioritizing relative order rather than absolute label values. This approach facilitates easier model learning while aligning with the ranking objective of recommendations. Furthermore, we introduce a method inspired by causal adjustment to refine label definitions, thereby reducing the impact of bias on the label and directly mitigating bias at the label level. We substantiate the effectiveness of our DML framework through both online and offline experiments. Extensive results demonstrate that our DML could effectively leverage watch time to discover users' real interests, enhancing their engagement in our application. |
| 2023-06-29 | 13 New Light Curves and Updated Mid-Transit Time and Period for Hot Jupiter WASP-104 b with EXOTIC | Heather B. Hewitt et.al. | 2306.17251v1 | null | Using the EXOplanet Transit Interpretation Code (EXOTIC), we reduced 52 sets of images of WASP-104 b, a Hot Jupiter-class exoplanet orbiting WASP-104, in order to obtain an updated mid-transit time (ephemeris) and orbital period for the planet. We performed this reduction on images taken with a 6-inch telescope of the Center for Astrophysics |
| Publish Date | Title | Authors | Code | Abstract | |
|---|---|---|---|---|---|
| 2023-07-27 | Unpinned Dirac-Fermions in Carbon-Phosphorous-Arsenic Based Ternary Monolayer | Amrendra Kumar et.al. | 2307.15001v1 | null | We predict energetically and dynamically stable ternary Carbon-Phosphorous-Arsenic (CPAs2) monolayers in buckled geometric structure by employing density functional theory based calculations. We consider three different symmetric configurations, namely, inversion (i), mirror (m) and rotational (r). The low-energy dispersions in electronic band structure and density of states (DOS) around the Fermi level contain two contrasting features: (a) parabolic dispersion around highly symmetric Gamma point with a step function in DOS due to nearly-free-particle-like Schroedinger-Fermions and (b) linear dispersion around highly symmetric K point with linear DOS due to massless Dirac-Fermions for i-CPAs2 monolayer. The step function in DOS is a consequence of two-dimensionality of the system in which the motion of nearly-free-particles is confined. However, a closer look at (b) reveals that the ternary monolayers possess distinct characters, namely (i) massless-gapless, (ii) slightly massive-gapped and (iii) unpinned massless-gapless Dirac-Fermions for i, m and r-CPAs2 configurations respectively. Thus, the nature of states around the Fermi level depends crucially on the symmetry of systems. In addition, we probe the influence of mechanical strain on the properties of CPAs2 monolayer. The results indicate that the characteristic dispersions of (a) and (b) move in opposite directions in energy which leads to a metal-to-semimetal transition in i and r-CPAs2 configurations, for a few percentages of tensile strain. On the other hand, a strain induced metal-to-semiconductor transition is observed in m-CPAs2 configuration with a tunable energy band gap. Interestingly, unlike graphene, the Dirac cones can be unpinned from highly symmetric K (and K') point, but they are restricted to move along the edges (K-M'-K') of first Brillouin zone due to C2 symmetry in i and r-CPAs2 configurations. |
| 2023-07-27 | Learning locally dominant force balances in active particle systems | Dominik Sturm et.al. | 2307.14970v1 | null | We use a combination of unsupervised clustering and sparsity-promoting inference algorithms to learn locally dominant force balances that explain macroscopic pattern formation in self-organized active particle systems. The self-organized emergence of macroscopic patterns from microscopic interactions between self-propelled particles can be widely observed nature. Although hydrodynamic theories help us better understand the physical basis of this phenomenon, identifying a sufficient set of local interactions that shape, regulate, and sustain self-organized structures in active particle systems remains challenging. We investigate a classic hydrodynamic model of self-propelled particles that produces a wide variety of patterns, like asters and moving density bands. Our data-driven analysis shows that propagating bands are formed by local alignment interactions driven by density gradients, while steady-state asters are shaped by a mechanism of splay-induced negative compressibility arising from strong particle interactions. Our method also reveals analogous physical principles of pattern formation in a system where the speed of the particle is influenced by local density. This demonstrates the ability of our method to reveal physical commonalities across models. The physical mechanisms inferred from the data are in excellent agreement with analytical scaling arguments and experimental observations. |
| 2023-07-27 | A full-resolution training framework for Sentinel-2 image fusion | Matteo Ciotola et.al. | 2307.14864v1 | null | This work presents a new unsupervised framework for training deep learning models for super-resolution of Sentinel-2 images by fusion of its 10-m and 20-m bands. The proposed scheme avoids the resolution downgrade process needed to generate training data in the supervised case. On the other hand, a proper loss that accounts for cycle-consistency between the network prediction and the input components to be fused is proposed. Despite its unsupervised nature, in our preliminary experiments the proposed scheme has shown promising results in comparison to the supervised approach. Besides, by construction of the proposed loss, the resulting trained network can be ascribed to the class of multi-resolution analysis methods. |
| 2023-07-27 | Modeling Interference for the Coexistence of 6G Networks and Passive Sensing Systems | Paolo Testolina et.al. | 2307.14848v1 | null | Future wireless networks and sensing systems will benefit from access to large chunks of spectrum above 100 GHz, to achieve terabit-per-second data rates in 6th Generation (6G) cellular systems and improve accuracy and reach of Earth exploration and sensing and radio astronomy applications. These are extremely sensitive to interference from artificial signals, thus the spectrum above 100~GHz features several bands which are protected from active transmissions under current spectrum regulations. To provide more agile access to the spectrum for both services, active and passive users will have to coexist without harming passive sensing operations. In this paper, we provide the first, fundamental analysis of Radio Frequency Interference (RFI) that large-scale terrestrial deployments introduce in different satellite sensing systems now orbiting the Earth. We develop a geometry-based analysis and extend it into a data-driven model which accounts for realistic propagation, building obstruction, ground reflection, for network topology with up to |
| 2023-07-27 | Eigenenergy braids in 2D photonic crystals | Janet Zhong et.al. | 2307.14845v1 | null | We consider non-Hermitian energy band theory in two-dimensional systems, and study eigenenergy braids on slices in the two-dimensional Brillouin zone. We show the consequences of reciprocity and geometric symmetry on such eigenenergy braids. The point-gap topology of the energy bands can be found from the projection of the eigenenergy braid onto the complex energy plane. We show that the conjugacy class transitions in the eigenenergy braid results in the changes in the number of bands in a complete point-gap loop. This transition occurs at exceptional points. We numerically demonstrate these concepts using two-dimensional reciprocal and nonreciprocal photonic crystals. |
| 2023-07-27 | Triaxial projected shell model approach for negative parity states in even-even nuclei | Nazira Nazir et.al. | 2307.14827v1 | null | The triaxial projected shell model (TPSM) approach is generalized to investigate the negative parity band structures in even-even systems. In the earlier version of the TPSM approach, the quasiparticle excitations were restricted to one major oscillator shell and it was possible to study only $+$ive parity states in even-even systems. In the present extension, the excited quasiparticles are allowed to occupy two major oscillator shells, which makes it possible to generate the $-$ive parity states. As a major application of this development, the extended approach is applied to elucidate the $-$ive parity high-spin band structures in $^{102-112}$Ru. It is shown that TPSM approach provides a reasonable description of the observed properties. |
| 2023-07-27 | Interfacial Resonance States-Induced Negative Tunneling Magneto-resistance in Orthogonally-Magnetized CoFeB/MgO/CoFeB | Puyang Huang et.al. | 2307.14807v1 | null | Magnetic tunneling junctions (MTJs) are essential for non-volatile magneto-resistive random access memory (MRAM) applications. Here, we report the observation of a large negative tunneling magneto-resistance (TMR) in the CoFeB/MgO/CoFeB system with an orthogonally-magnetized configuration. Through the thickness modulation of the MgO barrier, the negative TMR component can be enhanced up to 20% under a negative voltage bias. Moreover, the tunnel anisotropic magneto-resistance measurements unveil that the negative TMR component likely arises from the interfacial resonance states (IRS) in the minority band of the bottom ferromagnetic layer. Complementary first principle calculations further quantify the IRS location and strength with respect to the Fermi level position. Our work not only confirm the vital role of IRS in the electrical transport of MTJ, but also provide valuable insights for the design of new-generation voltage-controlled MRAM and related spintronic applications. |
| 2023-07-27 | Broadband parametric amplification for multiplexed SiMOS quantum dot signals | Victor Elhomsy et.al. | 2307.14717v1 | null | Spins in semiconductor quantum dots hold great promise as building blocks of quantum processors. Trapping them in SiMOS transistor-like devices eases future industrial scale fabrication. Among the potentially scalable readout solutions, gate-based dispersive radiofrequency reflectometry only requires the already existing transistor gates to readout a quantum dot state, relieving the need for additional elements. In this effort towards scalability, traveling-wave superconducting parametric amplifiers significantly enhance the readout signal-to-noise ratio (SNR) by reducing the noise below typical cryogenic low-noise amplifiers, while offering a broad amplification band, essential to multiplex the readout of multiple resonators. In this work, we demonstrate a 3GHz gate-based reflectometry readout of electron charge states trapped in quantum dots formed in SiMOS multi-gate devices, with SNR enhanced thanks to a Josephson traveling-wave parametric amplifier (JTWPA). The broad, tunable 2GHz amplification bandwidth combined with more than 10dB ON/OFF SNR improvement of the JTWPA enables frequency and time division multiplexed readout of interdot transitions, and noise performance near the quantum limit. In addition, owing to a design without superconducting loops and with a metallic ground plane, the JTWPA is flux insensitive and shows stable performances up to a magnetic field of 1.2T at the quantum dot device, compatible with standard SiMOS spin qubit experiments. |
| 2023-07-27 | Two dimensional lattice with an imaginary magnetic field | Tomoki Ozawa et.al. | 2307.14635v1 | null | We explore gauge-independent properties of two-dimensional non-Hermitian lattice systems with an imaginary magnetic field. We find that the energy spectrum under the open boundary conditions is an example of such gauge-independent properties. We discuss how to obtain the asymptotic continuum energy spectrum upon increasing length of one side using the framework of the non-Bloch band theory. We also find an analog of the Aharonov-Bohm effect; the net change of the norm of the wavefunction upon adiabatically forming a closed path is determined by the imaginary magnetic flux enclosed by the path. |
| 2023-07-27 | Demonstrating Quantum Computation for Quasiparticle Band Structures | Takahiro Ohgoe et.al. | 2307.14607v1 | null | Understanding and predicting the properties of solid-state materials from first-principles has been a great challenge for decades. Owing to the recent advances in quantum technologies, quantum computations offer a promising way to achieve this goal. Here, we demonstrate the first-principles calculation of a quasiparticle band structure on actual quantum computers. This is achieved by hybrid quantum-classical algorithms in conjunction with qubit-reduction and error-mitigation techniques. Our demonstration will pave the way to practical applications of quantum computers. |
| 2023-07-27 | White-light superflare and long-term activity of the nearby M7 type binary EI~Cnc observed with GWAC system | Hua-Li Li et.al. | 2307.14594v1 | null | Stellar white-light flares are believed to play an essential role on the physical and chemical properties of the atmosphere of the surrounding exoplanets. Here we report an optical monitoring campaign on the nearby flaring system EI |
| 2023-07-26 | Dust enrichment and grain growth in a smooth disk around the DG Tau protostar revealed by ALMA triple bands frequency observations | Satoshi Ohashi et.al. | 2307.14526v1 | null | Characterizing the physical properties of dust grains in a protoplanetary disk is critical to comprehending the planet formation process. Our study presents ALMA high-resolution observations of the young protoplanetary disk around DG Tau at a 1.3 mm dust continuum. The observations, with a spatial resolution of |
| 2023-07-26 | Competition between fractional quantum Hall liquid and electron solid phases in the Landau levels of multilayer graphene | Rakesh K. Dora et.al. | 2307.14519v1 | null | We study the competition between the electron liquid and solid phases, such as Wigner crystal and bubbles, in partially filled Landau levels (LLs) of multilayer graphene. Graphene systems offer a versatile platform for controlling band dispersion by varying the number of its stacked layers. The band dispersion determines the LL wave functions, and consequently, the LL-projected Coulomb interaction in graphene and its multilayers is different from that in conventional semiconductors like GaAs. As a result, the energies of the liquid and solid phases are different in the different LLs of multilayer graphene, leading to a new phase diagram for the stability of these phases, which we work out. The phase diagram of competing solid and liquid phases in the LLs of monolayer graphene has been studied previously. Here, we primarily consider |
| 2023-07-26 | CEERS MIRI Imaging: Data Reduction and Quality Assessment | Guang Yang et.al. | 2307.14509v1 | null | The Cosmic Evolution Early Release Science Survey (CEERS), targeting the Extended Groth Strip extragalactic field, is one of the JWST Director's Discretionary Early Release Science programs. To date, all observations have been executed and include NIRCam/MIRI imaging and NIRSpec/NIRCam spectroscopic exposures. Here, we discuss the MIRI imaging, which includes eight pointings, four of which provide deep imaging with the bluer bands (F560W, F770W) and four with contiguous wavelength coverage in F1000W, F1280W, F1500W, and F1800W, where two of these also include coverage in F770W and F2100W. We present a summary of the data, the data quality, and data reduction. The data reduction is based on the JWST Calibration Pipeline combined with custom modifications and additional steps designed to enhance the output quality, including improvements in astrometry and the removal of detector artifacts. We estimate the image depth of the reduced mosaics, and show that these generally agree with expectations from the Exposure Time Calculator. We compare the MIRI F560W and F770W flux densities for bright sources to measurements from Spitzer/IRAC Ch3 (5.8 $\mu$m) and Ch4 (8.0 $\mu$m), and we find that they agree with systematic differences of |
| 2023-07-26 | AutoSourceID-Classifier. Star-Galaxy Classification using a Convolutional Neural Network with Spatial Information | F. Stoppa et.al. | 2307.14456v1 | null | Aims. Traditional star-galaxy classification techniques often rely on feature estimation from catalogues, a process susceptible to introducing inaccuracies, thereby potentially jeopardizing the classification's reliability. Certain galaxies, especially those not manifesting as extended sources, can be misclassified when their shape parameters and flux solely drive the inference. We aim to create a robust and accurate classification network for identifying stars and galaxies directly from astronomical images. By leveraging convolutional neural networks (CNN) and additional information about the source position, we aim to accurately classify all stars and galaxies within a survey, particularly those with a signal-to-noise ratio (S/N) near the detection limit. Methods. The AutoSourceID-Classifier (ASID-C) algorithm developed here uses 32x32 pixel single filter band source cutouts generated by the previously developed ASID-L code. ASID-C utilizes CNNs to distinguish these cutouts into stars or galaxies, leveraging their strong feature-learning capabilities. Subsequently, we employ a modified Platt Scaling calibration for the output of the CNN. This technique ensures that the derived probabilities are effectively calibrated, delivering precise and reliable results. Results. We show that ASID-C, trained on MeerLICHT telescope images and using the Dark Energy Camera Legacy Survey (DECaLS) morphological classification, outperforms similar codes like SourceExtractor. ASID-C opens up new possibilities for accurate celestial object classification, especially for sources with a S/N near the detection limit. Potential applications of ASID-C, like real-time star-galaxy classification and transient's host identification, promise significant contributions to astronomical research. |
| 2023-07-26 | Tunable Magnon-Photon Coupling by Magnon Band Gap in a Layered Hybrid Perovskite Antiferromagnet | Yi Li et.al. | 2307.14447v1 | null | Tunability of coherent coupling between fundamental excitations is an important prerequisite for expanding their functionality in hybrid quantum systems. In hybrid magnonics, the dipolar interaction between magnon and photon usually persists and cannot be switched off. Here, we demonstrate this capability by coupling a superconducting resonator to a layered hybrid perovskite antiferromagnet, which exhibits a magnon band gap due to its intrinsic Dzyaloshinskii-Moriya interaction. The pronounced temperature sensitivity of the magnon band gap location allows us to set the photon mode within the gap and to disable magnon-photon hybridization. When the resonator mode falls into the magnon band gap, the resonator damping rate increases due to the nonzero coupling to the detuned magnon mode. This phenomena can be used to quantify the magnon band gap using an analytical model. Our work brings new opportunities in controlling coherent information processing with quantum properties in complex magnetic materials. |
| 2023-07-26 | JWST Photometry of Globular Cluster Populations in Abell 2744 at |
William E. Harris et.al. | 2307.14412v1 | null | JWST imaging of the rich galaxy cluster Abell 2744 at |
| 2023-07-26 | Non-Hermitian tearing by dissipation | Qian Du et.al. | 2307.14340v1 | null | In the paper, we study the non-Hermitian system under dissipation in which the energy band shows an imaginary line gap and energy eigenstates are bound to a specific region. To describe these phenomena, we propose the concept of "non-Hermitian tearing", in which the degree of tearing we defined reveals a continuous phase transition at the exceptional point. The non-Hermitian tearing manifests in two forms -- bulk state separation and boundary state decoupling. For a deeper understanding of non-Hermitian tearing, we give the effective 22 Hamiltonian in the k-space by reducing the NN Hamiltonian in the real space. In addition, we also explore the non-Hermitian tearing in the one-dimensional Su-Schrieffer-Heeger model and the Qi-Wu-Zhang model. Our results provide a theoretical approach for studying non-Hermitian tearing in more complex systems. |
| 2023-07-26 | Non-chiral one-dimensional sates propagating inside AB/BA domain walls in bilayer graphene | V. V. Enaldiev et.al. | 2307.14293v1 | null | Boundaries between structural twins of bilayer graphene (so-called AB/BA domain walls) are often discussed in terms of the formation of topologically protected valley-polarised chiral states. Here, we show that, depending on the width of the AB/BA boundary, the latter can also support non-chiral one-dimensional (1D) states that are confined to the domain wall at low energies and take the form of quasi-bound states at higher energies, where the 1D bands cross into the two-dimensional spectral continuum. We present the results of modeling of electronic properties of AB/BA domain walls with and without magnetic field as a function of their width and interlayer bias. |
| 2023-07-26 | Topological Insulators | Yoichi Ando et.al. | 2307.14196v1 | null | Topological insulators are characterized by insulating bulk and conducting surface, the latter is a necessity consequence of the nontrivial topology of the wavefunctions forming the valence band. This chapter gives a historical overview of the discovery of topological insulators and a concise description of the |
| 2023-07-26 | Non-Hermitian Chiral Edge Modes With Complex Fermi Velocity | Fei Yang et.al. | 2307.14144v1 | null | Recently, much attention has been paid to uncovering the influence of dissipation on a quantum system, particularly on how the non-Hermitian (NH) terms modify the band topology of topological materials and reshape the profile of the wavefunctions of a system (or the NH skin effect). In this paper, a specific NH skin effect that induced by local dissipation is studied for chiral edge modes, in which the NH term corresponds to the local imaginary Fermi velocity of the chiral edge modes. By solving the NH Schr"{o}dinger equation of the non-Hermitian chiral edge modes (nhCEs) with complex Fermi velocity, we uncovered the remarkable complex spectra and the wavefunctions of the nhCEs. We find that the complex spectra of these modes is a straight line in the topological materials, and its chirality can separates the modes with positive energy from those with negative energy, in which they are localized at different positions. We also studied the nhCEs at the boundary of 2-dimensional (2D) topological materials, the 2D |
| 2023-07-26 | Still alive and kicking: A significant outburst in changing-look AGN Mrk 1018 | R. Brogan et.al. | 2307.14139v1 | null | Changing-look active galactic nuclei (CL-AGN) have been observed to change optical spectral type. Mrk 1018 is unique: first classified as a type 1.9 Seyfert galaxy, it transitioned to a type 1 before returning to its initial classification after approximately 30 years. We present a high-cadence monitoring programme that caught a major outburst in 2020. Due to sunblock, only the decline could be observed. We studied X-ray, UV, optical, and IR before and after the outburst to investigate the responses of the AGN structures. We derived a u'-band light curve of the AGN contribution alone. The flux increased by a factor of the order of 13. We confirmed this in other optical bands and determined the shape and speed of the decline in each waveband. The shapes of H beta and H alpha were analysed before and after the event. Two XMM-Newton observations from before and after the outburst were also exploited. The outburst is asymmetric, with a swifter rise than decline. The decline is best fit by a linear function, ruling out a tidal disruption event. The optical spectrum shows no change approximately 8 months before and 17 months after. The UV flux increased slightly after the outburst but the X-ray primary flux is unchanged. However, the 6.4 keV Iron line has doubled in strength. IR data taken 13 days after the observed optical peak show an increased emission level. Calculating the distance of the broad-line region and inner edge of the torus from the supermassive black hole can explain the multi-wavelength response to the outburst, in particular: i) the unchanged H beta and H alpha lines, ii) the unchanged primary X-ray spectral components, iii) the rapid and extended infrared response, as well as iv) the enhanced emission of the reflected 6.4 keV line. The outburst was due to a dramatic and short-lasting change in the intrinsic accretion rate. We discuss different models as potential causes. |
| 2023-07-26 | Erbium emitters in commercially fabricated nanophotonic silicon waveguides | Stephan Rinner et.al. | 2307.14017v1 | null | Quantum memories integrated into nanophotonic silicon devices are a promising platform for large quantum networks and scalable photonic quantum computers. In this context, erbium dopants are particularly attractive, as they combine optical transitions in the telecommunications frequency band with the potential for second-long coherence time. Here we show that these emitters can be reliably integrated into commercially fabricated low-loss waveguides. We investigate several integration procedures and obtain ensembles of many emitters with an inhomogeneous broadening of < 2 GHz and a homogeneous linewidth of < 30 kHz. We further observe the splitting of the electronic spin states in a magnetic field up to 9 T that freezes paramagnetic impurities. Our findings are an important step towards long-lived quantum memories that can be fabricated on a wafer-scale using CMOS technology. |
| 2023-07-26 | Sub-second periodic radio oscillations in a microquasar | Pengfu Tian et.al. | 2307.14015v1 | null | Powerful relativistic jets are one of the ubiquitous features of accreting black holes in all scales. GRS 1915+105 is a well-known fast-spinning black-hole X-ray binary with a relativistic jet, termed as a ``microquasar'', as indicated by its superluminal motion of radio emission. It exhibits persistent x-ray activity over the last 30 years, with quasi-periodic oscillations of |
| 2023-07-26 | Normal state quantum geometry and superconducting domes in (111) oxide interfaces | Florian Simon et.al. | 2307.13993v1 | null | We theoretically investigate the influence of the normal state quantum geometry on the superconducting phase in (111) oriented oxide interfaces and discuss some of its implications in the case of the |
| 2023-07-26 | Inter-orbital Cooper pairing at finite energies in Rashba surface states | Philipp Rüßmann et.al. | 2307.13990v1 | null | Multi-band effects in hybrid structures provide a rich playground for unconventional superconductivity. We combine two complementary approaches based on density-functional theory (DFT) and effective low-energy model theory in order to investigate the proximity effect in a Rashba surface state in contact to an |
| 2023-07-26 | Towards a cosmic ray composition measurement with the IceAct telescopes at the IceCube Neutrino Observatory | Larissa Paul et.al. | 2307.13965v1 | null | The IceCube Neutrino Observatory is equipped with the unique possibility to measure cosmic ray induced air showers simultaneously by their particle footprint on the surface with the IceTop detector and by the high-energy muonic shower component at a depth of more than 1.5 km. Since 2019 additionally two Imaging Air Cherenkov Telescopes, called IceAct, measure the electromagnetic component of air showers in the atmosphere above the IceCube detector. This opens the possibility to measure air shower parameters in three independent detectors and allows to improve mass composition studies with the IceCube data. One IceAct camera consists of 61 SiPM pixels in a hexagonal grid. Each pixel has a field of view of 1.5 degree resulting in an approximately 12-degree field of view per camera. A single telescope tube has a diameter of 50 cm, is built robust enough to withstand the harsh Antarctic conditions, and is able to detect cosmic ray particles with energies above approximately 10 TeV. A Graph Neural Network (GNN) is trained to determine the air shower properties from IceAct data. The composition analysis is then performed using Random Forest Regression (RF). Since all three detectors have a different energy threshold, we train several RFs with different inputs, combining the different detectors and taking advantage of the lower energy threshold of the IceAct telescopes. This will result in composition measurements for different detector combinations and enables cross-checks of the results in overlapping energy bands. We present the method, parameters for data selection, and the status of this analysis. |
| 2023-07-26 | Detection of a strong ~2.5 Hz modulation in the Newly Discovered Millisecond Pulsar MAXI J1816-195 | P. P. Li et.al. | 2307.13955v1 | null | MAXI J181-195 is a newly discovered accreting millisecond X-ray pulsar that went outburst in June 2022. Through timing analysis with NICER and NuSTAR observations, we find a transient modulation at ~2.5 Hz during the decay period of MAXI J1816-195. The modulation is strongly correlated with a spectral hardening, and its fractional rms amplitude increases with energy. These results suggest that the modulation is likely to be produced in an unstable corona. In addition, the presence of the modulation during thermonuclear bursts indicates that it may originate from a disk-corona where the optical depth is likely the main factor affecting the modulation, rather than temperature. Moreover, we find significant reflection features in the spectra observed simultaneously by NICER and NuSTAR, including a relativistically broadened Fe-K line around 6-7 keV, and a Compton hump in the 10-30 keV energy band. The radius of the inner disc is constrained to be Rin = (1.04-1.23) RISCO based on reflection modeling of the broadband spectra. Assuming that the inner disc is truncated at the magnetosphere radius, we estimate that the magnetic field strength is < 4.67 * 10e8 G. |
| 2023-07-25 | Fast Fabrication of WS2/Bi2Se3 Heterostructures for High Performance Photodetection | Fan Li et.al. | 2307.13852v1 | null | Two-dimensional (2D) material heterostructures have attracted considerable attention owing to their interesting and novel physical properties, which expand the possibilities for future optoelectronic, photovoltaic, and nanoelectronic applications. A portable, fast, and deterministic transfer technique is highly needed for the fabrication of heterostructures. Herein, we report a fast half wet poly(dimethylsiloxane) (PDMS) transfer process utilizing the change of adhesion energy with the help of micron-sized water droplets. Using this method, a vertical stacking of the WS2/Bi2Se3 heterostructure with a straddling band configuration is successfully assembled on a fluorophlogopite substrate. Thanks to the complementary band gaps and high efficiency of interfacial charge transfer, the photodetector based on the heterostructure exhibits a superior responsivity of 109.9 A/W for a visible incident light at 473 nm and 26.7 A/W for a 1064 nm near-infrared illumination. Such high photoresponsivity of the heterostructure demonstrates that our transfer method not only owns time efficiency but also ensures high quality of the heterointerface. Our study may open new pathways to the fast and massive fabrication of various vertical 2D heterostructures for applications in twistronics/valleytronics and other band engineering devices. |
| 2023-07-25 | Magnetotransport and Berry phase Tuning in Gd-doped Bi2Se3 Topological Insulator Single Crystals | Lei Chen et.al. | 2307.13847v1 | null | The Berry phase is an important concept in solids, correlated to the band topology, axion electrodynamics and potential applications of topological materials. Here, we investigate the magnetotransport and Berry phase of rare earth element Gd doped Bi2Se3 (Gd_Bi2Se3) topological insulator at low temperatures and high magnetic fields. Gd_Bi2Se3 single crystals show Shubnikov-de Haas (SdH) oscillations with nontrivial Berry phase while Bi2Se3 single crystals show zero Berry phase in SdH oscillations. The temperature dependent magnetization curves can be well fitted with the Curie-Weiss law in 3-300 K region, indicating no magnetic ordering in Gd_Bi2Se3 crystals. Moreover, Gd doping has limited influence on the quantum oscillation parameters (e.g., frequency of oscillations, the area of the Fermi surface, effective electron mass, Fermi wave vectors etc.), but has an impact on the Hall mobility, carrier density, and band topology. Our results demonstrate that Gd doping can tune the Berry phase of topological insulators effectively, which may pave a way for the future realization of many predicted exotic transport phenomena of topological origin. |
| Publish Date | Title | Authors | Code | Abstract | |
|---|---|---|---|---|---|
| 2023-07-27 | PointOdyssey: A Large-Scale Synthetic Dataset for Long-Term Point Tracking | Yang Zheng et.al. | 2307.15055v1 | null | We introduce PointOdyssey, a large-scale synthetic dataset, and data generation framework, for the training and evaluation of long-term fine-grained tracking algorithms. Our goal is to advance the state-of-the-art by placing emphasis on long videos with naturalistic motion. Toward the goal of naturalism, we animate deformable characters using real-world motion capture data, we build 3D scenes to match the motion capture environments, and we render camera viewpoints using trajectories mined via structure-from-motion on real videos. We create combinatorial diversity by randomizing character appearance, motion profiles, materials, lighting, 3D assets, and atmospheric effects. Our dataset currently includes 104 videos, averaging 2,000 frames long, with orders of magnitude more correspondence annotations than prior work. We show that existing methods can be trained from scratch in our dataset and outperform the published variants. Finally, we introduce modifications to the PIPs point tracking method, greatly widening its temporal receptive field, which improves its performance on PointOdyssey as well as on two real-world benchmarks. Our data and code are publicly available at: https://pointodyssey.com |
| 2023-07-27 | MapNeRF: Incorporating Map Priors into Neural Radiance Fields for Driving View Simulation | Chenming Wu et.al. | 2307.14981v1 | null | Simulating camera sensors is a crucial task in autonomous driving. Although neural radiance fields are exceptional at synthesizing photorealistic views in driving simulations, they still fail in generating extrapolated views. This paper proposes to incorporate map priors into neural radiance fields to synthesize out-of-trajectory driving views with semantic road consistency. The key insight is that map information can be utilized as a prior to guide the training of the radiance fields with uncertainty. Specifically, we utilize the coarse ground surface as uncertain information to supervise the density field and warp depth with uncertainty from unknown camera poses to ensure multi-view consistency. Experimental results demonstrate that our approach can produce semantic consistency in deviated views for vehicle camera simulation. |
| 2023-07-27 | GET3D--: Learning GET3D from Unconstrained Image Collections | Fanghua Yu et.al. | 2307.14918v1 | null | The demand for efficient 3D model generation techniques has grown exponentially, as manual creation of 3D models is time-consuming and requires specialized expertise. While generative models have shown potential in creating 3D textured shapes from 2D images, their applicability in 3D industries is limited due to the lack of a well-defined camera distribution in real-world scenarios, resulting in low-quality shapes. To overcome this limitation, we propose GET3D--, the first method that directly generates textured 3D shapes from 2D images with unknown pose and scale. GET3D-- comprises a 3D shape generator and a learnable camera sampler that captures the 6D external changes on the camera. In addition, We propose a novel training schedule to stably optimize both the shape generator and camera sampler in a unified framework. By controlling external variations using the learnable camera sampler, our method can generate aligned shapes with clear textures. Extensive experiments demonstrate the efficacy of GET3D--, which precisely fits the 6D camera pose distribution and generates high-quality shapes on both synthetic and realistic unconstrained datasets. |
| 2023-07-27 | Weakly Supervised Multi-Modal 3D Human Body Pose Estimation for Autonomous Driving | Peter Bauer et.al. | 2307.14889v1 | null | Accurate 3D human pose estimation (3D HPE) is crucial for enabling autonomous vehicles (AVs) to make informed decisions and respond proactively in critical road scenarios. Promising results of 3D HPE have been gained in several domains such as human-computer interaction, robotics, sports and medical analytics, often based on data collected in well-controlled laboratory environments. Nevertheless, the transfer of 3D HPE methods to AVs has received limited research attention, due to the challenges posed by obtaining accurate 3D pose annotations and the limited suitability of data from other domains. We present a simple yet efficient weakly supervised approach for 3D HPE in the AV context by employing a high-level sensor fusion between camera and LiDAR data. The weakly supervised setting enables training on the target datasets without any 2D/3D keypoint labels by using an off-the-shelf 2D joint extractor and pseudo labels generated from LiDAR to image projections. Our approach outperforms state-of-the-art results by up to |
| 2023-07-27 | Learning Full-Head 3D GANs from a Single-View Portrait Dataset | Yiqian Wu et.al. | 2307.14770v1 | null | 33D-aware face generators are commonly trained on 2D real-life face image datasets. Nevertheless, existing facial recognition methods often struggle to extract face data captured from various camera angles. Furthermore, in-the-wild images with diverse body poses introduce a high-dimensional challenge for 3D-aware generators, making it difficult to utilize data that contains complete neck and shoulder regions. Consequently, these face image datasets often contain only near-frontal face data, which poses challenges for 3D-aware face generators to construct \textit{full-head} 3D portraits. To this end, we first create the dataset {$\it{360}^{\circ}$}-\textit{Portrait}-\textit{HQ} (\textit{$\it{360}^{\circ}$PHQ}), which consists of high-quality single-view real portraits annotated with a variety of camera parameters {(the yaw angles span the entire |
| 2023-07-27 | High Dynamic Range Imaging via Visual Attention Modules | Ali Reza Omrani et.al. | 2307.14705v1 | link | Thanks to High Dynamic Range (HDR) imaging methods, the scope of photography has seen profound changes recently. To be more specific, such methods try to reconstruct the lost luminosity of the real world caused by the limitation of regular cameras from the Low Dynamic Range (LDR) images. Additionally, although the State-Of-The-Art methods in this topic perform well, they mainly concentrate on combining different exposures and have less attention to extracting the informative parts of the images. Thus, this paper aims to introduce a new model capable of incorporating information from the most visible areas of each image extracted by a visual attention module (VAM), which is a result of a segmentation strategy. In particular, the model, based on a deep learning architecture, utilizes the extracted areas to produce the final HDR image. The results demonstrate that our method outperformed most of the State-Of-The-Art algorithms. |
| 2023-07-27 | FS-Depth: Focal-and-Scale Depth Estimation from a Single Image in Unseen Indoor Scene | Chengrui Wei et.al. | 2307.14624v1 | null | It has long been an ill-posed problem to predict absolute depth maps from single images in real (unseen) indoor scenes. We observe that it is essentially due to not only the scale-ambiguous problem but also the focal-ambiguous problem that decreases the generalization ability of monocular depth estimation. That is, images may be captured by cameras of different focal lengths in scenes of different scales. In this paper, we develop a focal-and-scale depth estimation model to well learn absolute depth maps from single images in unseen indoor scenes. First, a relative depth estimation network is adopted to learn relative depths from single images with diverse scales/semantics. Second, multi-scale features are generated by mapping a single focal length value to focal length features and concatenating them with intermediate features of different scales in relative depth estimation. Finally, relative depths and multi-scale features are jointly fed into an absolute depth estimation network. In addition, a new pipeline is developed to augment the diversity of focal lengths of public datasets, which are often captured with cameras of the same or similar focal lengths. Our model is trained on augmented NYUDv2 and tested on three unseen datasets. Our model considerably improves the generalization ability of depth estimation by 41%/13% (RMSE) with/without data augmentation compared with five recent SOTAs and well alleviates the deformation problem in 3D reconstruction. Notably, our model well maintains the accuracy of depth estimation on original NYUDv2. |
| 2023-07-27 | White-light superflare and long-term activity of the nearby M7 type binary EI~Cnc observed with GWAC system | Hua-Li Li et.al. | 2307.14594v1 | null | Stellar white-light flares are believed to play an essential role on the physical and chemical properties of the atmosphere of the surrounding exoplanets. Here we report an optical monitoring campaign on the nearby flaring system EI |
| 2023-07-27 | MCPA: Multi-scale Cross Perceptron Attention Network for 2D Medical Image Segmentation | Liang Xu et.al. | 2307.14588v1 | link | The UNet architecture, based on Convolutional Neural Networks (CNN), has demonstrated its remarkable performance in medical image analysis. However, it faces challenges in capturing long-range dependencies due to the limited receptive fields and inherent bias of convolutional operations. Recently, numerous transformer-based techniques have been incorporated into the UNet architecture to overcome this limitation by effectively capturing global feature correlations. However, the integration of the Transformer modules may result in the loss of local contextual information during the global feature fusion process. To overcome these challenges, we propose a 2D medical image segmentation model called Multi-scale Cross Perceptron Attention Network (MCPA). The MCPA consists of three main components: an encoder, a decoder, and a Cross Perceptron. The Cross Perceptron first captures the local correlations using multiple Multi-scale Cross Perceptron modules, facilitating the fusion of features across scales. The resulting multi-scale feature vectors are then spatially unfolded, concatenated, and fed through a Global Perceptron module to model global dependencies. Furthermore, we introduce a Progressive Dual-branch Structure to address the semantic segmentation of the image involving finer tissue structures. This structure gradually shifts the segmentation focus of MCPA network training from large-scale structural features to more sophisticated pixel-level features. We evaluate our proposed MCPA model on several publicly available medical image datasets from different tasks and devices, including the open large-scale dataset of CT (Synapse), MRI (ACDC), fundus camera (DRIVE, CHASE_DB1, HRF), and OCTA (ROSE). The experimental results show that our MCPA model achieves state-of-the-art performance. The code is available at https://github.com/simonustc/MCPA-for-2D-Medical-Image-Segmentation. |
| 2023-07-27 | A Memory-Augmented Multi-Task Collaborative Framework for Unsupervised Traffic Accident Detection in Driving Videos | Rongqin Liang et.al. | 2307.14575v1 | null | Identifying traffic accidents in driving videos is crucial to ensuring the safety of autonomous driving and driver assistance systems. To address the potential danger caused by the long-tailed distribution of driving events, existing traffic accident detection (TAD) methods mainly rely on unsupervised learning. However, TAD is still challenging due to the rapid movement of cameras and dynamic scenes in driving scenarios. Existing unsupervised TAD methods mainly rely on a single pretext task, i.e., an appearance-based or future object localization task, to detect accidents. However, appearance-based approaches are easily disturbed by the rapid movement of the camera and changes in illumination, which significantly reduce the performance of traffic accident detection. Methods based on future object localization may fail to capture appearance changes in video frames, making it difficult to detect ego-involved accidents (e.g., out of control of the ego-vehicle). In this paper, we propose a novel memory-augmented multi-task collaborative framework (MAMTCF) for unsupervised traffic accident detection in driving videos. Different from previous approaches, our method can more accurately detect both ego-involved and non-ego accidents by simultaneously modeling appearance changes and object motions in video frames through the collaboration of optical flow reconstruction and future object localization tasks. Further, we introduce a memory-augmented motion representation mechanism to fully explore the interrelation between different types of motion representations and exploit the high-level features of normal traffic patterns stored in memory to augment motion representations, thus enlarging the difference from anomalies. Experimental results on recently published large-scale dataset demonstrate that our method achieves better performance compared to previous state-of-the-art approaches. |
| 2023-07-26 | Patterns of Vehicle Lights: Addressing Complexities in Curation and Annotation of Camera-Based Vehicle Light Datasets and Metrics | Ross Greer et.al. | 2307.14521v1 | null | This paper explores the representation of vehicle lights in computer vision and its implications for various tasks in the field of autonomous driving. Different specifications for representing vehicle lights, including bounding boxes, center points, corner points, and segmentation masks, are discussed in terms of their strengths and weaknesses. Three important tasks in autonomous driving that can benefit from vehicle light detection are identified: nighttime vehicle detection, 3D vehicle orientation estimation, and dynamic trajectory cues. Each task may require a different representation of the light. The challenges of collecting and annotating large datasets for training data-driven models are also addressed, leading to introduction of the LISA Vehicle Lights Dataset and associated Light Visibility Model, which provides light annotations specifically designed for downstream applications in vehicle detection, intent and trajectory prediction, and safe path planning. A comparison of existing vehicle light datasets is provided, highlighting the unique features and limitations of each dataset. Overall, this paper provides insights into the representation of vehicle lights and the importance of accurate annotations for training effective detection models in autonomous driving applications. Our dataset and model are made available at https://cvrr.ucsd.edu/vehicle-lights-dataset |
| 2023-07-26 | Technical note: ShinyAnimalCV: open-source cloud-based web application for object detection, segmentation, and three-dimensional visualization of animals using computer vision | Jin Wang et.al. | 2307.14487v1 | null | Computer vision (CV), a non-intrusive and cost-effective technology, has furthered the development of precision livestock farming by enabling optimized decision-making through timely and individualized animal care. The availability of affordable two- and three-dimensional camera sensors, combined with various machine learning and deep learning algorithms, has provided a valuable opportunity to improve livestock production systems. However, despite the availability of various CV tools in the public domain, applying these tools to animal data can be challenging, often requiring users to have programming and data analysis skills, as well as access to computing resources. Moreover, the rapid expansion of precision livestock farming is creating a growing need to educate and train animal science students in CV. This presents educators with the challenge of efficiently demonstrating the complex algorithms involved in CV. Thus, the objective of this study was to develop ShinyAnimalCV, an open-source cloud-based web application. This application provides a user-friendly interface for performing CV tasks, including object segmentation, detection, three-dimensional surface visualization, and extraction of two- and three-dimensional morphological features. Nine pre-trained CV models using top-view animal data are included in the application. ShinyAnimalCV has been deployed online using cloud computing platforms. The source code of ShinyAnimalCV is available on GitHub, along with detailed documentation on training CV models using custom data and deploying ShinyAnimalCV locally to allow users to fully leverage the capabilities of the application. ShinyAnimalCV can contribute to CV research and teaching in the animal science community. |
| 2023-07-26 | AutoSourceID-Classifier. Star-Galaxy Classification using a Convolutional Neural Network with Spatial Information | F. Stoppa et.al. | 2307.14456v1 | null | Aims. Traditional star-galaxy classification techniques often rely on feature estimation from catalogues, a process susceptible to introducing inaccuracies, thereby potentially jeopardizing the classification's reliability. Certain galaxies, especially those not manifesting as extended sources, can be misclassified when their shape parameters and flux solely drive the inference. We aim to create a robust and accurate classification network for identifying stars and galaxies directly from astronomical images. By leveraging convolutional neural networks (CNN) and additional information about the source position, we aim to accurately classify all stars and galaxies within a survey, particularly those with a signal-to-noise ratio (S/N) near the detection limit. Methods. The AutoSourceID-Classifier (ASID-C) algorithm developed here uses 32x32 pixel single filter band source cutouts generated by the previously developed ASID-L code. ASID-C utilizes CNNs to distinguish these cutouts into stars or galaxies, leveraging their strong feature-learning capabilities. Subsequently, we employ a modified Platt Scaling calibration for the output of the CNN. This technique ensures that the derived probabilities are effectively calibrated, delivering precise and reliable results. Results. We show that ASID-C, trained on MeerLICHT telescope images and using the Dark Energy Camera Legacy Survey (DECaLS) morphological classification, outperforms similar codes like SourceExtractor. ASID-C opens up new possibilities for accurate celestial object classification, especially for sources with a S/N near the detection limit. Potential applications of ASID-C, like real-time star-galaxy classification and transient's host identification, promise significant contributions to astronomical research. |
| 2023-07-26 | US & MR Image-Fusion Based on Skin Co-Registration | Martina Paccini et.al. | 2307.14288v1 | null | The study and development of innovative solutions for the advanced visualisation, representation and analysis of medical images offer different research directions. Current practice in medical imaging consists in combining real-time US with imaging modalities that allow internal anatomy acquisitions, such as CT, MRI, PET or similar. Application of image-fusion approaches can be found in tracking surgical tools and/or needles, in real-time during interventions. Thus, this work proposes a fusion imaging system for the registration of CT and MRI images with real-time US acquisition leveraging a 3D camera sensor. The main focus of the work is the portability of the system and its applicability to different anatomical districts. |
| 2023-07-26 | Probing reflection from aerosols with the near-infrared dayside spectrum of WASP-80b | Bob Jacobs et.al. | 2307.14399v1 | null | The presence of aerosols is intimately linked to the global energy budget and composition of planet atmospheres. Their ability to reflect incoming light prevents energy from being deposited into the atmosphere, and they shape spectra of exoplanets. We observed one near-infrared secondary eclipse of WASP-80b with the Wide Field Camera 3 aboard the Hubble Space Telescope to provide constraints on the presence and properties of atmospheric aerosols. We detect a broadband eclipse depth of |
| 2023-07-26 | DisguisOR: Holistic Face Anonymization for the Operating Room | Lennart Bastian et.al. | 2307.14241v1 | link | Purpose: Recent advances in Surgical Data Science (SDS) have contributed to an increase in video recordings from hospital environments. While methods such as surgical workflow recognition show potential in increasing the quality of patient care, the quantity of video data has surpassed the scale at which images can be manually anonymized. Existing automated 2D anonymization methods under-perform in Operating Rooms (OR), due to occlusions and obstructions. We propose to anonymize multi-view OR recordings using 3D data from multiple camera streams. Methods: RGB and depth images from multiple cameras are fused into a 3D point cloud representation of the scene. We then detect each individual's face in 3D by regressing a parametric human mesh model onto detected 3D human keypoints and aligning the face mesh with the fused 3D point cloud. The mesh model is rendered into every acquired camera view, replacing each individual's face. Results: Our method shows promise in locating faces at a higher rate than existing approaches. DisguisOR produces geometrically consistent anonymizations for each camera view, enabling more realistic anonymization that is less detrimental to downstream tasks. Conclusion: Frequent obstructions and crowding in operating rooms leaves significant room for improvement for off-the-shelf anonymization methods. DisguisOR addresses privacy on a scene level and has the potential to facilitate further research in SDS. |
| 2023-07-26 | The nature of the X-ray sources in dwarf galaxies in nearby clusters from the KIWICS | Şeyda Şen et.al. | 2307.14230v1 | null | We present a deep search for and analysis of X-ray sources in a sample of dwarf galaxies (M${r}$ < -15.5 mag) located within twelve galaxy clusters from the Kapteyn IAC WEAVE INT Cluster Survey (KIWICS) of photometric observations in the $\textit{r}$ and $\textit{g}$ using the Wide Field Camera (WFC) at the 2.5-m Isaac Newton telescope (INT). We first investigated the optical data, identified 2720 dwarf galaxies in all fields and determined their characteristics; namely, their colors, effective radii, and stellar masses. We then searched the $\textit{Chandra}$ data archive for X-ray counterparts of optically detected dwarf galaxies. We found a total of 20 X-ray emitting dwarf galaxies, with X-ray flux ranging from 1.7$\times10^{-15}$ to 4.1$\times10^{-14}$ erg cm$^{-2}$ s$^{-1}$ and X-ray luminosities varying from 2$\times10^{39}$ to 5.4$\times10^{41}$ erg s$^{-1}$. Our results indicate that the X-ray luminosity of the sources in our sample is larger than the Eddington luminosity limit for a typical neutron star, even at the lowest observed levels. This leads us to conclude that the sources emitting X-rays in our sample are likely black holes. Additionally, we have employed a scaling relation between black hole and stellar mass to estimate the masses of the black holes in our sample, and have determined a range of black hole masses from 4.6$\times10^{4}$ to 1.5$\times10^{6}$ M$\odot$. Finally, we find a trend between X-ray to optical flux ratio and X-ray flux. We discuss the implications of our findings and highlight the importance of X-ray observations in studying the properties of dwarf galaxies. |
| 2023-07-26 | Tackling Scattering and Reflective Flare in Mobile Camera Systems: A Raw Image Dataset for Enhanced Flare Removal | Fengbo Lan et.al. | 2307.14180v1 | null | The increasing prevalence of mobile devices has led to significant advancements in mobile camera systems and improved image quality. Nonetheless, mobile photography still grapples with challenging issues such as scattering and reflective flare. The absence of a comprehensive real image dataset tailored for mobile phones hinders the development of effective flare mitigation techniques. To address this issue, we present a novel raw image dataset specifically designed for mobile camera systems, focusing on flare removal. Capitalizing on the distinct properties of raw images, this dataset serves as a solid foundation for developing advanced flare removal algorithms. It encompasses a wide variety of real-world scenarios captured with diverse mobile devices and camera settings. The dataset comprises over 2,000 high-quality full-resolution raw image pairs for scattering flare and 1,100 for reflective flare, which can be further segmented into up to 30,000 and 2,200 paired patches, respectively, ensuring broad adaptability across various imaging conditions. Experimental results demonstrate that networks trained with synthesized data struggle to cope with complex lighting settings present in this real image dataset. We also show that processing data through a mobile phone's internal ISP compromises image quality while using raw image data presents significant advantages for addressing the flare removal problem. Our dataset is expected to enable an array of new research in flare removal and contribute to substantial improvements in mobile image quality, benefiting mobile photographers and end-users alike. |
| 2023-07-26 | Memory-Efficient Graph Convolutional Networks for Object Classification and Detection with Event Cameras | Kamil Jeziorek et.al. | 2307.14124v1 | null | Recent advances in event camera research emphasize processing data in its original sparse form, which allows the use of its unique features such as high temporal resolution, high dynamic range, low latency, and resistance to image blur. One promising approach for analyzing event data is through graph convolutional networks (GCNs). However, current research in this domain primarily focuses on optimizing computational costs, neglecting the associated memory costs. In this paper, we consider both factors together in order to achieve satisfying results and relatively low model complexity. For this purpose, we performed a comparative analysis of different graph convolution operations, considering factors such as execution time, the number of trainable model parameters, data format requirements, and training outcomes. Our results show a 450-fold reduction in the number of parameters for the feature extraction module and a 4.5-fold reduction in the size of the data representation while maintaining a classification accuracy of 52.3%, which is 6.3% higher compared to the operation used in state-of-the-art approaches. To further evaluate performance, we implemented the object detection architecture and evaluated its performance on the N-Caltech101 dataset. The results showed an accuracy of 53.7 % mAP@0.5 and reached an execution rate of 82 graphs per second. |
| 2023-07-26 | Learning heterogeneous delays in a layer of spiking neurons for fast motion detection | Antoine Grimaldi et.al. | 2307.14077v1 | null | The precise timing of spikes emitted by neurons plays a crucial role in shaping the response of efferent biological neurons. This temporal dimension of neural activity holds significant importance in understanding information processing in neurobiology, especially for the performance of neuromorphic hardware, such as event-based cameras. Nonetheless, many artificial neural models disregard this critical temporal dimension of neural activity. In this study, we present a model designed to efficiently detect temporal spiking motifs using a layer of spiking neurons equipped with heterogeneous synaptic delays. Our model capitalizes on the diverse synaptic delays present on the dendritic tree, enabling specific arrangements of temporally precise synaptic inputs to synchronize upon reaching the basal dendritic tree. We formalize this process as a time-invariant logistic regression, which can be trained using labeled data. To demonstrate its practical efficacy, we apply the model to naturalistic videos transformed into event streams, simulating the output of the biological retina or event-based cameras. To evaluate the robustness of the model in detecting visual motion, we conduct experiments by selectively pruning weights and demonstrate that the model remains efficient even under significantly reduced workloads. In conclusion, by providing a comprehensive, event-driven computational building block, the incorporation of heterogeneous delays has the potential to greatly improve the performance of future spiking neural network algorithms, particularly in the context of neuromorphic chips. |
| 2023-07-26 | Three-year performance of the IceAct telescopes at the IceCube Neutrino Observatory | Lars Heuermann et.al. | 2307.13969v1 | null | IceAct is an array of compact Imaging Air Cherenkov Telescopes at the ice surface as part of the IceCube Neutrino Observatory. The telescopes, featuring a camera of 61 silicon photomultipliers and fresnel-lens-based optics, are optimized to be operated in harsh environmental conditions, such as at the South Pole. Since 2019, the first two telescopes have been operating in a stereoscopic configuration in the center of IceCube's surface detector IceTop. With an energy threshold of about 10 TeV and a wide field-of-view, the IceAct telescopes show promising capabilities of improving current cosmic-ray composition studies: measuring the Cherenkov light emissions in the atmosphere adds new information about the shower development not accessible with the current detectors. First simulations indicate that the added information of a single telescope leads, e.g., to an improved discrimination between flux contributions from different primary particle species in the sensitive energy range. We review the performance and detector operations of the telescopes during the past 3 years (2020-2022) and give an outlook on the future of IceAct. |
| 2023-07-26 | Towards a cosmic ray composition measurement with the IceAct telescopes at the IceCube Neutrino Observatory | Larissa Paul et.al. | 2307.13965v1 | null | The IceCube Neutrino Observatory is equipped with the unique possibility to measure cosmic ray induced air showers simultaneously by their particle footprint on the surface with the IceTop detector and by the high-energy muonic shower component at a depth of more than 1.5 km. Since 2019 additionally two Imaging Air Cherenkov Telescopes, called IceAct, measure the electromagnetic component of air showers in the atmosphere above the IceCube detector. This opens the possibility to measure air shower parameters in three independent detectors and allows to improve mass composition studies with the IceCube data. One IceAct camera consists of 61 SiPM pixels in a hexagonal grid. Each pixel has a field of view of 1.5 degree resulting in an approximately 12-degree field of view per camera. A single telescope tube has a diameter of 50 cm, is built robust enough to withstand the harsh Antarctic conditions, and is able to detect cosmic ray particles with energies above approximately 10 TeV. A Graph Neural Network (GNN) is trained to determine the air shower properties from IceAct data. The composition analysis is then performed using Random Forest Regression (RF). Since all three detectors have a different energy threshold, we train several RFs with different inputs, combining the different detectors and taking advantage of the lower energy threshold of the IceAct telescopes. This will result in composition measurements for different detector combinations and enables cross-checks of the results in overlapping energy bands. We present the method, parameters for data selection, and the status of this analysis. |
| 2023-07-25 | Decisive Data using Multi-Modality Optical Sensors for Advanced Vehicular Systems | Muhammad Ali Farooq et.al. | 2307.13600v1 | null | Optical sensors have played a pivotal role in acquiring real world data for critical applications. This data, when integrated with advanced machine learning algorithms provides meaningful information thus enhancing human vision. This paper focuses on various optical technologies for design and development of state-of-the-art out-cabin forward vision systems and in-cabin driver monitoring systems. The focused optical sensors include Longwave Thermal Imaging (LWIR) cameras, Near Infrared (NIR), Neuromorphic/ event cameras, Visible CMOS cameras and Depth cameras. Further the paper discusses different potential applications which can be employed using the unique strengths of each these optical modalities in real time environment. |
| 2023-07-25 | HeightFormer: Explicit Height Modeling without Extra Data for Camera-only 3D Object Detection in Bird's Eye View | Yiming Wu et.al. | 2307.13510v1 | null | Vision-based Bird's Eye View (BEV) representation is an emerging perception formulation for autonomous driving. The core challenge is to construct BEV space with multi-camera features, which is a one-to-many ill-posed problem. Diving into all previous BEV representation generation methods, we found that most of them fall into two types: modeling depths in image views or modeling heights in the BEV space, mostly in an implicit way. In this work, we propose to explicitly model heights in the BEV space, which needs no extra data like LiDAR and can fit arbitrary camera rigs and types compared to modeling depths. Theoretically, we give proof of the equivalence between height-based methods and depth-based methods. Considering the equivalence and some advantages of modeling heights, we propose HeightFormer, which models heights and uncertainties in a self-recursive way. Without any extra data, the proposed HeightFormer could estimate heights in BEV accurately. Benchmark results show that the performance of HeightFormer achieves SOTA compared with those camera-only methods. |
| 2023-07-25 | Prior Based Online Lane Graph Extraction from Single Onboard Camera Image | Yigit Baran Can et.al. | 2307.13344v1 | null | The local road network information is essential for autonomous navigation. This information is commonly obtained from offline HD-Maps in terms of lane graphs. However, the local road network at a given moment can be drastically different than the one given in the offline maps; due to construction works, accidents etc. Moreover, the autonomous vehicle might be at a location not covered in the offline HD-Map. Thus, online estimation of the lane graph is crucial for widespread and reliable autonomous navigation. In this work, we tackle online Bird's-Eye-View lane graph extraction from a single onboard camera image. We propose to use prior information to increase quality of the estimations. The prior is extracted from the dataset through a transformer based Wasserstein Autoencoder. The autoencoder is then used to enhance the initial lane graph estimates. This is done through optimization of the latent space vector. The optimization encourages the lane graph estimation to be logical by discouraging it to diverge from the prior distribution. We test the method on two benchmark datasets, NuScenes and Argoverse. The results show that the proposed method significantly improves the performance compared to state-of-the-art methods. |
| 2023-07-25 | A Visual Quality Assessment Method for Raster Images in Scanned Document | Justin Yang et.al. | 2307.13241v1 | null | Image quality assessment (IQA) is an active research area in the field of image processing. Most prior works focus on visual quality of natural images captured by cameras. In this paper, we explore visual quality of scanned documents, focusing on raster image areas. Different from many existing works which aim to estimate a visual quality score, we propose a machine learning based classification method to determine whether the visual quality of a scanned raster image at a given resolution setting is acceptable. We conduct a psychophysical study to determine the acceptability at different image resolutions based on human subject ratings and use them as the ground truth to train our machine learning model. However, this dataset is unbalanced as most images were rated as visually acceptable. To address the data imbalance problem, we introduce several noise models to simulate the degradation of image quality during the scanning process. Our results show that by including augmented data in training, we can significantly improve the performance of the classifier to determine whether the visual quality of raster images in a scanned document is acceptable or not for a given resolution setting. |
| 2023-07-24 | Why Don't You Clean Your Glasses? Perception Attacks with Dynamic Optical Perturbations | Yi Han et.al. | 2307.13131v1 | null | Camera-based autonomous systems that emulate human perception are increasingly being integrated into safety-critical platforms. Consequently, an established body of literature has emerged that explores adversarial attacks targeting the underlying machine learning models. Adapting adversarial attacks to the physical world is desirable for the attacker, as this removes the need to compromise digital systems. However, the real world poses challenges related to the "survivability" of adversarial manipulations given environmental noise in perception pipelines and the dynamicity of autonomous systems. In this paper, we take a sensor-first approach. We present EvilEye, a man-in-the-middle perception attack that leverages transparent displays to generate dynamic physical adversarial examples. EvilEye exploits the camera's optics to induce misclassifications under a variety of illumination conditions. To generate dynamic perturbations, we formalize the projection of a digital attack into the physical domain by modeling the transformation function of the captured image through the optical pipeline. Our extensive experiments show that EvilEye's generated adversarial perturbations are much more robust across varying environmental light conditions relative to existing physical perturbation frameworks, achieving a high attack success rate (ASR) while bypassing state-of-the-art physical adversarial detection frameworks. We demonstrate that the dynamic nature of EvilEye enables attackers to adapt adversarial examples across a variety of objects with a significantly higher ASR compared to state-of-the-art physical world attack frameworks. Finally, we discuss mitigation strategies against the EvilEye attack. |
| 2023-07-24 | Automatic Infant Respiration Estimation from Video: A Deep Flow-based Algorithm and a Novel Public Benchmark | Sai Kumar Reddy Manne et.al. | 2307.13110v1 | link | Respiration is a critical vital sign for infants, and continuous respiratory monitoring is particularly important for newborns. However, neonates are sensitive and contact-based sensors present challenges in comfort, hygiene, and skin health, especially for preterm babies. As a step toward fully automatic, continuous, and contactless respiratory monitoring, we develop a deep-learning method for estimating respiratory rate and waveform from plain video footage in natural settings. Our automated infant respiration flow-based network (AIRFlowNet) combines video-extracted optical flow input and spatiotemporal convolutional processing tuned to the infant domain. We support our model with the first public annotated infant respiration dataset with 125 videos (AIR-125), drawn from eight infant subjects, set varied pose, lighting, and camera conditions. We include manual respiration annotations and optimize AIRFlowNet training on them using a novel spectral bandpass loss function. When trained and tested on the AIR-125 infant data, our method significantly outperforms other state-of-the-art methods in respiratory rate estimation, achieving a mean absolute error of $\sim$2.9 breaths per minute, compared to $\sim$4.7--6.2 for other public models designed for adult subjects and more uniform environments. |
| 2023-07-24 | Freeform three-mirror anastigmatic large-aperture telescope and receiver optics for CMB-S4 | Patricio A. Gallardo et.al. | 2307.12931v1 | null | CMB-S4, the next-generation ground-based cosmic microwave background (CMB) observatory, will provide detailed maps of the CMB at millimeter wavelengths to dramatically advance our understanding of the origin and evolution of the universe. CMB-S4 will deploy large and small aperture telescopes with hundreds of thousands of detectors to observe the CMB at arcminute and degree resolutions at millimeter wavelengths. Inflationary science benefits from a deep delensing survey at arcminute resolutions capable of observing a large field of view at millimeter wavelengths. This kind of survey acts as a complement to a degree angular resolution survey. The delensing survey requires a nearly uniform distribution of cameras per frequency band across the focal plane. We present a large-throughput, large-aperture (5-meter diameter) freeform three-mirror anastigmatic telescope and an array of 85 cameras for CMB observations at arcminute resolutions, which meets the needs of the delensing survey of CMB-S4. A detailed prescription of this three-mirror telescope and cameras is provided, with a series of numerical calculations that indicate expected optical performance and mechanical tolerance. |
| 2023-07-24 | Trust-aware Safe Control for Autonomous Navigation: Estimation of System-to-human Trust for Trust-adaptive Control Barrier Functions | Saad Ejaz et.al. | 2307.12815v1 | null | A trust-aware safe control system for autonomous navigation in the presence of humans, specifically pedestrians, is presented. The system combines model predictive control (MPC) with control barrier functions (CBFs) and trust estimation to ensure safe and reliable navigation in complex environments. Pedestrian trust values are computed based on features, extracted from camera sensor images, such as mutual eye contact and smartphone usage. These trust values are integrated into the MPC controller's CBF constraints, allowing the autonomous vehicle to make informed decisions considering pedestrian behavior. Simulations conducted in the CARLA driving simulator demonstrate the feasibility and effectiveness of the proposed system, showcasing more conservative behaviour around inattentive pedestrians and vice versa. The results highlight the practicality of the system in real-world applications, providing a promising approach to enhance the safety and reliability of autonomous navigation systems, especially self-driving vehicles. |
| Publish Date | Title | Authors | Code | Abstract | |
|---|---|---|---|---|---|
| 2023-07-27 | Cavity-Mediated Molecular Entanglement and Generation of Non-Classical States of Light | Davis M. Welakuh et.al. | 2307.15047v1 | null | The generation and control of entanglement in a quantum mechanical system is a critical element of nearly all quantum applications. Molecular systems are a promising candidate, with numerous degrees of freedom able to be targeted. However, knowledge of inter-system entanglement mechanisms in such systems is limited. In this work, we demonstrate the generation of entanglement between vibrational degrees of freedom in molecules via strong coupling to a cavity mode driven by a weak coherent field. In a bi-molecular system, we show entanglement can not only be generated between the cavity and molecular system, but also between molecules. This process also results in the generation of non-classical states of light, providing potential pathways for harnessing entanglement in molecular systems. |
| 2023-07-27 | Smart Contract Migration: Security Analysis and Recommendations from Ethereum to Arbitrum | Xueyan Tang et.al. | 2307.14773v1 | null | This research aims to explore the security risks posed by compatibility and protocol differences in smart contract migration, using the migration of smart contracts from Ethereum to Arbitrum as a case study. Through literature review, online data collection, expert participation, and analysis of smart contract vulnerability cases, this paper conducts an in-depth research of the differences between Ethereum and Arbitrum in areas such as Messaging, Block Properties, Contract Address Alias, and Gas Fees. The research findings indicate the presence of certain security issues during the migration process from Ethereum to Arbitrum, such as abnormal operation of the sequencer resulting in outdated off-chain data retrieval, time-based logical errors, failed permission checks, DOS attacks, and gas loss due to L1-to-L2 transaction failures. To address these security issues, this paper proposes corresponding solutions and recommendations to ensure the security and meet the requirements of the migration process. Additionally, this research emphasizes the continued attention and support for the security issues of smart contract migration through the case of smart contract migration from Ethereum to Arbitrum. It is worth noting that this research is the first in-depth research of smart contract security migration from Ethereum to Arbitrum. |
| 2023-07-27 | How to Train Your YouTube Recommender | Alexander Liu et.al. | 2307.14551v1 | null | YouTube provides features for users to indicate disinterest when presented with unwanted recommendations, such as the Not interested'' and Don't recommend channel'' buttons. These buttons are purported to allow the user to correct mistakes'' made by the recommendation system. Yet, relatively little is known about the empirical efficacy of these buttons. Neither is much known about users' awareness of and confidence in them. To address these gaps, we simulated YouTube users with sock puppet agents. Each agent first executed a stain phase'', where it watched many videos of one assigned topic; then it executed a scrub phase'', where it tried to remove recommendations of the assigned topic. Each agent repeatedly applied a single scrubbing strategy, which included disliking previously-watched videos or deleting them from watch history, as well as clicking the not interested'' or don\'t recommend channel'' button on newly-recommended videos. Overall, we found that the stain phase significantly increased the fraction of the recommended videos on the user\'s homepage dedicated to the assigned topic. For the scrub phase, using the Not interested'' button worked best, significantly reducing such recommendations in all topics tested, on average removing 88% of them. Neither the stain phase nor the scrub phase, however, had much effect on videopage recommendations (those given to users while they watch a video). We also ran a survey ( |
| 2023-07-26 | Event-based Vision for Early Prediction of Manipulation Actions | Daniel Deniz et.al. | 2307.14332v1 | null | Neuromorphic visual sensors are artificial retinas that output sequences of asynchronous events when brightness changes occur in the scene. These sensors offer many advantages including very high temporal resolution, no motion blur and smart data compression ideal for real-time processing. In this study, we introduce an event-based dataset on fine-grained manipulation actions and perform an experimental study on the use of transformers for action prediction with events. There is enormous interest in the fields of cognitive robotics and human-robot interaction on understanding and predicting human actions as early as possible. Early prediction allows anticipating complex stages for planning, enabling effective and real-time interaction. Our Transformer network uses events to predict manipulation actions as they occur, using online inference. The model succeeds at predicting actions early on, building up confidence over time and achieving state-of-the-art classification. Moreover, the attention-based transformer architecture allows us to study the role of the spatio-temporal patterns selected by the model. Our experiments show that the Transformer network captures action dynamic features outperforming video-based approaches and succeeding with scenarios where the differences between actions lie in very subtle cues. Finally, we release the new event dataset, which is the first in the literature for manipulation action recognition. Code will be available at https://github.com/DaniDeniz/EventVisionTransformer. |
| 2023-07-26 | Simulation of Open Quantum Systems via Low-Depth Convex Unitary Evolutions | Joseph Peetz et.al. | 2307.14325v2 | null | Simulating physical systems on quantum devices is one of the most promising applications of quantum technology. Current quantum approaches to simulating open quantum systems are still practically challenging on NISQ-era devices, because they typically require ancilla qubits and extensive controlled sequences. In this work, we propose a hybrid quantum-classical approach for simulating a class of open system dynamics called random-unitary channels. These channels naturally decompose into a series of convex unitary evolutions, which can then be efficiently sampled and run as independent circuits. The method does not require deep ancilla frameworks and thus can be implemented with lower noise costs. We implement simulations of open quantum systems up to dozens of qubits and with large channel rank. |
| 2023-07-26 | Large-scale Fully-Unsupervised Re-Identification | Gabriel Bertocco et.al. | 2307.14278v1 | null | Fully-unsupervised Person and Vehicle Re-Identification have received increasing attention due to their broad applicability in surveillance, forensics, event understanding, and smart cities, without requiring any manual annotation. However, most of the prior art has been evaluated in datasets that have just a couple thousand samples. Such small-data setups often allow the use of costly techniques in time and memory footprints, such as Re-Ranking, to improve clustering results. Moreover, some previous work even pre-selects the best clustering hyper-parameters for each dataset, which is unrealistic in a large-scale fully-unsupervised scenario. In this context, this work tackles a more realistic scenario and proposes two strategies to learn from large-scale unlabeled data. The first strategy performs a local neighborhood sampling to reduce the dataset size in each iteration without violating neighborhood relationships. A second strategy leverages a novel Re-Ranking technique, which has a lower time upper bound complexity and reduces the memory complexity from O(n^2) to O(kn) with k << n. To avoid the pre-selection of specific hyper-parameter values for the clustering algorithm, we also present a novel scheduling algorithm that adjusts the density parameter during training, to leverage the diversity of samples and keep the learning robust to noisy labeling. Finally, due to the complementary knowledge learned by different models, we also introduce a co-training strategy that relies upon the permutation of predicted pseudo-labels, among the backbones, with no need for any hyper-parameters or weighting optimization. The proposed methodology outperforms the state-of-the-art methods in well-known benchmarks and in the challenging large-scale Veri-Wild dataset, with a faster and memory-efficient Re-Ranking strategy, and a large-scale, noisy-robust, and ensemble-based learning approach. |
| 2023-07-25 | Integration of Digital Twin and Federated Learning for Securing Vehicular Internet of Things | Deepti Gupta et.al. | 2307.13794v1 | null | In the present era of advanced technology, the Internet of Things (IoT) plays a crucial role in enabling smart connected environments. This includes various domains such as smart homes, smart healthcare, smart cities, smart vehicles, and many others.With ubiquitous smart connected devices and systems, a large amount of data associated with them is at a prime risk from malicious entities (e.g., users, devices, applications) in these systems. Innovative technologies, including cloud computing, Machine Learning (ML), and data analytics, support the development of anomaly detection models for the Vehicular Internet of Things (V-IoT), which encompasses collaborative automatic driving and enhanced transportation systems. However, traditional centralized anomaly detection models fail to provide better services for connected vehicles due to issues such as high latency, privacy leakage, performance overhead, and model drift. Recently, Federated Learning (FL) has gained significant recognition for its ability to address data privacy concerns in the IoT domain. Digital Twin (DT), proves beneficial in addressing uncertain crises and data security issues by creating a virtual replica that simulates various factors, including traffic trajectories, city policies, and vehicle utilization. However, the effectiveness of a V-IoT DT system heavily relies on the collection of long-term and high-quality data to make appropriate decisions. This paper introduces a Hierarchical Federated Learning (HFL) based anomaly detection model for V-IoT, aiming to enhance the accuracy of the model. Our proposed model integrates both DT and HFL approaches to create a comprehensive system for detecting malicious activities using an anomaly detection model. Additionally, real-world V-IoT use case scenarios are presented to demonstrate the application of the proposed model. |
| 2023-07-25 | ChildGAN: Large Scale Synthetic Child Facial Data Using Domain Adaptation in StyleGAN | Muhammad Ali Farooq et.al. | 2307.13746v1 | null | In this research work, we proposed a novel ChildGAN, a pair of GAN networks for generating synthetic boys and girls facial data derived from StyleGAN2. ChildGAN is built by performing smooth domain transfer using transfer learning. It provides photo-realistic, high-quality data samples. A large-scale dataset is rendered with a variety of smart facial transformations: facial expressions, age progression, eye blink effects, head pose, skin and hair color variations, and variable lighting conditions. The dataset comprises more than 300k distinct data samples. Further, the uniqueness and characteristics of the rendered facial features are validated by running different computer vision application tests which include CNN-based child gender classifier, face localization and facial landmarks detection test, identity similarity evaluation using ArcFace, and lastly running eye detection and eye aspect ratio tests. The results demonstrate that synthetic child facial data of high quality offers an alternative to the cost and complexity of collecting a large-scale dataset from real children. |
| 2023-07-25 | Insights into Cognitive Engagement: Comparing the Effectiveness of Game-Based and Video-Based Learning | Shayla Sharmin et.al. | 2307.13637v1 | null | The analysis of brain signals holds considerable importance in enhancing our comprehension of diverse learning techniques and cognitive mechanisms. Game-based learning is increasingly being recognized for its interactive and engaging educational approach. A pilot study of twelve participants divided into experimental and control groups was conducted to understand its effects on cognitive processes. Both groups were provided with the same contents regarding the basic structure of the graph. The participants in the experimental group engaged in a quiz-based game, while those in the control group watched a pre-recorded video. Functional Near-Infrared Spectroscopy (fNIRS) was employed to acquire cerebral signals, and a series of pre and post-tests were administered. The findings of our study indicate that the group engaged in the game activity displayed elevated levels of oxygenated hemoglobin compared to the group involved in watching videos. Conversely, the deoxygenated hemoglobin levels remained relatively consistent across both groups throughout the learning process. The aforementioned findings suggest that the use of game-based learning has a substantial influence on cognitive processes. Furthermore, it is evident that both the game and video groups exhibited higher neural activity in the Lateral Prefrontal cortex (PFC). The oxygenated hemoglobin ratio demonstrates that the game group had 2.33 times more neural processing in the Lateral PFC than the video group. This data is further supported by the knowledge gain analysis, which indicates that the game-based approach resulted in a 47.74% higher knowledge gain than the video group, as calculated from the difference in pre-and post-test scores. |
| 2023-07-25 | On-Device Speaker Anonymization of Acoustic Embeddings for ASR based onFlexible Location Gradient Reversal Layer | Md Asif Jalal et.al. | 2307.13343v1 | null | Smart devices serviced by large-scale AI models necessitates user data transfer to the cloud for inference. For speech applications, this means transferring private user information, e.g., speaker identity. Our paper proposes a privacy-enhancing framework that targets speaker identity anonymization while preserving speech recognition accuracy for our downstream task~-~Automatic Speech Recognition (ASR). The proposed framework attaches flexible gradient reversal based speaker adversarial layers to target layers within an ASR model, where speaker adversarial training anonymizes acoustic embeddings generated by the targeted layers to remove speaker identity. We propose on-device deployment by execution of initial layers of the ASR model, and transmitting anonymized embeddings to the cloud, where the rest of the model is executed while preserving privacy. Experimental results show that our method efficiently reduces speaker recognition relative accuracy by 33%, and improves ASR performance by achieving 6.2% relative Word Error Rate (WER) reduction. |
| 2023-07-25 | A Pairwise Dataset for GUI Conversion and Retrieval between Android Phones and Tablets | Han Hu et.al. | 2307.13225v1 | null | With the popularity of smartphones and tablets, users have become accustomed to using different devices for different tasks, such as using their phones to play games and tablets to watch movies. To conquer the market, one app is often available on both smartphones and tablets. However, although one app has similar graphic user interfaces (GUIs) and functionalities on phone and tablet, current app developers typically start from scratch when developing a tablet-compatible version of their app, which drives up development costs and wastes existing design resources. Researchers are attempting to employ deep learning in automated GUIs development to enhance developers' productivity. Deep learning models rely heavily on high-quality datasets. There are currently several publicly accessible GUI page datasets for phones, but none for pairwise GUIs between phones and tablets. This poses a significant barrier to the employment of deep learning in automated GUI development. In this paper, we collect and make public the Papt dataset, which is a pairwise dataset for GUI conversion and retrieval between Android phones and tablets. The dataset contains 10,035 phone-tablet GUI page pairs from 5,593 phone-tablet app pairs. We illustrate the approaches of collecting pairwise data and statistical analysis of this dataset. We also illustrate the advantages of our dataset compared to other current datasets. Through preliminary experiments on this dataset, we analyse the present challenges of utilising deep learning in automated GUI development and find that our dataset can assist the application of some deep learning models to tasks involving automatic GUI development. |
| 2023-07-24 | Evaluating the reliability of automatically generated pedestrian and bicycle crash surrogates | Agnimitra Sengupta et.al. | 2307.13178v1 | null | Vulnerable road users (VRUs), such as pedestrians and bicyclists, are at a higher risk of being involved in crashes with motor vehicles, and crashes involving VRUs also are more likely to result in severe injuries or fatalities. Signalized intersections are a major safety concern for VRUs due to their complex and dynamic nature, highlighting the need to understand how these road users interact with motor vehicles and deploy evidence-based countermeasures to improve safety performance. Crashes involving VRUs are relatively infrequent, making it difficult to understand the underlying contributing factors. An alternative is to identify and use conflicts between VRUs and motorized vehicles as a surrogate for safety performance. Automatically detecting these conflicts using a video-based systems is a crucial step in developing smart infrastructure to enhance VRU safety. The Pennsylvania Department of Transportation conducted a study using video-based event monitoring system to assess VRU and motor vehicle interactions at fifteen signalized intersections across Pennsylvania to improve VRU safety performance. This research builds on that study to assess the reliability of automatically generated surrogates in predicting confirmed conflicts using advanced data-driven models. The surrogate data used for analysis include automatically collectable variables such as vehicular and VRU speeds, movements, post-encroachment time, in addition to manually collected variables like signal states, lighting, and weather conditions. The findings highlight the varying importance of specific surrogates in predicting true conflicts, some being more informative than others. The findings can assist transportation agencies to collect the right types of data to help prioritize infrastructure investments, such as bike lanes and crosswalks, and evaluate their effectiveness. |
| 2023-07-24 | Schema-Driven Actionable Insight Generation and Smart Recommendation | Allmin Susaiyah et.al. | 2307.13176v1 | null | In natural language generation (NLG), insight mining is seen as a data-to-text task, where data is mined for interesting patterns and verbalised into 'insight' statements. An 'over-generate and rank' paradigm is intuitively used to generate such insights. The multidimensionality and subjectivity of this process make it challenging. This paper introduces a schema-driven method to generate actionable insights from data to drive growth and change. It also introduces a technique to rank the insights to align with user interests based on their feedback. We show preliminary qualitative results of the insights generated using our technique and demonstrate its ability to adapt to feedback. |
| 2023-07-24 | A Connection between One-Step Regularization and Critic Regularization in Reinforcement Learning | Benjamin Eysenbach et.al. | 2307.12968v1 | link | As with any machine learning problem with limited data, effective offline RL algorithms require careful regularization to avoid overfitting. One-step methods perform regularization by doing just a single step of policy improvement, while critic regularization methods do many steps of policy improvement with a regularized objective. These methods appear distinct. One-step methods, such as advantage-weighted regression and conditional behavioral cloning, truncate policy iteration after just one step. This ``early stopping'' makes one-step RL simple and stable, but can limit its asymptotic performance. Critic regularization typically requires more compute but has appealing lower-bound guarantees. In this paper, we draw a close connection between these methods: applying a multi-step critic regularization method with a regularization coefficient of 1 yields the same policy as one-step RL. While practical implementations violate our assumptions and critic regularization is typically applied with smaller regularization coefficients, our experiments nevertheless show that our analysis makes accurate, testable predictions about practical offline RL methods (CQL and one-step RL) with commonly-used hyperparameters. Our results that every problem can be solved with a single step of policy improvement, but rather that one-step RL might be competitive with critic regularization on RL problems that demand strong regularization. |
| 2023-07-24 | Rechargeable Li/Cl$_2$ battery down to -80 °C | Peng Liang et.al. | 2307.12947v1 | null | Low temperature rechargeable batteries are important to life in cold climates, polar/deep-sea expeditions and space explorations. Here, we report ~ 3.5 - 4 V rechargeable lithium/chlorine (Li/Cl2) batteries operating down to -80 {\deg}C, employing Li metal negative electrode, a novel CO2 activated porous carbon (KJCO2) as the positive electrode, and a high ionic conductivity (~ 5 to 20 mS cm-1 from -80 {\deg}C to 25 {\deg}C) electrolyte comprised of 1 M aluminum chloride (AlCl3), 0.95 M lithium chloride (LiCl), and 0.05 M lithium bis(fluorosulfonyl)imide (LiFSI) in low melting point (-104.5 {\deg}C) thionyl chloride (SOCl2). Between room-temperature and -80 {\deg}C, the Li/Cl2 battery delivered up to ~ 30,000 - 4,500 mAh g-1 first discharge capacity and a 1,200 - 5,000 mAh g-1 reversible capacity (discharge voltages in ~ 3.5 to 3.1 V) over up to 130 charge-discharge cycles. Mass spectrometry and X-ray photoelectron spectroscopy (XPS) probed Cl2 trapped in the porous carbon upon LiCl electro-oxidation during charging. At lower temperature down to -80 {\deg}C, SCl2/S2Cl2 and Cl2 generated by electro-oxidation in the charging step were trapped in porous KJCO2 carbon, allowing for reversible reduction to afford a high discharge voltage plateau near ~ 4 V with up to ~ 1000 mAh g-1 capacity for SCl2/S2Cl2 reduction and up to ~ 4000 mAh g-1 capacity at ~ 3.1 V plateau for Cl2 reduction. Towards practical use, we made CR2032 Li/Cl2 battery cells to drive digital watches at -40 {\deg}C and light emitting diode at -80 {\deg}C, opening Li/Cl2 secondary batteries for ultra-cold conditions. |
| 2023-07-24 | Economic Analysis of Smart Roadside Infrastructure Sensors for Connected and Automated Mobility | Laurent Kloeker et.al. | 2307.12893v1 | null | Smart roadside infrastructure sensors in the form of intelligent transportation system stations (ITS-Ss) are increasingly deployed worldwide at relevant traffic nodes. The resulting digital twins of the real environment are suitable for developing and validating connected and automated driving functions and for increasing the operational safety of intelligent vehicles by providing ITS-S real-time data. However, ITS-Ss are very costly to establish and operate. The choice of sensor technology also has an impact on the overall costs as well as on the data quality. So far, there is only insufficient knowledge about the concrete expenses that arise with the construction of different ITS-S setups. Within this work, multiple modular infrastructure sensor setups are investigated with the help of a life cycle cost analysis (LCCA). Their economic efficiency, different user requirements and sensor data qualities are considered. Based on the static cost model, a Monte Carlo simulation is performed, to generate a range of possible project costs and to quantify the financial risks of implementing ITS-S projects of different scales. Due to its modularity, the calculation model is suitable for diverse applications and outputs a distinctive evaluation of the underlying cost-benefit ratio of investigated setups. |
| 2023-07-24 | Multi-Shooting Differential Dynamic Programming for Hybrid Systems using Analytical Derivatives | Shubham Singh et.al. | 2307.12606v1 | null | Differential Dynamic Programming (DDP) is a popular technique used to generate motion for dynamic-legged robots in the recent past. However, in most cases, only the first-order partial derivatives of the underlying dynamics are used, resulting in the iLQR approach. Neglecting the second-order terms often slows down the convergence rate compared to full DDP. Multi-Shooting is another popular technique to improve robustness, especially if the dynamics are highly non-linear. In this work, we consider Multi-Shooting DDP for trajectory optimization of a bounding gait for a simplified quadruped model. As the main contribution, we develop Second-Order analytical partial derivatives of the rigid-body contact dynamics, extending our previous results for fixed/floating base models with multi-DoF joints. Finally, we show the benefits of a novel Quasi-Newton method for approximating second-order derivatives of the dynamics, leading to order-of-magnitude speedups in the convergence compared to the full DDP method. |
| 2023-07-24 | Automated Mapping of Adaptive App GUIs from Phones to TVs | Han Hu et.al. | 2307.12522v1 | null | With the increasing interconnection of smart devices, users often desire to adopt the same app on quite different devices for identical tasks, such as watching the same movies on both their smartphones and TV. However, the significant differences in screen size, aspect ratio, and interaction styles make it challenging to adapt Graphical User Interfaces (GUIs) across these devices. Although there are millions of apps available on Google Play, only a few thousand are designed to support smart TV displays. Existing techniques to map a mobile app GUI to a TV either adopt a responsive design, which struggles to bridge the substantial gap between phone and TV or use mirror apps for improved video display, which requires hardware support and extra engineering efforts. Instead of developing another app for supporting TVs, we propose a semi-automated approach to generate corresponding adaptive TV GUIs, given the phone GUIs as the input. Based on our empirical study of GUI pairs for TV and phone in existing apps, we synthesize a list of rules for grouping and classifying phone GUIs, converting them to TV GUIs, and generating dynamic TV layouts and source code for the TV display. Our tool is not only beneficial to developers but also to GUI designers, who can further customize the generated GUIs for their TV app development. An evaluation and user study demonstrate the accuracy of our generated GUIs and the usefulness of our tool. |
| 2023-07-23 | An Efficient Authentication Protocol for Smart Grid Communication Based on On-Chip-Error-Correcting Physical Unclonable Function | Masoud Kaveh et.al. | 2307.12374v1 | null | Security has become a main concern for the smart grid to move from research and development to industry. The concept of security has usually referred to resistance to threats by an active or passive attacker. However, since smart meters (SMs) are often placed in unprotected areas, physical security has become one of the important security goals in the smart grid. Physical unclonable functions (PUFs) have been largely utilized for ensuring physical security in recent years, though their reliability has remained a major problem to be practically used in cryptographic applications. Although fuzzy extractors have been considered as a solution to solve the reliability problem of PUFs, they put a considerable computational cost to the resource-constrained SMs. To that end, we first propose an on-chip-error-correcting (OCEC) PUF that efficiently generates stable digits for the authentication process. Afterward, we introduce a lightweight authentication protocol between the SMs and neighborhood gateway (NG) based on the proposed PUF. The provable security analysis shows that not only the proposed protocol can stand secure in the Canetti-Krawczyk (CK) adversary model but also provides additional security features. Also, the performance evaluation demonstrates the significant improvement of the proposed scheme in comparison with the state-of-the-art. |
| 2023-07-23 | Semantic Communication-Empowered Traffic Management using Vehicle Count Prediction | Sachin Kadam et.al. | 2307.12254v1 | null | Vehicle count prediction is an important aspect of smart city traffic management. Most major roads are monitored by cameras with computing and transmitting capabilities. These cameras provide data to the central traffic controller (CTC), which is in charge of traffic control management. In this paper, we propose a joint CNN-LSTM-based semantic communication (SemCom) model in which the semantic encoder of a camera extracts the relevant semantics from raw images. The encoded semantics are then sent to the CTC by the transmitter in the form of symbols. The semantic decoder of the CTC predicts the vehicle count on each road based on the sequence of received symbols and develops a traffic management strategy accordingly. An optimization problem to improve the quality of experience (QoE) is introduced and numerically solved, taking into account constraints such as vehicle user safety, transmit power of camera devices, vehicle count prediction accuracy, and semantic entropy. Using numerical results, we show that the proposed SemCom model reduces overhead by |
| 2023-07-23 | LiveRetro: Visual Analytics for Strategic Retrospect in Livestream E-Commerce | Yuchen Wu et.al. | 2307.12213v1 | null | Livestream e-commerce integrates live streaming and online shopping, allowing viewers to make purchases while watching. However, effective marketing strategies remain a challenge due to limited empirical research and subjective biases from the absence of quantitative data. Current tools fail to capture the interdependence between live performances and feedback. This study identified computational features, formulated design requirements, and developed LiveRetro, an interactive visual analytics system. It enables comprehensive retrospective analysis of livestream e-commerce for streamers, viewers, and merchandise. LiveRetro employs enhanced visualization and time-series forecasting models to align performance features and feedback, identifying influences at channel, merchandise, feature, and segment levels. Through case studies and expert interviews, the system provides deep insights into the relationship between live performance and streaming statistics, enabling efficient strategic analysis from multiple perspectives. |
| 2023-07-23 | Content Censorship in the InterPlanetary File System | Srivatsan Sridhar et.al. | 2307.12212v1 | null | The InterPlanetary File System (IPFS) is currently the largest decentralized storage solution in operation, with thousands of active participants and millions of daily content transfers. IPFS is used as remote data storage for numerous blockchain-based smart contracts, Non-Fungible Tokens (NFT), and decentralized applications. We present a content censorship attack that can be executed with minimal effort and cost, and that prevents the retrieval of any chosen content in the IPFS network. The attack exploits a conceptual issue in a core component of IPFS, the Kademlia Distributed Hash Table (DHT), which is used to resolve content IDs to peer addresses. We provide efficient detection and mitigation mechanisms for this vulnerability. Our mechanisms achieve a 99.6% detection rate and mitigate 100% of the detected attacks with minimal signaling and computational overhead. We followed responsible disclosure procedures, and our countermeasures are scheduled for deployment in the future versions of IPFS. |
| 2023-07-22 | AI on the Road: A Comprehensive Analysis of Traffic Accidents and Accident Detection System in Smart Cities | Victor Adewopo et.al. | 2307.12128v1 | null | Accident detection and traffic analysis is a critical component of smart city and autonomous transportation systems that can reduce accident frequency, severity and improve overall traffic management. This paper presents a comprehensive analysis of traffic accidents in different regions across the United States using data from the National Highway Traffic Safety Administration (NHTSA) Crash Report Sampling System (CRSS). To address the challenges of accident detection and traffic analysis, this paper proposes a framework that uses traffic surveillance cameras and action recognition systems to detect and respond to traffic accidents spontaneously. Integrating the proposed framework with emergency services will harness the power of traffic cameras and machine learning algorithms to create an efficient solution for responding to traffic accidents and reducing human errors. Advanced intelligence technologies, such as the proposed accident detection systems in smart cities, will improve traffic management and traffic accident severity. Overall, this study provides valuable insights into traffic accidents in the US and presents a practical solution to enhance the safety and efficiency of transportation systems. |
| 2023-07-22 | Blockchain-based Cloud Data Deduplication Scheme with Fair Incentives | Mallikarjun Reddy Dorsala et.al. | 2307.12052v1 | null | With the rapid development of cloud computing, vast amounts of duplicated data are being uploaded to the cloud, wasting storage resources. Deduplication (dedup) is an efficient solution to save storage costs of cloud storage providers (CSPs) by storing only one copy of the uploaded data. However, cloud users do not benefit directly from dedup and may be reluctant to dedup their data. To motivate the cloud users towards dedup, CSPs offer incentives on storage fees. The problems with the existing dedup schemes are that they do not consider: (1) correctness - the incentive offered to a cloud user should be computed correctly without any prejudice. (2) fairness - the cloud user receives the file link and access rights of the uploaded data if and only if the CSP receives the storage fee. Meeting these requirements without a trusted party is non-trivial, and most of the existing dedup schemes do not apply. Another drawback is that most of the existing schemes emphasize incentives to cloud users but failed to provide a reliable incentive mechanism. As public Blockchain networks emulate the properties of trusted parties, in this paper, we propose a new Blockchain-based dedup scheme to meet the above requirements. In our scheme, a smart contract computes the incentives on storage fee, and the fairness rules are encoded into the smart contract for facilitating fair payments between the CSPs and cloud users. We prove the correctness and fairness of the proposed scheme. We also design a new incentive mechanism and show that the scheme is individually rational and incentive compatible. Furthermore, we conduct experiments by implementing the designed smart contract on Ethereum local Blockchain network and list the transactional and financial costs of interacting with the designed smart contract. |
| 2023-07-22 | Two-stream Multi-level Dynamic Point Transformer for Two-person Interaction Recognition | Yao Liu et.al. | 2307.11973v1 | null | As a fundamental aspect of human life, two-person interactions contain meaningful information about people's activities, relationships, and social settings. Human action recognition serves as the foundation for many smart applications, with a strong focus on personal privacy. However, recognizing two-person interactions poses more challenges due to increased body occlusion and overlap compared to single-person actions. In this paper, we propose a point cloud-based network named Two-stream Multi-level Dynamic Point Transformer for two-person interaction recognition. Our model addresses the challenge of recognizing two-person interactions by incorporating local-region spatial information, appearance information, and motion information. To achieve this, we introduce a designed frame selection method named Interval Frame Sampling (IFS), which efficiently samples frames from videos, capturing more discriminative information in a relatively short processing time. Subsequently, a frame features learning module and a two-stream multi-level feature aggregation module extract global and partial features from the sampled frames, effectively representing the local-region spatial information, appearance information, and motion information related to the interactions. Finally, we apply a transformer to perform self-attention on the learned features for the final classification. Extensive experiments are conducted on two large-scale datasets, the interaction subsets of NTU RGB+D 60 and NTU RGB+D 120. The results show that our network outperforms state-of-the-art approaches across all standard evaluation settings. |
| 2023-07-21 | Building3D: An Urban-Scale Dataset and Benchmarks for Learning Roof Structures from Point Clouds | Ruisheng Wang et.al. | 2307.11914v1 | null | Urban modeling from LiDAR point clouds is an important topic in computer vision, computer graphics, photogrammetry and remote sensing. 3D city models have found a wide range of applications in smart cities, autonomous navigation, urban planning and mapping etc. However, existing datasets for 3D modeling mainly focus on common objects such as furniture or cars. Lack of building datasets has become a major obstacle for applying deep learning technology to specific domains such as urban modeling. In this paper, we present a urban-scale dataset consisting of more than 160 thousands buildings along with corresponding point clouds, mesh and wire-frame models, covering 16 cities in Estonia about 998 Km2. We extensively evaluate performance of state-of-the-art algorithms including handcrafted and deep feature based methods. Experimental results indicate that Building3D has challenges of high intra-class variance, data imbalance and large-scale noises. The Building3D is the first and largest urban-scale building modeling benchmark, allowing a comparison of supervised and self-supervised learning methods. We believe that our Building3D will facilitate future research on urban modeling, aerial path planning, mesh simplification, and semantic/part segmentation etc. |
| 2023-07-21 | Selecting the motion ground truth for loose-fitting wearables: benchmarking optical MoCap methods | Lala Shakti Swarup Ray et.al. | 2307.11881v2 | link | To help smart wearable researchers choose the optimal ground truth methods for motion capturing (MoCap) for all types of loose garments, we present a benchmark, DrapeMoCapBench (DMCB), specifically designed to evaluate the performance of optical marker-based and marker-less MoCap. High-cost marker-based MoCap systems are well-known as precise golden standards. However, a less well-known caveat is that they require skin-tight fitting markers on bony areas to ensure the specified precision, making them questionable for loose garments. On the other hand, marker-less MoCap methods powered by computer vision models have matured over the years, which have meager costs as smartphone cameras would suffice. To this end, DMCB uses large real-world recorded MoCap datasets to perform parallel 3D physics simulations with a wide range of diversities: six levels of drape from skin-tight to extremely draped garments, three levels of motions and six body type - gender combinations to benchmark state-of-the-art optical marker-based and marker-less MoCap methods to identify the best-performing method in different scenarios. In assessing the performance of marker-based and low-cost marker-less MoCap for casual loose garments both approaches exhibit significant performance loss (>10cm), but for everyday activities involving basic and fast motions, marker-less MoCap slightly outperforms marker-based MoCap, making it a favorable and cost-effective choice for wearable studies. |
| 2023-07-21 | Smart Machine Vision for Universal Spatial Mode Reconstruction | José D. Huerta-Morales et.al. | 2307.11841v1 | link | Structured light beams, in particular those carrying orbital angular momentum (OAM), have gained a lot of attention due to their potential for enlarging the transmission capabilities of communication systems. However, the use of OAM-carrying light in communications faces two major problems, namely distortions introduced during propagation in disordered media, such as the atmosphere or optical fibers, and the large divergence that high-order OAM modes experience. While the use of non-orthogonal modes may offer a way to circumvent the divergence of high-order OAM fields, artificial intelligence (AI) algorithms have shown promise for solving the mode-distortion issue. Unfortunately, current AI-based algorithms make use of large-amount data-handling protocols that generally lead to large processing time and high power consumption. Here we show that a low-power, low-cost image sensor can itself act as an artificial neural network that simultaneously detects and reconstructs distorted OAM-carrying beams. We demonstrate the capabilities of our device by reconstructing (with a 95$%$ efficiency) individual Vortex, Laguerre-Gaussian (LG) and Bessel modes, as well as hybrid (non-orthogonal) coherent superpositions of such modes. Our work provides a potentially useful basis for the development of low-power-consumption, light-based communication devices. |
| 2023-07-21 | Zero-touch realization of Pervasive Artificial Intelligence-as-a-service in 6G networks | Emna Baccour et.al. | 2307.11468v1 | null | The vision of the upcoming 6G technologies, characterized by ultra-dense network, low latency, and fast data rate is to support Pervasive AI (PAI) using zero-touch solutions enabling self-X (e.g., self-configuration, self-monitoring, and self-healing) services. However, the research on 6G is still in its infancy, and only the first steps have been taken to conceptualize its design, investigate its implementation, and plan for use cases. Toward this end, academia and industry communities have gradually shifted from theoretical studies of AI distribution to real-world deployment and standardization. Still, designing an end-to-end framework that systematizes the AI distribution by allowing easier access to the service using a third-party application assisted by a zero-touch service provisioning has not been well explored. In this context, we introduce a novel platform architecture to deploy a zero-touch PAI-as-a-Service (PAIaaS) in 6G networks supported by a blockchain-based smart system. This platform aims to standardize the pervasive AI at all levels of the architecture and unify the interfaces in order to facilitate the service deployment across application and infrastructure domains, relieve the users worries about cost, security, and resource allocation, and at the same time, respect the 6G stringent performance requirements. As a proof of concept, we present a Federated Learning-as-a-service use case where we evaluate the ability of our proposed system to self-optimize and self-adapt to the dynamics of 6G networks in addition to minimizing the users' perceived costs. |
| 2023-07-21 | Large Language Model-based System to Provide Immediate Feedback to Students in Flipped Classroom Preparation Learning | Shintaro Uchiyama et.al. | 2307.11388v1 | null | This paper proposes a system that uses large language models to provide immediate feedback to students in flipped classroom preparation learning. This study aimed to solve challenges in the flipped classroom model, such as ensuring that students are emotionally engaged and motivated to learn. Students often have questions about the content of lecture videos in the preparation of flipped classrooms, but it is difficult for teachers to answer them immediately. The proposed system was developed using the ChatGPT API on a video-watching support system for preparation learning that is being used in real practice. Answers from ChatGPT often do not align with the context of the student's question. Therefore, this paper also proposes a method to align the answer with the context. This paper also proposes a method to collect the teacher's answers to the students' questions and use them as additional guides for the students. This paper discusses the design and implementation of the proposed system. |
| Publish Date | Title | Authors | Code | Abstract | |
|---|---|---|---|---|---|
| 2023-07-27 | Asymptotic approach to singular solutions for the CR Yamabe equation, and a conjecture by H. Brezis and L. A. Peletier in the Heisenberg group | Giampiero Palatucci et.al. | 2307.14933v1 | null | We investigate some effects of the lack of compactness in the critical Sobolev embedding by proving that a famous conjecture of Brezis & Peletier (Essays in honor of Ennio De Giorgi -- Progr. Differ. Equ. Appl. 1989) does still hold in the Heisenberg framework: optimal functions for a natural subcritical approximations of the Sobolev quotient concentrate energy at one point which can be localized via the Green function associated to the involved domain and in clear accordance with the underlying sub-Riemannian geometry -- and consequently a new suitable definition of domains geometrical regular near their characteristic set is given. In order to achieve the aforementioned result, we need to combine proper estimates and tools to attack the related CR Yamabe equation (Jerison & Lee, J. Diff. Geom. 1987) with novel feasible ingredients in PDEs and Calculus of Variations which also aim to constitute general independent results in the Heisenberg framework, as e.g. a fine asymptotic control of the optimal functions via the Jerison & Lee extremals realizing the equality in the critical Sobolev inequality (J. Amer. Math. Soc. 1988). |
| 2023-07-27 | Pre-Schwarzian and Schwarzian norm estimates for harmonic functions with fixed analytic part | Md Firoz Ali et.al. | 2307.14793v1 | null | In the present article, we discuss about the estimate of the pre-Schwarzian and Schwarzian norms for locally univalent harmonic functions |
| 2023-07-27 | Quinpi: Integrating stiff hyperbolic systems with implicit high order finite volume schemes | Gabriella Puppo et.al. | 2307.14685v1 | null | Many interesting physical problems described by systems of hyperbolic conservation laws are stiff, and thus impose a very small time-step because of the restrictive CFL stability condition. In this case, one can exploit the superior stability properties of implicit time integration which allows to choose the time-step only from accuracy requirements, and thus avoid the use of small time-steps. We discuss an efficient framework to devise high order implicit schemes for stiff hyperbolic systems without tailoring it to a specific problem. The nonlinearity of high order schemes, due to space- and time-limiting procedures which control nonphysical oscillations, makes the implicit time integration difficult, e.g.~because the discrete system is nonlinear also on linear problems. This nonlinearity of the scheme is circumvented as proposed in (Puppo et al., Comm.~Appl. |
| 2023-07-27 | How to Train Your YouTube Recommender | Alexander Liu et.al. | 2307.14551v1 | null | YouTube provides features for users to indicate disinterest when presented with unwanted recommendations, such as the Not interested'' and Don't recommend channel'' buttons. These buttons are purported to allow the user to correct mistakes'' made by the recommendation system. Yet, relatively little is known about the empirical efficacy of these buttons. Neither is much known about users' awareness of and confidence in them. To address these gaps, we simulated YouTube users with sock puppet agents. Each agent first executed a stain phase'', where it watched many videos of one assigned topic; then it executed a scrub phase'', where it tried to remove recommendations of the assigned topic. Each agent repeatedly applied a single scrubbing strategy, which included disliking previously-watched videos or deleting them from watch history, as well as clicking the not interested'' or don\'t recommend channel'' button on newly-recommended videos. Overall, we found that the stain phase significantly increased the fraction of the recommended videos on the user\'s homepage dedicated to the assigned topic. For the scrub phase, using the Not interested'' button worked best, significantly reducing such recommendations in all topics tested, on average removing 88% of them. Neither the stain phase nor the scrub phase, however, had much effect on videopage recommendations (those given to users while they watch a video). We also ran a survey ( |
| 2023-07-26 | Measuring 3D tree imbalance of plant models using graph-theoretical approaches | Sophie J. Kersting et.al. | 2307.14537v1 | null | Imbalance in the 3D structure of plants can be an important indicator of insufficient light or nutrient supply, as well as excessive wind, (formerly present) physical barriers, neighbor or storm damage. It can also be a simple means to detect certain illnesses, since some diseases like the apple proliferation disease, an infection with the barley yellow dwarf virus or plant canker can cause abnormal growth, like \enquote{witches' brooms} or burls, resulting in a deviating 3D plant architecture. However, quantifying imbalance of plant growth is not an easy task, and it requires a mathematically sound 3D model of plants to which imbalance indices can be applied. Current models of plants are often based on stacked cylinders or voxel matrices and do not allow for measuring the degree of 3D imbalance in the branching structure of the whole plant. On the other hand, various imbalance indices are readily available for so-called graph-theoretical trees and are frequently used in areas like phylogenetics and computer science. While only some basic ideas of these indices can be transferred to the 3D setting, graph-theoretical trees are a logical foundation for 3D plant models that allow for elegant and natural imbalance measures. In this manuscript, our aim is thus threefold: We first present a new graph-theoretical 3D model of plants and discuss desirable properties of imbalance measures in the 3D setting. We then introduce and analyze eight different imbalance indices and their properties. Thirdly, we illustrate all our findings using a data set of 63 bush beans. Moreover, we implemented all our indices in the publicly available \textsf{R}-software package \textsf{treeDbalance} accompanying this manuscript. |
| 2023-07-26 | Generating functions of non-backtracking walks on weighted digraphs: radius of convergence and Ihara's theorem | Vanni Noferini et.al. | 2307.14200v1 | null | It is known that the generating function associated with the enumeration of non-backtracking walks on finite graphs is a rational matrix-valued function of the parameter; such function is also closely related to graph-theoretical results such as Ihara's theorem and the zeta function on graphs. In [P. Grindrod, D. J. Higham, V. Noferini, The deformed graph Laplacian and its application to network centrality analysis, SIAM J. Matrix Anal. Appl. 39(1), 310--341, 2018], the radius of convergence of the generating function was studied for simple (i.e., undirected, unweighted and with no loops) graphs, and shown to depend on the number of cycles in the graph. In this paper, we use technologies from the theory of polynomial and rational matrices to greatly extend these results by studying the radius of convergence of the corresponding generating function for general, possibly directed and/or weighted, graphs. We give an analogous characterization of the radius of convergence for directed unweighted graphs, showing that it depends on the number of cycles in the undirectization of the graph. For weighted graphs, we provide for the first time an exact formula for the radius of convergence, improving a previous result that exhibited a lower bound. Finally, we consider also backtracking-downweighted walks on unweighted digraphs, and we prove a version of Ihara's theorem in that case. |
| 2023-07-26 | An Antithetic Multilevel Monte Carlo-Milstein Scheme for Stochastic Partial Differential Equations | Abdul-Lateef Haji-Al et.al. | 2307.14169v1 | null | We present a novel multilevel Monte Carlo approach for estimating quantities of interest for stochastic partial differential equations (SPDEs). Drawing inspiration from [Giles and Szpruch: Antithetic multilevel Monte Carlo estimation for multi-dimensional SDEs without L'evy area simulation, Annals of Appl. Prob., 2014], we extend the antithetic Milstein scheme for finite-dimensional stochastic differential equations to Hilbert space-valued SPDEs. Our method has the advantages of both Euler and Milstein discretizations, as it is easy to implement and does not involve intractable L'evy area terms. Moreover, the antithetic correction in our method leads to the same variance decay in a MLMC algorithm as the standard Milstein method, resulting in significantly lower computational complexity than a corresponding MLMC Euler scheme. Our approach is applicable to a broader range of non-linear diffusion coefficients and does not require any commutative properties. The key component of our MLMC algorithm is a truncated Milstein-type time stepping scheme for SPDEs, which accelerates the rate of variance decay in the MLMC method when combined with an antithetic coupling on the fine scales. We combine the truncated Milstein scheme with appropriate spatial discretizations and noise approximations on all scales to obtain a fully discrete scheme and show that the antithetic coupling does not introduce an additional bias. |
| 2023-07-26 | Energy Spectrum Analysis on a Red Blood Cell Model | Tetsuya Yamamoto et.al. | 2307.14029v1 | null | It is important to understand the dynamics of red blood cells (RBCs) in blood flow. This requires the formulation of coarse-grained RBC models that reproduce the hydrodynamic properties of blood accurately. One of the models that successfully reproduce the rheology and morphology of blood has been proposed by Fedosov et al. [D. A. Fedosov, B. Caswell, and G. E. Karniadakis, Comput. Methods Appl. Mech. Eng., Vol. 199, 1937-1948 (2010)]. The proposed RBC model contains several parameters whose values are determined either by various experiments or physical requirements. In this study, we developed a new method of determining the parameter values precisely from the fluctuations of the RBC membrane. Specifically, we studied the relationship between the spectra of the fluctuations and model parameters. Characteristic peaks were observed in the spectra, whose peak frequencies were dependent on the parameter values. In addition, we investigated the spectra of the radius of gyration. We identified the peaks originating from the spring potential and the volume-conserving potential appearing in the spectra. These results lead to the precise experimental determination of the parameters used in the RBC model. |
| 2023-07-25 | Fast Fabrication of WS2/Bi2Se3 Heterostructures for High Performance Photodetection | Fan Li et.al. | 2307.13852v1 | null | Two-dimensional (2D) material heterostructures have attracted considerable attention owing to their interesting and novel physical properties, which expand the possibilities for future optoelectronic, photovoltaic, and nanoelectronic applications. A portable, fast, and deterministic transfer technique is highly needed for the fabrication of heterostructures. Herein, we report a fast half wet poly(dimethylsiloxane) (PDMS) transfer process utilizing the change of adhesion energy with the help of micron-sized water droplets. Using this method, a vertical stacking of the WS2/Bi2Se3 heterostructure with a straddling band configuration is successfully assembled on a fluorophlogopite substrate. Thanks to the complementary band gaps and high efficiency of interfacial charge transfer, the photodetector based on the heterostructure exhibits a superior responsivity of 109.9 A/W for a visible incident light at 473 nm and 26.7 A/W for a 1064 nm near-infrared illumination. Such high photoresponsivity of the heterostructure demonstrates that our transfer method not only owns time efficiency but also ensures high quality of the heterointerface. Our study may open new pathways to the fast and massive fabrication of various vertical 2D heterostructures for applications in twistronics/valleytronics and other band engineering devices. |
| 2023-07-25 | Insights into Cognitive Engagement: Comparing the Effectiveness of Game-Based and Video-Based Learning | Shayla Sharmin et.al. | 2307.13637v1 | null | The analysis of brain signals holds considerable importance in enhancing our comprehension of diverse learning techniques and cognitive mechanisms. Game-based learning is increasingly being recognized for its interactive and engaging educational approach. A pilot study of twelve participants divided into experimental and control groups was conducted to understand its effects on cognitive processes. Both groups were provided with the same contents regarding the basic structure of the graph. The participants in the experimental group engaged in a quiz-based game, while those in the control group watched a pre-recorded video. Functional Near-Infrared Spectroscopy (fNIRS) was employed to acquire cerebral signals, and a series of pre and post-tests were administered. The findings of our study indicate that the group engaged in the game activity displayed elevated levels of oxygenated hemoglobin compared to the group involved in watching videos. Conversely, the deoxygenated hemoglobin levels remained relatively consistent across both groups throughout the learning process. The aforementioned findings suggest that the use of game-based learning has a substantial influence on cognitive processes. Furthermore, it is evident that both the game and video groups exhibited higher neural activity in the Lateral Prefrontal cortex (PFC). The oxygenated hemoglobin ratio demonstrates that the game group had 2.33 times more neural processing in the Lateral PFC than the video group. This data is further supported by the knowledge gain analysis, which indicates that the game-based approach resulted in a 47.74% higher knowledge gain than the video group, as calculated from the difference in pre-and post-test scores. |
| 2023-07-25 | Isogeometric analysis of insoluble surfactant spreading on a thin film | David Medina et.al. | 2307.13605v1 | null | In this paper we tackle the problem of surfactant spreading on a thin liquid film in the framework of isogeometric analysis. We consider a mathematical model that describes this phenomenon as an initial boundary value problem (IBVP) that includes two coupled fourth order partial differential equations (PDEs), one for the film height and one for the surfactant concentration. In order to solve this problem numerically, it is customary to transform it into a mixed problem that includes at most second order PDEs. However, the higher-order continuity of the approximation functions in Isogeometric Analysis (IGA) allows us to deal with the weak form of the fourth order PDEs directly, without the need of resorting to mixed methods. We demonstrate numerically that the IGA solution is able to reproduce results obtained before with mixed approaches. Complex phenomena such as Marangoni-driven fingering instabilities triggered by perturbations are easily captured. |
| 2023-07-25 | Local density of states above a disk -- geometrical vs. thermal boundary conditions | Svend-Age Biehs et.al. | 2307.13438v1 | null | We analytically calculate the contribution to the local density of states due to thermal sources in a disk-like patch within the framework of fluctuational electrodynamics. We further introduce a wavevector cutoff method to approximate this contribution. We compare the results obtained with the source and cutoff method with the numerical exact LDOS above a metal disk attained by SCUFF-EM calculations. By this comparison we highlight the difference and resemblance of thermal and geometrical boundary conditions which are both relevant for near-field scanning microscope measurements. Finally, we give an outlook to general lateral temperature profiles and compare it with surface profiles. |
| 2023-07-25 | A Pairwise Dataset for GUI Conversion and Retrieval between Android Phones and Tablets | Han Hu et.al. | 2307.13225v1 | null | With the popularity of smartphones and tablets, users have become accustomed to using different devices for different tasks, such as using their phones to play games and tablets to watch movies. To conquer the market, one app is often available on both smartphones and tablets. However, although one app has similar graphic user interfaces (GUIs) and functionalities on phone and tablet, current app developers typically start from scratch when developing a tablet-compatible version of their app, which drives up development costs and wastes existing design resources. Researchers are attempting to employ deep learning in automated GUIs development to enhance developers' productivity. Deep learning models rely heavily on high-quality datasets. There are currently several publicly accessible GUI page datasets for phones, but none for pairwise GUIs between phones and tablets. This poses a significant barrier to the employment of deep learning in automated GUI development. In this paper, we collect and make public the Papt dataset, which is a pairwise dataset for GUI conversion and retrieval between Android phones and tablets. The dataset contains 10,035 phone-tablet GUI page pairs from 5,593 phone-tablet app pairs. We illustrate the approaches of collecting pairwise data and statistical analysis of this dataset. We also illustrate the advantages of our dataset compared to other current datasets. Through preliminary experiments on this dataset, we analyse the present challenges of utilising deep learning in automated GUI development and find that our dataset can assist the application of some deep learning models to tasks involving automatic GUI development. |
| 2023-07-24 | A Connection between One-Step Regularization and Critic Regularization in Reinforcement Learning | Benjamin Eysenbach et.al. | 2307.12968v1 | link | As with any machine learning problem with limited data, effective offline RL algorithms require careful regularization to avoid overfitting. One-step methods perform regularization by doing just a single step of policy improvement, while critic regularization methods do many steps of policy improvement with a regularized objective. These methods appear distinct. One-step methods, such as advantage-weighted regression and conditional behavioral cloning, truncate policy iteration after just one step. This ``early stopping'' makes one-step RL simple and stable, but can limit its asymptotic performance. Critic regularization typically requires more compute but has appealing lower-bound guarantees. In this paper, we draw a close connection between these methods: applying a multi-step critic regularization method with a regularization coefficient of 1 yields the same policy as one-step RL. While practical implementations violate our assumptions and critic regularization is typically applied with smaller regularization coefficients, our experiments nevertheless show that our analysis makes accurate, testable predictions about practical offline RL methods (CQL and one-step RL) with commonly-used hyperparameters. Our results that every problem can be solved with a single step of policy improvement, but rather that one-step RL might be competitive with critic regularization on RL problems that demand strong regularization. |
| 2023-07-24 | Rechargeable Li/Cl$_2$ battery down to -80 °C | Peng Liang et.al. | 2307.12947v1 | null | Low temperature rechargeable batteries are important to life in cold climates, polar/deep-sea expeditions and space explorations. Here, we report ~ 3.5 - 4 V rechargeable lithium/chlorine (Li/Cl2) batteries operating down to -80 {\deg}C, employing Li metal negative electrode, a novel CO2 activated porous carbon (KJCO2) as the positive electrode, and a high ionic conductivity (~ 5 to 20 mS cm-1 from -80 {\deg}C to 25 {\deg}C) electrolyte comprised of 1 M aluminum chloride (AlCl3), 0.95 M lithium chloride (LiCl), and 0.05 M lithium bis(fluorosulfonyl)imide (LiFSI) in low melting point (-104.5 {\deg}C) thionyl chloride (SOCl2). Between room-temperature and -80 {\deg}C, the Li/Cl2 battery delivered up to ~ 30,000 - 4,500 mAh g-1 first discharge capacity and a 1,200 - 5,000 mAh g-1 reversible capacity (discharge voltages in ~ 3.5 to 3.1 V) over up to 130 charge-discharge cycles. Mass spectrometry and X-ray photoelectron spectroscopy (XPS) probed Cl2 trapped in the porous carbon upon LiCl electro-oxidation during charging. At lower temperature down to -80 {\deg}C, SCl2/S2Cl2 and Cl2 generated by electro-oxidation in the charging step were trapped in porous KJCO2 carbon, allowing for reversible reduction to afford a high discharge voltage plateau near ~ 4 V with up to ~ 1000 mAh g-1 capacity for SCl2/S2Cl2 reduction and up to ~ 4000 mAh g-1 capacity at ~ 3.1 V plateau for Cl2 reduction. Towards practical use, we made CR2032 Li/Cl2 battery cells to drive digital watches at -40 {\deg}C and light emitting diode at -80 {\deg}C, opening Li/Cl2 secondary batteries for ultra-cold conditions. |
| 2023-07-24 | Scattered trinomials of |
Daniele Bartoli et.al. | 2307.12829v1 | null | In recent years, several families of scattered polynomials have been investigated in the literature. However, most of them only exist in odd characteristic. In [B. Csajb'ok, G. Marino and F. Zullo: New maximum scattered linear sets of the projective line, Finite Fields Appl. 54 (2018), 133-150; G. Marino, M. Montanucci and F. Zullo: MRD-codes arising from the trinomial $x^q+x^{q^3}+cx^{q^5}\in\mathbb{F}{q^6}[x]$, Linear Algebra Appl. 591 (2020), 99-114], the authors proved that the trinomial $f_c(X)=X^{q}+X^{q^{3}}+cX^{q^{5}}$ of $\mathbb{F}{q^6}[X]$ is scattered under the assumptions that |
| 2023-07-24 | Multi-Shooting Differential Dynamic Programming for Hybrid Systems using Analytical Derivatives | Shubham Singh et.al. | 2307.12606v1 | null | Differential Dynamic Programming (DDP) is a popular technique used to generate motion for dynamic-legged robots in the recent past. However, in most cases, only the first-order partial derivatives of the underlying dynamics are used, resulting in the iLQR approach. Neglecting the second-order terms often slows down the convergence rate compared to full DDP. Multi-Shooting is another popular technique to improve robustness, especially if the dynamics are highly non-linear. In this work, we consider Multi-Shooting DDP for trajectory optimization of a bounding gait for a simplified quadruped model. As the main contribution, we develop Second-Order analytical partial derivatives of the rigid-body contact dynamics, extending our previous results for fixed/floating base models with multi-DoF joints. Finally, we show the benefits of a novel Quasi-Newton method for approximating second-order derivatives of the dynamics, leading to order-of-magnitude speedups in the convergence compared to the full DDP method. |
| 2023-07-24 | Automated Mapping of Adaptive App GUIs from Phones to TVs | Han Hu et.al. | 2307.12522v1 | null | With the increasing interconnection of smart devices, users often desire to adopt the same app on quite different devices for identical tasks, such as watching the same movies on both their smartphones and TV. However, the significant differences in screen size, aspect ratio, and interaction styles make it challenging to adapt Graphical User Interfaces (GUIs) across these devices. Although there are millions of apps available on Google Play, only a few thousand are designed to support smart TV displays. Existing techniques to map a mobile app GUI to a TV either adopt a responsive design, which struggles to bridge the substantial gap between phone and TV or use mirror apps for improved video display, which requires hardware support and extra engineering efforts. Instead of developing another app for supporting TVs, we propose a semi-automated approach to generate corresponding adaptive TV GUIs, given the phone GUIs as the input. Based on our empirical study of GUI pairs for TV and phone in existing apps, we synthesize a list of rules for grouping and classifying phone GUIs, converting them to TV GUIs, and generating dynamic TV layouts and source code for the TV display. Our tool is not only beneficial to developers but also to GUI designers, who can further customize the generated GUIs for their TV app development. An evaluation and user study demonstrate the accuracy of our generated GUIs and the usefulness of our tool. |
| 2023-07-23 | LiveRetro: Visual Analytics for Strategic Retrospect in Livestream E-Commerce | Yuchen Wu et.al. | 2307.12213v1 | null | Livestream e-commerce integrates live streaming and online shopping, allowing viewers to make purchases while watching. However, effective marketing strategies remain a challenge due to limited empirical research and subjective biases from the absence of quantitative data. Current tools fail to capture the interdependence between live performances and feedback. This study identified computational features, formulated design requirements, and developed LiveRetro, an interactive visual analytics system. It enables comprehensive retrospective analysis of livestream e-commerce for streamers, viewers, and merchandise. LiveRetro employs enhanced visualization and time-series forecasting models to align performance features and feedback, identifying influences at channel, merchandise, feature, and segment levels. Through case studies and expert interviews, the system provides deep insights into the relationship between live performance and streaming statistics, enabling efficient strategic analysis from multiple perspectives. |
| 2023-07-21 | Large Language Model-based System to Provide Immediate Feedback to Students in Flipped Classroom Preparation Learning | Shintaro Uchiyama et.al. | 2307.11388v1 | null | This paper proposes a system that uses large language models to provide immediate feedback to students in flipped classroom preparation learning. This study aimed to solve challenges in the flipped classroom model, such as ensuring that students are emotionally engaged and motivated to learn. Students often have questions about the content of lecture videos in the preparation of flipped classrooms, but it is difficult for teachers to answer them immediately. The proposed system was developed using the ChatGPT API on a video-watching support system for preparation learning that is being used in real practice. Answers from ChatGPT often do not align with the context of the student's question. Therefore, this paper also proposes a method to align the answer with the context. This paper also proposes a method to collect the teacher's answers to the students' questions and use them as additional guides for the students. This paper discusses the design and implementation of the proposed system. |
| 2023-07-21 | Fused Spectatorship: Designing Bodily Experiences Where Spectators Become Players | Rakesh Patibanda et.al. | 2307.11297v1 | null | Spectating digital games can be exciting. However, due to its vicarious nature, spectators often wish to engage in the gameplay beyond just watching and cheering. To blur the boundaries between spectators and players, we propose a novel approach called ''Fused Spectatorship'', where spectators watch their hands play games by loaning bodily control to a computational Electrical Muscle Stimulation (EMS) system. To showcase this concept, we designed three games where spectators loan control over both their hands to the EMS system and watch them play these competitive and collaborative games. A study with 12 participants suggested that participants could not distinguish if they were watching their hands play, or if they were playing the games themselves. We used our results to articulate four spectator experience themes and four fused spectator types, the behaviours they elicited and offer one design consideration to support each of these behaviours. We also discuss the ethical design considerations of our approach to help game designers create future fused spectatorship experiences. |
| 2023-07-20 | Underwater 3D positioning on smart devices | Tuochao Chen et.al. | 2307.11263v1 | null | The emergence of water-proof mobile and wearable devices (e.g., Garmin Descent and Apple Watch Ultra) designed for underwater activities like professional scuba diving, opens up opportunities for underwater networking and localization capabilities on these devices. Here, we present the first underwater acoustic positioning system for smart devices. Unlike conventional systems that use floating buoys as anchors at known locations, we design a system where a dive leader can compute the relative positions of all other divers, without any external infrastructure. Our intuition is that in a well-connected network of devices, if we compute the pairwise distances, we can determine the shape of the network topology. By incorporating orientation information about a single diver who is in the visual range of the leader device, we can then estimate the positions of all the remaining divers, even if they are not within sight. We address various practical problems including detecting erroneous distance estimates, addressing rotational and flipping ambiguities as well as designing a distributed timestamp protocol that scales linearly with the number of devices. Our evaluations show that our distributed system running on underwater deployments of 4-5 commodity smart devices can perform pairwise ranging and localization with median errors of 0.5-0.9 m and 0.9-1.6 m |
| 2023-07-20 | Hybrid FEM and peridynamic simulation of hydraulic fracture propagation in saturated porous media | Tao Ni et.al. | 2307.10929v1 | null | This paper presents a hybrid modeling approach for simulating hydraulic fracture propagation in saturated porous media: ordinary state-based peridynamics is used to describe the behavior of the solid phase, including the deformation and crack propagation, while FEM is used to describe the fluid flow and to evaluate the pore pressure. Classical Biot poroelasticity theory is adopted. The proposed approach is first verified by comparing its results with the exact solutions of two examples. Subsequently, a series of pressure- and fluid-driven crack propagation examples are solved and presented. The phenomenon of fluid pressure oscillation is observed in the fluid-driven crack propagation examples, which is consistent with previous experimental and numerical evidences. All the presented examples demonstrate the capability of the proposed approach in solving problems of hydraulic fracture propagation in saturated porous media. |
| 2023-07-20 | The Role of Entropy and Reconstruction in Multi-View Self-Supervised Learning | Borja Rodríguez-Gálvez et.al. | 2307.10907v1 | link | The mechanisms behind the success of multi-view self-supervised learning (MVSSL) are not yet fully understood. Contrastive MVSSL methods have been studied through the lens of InfoNCE, a lower bound of the Mutual Information (MI). However, the relation between other MVSSL methods and MI remains unclear. We consider a different lower bound on the MI consisting of an entropy and a reconstruction term (ER), and analyze the main MVSSL families through its lens. Through this ER bound, we show that clustering-based methods such as DeepCluster and SwAV maximize the MI. We also re-interpret the mechanisms of distillation-based approaches such as BYOL and DINO, showing that they explicitly maximize the reconstruction term and implicitly encourage a stable entropy, and we confirm this empirically. We show that replacing the objectives of common MVSSL methods with this ER bound achieves competitive performance, while making them stable when training with smaller batch sizes or smaller exponential moving average (EMA) coefficients. Github repo: https://github.com/apple/ml-entropy-reconstruction. |
| 2023-07-20 | Asymptotic expansion for branching killed Brownian motion with drift | Haojie Hou et.al. | 2307.10754v1 | null | Let |
| 2023-07-20 | Kick Back & Relax: Learning to Reconstruct the World by Watching SlowTV | Jaime Spencer et.al. | 2307.10713v1 | link | Self-supervised monocular depth estimation (SS-MDE) has the potential to scale to vast quantities of data. Unfortunately, existing approaches limit themselves to the automotive domain, resulting in models incapable of generalizing to complex environments such as natural or indoor settings. To address this, we propose a large-scale SlowTV dataset curated from YouTube, containing an order of magnitude more data than existing automotive datasets. SlowTV contains 1.7M images from a rich diversity of environments, such as worldwide seasonal hiking, scenic driving and scuba diving. Using this dataset, we train an SS-MDE model that provides zero-shot generalization to a large collection of indoor/outdoor datasets. The resulting model outperforms all existing SSL approaches and closes the gap on supervised SoTA, despite using a more efficient architecture. We additionally introduce a collection of best-practices to further maximize performance and zero-shot generalization. This includes 1) aspect ratio augmentation, 2) camera intrinsic estimation, 3) support frame randomization and 4) flexible motion estimation. Code is available at https://github.com/jspenmar/slowtv_monodepth. |
| 2023-07-20 | Influence of phytohormones on seed germination of Solanum linnaeanum | Aram Akram Mohammed et.al. | 2307.11109v1 | null | The aim of this study was to determine the germination ability and seedling growth of the apple of Sodom by soaking in water, gibberellin (GA3), naphthylacetic acid (NAA), and salicylic acid (SA), separately. The findings showed that NAA at 50 mgL-1 produced superior germination (77.78%), germination speed (1.43 seeds/time interval), hypocotyl length (1.01 cm), hypocotyl diameter (1.13 mm), leaf number (2.66), and root number (17.25), followed by 50 and 100 mgL-1 GA3, particularly in germination percentage. The best root length (5.33 cm) was detected at 100 mgL-1 SA. In contrast, control seeds and water-soaked seeds showed inferior results. The seeds of the apple of Sodom can be germinated successfully as a result of treatment with NAA at 50 mgL-1, followed by GA3 at 50 and 100 mgL-1. |
| 2023-07-19 | Superfast and sub-wavelength orbital rotation of plasmonic particles in focused Gaussian beams | Lei-Ming Zhou et.al. | 2307.10090v1 | null | The use of nanophotonics for optical manipulation has continuously attracted interest in both fundamental research and practical applications, due to its significantly enhanced capabilities at the nanoscale. In this work, we showed that plasmonic particles can be trapped at off-axis location in Gaussian beams assisted by surface plasmon resonance. The off-axis displacement can be tuned at the sub-wavelength scale by the incident light beams. Based on these, we propose that a superfast orbital rotation of particles in continuous-wave laser beam can be realized in tightly focused circularly polarized Gaussian beams. The rotation has a tunable orbital radius at the sub-wavelength scale and a superfast rotation speed (more than 10^4 r/s in water under common laboratory conditions). Our work will aid in the development of optically driven nanomachines, and find applications in micro/nano-rheology, micro-fluid mechanics, and biological research at the nanoscale. |
| 2023-07-19 | DFT+μ: Density Functional Theory for Muon Site Determination | S. J. Blundell et.al. | 2307.10076v1 | null | The technique of muon spin rotation ({\mu}SR) has emerged in the last few decades as one of the most powerful methods of obtaining local magnetic information. To make the technique fully quantitative, it is necessary to have an accurate estimate of where inside the crystal structure the muon implants. This can be provided by density functional theory calculations using an approach that is termed DFT+{\mu}, density functional theory with the implanted muon included. This article reviews this approach, describes some recent successes in particular {\mu}SR experiments, and suggests some avenues for future exploration. |
| 2023-07-19 | Epilegomena to the study of semiclassical orthogonal polynomials | K. Castillo et.al. | 2307.10331v2 | null | In his monograph [Classical and quantum orthogonal polynomials in one variable, Cambridge University Press, 2005 (paperback edition 2009)], Ismail conjectured that certain structure relations involving the Askey-Wilson operator characterize proper subsets of the set of all |
| Publish Date | Title | Authors | Code | Abstract | |
|---|---|---|---|---|---|
| 2023-07-27 | Cavity-Mediated Molecular Entanglement and Generation of Non-Classical States of Light | Davis M. Welakuh et.al. | 2307.15047v1 | null | The generation and control of entanglement in a quantum mechanical system is a critical element of nearly all quantum applications. Molecular systems are a promising candidate, with numerous degrees of freedom able to be targeted. However, knowledge of inter-system entanglement mechanisms in such systems is limited. In this work, we demonstrate the generation of entanglement between vibrational degrees of freedom in molecules via strong coupling to a cavity mode driven by a weak coherent field. In a bi-molecular system, we show entanglement can not only be generated between the cavity and molecular system, but also between molecules. This process also results in the generation of non-classical states of light, providing potential pathways for harnessing entanglement in molecular systems. |
| 2023-07-27 | Vibrations and Heat Transfer in Glasses: the role played by Disorder | Anne Tanguy et.al. | 2307.15038v1 | null | Amorphous materials are also distinguished from crystals by their thermal properties. The structural disorder seems to be responsible both for a significant increase in heat capacity compared to crystals of the same composition, but also for a significant decrease in thermal conductivity. The temperature dependence of thermal conductivity, unusual for common interpretations of solid-state physics, gave rise to a lot of debates. We review in this article different interpretations of thermal conductivity in amorphous materials. We show finally that the temperature dependence of thermal conductivity in dielectric materials can be understood by relating it to the disorder-dependent harmonic vibrational eigenmodes. |
| 2023-07-27 | Smart Contract Migration: Security Analysis and Recommendations from Ethereum to Arbitrum | Xueyan Tang et.al. | 2307.14773v1 | null | This research aims to explore the security risks posed by compatibility and protocol differences in smart contract migration, using the migration of smart contracts from Ethereum to Arbitrum as a case study. Through literature review, online data collection, expert participation, and analysis of smart contract vulnerability cases, this paper conducts an in-depth research of the differences between Ethereum and Arbitrum in areas such as Messaging, Block Properties, Contract Address Alias, and Gas Fees. The research findings indicate the presence of certain security issues during the migration process from Ethereum to Arbitrum, such as abnormal operation of the sequencer resulting in outdated off-chain data retrieval, time-based logical errors, failed permission checks, DOS attacks, and gas loss due to L1-to-L2 transaction failures. To address these security issues, this paper proposes corresponding solutions and recommendations to ensure the security and meet the requirements of the migration process. Additionally, this research emphasizes the continued attention and support for the security issues of smart contract migration through the case of smart contract migration from Ethereum to Arbitrum. It is worth noting that this research is the first in-depth research of smart contract security migration from Ethereum to Arbitrum. |
| 2023-07-27 | Mathematical modelling and computational reduction of molten glass fluid flow in a furnace melting basin | Francesco Ballarin et.al. | 2307.14700v1 | null | In this work, we present the modelling and numerical simulation of a molten glass fluid flow in a furnace melting basin. We first derive a model for a molten glass fluid flow and present numerical simulations based on the Finite Element Method (FEM). We further discuss and validate the results obtained from the simulations by comparing them with experimental results. Finally, we also present a non-intrusive Proper Orthogonal Decomposition (POD) based on Artificial Neural Networks (ANN) to efficiently handle scenarios which require multiple simulations of the fluid flow upon changing parameters of relevant industrial interest. This approach lets us obtain solutions of a complex 3D model, with good accuracy with respect to the FEM solution, yet with negligible associated computational times. |
| 2023-07-26 | High Speed Precise Refractive Index Modification for Photonic Chips through Phase Aberrated Pulsed Lasers | Bangshan Sun et.al. | 2307.14451v1 | null | Integrated photonic chips have significant potential in telecommunications, classic computing, quantum systems, and topological photonics. Direct laser writing offers unique capability for creating three-dimensional photonic devices in an optical glass chip with quick prototyping. However, existing laser writing schemes cannot create index-modified structures in glass that precisely match the laser focal shape while also achieving high scanning speed and high refractive index contrast. Here, we introduce the theory of a refractive index modification scheme that combines the advantages of both traditional non-thermal and thermal regime fabrication methods. We also propose a model of waveguide formation that was verified through a thorough study on the effects of phase aberrations on the laser focus. The presented new photonic chip fabrication scheme uses a novel focal intensity distribution, where pulse energy is relocated to the bottom of a laser focus by manipulating primary and higher order spherical aberrations. The technique can produce index modifications with high scanning speed (20 mm/s or higher), high index contrast (16 x 10-3), and high precision to fabricate with arbitrary cross-sections. This method has potential to expand the capabilities of photonic chips in applications that require small-scale, high precision, or high contrast refractive index control. |
| 2023-07-26 | Event-based Vision for Early Prediction of Manipulation Actions | Daniel Deniz et.al. | 2307.14332v1 | null | Neuromorphic visual sensors are artificial retinas that output sequences of asynchronous events when brightness changes occur in the scene. These sensors offer many advantages including very high temporal resolution, no motion blur and smart data compression ideal for real-time processing. In this study, we introduce an event-based dataset on fine-grained manipulation actions and perform an experimental study on the use of transformers for action prediction with events. There is enormous interest in the fields of cognitive robotics and human-robot interaction on understanding and predicting human actions as early as possible. Early prediction allows anticipating complex stages for planning, enabling effective and real-time interaction. Our Transformer network uses events to predict manipulation actions as they occur, using online inference. The model succeeds at predicting actions early on, building up confidence over time and achieving state-of-the-art classification. Moreover, the attention-based transformer architecture allows us to study the role of the spatio-temporal patterns selected by the model. Our experiments show that the Transformer network captures action dynamic features outperforming video-based approaches and succeeding with scenarios where the differences between actions lie in very subtle cues. Finally, we release the new event dataset, which is the first in the literature for manipulation action recognition. Code will be available at https://github.com/DaniDeniz/EventVisionTransformer. |
| 2023-07-26 | Simulation of Open Quantum Systems via Low-Depth Convex Unitary Evolutions | Joseph Peetz et.al. | 2307.14325v2 | null | Simulating physical systems on quantum devices is one of the most promising applications of quantum technology. Current quantum approaches to simulating open quantum systems are still practically challenging on NISQ-era devices, because they typically require ancilla qubits and extensive controlled sequences. In this work, we propose a hybrid quantum-classical approach for simulating a class of open system dynamics called random-unitary channels. These channels naturally decompose into a series of convex unitary evolutions, which can then be efficiently sampled and run as independent circuits. The method does not require deep ancilla frameworks and thus can be implemented with lower noise costs. We implement simulations of open quantum systems up to dozens of qubits and with large channel rank. |
| 2023-07-26 | Large-scale Fully-Unsupervised Re-Identification | Gabriel Bertocco et.al. | 2307.14278v1 | null | Fully-unsupervised Person and Vehicle Re-Identification have received increasing attention due to their broad applicability in surveillance, forensics, event understanding, and smart cities, without requiring any manual annotation. However, most of the prior art has been evaluated in datasets that have just a couple thousand samples. Such small-data setups often allow the use of costly techniques in time and memory footprints, such as Re-Ranking, to improve clustering results. Moreover, some previous work even pre-selects the best clustering hyper-parameters for each dataset, which is unrealistic in a large-scale fully-unsupervised scenario. In this context, this work tackles a more realistic scenario and proposes two strategies to learn from large-scale unlabeled data. The first strategy performs a local neighborhood sampling to reduce the dataset size in each iteration without violating neighborhood relationships. A second strategy leverages a novel Re-Ranking technique, which has a lower time upper bound complexity and reduces the memory complexity from O(n^2) to O(kn) with k << n. To avoid the pre-selection of specific hyper-parameter values for the clustering algorithm, we also present a novel scheduling algorithm that adjusts the density parameter during training, to leverage the diversity of samples and keep the learning robust to noisy labeling. Finally, due to the complementary knowledge learned by different models, we also introduce a co-training strategy that relies upon the permutation of predicted pseudo-labels, among the backbones, with no need for any hyper-parameters or weighting optimization. The proposed methodology outperforms the state-of-the-art methods in well-known benchmarks and in the challenging large-scale Veri-Wild dataset, with a faster and memory-efficient Re-Ranking strategy, and a large-scale, noisy-robust, and ensemble-based learning approach. |
| 2023-07-26 | Giant conductance of PSS:PEDOT micro-surfaces induced by microbubble lithography | Anand Dev Ranjan et.al. | 2307.14231v1 | null | We provide direct evidence of the effects of interface engineering of various substrates by Microbubble lithography (MBL). We choose a model organic plastic (or polymer) poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS), with conductivity of 140 S/cm, as a representative organic system to showcase our technique. Thus, we fabricate permanent patterns of PEDOT:PSS on glass, followed by a flexible PDMS substrate, and observe conductivity enhancement of 5 times on the former (694 S/cm), and 20 times (2844 S/cm) on the latter, without the use of external doping agents or invasive chemical treatment. Probing the patterned interface, we observe that MBL is able to tune the conformational states of PEDOT:PSS from coils in the pristine form, to extended coils on glass, and almost linear structures in PDMS due to its more malleable liquid-like interface. This results in higher ordering and vanishing grain boundaries leading to the highest conductivity of PEDOT:PSS on PDMS substrates. |
| 2023-07-25 | Integration of Digital Twin and Federated Learning for Securing Vehicular Internet of Things | Deepti Gupta et.al. | 2307.13794v1 | null | In the present era of advanced technology, the Internet of Things (IoT) plays a crucial role in enabling smart connected environments. This includes various domains such as smart homes, smart healthcare, smart cities, smart vehicles, and many others.With ubiquitous smart connected devices and systems, a large amount of data associated with them is at a prime risk from malicious entities (e.g., users, devices, applications) in these systems. Innovative technologies, including cloud computing, Machine Learning (ML), and data analytics, support the development of anomaly detection models for the Vehicular Internet of Things (V-IoT), which encompasses collaborative automatic driving and enhanced transportation systems. However, traditional centralized anomaly detection models fail to provide better services for connected vehicles due to issues such as high latency, privacy leakage, performance overhead, and model drift. Recently, Federated Learning (FL) has gained significant recognition for its ability to address data privacy concerns in the IoT domain. Digital Twin (DT), proves beneficial in addressing uncertain crises and data security issues by creating a virtual replica that simulates various factors, including traffic trajectories, city policies, and vehicle utilization. However, the effectiveness of a V-IoT DT system heavily relies on the collection of long-term and high-quality data to make appropriate decisions. This paper introduces a Hierarchical Federated Learning (HFL) based anomaly detection model for V-IoT, aiming to enhance the accuracy of the model. Our proposed model integrates both DT and HFL approaches to create a comprehensive system for detecting malicious activities using an anomaly detection model. Additionally, real-world V-IoT use case scenarios are presented to demonstrate the application of the proposed model. |
| 2023-07-25 | ChildGAN: Large Scale Synthetic Child Facial Data Using Domain Adaptation in StyleGAN | Muhammad Ali Farooq et.al. | 2307.13746v1 | null | In this research work, we proposed a novel ChildGAN, a pair of GAN networks for generating synthetic boys and girls facial data derived from StyleGAN2. ChildGAN is built by performing smooth domain transfer using transfer learning. It provides photo-realistic, high-quality data samples. A large-scale dataset is rendered with a variety of smart facial transformations: facial expressions, age progression, eye blink effects, head pose, skin and hair color variations, and variable lighting conditions. The dataset comprises more than 300k distinct data samples. Further, the uniqueness and characteristics of the rendered facial features are validated by running different computer vision application tests which include CNN-based child gender classifier, face localization and facial landmarks detection test, identity similarity evaluation using ArcFace, and lastly running eye detection and eye aspect ratio tests. The results demonstrate that synthetic child facial data of high quality offers an alternative to the cost and complexity of collecting a large-scale dataset from real children. |
| 2023-07-25 | Moisture-Driven Mechanisms in Multi-Functional TPU-Based Syntactic Foams | Sabarinathan P Subramaniyan et.al. | 2307.13673v1 | null | Syntactic foams have found widespread usage in various applications including, marine, aerospace, automotive, pipe insulation, electrical cable sheathing, and shoe insoles. However, syntactic foams are often exposed to moisture when used in these applications that potentially alter their viscoelastic, thermal transport, and dielectric properties, which influences their long-term durability. Despite their significance, previous research has mainly focused on experimental studies concerning mechanical property changes resulting from filler loading and different matrix materials, overlooking the fundamental mechanisms resulting from moisture exposure. The current paper aims to bridge this gap in knowledge by elucidating the impact of long-term moisture exposure on TPU and TPU-based syntactic foam through multi-scale materials characterization approaches. Here, we choose a flexible syntactic foam manufactured using thermoplastic polyurethane elastomer (TPU) reinforced with glass microballoons (GMB) through selective laser sintering. Specifically, the research investigates the influence of moisture exposure time and the volume fraction of GMB on chemical and microphase morphological changes, along with their associated mechanisms. The study further examines how these microphase morphological changes manifest in viscoelastic, thermal transport, and dielectric properties. |
| 2023-07-25 | On-Device Speaker Anonymization of Acoustic Embeddings for ASR based onFlexible Location Gradient Reversal Layer | Md Asif Jalal et.al. | 2307.13343v1 | null | Smart devices serviced by large-scale AI models necessitates user data transfer to the cloud for inference. For speech applications, this means transferring private user information, e.g., speaker identity. Our paper proposes a privacy-enhancing framework that targets speaker identity anonymization while preserving speech recognition accuracy for our downstream task~-~Automatic Speech Recognition (ASR). The proposed framework attaches flexible gradient reversal based speaker adversarial layers to target layers within an ASR model, where speaker adversarial training anonymizes acoustic embeddings generated by the targeted layers to remove speaker identity. We propose on-device deployment by execution of initial layers of the ASR model, and transmitting anonymized embeddings to the cloud, where the rest of the model is executed while preserving privacy. Experimental results show that our method efficiently reduces speaker recognition relative accuracy by 33%, and improves ASR performance by achieving 6.2% relative Word Error Rate (WER) reduction. |
| 2023-07-24 | Evaluating the reliability of automatically generated pedestrian and bicycle crash surrogates | Agnimitra Sengupta et.al. | 2307.13178v1 | null | Vulnerable road users (VRUs), such as pedestrians and bicyclists, are at a higher risk of being involved in crashes with motor vehicles, and crashes involving VRUs also are more likely to result in severe injuries or fatalities. Signalized intersections are a major safety concern for VRUs due to their complex and dynamic nature, highlighting the need to understand how these road users interact with motor vehicles and deploy evidence-based countermeasures to improve safety performance. Crashes involving VRUs are relatively infrequent, making it difficult to understand the underlying contributing factors. An alternative is to identify and use conflicts between VRUs and motorized vehicles as a surrogate for safety performance. Automatically detecting these conflicts using a video-based systems is a crucial step in developing smart infrastructure to enhance VRU safety. The Pennsylvania Department of Transportation conducted a study using video-based event monitoring system to assess VRU and motor vehicle interactions at fifteen signalized intersections across Pennsylvania to improve VRU safety performance. This research builds on that study to assess the reliability of automatically generated surrogates in predicting confirmed conflicts using advanced data-driven models. The surrogate data used for analysis include automatically collectable variables such as vehicular and VRU speeds, movements, post-encroachment time, in addition to manually collected variables like signal states, lighting, and weather conditions. The findings highlight the varying importance of specific surrogates in predicting true conflicts, some being more informative than others. The findings can assist transportation agencies to collect the right types of data to help prioritize infrastructure investments, such as bike lanes and crosswalks, and evaluate their effectiveness. |
| 2023-07-24 | Schema-Driven Actionable Insight Generation and Smart Recommendation | Allmin Susaiyah et.al. | 2307.13176v1 | null | In natural language generation (NLG), insight mining is seen as a data-to-text task, where data is mined for interesting patterns and verbalised into 'insight' statements. An 'over-generate and rank' paradigm is intuitively used to generate such insights. The multidimensionality and subjectivity of this process make it challenging. This paper introduces a schema-driven method to generate actionable insights from data to drive growth and change. It also introduces a technique to rank the insights to align with user interests based on their feedback. We show preliminary qualitative results of the insights generated using our technique and demonstrate its ability to adapt to feedback. |
| 2023-07-24 | Why Don't You Clean Your Glasses? Perception Attacks with Dynamic Optical Perturbations | Yi Han et.al. | 2307.13131v1 | null | Camera-based autonomous systems that emulate human perception are increasingly being integrated into safety-critical platforms. Consequently, an established body of literature has emerged that explores adversarial attacks targeting the underlying machine learning models. Adapting adversarial attacks to the physical world is desirable for the attacker, as this removes the need to compromise digital systems. However, the real world poses challenges related to the "survivability" of adversarial manipulations given environmental noise in perception pipelines and the dynamicity of autonomous systems. In this paper, we take a sensor-first approach. We present EvilEye, a man-in-the-middle perception attack that leverages transparent displays to generate dynamic physical adversarial examples. EvilEye exploits the camera's optics to induce misclassifications under a variety of illumination conditions. To generate dynamic perturbations, we formalize the projection of a digital attack into the physical domain by modeling the transformation function of the captured image through the optical pipeline. Our extensive experiments show that EvilEye's generated adversarial perturbations are much more robust across varying environmental light conditions relative to existing physical perturbation frameworks, achieving a high attack success rate (ASR) while bypassing state-of-the-art physical adversarial detection frameworks. We demonstrate that the dynamic nature of EvilEye enables attackers to adapt adversarial examples across a variety of objects with a significantly higher ASR compared to state-of-the-art physical world attack frameworks. Finally, we discuss mitigation strategies against the EvilEye attack. |
| 2023-07-24 | Exploring Quantum Annealing Architectures: A Spin Glass Perspective | Gabriel Jaumà et.al. | 2307.13065v1 | null | We study the spin-glass transition in several Ising models of relevance for quantum annealers. We extract the spin-glass critical temperature by extrapolating the pseudo-critical properties obtained with Replica-Exchange Monte-Carlo for finite-size systems. We find a spin-glass phase for some random lattices (random-regular and small-world graphs) in good agreement with previous results. However, our results for the quasi-two-dimensional graphs implemented in the D-Wave annealers (Chimera, Zephyr, and Pegasus) indicate only a zero-temperature spin-glass state, as their pseudo-critical temperature drifts towards smaller values. This implies that the asymptotic runtime to find the low-energy configuration of those graphs is likely to be polynomial in system size, nevertheless, this scaling may only be reached for very large system sizes -- much larger than existing annealers -- as we observe an abrupt increase in the computational cost of the simulations around the pseudo-critical temperatures. Thus, two-dimensional systems with local crossings can display enough complexity to make unfeasible the search with classical methods of low-energy configurations. |
| 2023-07-24 | Wide Field-of-View, Large-Area Long-wave Infrared Silicon Metalenses | Hung-I Lin et.al. | 2307.12974v1 | null | Long-wave infrared (LWIR, 8-12 |
| 2023-07-24 | Economic Analysis of Smart Roadside Infrastructure Sensors for Connected and Automated Mobility | Laurent Kloeker et.al. | 2307.12893v1 | null | Smart roadside infrastructure sensors in the form of intelligent transportation system stations (ITS-Ss) are increasingly deployed worldwide at relevant traffic nodes. The resulting digital twins of the real environment are suitable for developing and validating connected and automated driving functions and for increasing the operational safety of intelligent vehicles by providing ITS-S real-time data. However, ITS-Ss are very costly to establish and operate. The choice of sensor technology also has an impact on the overall costs as well as on the data quality. So far, there is only insufficient knowledge about the concrete expenses that arise with the construction of different ITS-S setups. Within this work, multiple modular infrastructure sensor setups are investigated with the help of a life cycle cost analysis (LCCA). Their economic efficiency, different user requirements and sensor data qualities are considered. Based on the static cost model, a Monte Carlo simulation is performed, to generate a range of possible project costs and to quantify the financial risks of implementing ITS-S projects of different scales. Due to its modularity, the calculation model is suitable for diverse applications and outputs a distinctive evaluation of the underlying cost-benefit ratio of investigated setups. |
| 2023-07-24 | A quantitative theoretical model of the boson peak based on stringlet excitations | Cunyuan Jiang et.al. | 2307.12839v1 | null | The boson peak (BP), a low-energy excess in the vibrational density of states over the phonon Debye contribution, is usually identified as one of the distinguishing features between ordered crystals and amorphous solid materials. Despite decades of efforts, its microscopic origin still remains a mystery and a consensus on its theoretical derivation has not yet been achieved. Recently, it has been proposed, and corroborated with simulations, that the BP might stem from intrinsic localized modes which involve string-like excitations ("stringlets") having a one-dimensional (1D) nature. In this work, we build on a theoretical framework originally proposed by Lund that describes the localized modes as 1D vibrating strings, but we specify the stringlet size distribution to be exponential, as observed in independent simulation studies. We show that a generalization of this framework provides an analytically prediction for the BP frequency |
| 2023-07-24 | Residual stresses couple microscopic and macroscopic scales | Sebastian Steinhäuser et.al. | 2307.12764v1 | null | We show how residual stresses emerge in a visco-elastic material as a signature of its past flow history, through an interplay between flow-modified microscopic relaxation and macroscopic features of the flow. Long-lasting temporal-history dependence of the microscopic dynamics and nonlinear rheology are incorporated through the mode-coupling theory of the glass transition (MCT). The theory's integral constitutive equation (ICE) is coupled to continuum mechanics in a finite-element method (FEM) scheme that tracks the flow history through the Finger tensor. The method is suitable for a calculation of residual stresses from a "first-principles" starting point following well-understood approximations. As an example, we calculate within a schematic version of MCT the stress-induced optical birefringence pattern of an amorphous solid cast into the shape of a slab with a cylindrical obstacle and demonstrate how FEM-MCT can predict the dependence of material properties on the material's processing history. |
| 2023-07-24 | Automated Mapping of Adaptive App GUIs from Phones to TVs | Han Hu et.al. | 2307.12522v1 | null | With the increasing interconnection of smart devices, users often desire to adopt the same app on quite different devices for identical tasks, such as watching the same movies on both their smartphones and TV. However, the significant differences in screen size, aspect ratio, and interaction styles make it challenging to adapt Graphical User Interfaces (GUIs) across these devices. Although there are millions of apps available on Google Play, only a few thousand are designed to support smart TV displays. Existing techniques to map a mobile app GUI to a TV either adopt a responsive design, which struggles to bridge the substantial gap between phone and TV or use mirror apps for improved video display, which requires hardware support and extra engineering efforts. Instead of developing another app for supporting TVs, we propose a semi-automated approach to generate corresponding adaptive TV GUIs, given the phone GUIs as the input. Based on our empirical study of GUI pairs for TV and phone in existing apps, we synthesize a list of rules for grouping and classifying phone GUIs, converting them to TV GUIs, and generating dynamic TV layouts and source code for the TV display. Our tool is not only beneficial to developers but also to GUI designers, who can further customize the generated GUIs for their TV app development. An evaluation and user study demonstrate the accuracy of our generated GUIs and the usefulness of our tool. |
| 2023-07-24 | Evolution of Free Volume Elements in Amorphous Polymers Undergoing Uniaxial Deformation: a Molecular Dynamics Simulation Study | Brendan Wernisch et.al. | 2307.12460v1 | null | Amorphous polymers are considered promising materials for separations due to their excellent transport properties and low fabrication costs. The separation performance of a membrane material is characterized by its permeability (overall throughput of components), and selectivity (efficiency of separation). Both permeability and selectivity are controlled by the diffusion of different penetrants through the matrix, which is strongly influenced by the distribution and morphology of the free volume elements (FVEs). FVEs are void spaces in the polymer matrix that result from the inefficient packing of bulky and rigid groups on the polymer backbone. Thus, FVEs dictate the efficiency of membrane polymers, and it is imperative to understand how processing conditions such as high pressure influence their structure. In this paper, we apply uniaxial tensile deformation on three polymers, namely polystyrene (PS), polymethylpentene (PMP), and HAB-6FDA thermally rearranged polymer (TRP), at varying temperatures and strain rates. We calculate the stress strain curve, tensile modulus, and free volume element evolution at these conditions. We find that PMP and PS with low and moderate glass transition temperature, respectively, exhibit the most change in mechanical properties as a function of strain rate and temperature. The properties of TRP, however, do not vary as much. We also find that FVEs become larger with deformation, and the extent of this change is in line with the overall change of mechanical properties of the material. |
| 2023-07-23 | TransNet: Transparent Object Manipulation Through Category-Level Pose Estimation | Huijie Zhang et.al. | 2307.12400v1 | null | Transparent objects present multiple distinct challenges to visual perception systems. First, their lack of distinguishing visual features makes transparent objects harder to detect and localize than opaque objects. Even humans find certain transparent surfaces with little specular reflection or refraction, like glass doors, difficult to perceive. A second challenge is that depth sensors typically used for opaque object perception cannot obtain accurate depth measurements on transparent surfaces due to their unique reflective properties. Stemming from these challenges, we observe that transparent object instances within the same category, such as cups, look more similar to each other than to ordinary opaque objects of that same category. Given this observation, the present paper explores the possibility of category-level transparent object pose estimation rather than instance-level pose estimation. We propose \textit{\textbf{TransNet}}, a two-stage pipeline that estimates category-level transparent object pose using localized depth completion and surface normal estimation. TransNet is evaluated in terms of pose estimation accuracy on a large-scale transparent object dataset and compared to a state-of-the-art category-level pose estimation approach. Results from this comparison demonstrate that TransNet achieves improved pose estimation accuracy on transparent objects. Moreover, we use TransNet to build an autonomous transparent object manipulation system for robotic pick-and-place and pouring tasks. |
| 2023-07-23 | An Efficient Authentication Protocol for Smart Grid Communication Based on On-Chip-Error-Correcting Physical Unclonable Function | Masoud Kaveh et.al. | 2307.12374v1 | null | Security has become a main concern for the smart grid to move from research and development to industry. The concept of security has usually referred to resistance to threats by an active or passive attacker. However, since smart meters (SMs) are often placed in unprotected areas, physical security has become one of the important security goals in the smart grid. Physical unclonable functions (PUFs) have been largely utilized for ensuring physical security in recent years, though their reliability has remained a major problem to be practically used in cryptographic applications. Although fuzzy extractors have been considered as a solution to solve the reliability problem of PUFs, they put a considerable computational cost to the resource-constrained SMs. To that end, we first propose an on-chip-error-correcting (OCEC) PUF that efficiently generates stable digits for the authentication process. Afterward, we introduce a lightweight authentication protocol between the SMs and neighborhood gateway (NG) based on the proposed PUF. The provable security analysis shows that not only the proposed protocol can stand secure in the Canetti-Krawczyk (CK) adversary model but also provides additional security features. Also, the performance evaluation demonstrates the significant improvement of the proposed scheme in comparison with the state-of-the-art. |
| 2023-07-23 | Efficient structural color from pigment-loaded nanostructures | Tianqi Sai et.al. | 2307.12346v1 | null | Color can originate from wavelength-dependence in the absorption of pigments or the scattering of nanostructures. While synthetic colors are dominated by the former, vivid structural colors found in nature have inspired much research on the latter. However, many of the most vibrant colors in nature involve the interactions of structure and pigment. Here, we demonstrate that pigment can be exploited to efficiently create bright structural color at wavelengths outside its absorption band. We created pigment-enhanced Bragg reflectors by sequentially spin-coating layers of poly-vinyl alcohol (PVA) and polystyrene (PS) loaded with |
| 2023-07-23 | Semantic Communication-Empowered Traffic Management using Vehicle Count Prediction | Sachin Kadam et.al. | 2307.12254v1 | null | Vehicle count prediction is an important aspect of smart city traffic management. Most major roads are monitored by cameras with computing and transmitting capabilities. These cameras provide data to the central traffic controller (CTC), which is in charge of traffic control management. In this paper, we propose a joint CNN-LSTM-based semantic communication (SemCom) model in which the semantic encoder of a camera extracts the relevant semantics from raw images. The encoded semantics are then sent to the CTC by the transmitter in the form of symbols. The semantic decoder of the CTC predicts the vehicle count on each road based on the sequence of received symbols and develops a traffic management strategy accordingly. An optimization problem to improve the quality of experience (QoE) is introduced and numerically solved, taking into account constraints such as vehicle user safety, transmit power of camera devices, vehicle count prediction accuracy, and semantic entropy. Using numerical results, we show that the proposed SemCom model reduces overhead by |
| 2023-07-23 | Ru doping induced spin frustration and enhancement of the room-temperature anomalous Hall effect in La2/3Sr1/3MnO3 films | Enda Hua et.al. | 2307.12253v1 | null | In transition-metal-oxide heterostructures, the anomalous Hall effect (AHE) is a powerful tool for detecting the magnetic state and revealing intriguing interfacial magnetic orderings. However, achieving a larger AHE at room temperature in oxide heterostructures is still challenging due to the dilemma of mutually strong spin-orbit coupling and magnetic exchange interactions. Here, we exploit the Ru doping-enhanced AHE in LSMRO epitaxial films. As the B-site Ru doping level increases up to 20 percent, the anomalous Hall resistivity at room temperature can be enhanced from nOhmcm to uOhmcm scale. Ru doping leads to strong competition between ferromagnetic double-exchange interaction and antiferromagnetic super-exchange interaction. The resultant spin frustration and spin-glass state facilitate a strong skew-scattering process, thus significantly enhancing the extrinsic AHE. Our findings could pave a feasible approach for boosting the controllability and reliability of oxide-based spintronic devices. |
| 2023-07-23 | Content Censorship in the InterPlanetary File System | Srivatsan Sridhar et.al. | 2307.12212v1 | null | The InterPlanetary File System (IPFS) is currently the largest decentralized storage solution in operation, with thousands of active participants and millions of daily content transfers. IPFS is used as remote data storage for numerous blockchain-based smart contracts, Non-Fungible Tokens (NFT), and decentralized applications. We present a content censorship attack that can be executed with minimal effort and cost, and that prevents the retrieval of any chosen content in the IPFS network. The attack exploits a conceptual issue in a core component of IPFS, the Kademlia Distributed Hash Table (DHT), which is used to resolve content IDs to peer addresses. We provide efficient detection and mitigation mechanisms for this vulnerability. Our mechanisms achieve a 99.6% detection rate and mitigate 100% of the detected attacks with minimal signaling and computational overhead. We followed responsible disclosure procedures, and our countermeasures are scheduled for deployment in the future versions of IPFS. |
| 2023-07-22 | AI on the Road: A Comprehensive Analysis of Traffic Accidents and Accident Detection System in Smart Cities | Victor Adewopo et.al. | 2307.12128v1 | null | Accident detection and traffic analysis is a critical component of smart city and autonomous transportation systems that can reduce accident frequency, severity and improve overall traffic management. This paper presents a comprehensive analysis of traffic accidents in different regions across the United States using data from the National Highway Traffic Safety Administration (NHTSA) Crash Report Sampling System (CRSS). To address the challenges of accident detection and traffic analysis, this paper proposes a framework that uses traffic surveillance cameras and action recognition systems to detect and respond to traffic accidents spontaneously. Integrating the proposed framework with emergency services will harness the power of traffic cameras and machine learning algorithms to create an efficient solution for responding to traffic accidents and reducing human errors. Advanced intelligence technologies, such as the proposed accident detection systems in smart cities, will improve traffic management and traffic accident severity. Overall, this study provides valuable insights into traffic accidents in the US and presents a practical solution to enhance the safety and efficiency of transportation systems. |
| Publish Date | Title | Authors | Code | Abstract | |
|---|---|---|---|---|---|
| 2023-07-27 | News from the Swampland -- Constraining string theory with astrophysics and cosmology | Nils Schöneberg et.al. | 2307.15060v1 | null | Our current best guess for a unified theory of gravitation and quantum field theory (string theory) generically predicts a set of requirements for a consistently quantized theory, the Swampland criteria. Refined versions of these criteria have recently been shown to be in mild tension with cosmological observations. We summarize the status of the current impact of and constraints on the Swampland conjectures from cosmology, and subject a variety of dark energy quintessence models to recently released cosmological datasets. We find that instead of tightening the tension, the new data allows for slightly more freedom in the Swampland criteria. We further demonstrate that if there is no theoretical argument made to prevent interactions of the moduli fields with the electromagnetic sector, a novel fine-tuning argument arises from the extremely tight current constraints on such interactions. Finally, we conclude with a cautionary tale on model-independent reconstructions of the Swampland criteria from expansion rate data. |
| 2023-07-27 | Probing the large deviations for the Beta random walk in random medium | Alexander K. Hartmann et.al. | 2307.15041v1 | null | We consider a discrete-time random walk on a one-dimensional lattice with space and time-dependent random jump probabilities, known as the Beta random walk. We are interested in the probability that, for a given realization of the jump probabilities (a sample), a walker starting at the origin at time |
| 2023-07-27 | Diverse Inpainting and Editing with GAN Inversion | Ahmet Burak Yildirim et.al. | 2307.15033v1 | null | Recent inversion methods have shown that real images can be inverted into StyleGAN's latent space and numerous edits can be achieved on those images thanks to the semantically rich feature representations of well-trained GAN models. However, extensive research has also shown that image inversion is challenging due to the trade-off between high-fidelity reconstruction and editability. In this paper, we tackle an even more difficult task, inverting erased images into GAN's latent space for realistic inpaintings and editings. Furthermore, by augmenting inverted latent codes with different latent samples, we achieve diverse inpaintings. Specifically, we propose to learn an encoder and mixing network to combine encoded features from erased images with StyleGAN's mapped features from random samples. To encourage the mixing network to utilize both inputs, we train the networks with generated data via a novel set-up. We also utilize higher-rate features to prevent color inconsistencies between the inpainted and unerased parts. We run extensive experiments and compare our method with state-of-the-art inversion and inpainting methods. Qualitative metrics and visual comparisons show significant improvements. |
| 2023-07-27 | Revealing the Impact of Beamforming in ISAC | Chongjun Ouyang et.al. | 2307.15023v1 | null | This letter proposes advanced beamforming design and analyzes its influence on the sensing and communications (S&C) performance for a multiple-antenna integrated S&C (ISAC) system with a single communication user and a single target. Novel closed-form beamformers are derived for three typical scenarios, including the sensing-centric design, communications-centric design, and Pareto optimal design. Regarding each scenario, the outage probability, ergodic communication rate (CR), and sensing rate (SR) are analyzed to derive the diversity orders and high signal-to-noise ratio slopes. Numerical results are provided to demonstrate that i) beamforming design can affect the high-SNR power offset and diversity order but does not influence the high-SNR slope; ii) ISAC exhibits larger high-SNR slopes and a more extensive SR-CR region than conventional frequency-division S&C (FDSAC) techniques. |
| 2023-07-27 | SuperCLUE: A Comprehensive Chinese Large Language Model Benchmark | Liang Xu et.al. | 2307.15020v1 | null | Large language models (LLMs) have shown the potential to be integrated into human daily lives. Therefore, user preference is the most critical criterion for assessing LLMs' performance in real-world scenarios. However, existing benchmarks mainly focus on measuring models' accuracy using multi-choice questions, which limits the understanding of their capabilities in real applications. We fill this gap by proposing a comprehensive Chinese benchmark SuperCLUE, named after another popular Chinese LLM benchmark CLUE. SuperCLUE encompasses three sub-tasks: actual users' queries and ratings derived from an LLM battle platform (CArena), open-ended questions with single and multiple-turn dialogues (OPEN), and closed-ended questions with the same stems as open-ended single-turn ones (CLOSE). Our study shows that accuracy on closed-ended questions is insufficient to reflect human preferences achieved on open-ended ones. At the same time, they can complement each other to predict actual user preferences. We also demonstrate that GPT-4 is a reliable judge to automatically evaluate human preferences on open-ended questions in a Chinese context. Our benchmark will be released at https://www.CLUEbenchmarks.com |
| 2023-07-27 | Decomposing and Routing Quantum Circuits Under Constraints for Neutral Atom Architectures | Natalia Nottingham et.al. | 2307.14996v1 | null | Quantum computing is in an era defined by rapidly evolving quantum hardware technologies, combined with persisting high gate error rates, large amounts of noise, and short coherence times. Overcoming these limitations requires systems-level approaches that account for the strengths and weaknesses of the underlying hardware technology. Yet few hardware-aware compiler techniques exist for neutral atom devices, with no prior work on compiling to the neutral atom native gate set. In particular, current neutral atom hardware does not support certain single-qubit rotations via local addressing, which often requires the circuit to be decomposed into a large number of gates, leading to long circuit durations and low overall fidelities. We propose the first compiler designed to overcome the challenges of limited local addressibility in neutral atom quantum computers. We present algorithms to decompose circuits into the neutral atom native gate set, with emphasis on optimizing total pulse area of global gates, which dominate gate execution costs in several current architectures. Furthermore, we explore atom movement as an alternative to expensive gate decompositions, gaining immense speedup with routing, which remains a huge overhead for many quantum circuits. Our decomposition optimizations result in up to ~3.5x and ~2.9x speedup in time spent executing global gates and time spent executing single-qubit gates, respectively. When combined with our atom movement routing algorithms, our compiler achieves up to ~10x reduction in circuit duration, with over ~2x improvement in fidelity. We show that our compiler strategies can be adapted for a variety of hardware-level parameters as neutral atom technology continues to develop. |
| 2023-07-27 | Learning cross-layer dependence structure in multilayer networks | Jiaheng Li et.al. | 2307.14982v1 | null | Multilayer networks are a network data structure in which elements in a population of interest have multiple modes of interaction or relation, represented by multiple networks called layers. We propose a novel class of models for cross-layer dependence in multilayer networks, aiming to learn how interactions in one or more layers may influence interactions in other layers of the multilayer network, by developing a class of network separable models which separate the network formation process from the layer formation process. In our framework, we are able to extend existing single layer network models to a multilayer network model with cross-layer dependence. We establish non-asymptotic bounds on the error of estimators and demonstrate rates of convergence for both maximum likelihood estimators and maximum pseudolikelihood estimators in scenarios of increasing parameter dimension. We additionally establish non-asymptotic error bounds on the multivariate normal approximation and elaborate a method for model selection which controls the false discovery rate. We conduct simulation studies which demonstrate that our framework and method work well in realistic settings which might be encountered in applications. Lastly, we illustrate the utility of our method through an application to the Lazega lawyers network. |
| 2023-07-27 | A Stochastic Gradient Tracking Algorithm for Decentralized Optimization With Inexact Communication | Suhail M. Shah et.al. | 2307.14942v1 | null | Decentralized optimization is typically studied under the assumption of noise-free transmission. However, real-world scenarios often involve the presence of noise due to factors such as additive white Gaussian noise channels or probabilistic quantization of transmitted data. These sources of noise have the potential to degrade the performance of decentralized optimization algorithms if not effectively addressed. In this paper, we focus on the noisy communication setting and propose an algorithm that bridges the performance gap caused by communication noise while also mitigating other challenges like data heterogeneity. We establish theoretical results of the proposed algorithm that quantify the effect of communication noise and gradient noise on the performance of the algorithm. Notably, our algorithm achieves the optimal convergence rate for minimizing strongly convex, smooth functions in the context of inexact communication and stochastic gradients. Finally, we illustrate the superior performance of the proposed algorithm compared to its state-of-the-art counterparts on machine learning problems using MNIST and CIFAR-10 datasets. |
| 2023-07-27 | Simulated analogues II: a new methodology for non-parametric matching of models to observations | Rami Al-Belmpeisi et.al. | 2307.14924v1 | null | Star formation is a multi-scale problem, and only global simulations that account for the connection from the molecular cloud scale gas flow to the accreting protostar can reflect the observed complexity of protostellar systems. Star-forming regions are characterised by supersonic turbulence and as a result, it is not possible to simultaneously design models that account for the larger environment and in detail reproduce observed stellar systems. Instead, the stellar inventories can be matched statistically, and best matches found that approximate specific observations. Observationally, a combination of single-dish telescopes and interferometers are now able to resolve the nearest protostellar objects on all scales from the protostellar core to the inner 10 AU. We present a new non-parametric methodology which uses high-resolution simulations and post-processing methods to match simulations and observations using deep learning. Our goal is to perform a down-selection from large data sets of synthetic images to a ranked list of best-matching candidates with respect to the observation. This is particularly useful for binary and multiple stellar systems that form in turbulent environments. The objective is to accelerate the rate at which we can do such comparisons, remove biases from hand-picking matches, and contribute to identifying the underlying physical processes that drive the creation and evolution of observed protostellar systems. |
| 2023-07-27 | On the survivability of a population of gas giant planets on wide orbits | Ethan Carter et.al. | 2307.14908v1 | null | The existence of giant planets on wide orbits ($\stackrel{>}{_\sim}100$AU) challenge planet formation theories; the core accretion scenario has difficulty in forming them, whereas the disc instability model forms an overabundance of them that is not seen observations. We perform |
| 2023-07-27 | Scaling Session-Based Transformer Recommendations using Optimized Negative Sampling and Loss Functions | Timo Wilm et.al. | 2307.14906v1 | link | This work introduces TRON, a scalable session-based Transformer Recommender using Optimized Negative-sampling. Motivated by the scalability and performance limitations of prevailing models such as SASRec and GRU4Rec+, TRON integrates top-k negative sampling and listwise loss functions to enhance its recommendation accuracy. Evaluations on relevant large-scale e-commerce datasets show that TRON improves upon the recommendation quality of current methods while maintaining training speeds similar to SASRec. A live A/B test yielded an 18.14% increase in click-through rate over SASRec, highlighting the potential of TRON in practical settings. For further research, we provide access to our source code at https://github.com/otto-de/TRON and an anonymized dataset at https://github.com/otto-de/recsys-dataset. |
| 2023-07-27 | Analyzing the Closed-Loop Performance of Detect-And-Avoid Systems | Ítalo Romani de Oliveira et.al. | 2307.14894v1 | null | Detect-And-Avoid (DAA) algorithms for unmanned air vehicles have industry standards called Minimum Operational Performance Standards (MOPS), establishing criteria to check whether they can ensure safe separation for all plausible operational conditions. However, these MOPS ensure performance for the avoidance maneuvers, which are open-loop, but not for the maneuvers that bring the air vehicles back to their intended courses, closing the control loop of the missions. In this paper, we analyze the closed-loop performance of existing DAA algorithms, by experimenting large numbers of traffic configurations with 4 aircraft in a delimited airspace. We measure and analyze their rates of loss of separation and timeout events, the latter happening when a chain of maneuvers exceeds the maximum supply of energy in a vehicle. We also analyze the efficiency of the closed-loop logic, expressed as the excess fuel rate, and study the relationship between safety and efficiency in these scenarios. Our results show that the inefficiency caused by DAA algorithms is very significant in dense airspaces and that it offers ample space for improvement. Performing the simulations of the closed-loop mission management logic can be highly time consuming. Despite there being Neural Network approximations of DAA logic that alleviate the computational load, none of those that we found available can properly handle cases with more than one intruder in the ownship surveillance range. Therefore, in an attempt to overcome the high computational cost of analyzing the closed-loop performance of DAA algorithms, we study the correlation between inefficiency and safety of closed-loop scenarios, and some indicators from the corresponding open-loop scenarios, such as angle of deviation and number of deviations per flight time. |
| 2023-07-27 | Anisotropic multiband superconductivity in 2M-WS$_{2}$ probed by controlled disorder | Sunil Ghimire et.al. | 2307.14891v1 | null | The intrinsically superconducting Dirac semimetal 2M-WS${2}$ is a promising candidate to realize proximity-induced topological superconductivity in its protected surface states. A precise characterization of the bulk superconducting state is essential for understanding the nature of surface superconductivity in the system. Here, we perform a detailed experimental study of the temperature and nonmagnetic disorder dependence of the London penetration depth $\lambda$, the upper critical field $H{c2}$, and the superconducting transition temperature |
| 2023-07-27 | Constraints on dark matter and astrophysics from tomographic |
Anya Paopiamsap et.al. | 2307.14881v1 | null | We study the cross-correlation between maps of the unresolved |
| 2023-07-27 | One-step nonparametric instrumental regression using smoothing splines | Jad Beyhum et.al. | 2307.14867v1 | null | We extend nonparametric regression smoothing splines to a context where there is endogeneity and instrumental variables are available. Unlike popular existing estimators, the resulting estimator is one-step and relies on a unique regularization parameter. We derive uniform rates of the convergence for the estimator and its first derivative. We also address the issue of imposing monotonicity in estimation. Simulations confirm the good performances of our estimator compared to two-step procedures. Our method yields economically sensible results when used to estimate Engel curves. |
| 2023-07-27 | Modeling Interference for the Coexistence of 6G Networks and Passive Sensing Systems | Paolo Testolina et.al. | 2307.14848v1 | null | Future wireless networks and sensing systems will benefit from access to large chunks of spectrum above 100 GHz, to achieve terabit-per-second data rates in 6th Generation (6G) cellular systems and improve accuracy and reach of Earth exploration and sensing and radio astronomy applications. These are extremely sensitive to interference from artificial signals, thus the spectrum above 100~GHz features several bands which are protected from active transmissions under current spectrum regulations. To provide more agile access to the spectrum for both services, active and passive users will have to coexist without harming passive sensing operations. In this paper, we provide the first, fundamental analysis of Radio Frequency Interference (RFI) that large-scale terrestrial deployments introduce in different satellite sensing systems now orbiting the Earth. We develop a geometry-based analysis and extend it into a data-driven model which accounts for realistic propagation, building obstruction, ground reflection, for network topology with up to |
| 2023-07-27 | State preparation by shallow circuits using feed forward | Harry Buhrman et.al. | 2307.14840v1 | null | In order to achieve fault-tolerant quantum computation, we need to repeat the following sequence of four steps: First, perform 1 or 2 qubit quantum gates (in parallel if possible). Second, do a syndrome measurement on a subset of the qubits. Third, perform a fast classical computation to establish which errors have occurred (if any). Fourth, depending on the errors, we apply a correction step. Then the procedure repeats with the next sequence of gates. In order for these four steps to succeed, we need the error rate of the gates to be below a certain threshold. Unfortunately, the error rates of current quantum hardware are still too high. On the other hand, current quantum hardware platforms are designed with these four steps in mind. In this work we make use of this four-step scheme not to carry out fault-tolerant computations, but to enhance short, constant-depth, quantum circuits that perform 1 qubit gates and nearest-neighbor 2 qubit gates. To explore how this can be useful, we study a computational model which we call Local Alternating Quantum Classical Computations (LAQCC). In this model, qubits are placed in a grid allowing nearest neighbor interactions; the quantum circuits are of constant depth with intermediate measurements; a classical controller can perform log-depth computations on these intermediate measurement outcomes to control future quantum operations. This model fits naturally between quantum algorithms in the NISQ era and full fledged fault-tolerant quantum computation. We show that LAQCC circuits can create long-ranged interactions, which constant-depth quantum circuits cannot achieve, and use it to construct a range of useful multi-qubit gates. With these gates, we create three new state preparation protocols for a uniform superposition over an arbitrary number of states, W-states and Dicke states. |
| 2023-07-27 | Experimental validation of particle-in-cell/Monte Carlo collisions simulations in low-pressure neon capacitively coupled plasmas | Chan-Won Park et.al. | 2307.14821v1 | null | Plasma simulations are powerful tools for understanding fundamental plasma science phenomena and for process optimization in applications. To ensure their quantitative accuracy, they must be validated against experiments. In this work, such an experimental validation is performed for a 1d3v particle-in-cell simulation complemented with the Monte Carlo treatment of collision processes of a capacitively coupled radio frequency plasma driven at 13.56 MHz and operated in neon gas. In a geometrically symmetric reactor the electron density in the discharge center and the spatio-temporal distribution of the electron impact excitation rate from the ground into the Ne 2p$_1$ state are measured by a microwave cutoff probe and phase resolved optical emission spectroscopy, respectively. The measurements are conducted for electrode gaps between 50 mm and 90 mm, neutral gas pressures between 20 mTorr and 50 mTorr, and peak-to-peak values of the driving voltage waveform between 250 V and 650 V. Simulations are performed under identical discharge conditions. In the simulations, various combinations of surface coefficients characterising the interactions of electrons and heavy particles with the anodized aluminium electrode surfaces are adopted. We find, that the simulations using a constant effective heavy particle induced secondary electron emission coefficient of 0.3 and a realistic electron-surface interaction model (which considers energy-dependent and material specific elastic and inelastic electron reflection, as well as the emission of true secondary electrons from the surface) yield results which are in good quantitative agreement with the experimental data. |
| 2023-07-27 | Fate of homogeneous |
Wen-Yuan Ai et.al. | 2307.14811v1 | null | Dark Matter, if represented by a |
| 2023-07-27 | Automatic Parallelization of Software Network Functions | Francisco Pereira et.al. | 2307.14791v1 | null | Software network functions (NFs) trade-off flexibility and ease of deployment for an increased challenge of performance. The traditional way to increase NF performance is by distributing traffic to multiple CPU cores, but this poses a significant challenge: how to parallelize an NF without breaking its semantics? We propose Maestro, a tool that analyzes a sequential implementation of an NF and automatically generates an enhanced parallel version that carefully configures the NIC's Receive Side Scaling mechanism to distribute traffic across cores, while preserving semantics. When possible, Maestro orchestrates a shared-nothing architecture, with each core operating independently without shared memory coordination, maximizing performance. Otherwise, Maestro choreographs a fine-grained read-write locking mechanism that optimizes operation for typical Internet traffic. We parallelized 8 software NFs and show that they generally scale-up linearly until bottlenecked by PCIe when using small packets or by 100Gbps line-rate with typical Internet traffic. Maestro further outperforms modern hardware-based transactional memory mechanisms, even for challenging parallel-unfriendly workloads. |
| 2023-07-27 | A Variance-Reduced Aggregation Based Gradient Tracking method for Distributed Optimization over Directed Networks | Shengchao Zhao et.al. | 2307.14776v1 | null | This paper studies the distributed optimization problem over directed networks with noisy information-sharing. To resolve the imperfect communication issue over directed networks, a series of noise-robust variants of Push-Pull/AB method have been developed. These methods improve the robustness of Push-Pull method against the information-sharing noise through adding small factors on weight matrices and replacing the global gradient tracking with the cumulative gradient tracking. Based on the two techniques, we propose a new variant of the Push-Pull method by presenting a novel mechanism of inter-agent information aggregation, named variance-reduced aggregation (VRA). VRA helps us to release some conditions on the objective function and networks. When the objective function is convex and the sharing-information noise is variance-unbounded, it can be shown that the proposed method converges to the optimal solution almost surely. When the objective function is strongly convex and the sharing-information noise is variance-bounded, the proposed method achieves the convergence rate of |
| 2023-07-27 | Seasonal Variations of the Atmospheric Neutrino Flux measured in IceCube | Karolin Hymon et.al. | 2307.14724v1 | null | The IceCube Neutrino Observatory measures high energy atmospheric neutrinos with high statistics. These atmospheric neutrinos are produced in cosmic ray interactions in the atmosphere, mainly by the decay of pions and kaons. The rate of the measured neutrinos is affected by seasonal temperature variations in the stratosphere, which are expected to increase with the energy of the particle. In this contribution, seasonal energy spectra are obtained using a novel spectrum unfolding approach, the Dortmund Spectrum Estimation Algorithm (DSEA+), in which the energy distribution from 125 GeV to 10 TeV is estimated from measured quantities with machine learning algorithms. The seasonal spectral difference to the annual average flux will be discussed based on preliminary results from IceCube's atmospheric muon neutrino data. |
| 2023-07-27 | Unified Adversarial Patch for Visible-Infrared Cross-modal Attacks in the Physical World | Xingxing Wei et.al. | 2307.14682v1 | null | Physical adversarial attacks have put a severe threat to DNN-based object detectors. To enhance security, a combination of visible and infrared sensors is deployed in various scenarios, which has proven effective in disabling existing single-modal physical attacks. To further demonstrate the potential risks in such cases, we design a unified adversarial patch that can perform cross-modal physical attacks, achieving evasion in both modalities simultaneously with a single patch. Given the different imaging mechanisms of visible and infrared sensors, our work manipulates patches' shape features, which can be captured in different modalities when they undergo changes. To deal with challenges, we propose a novel boundary-limited shape optimization approach that aims to achieve compact and smooth shapes for the adversarial patch, making it easy to implement in the physical world. And a score-aware iterative evaluation method is also introduced to balance the fooling degree between visible and infrared detectors during optimization, which guides the adversarial patch to iteratively reduce the predicted scores of the multi-modal sensors. Furthermore, we propose an Affine-Transformation-based enhancement strategy that makes the learnable shape robust to various angles, thus mitigating the issue of shape deformation caused by different shooting angles in the real world. Our method is evaluated against several state-of-the-art object detectors, achieving an Attack Success Rate (ASR) of over 80%. We also demonstrate the effectiveness of our approach in physical-world scenarios under various settings, including different angles, distances, postures, and scenes for both visible and infrared sensors. |
| 2023-07-27 | Single Photon Superradiance and Subradiance as Collective Emission From Symmetric and Antisymmetric States | Nicola Piovella et.al. | 2307.14667v1 | null | Recent works have shown that collective single photon spontaneous emission from an ensemble of |
| 2023-07-27 | Speed Limits for Deep Learning | Inbar Seroussi et.al. | 2307.14653v1 | null | State-of-the-art neural networks require extreme computational power to train. It is therefore natural to wonder whether they are optimally trained. Here we apply a recent advancement in stochastic thermodynamics which allows bounding the speed at which one can go from the initial weight distribution to the final distribution of the fully trained network, based on the ratio of their Wasserstein-2 distance and the entropy production rate of the dynamical process connecting them. Considering both gradient-flow and Langevin training dynamics, we provide analytical expressions for these speed limits for linear and linearizable neural networks e.g. Neural Tangent Kernel (NTK). Remarkably, given some plausible scaling assumptions on the NTK spectra and spectral decomposition of the labels -- learning is optimal in a scaling sense. Our results are consistent with small-scale experiments with Convolutional Neural Networks (CNNs) and Fully Connected Neural networks (FCNs) on CIFAR-10, showing a short highly non-optimal regime followed by a longer optimal regime. |
| 2023-07-27 | Linear Convergence of Black-Box Variational Inference: Should We Stick the Landing? | Kyurae Kim et.al. | 2307.14642v1 | null | We prove that black-box variational inference (BBVI) with control variates, particularly the sticking-the-landing (STL) estimator, converges at a geometric (traditionally called "linear") rate under perfect variational family specification. In particular, we prove a quadratic bound on the gradient variance of the STL estimator, one which encompasses misspecified variational families. Combined with previous works on the quadratic variance condition, this directly implies convergence of BBVI with the use of projected stochastic gradient descent. We also improve existing analysis on the regular closed-form entropy gradient estimators, which enables comparison against the STL estimator and provides explicit non-asymptotic complexity guarantees for both. |
| 2023-07-27 | Final results of Borexino on CNO solar neutrinos | D. Basilico et.al. | 2307.14636v1 | null | We report the first measurement of CNO solar neutrinos by Borexino that uses the Correlated Integrated Directionality (CID) method, exploiting the sub-dominant Cherenkov light in the liquid scintillator detector. The directional information of the solar origin of the neutrinos is preserved by the fast Cherenkov photons from the neutrino scattered electrons, and is used to discriminate between signal and background. The directional information is independent from the spectral information on which the previous CNO solar neutrino measurements by Borexino were based. While the CNO spectral analysis could only be applied on the Phase-III dataset, the directional analysis can use the complete Borexino data taking period from 2007 to 2021. The absence of CNO neutrinos has been rejected with >5{\sigma} credible level using the Bayesian statistics. The directional CNO measurement is obtained without an external constraint on the $^{210}$Bi contamination of the liquid scintillator, which was applied in the spectral analysis approach. The final and the most precise CNO measurement of Borexino is then obtained by combining the new CID-based CNO result with an improved spectral fit of the Phase-III dataset. Including the statistical and the systematic errors, the extracted CNO interaction rate is $R(\mathrm{CNO})=6.7^{+1.2}{-0.8} , \mathrm{cpd/100 , tonnes}$. Taking into account the neutrino flavor conversion, the resulting CNO neutrino flux at Earth is $\Phi\mathrm{CNO}=6.7 ^{+1.2}_{-0.8} \times 10^8 , \mathrm{cm^{-2} s^{-1}}$, in agreement with the high metallicity Standard Solar Models. The results described in this work reinforce the role of the event directional information in large-scale liquid scintillator detectors and open up new avenues for the next-generation liquid scintillator or hybrid neutrino experiments. |
| 2023-07-27 | BubbleML: A Multi-Physics Dataset and Benchmarks for Machine Learning | Sheikh Md Shakeel Hassan et.al. | 2307.14623v1 | link | In the field of phase change phenomena, the lack of accessible and diverse datasets suitable for machine learning (ML) training poses a significant challenge. Existing experimental datasets are often restricted, with limited availability and sparse ground truth data, impeding our understanding of this complex multi-physics phenomena. To bridge this gap, we present the BubbleML Dataset(https://github.com/HPCForge/BubbleML) which leverages physics-driven simulations to provide accurate ground truth information for various boiling scenarios, encompassing nucleate pool boiling, flow boiling, and sub-cooled boiling. This extensive dataset covers a wide range of parameters, including varying gravity conditions, flow rates, sub-cooling levels, and wall superheat, comprising 51 simulations. BubbleML is validated against experimental observations and trends, establishing it as an invaluable resource for ML research. Furthermore, we showcase its potential to facilitate exploration of diverse downstream tasks by introducing two benchmarks: (a) optical flow analysis to capture bubble dynamics, and (b) operator networks for learning temperature dynamics. The BubbleML dataset and its benchmarks serve as a catalyst for advancements in ML-driven research on multi-physics phase change phenomena, enabling the development and comparison of state-of-the-art techniques and models. |
| 2023-07-27 | Nonlinear Convex Optimization: From Relaxed Proximal Point Algorithm to Prediction Correction Method | Sai Wang et.al. | 2307.14615v1 | null | Nonlinear convex problems arise in various areas of applied mathematics and engineering. Classical techniques such as the relaxed proximal point algorithm (PPA) and the prediction correction (PC) method were proposed for linearly constrained convex problems. However, these methods have not been investigated for nonlinear constraints. In this paper, we customize the varying proximal matrix to develop the relaxed PPA for nonlinear convex problems. We also extend the PC method to nonlinear convex problems. As both methods are an extension of the PPA-based contraction method, their sequence convergence can be directly established. Moreover, we theoretically demonstrate that both methods can achieve a convergence rate of |
| 2023-07-27 | $ \mathrm{Sr}{4}\mathrm{Al}{2}\mathrm{O}_{7}$: A New Sacrificial Layer with High Water Dissolution Rate for the Synthesis of Freestanding Oxide Membranes | Leyan Nian et.al. | 2307.14584v1 | null | Freestanding perovskite oxide membranes have drawn great attention recently since they offer exceptional structural tunability and stacking ability, providing new opportunities in fundamental research and potential device applications in silicon-based semiconductor technology. Among different types of sacrificial layers, the $ \mathrm{(Ca, Sr, Ba)}{3}\mathrm{Al}{2}\mathrm{O}{6}$ compounds are most widely used since they can be dissolved in water and prepare high-quality perovskite oxide membranes with clean and sharp surfaces and interfaces. However, the typical transfer process takes a long time (up to hours) in obtaining millimeter-size freestanding membranes, let alone realize wafer-scale samples with high yield. Here, we introduce a new member of the $ \mathrm{SrO-}\mathrm{Al}{2}\mathrm{O}{3}$ family,$ \mathrm{Sr}{4}\mathrm{Al}{2}\mathrm{O}{7},$, and demonstrate its high dissolution rate, about 10 times higher than that of $ \mathrm{Sr}{3}\mathrm{Al}{2}\mathrm{O}{6}$. The high-dissolution-rate of $ \mathrm{Sr}{4}\mathrm{Al}{2}\mathrm{O}{7}$ is most likely related to the more discrete Al-O networks and higher concentration of water-soluble Sr-O species in this compound. Our work significantly facilitates the preparation of freestanding membranes and sheds light on the integration of multifunctional perovskite oxides in practical electronic devices. |
| Publish Date | Title | Authors | Code | Abstract | |
|---|---|---|---|---|---|
| 2023-07-27 | Cavity-Mediated Molecular Entanglement and Generation of Non-Classical States of Light | Davis M. Welakuh et.al. | 2307.15047v1 | null | The generation and control of entanglement in a quantum mechanical system is a critical element of nearly all quantum applications. Molecular systems are a promising candidate, with numerous degrees of freedom able to be targeted. However, knowledge of inter-system entanglement mechanisms in such systems is limited. In this work, we demonstrate the generation of entanglement between vibrational degrees of freedom in molecules via strong coupling to a cavity mode driven by a weak coherent field. In a bi-molecular system, we show entanglement can not only be generated between the cavity and molecular system, but also between molecules. This process also results in the generation of non-classical states of light, providing potential pathways for harnessing entanglement in molecular systems. |
| 2023-07-27 | Demazure operators for double cosets | Ben Elias et.al. | 2307.15021v1 | null | For any Coxeter system, and any double coset for two standard parabolic subgroups, we introduce a Demazure operator. These operators form a basis for morphism spaces in a category we call the nilCoxeter category, and we also present this category by generators and relations. We prove a generalization to this context of Demazure's celebrated theorem on Frobenius extensions. This generalized theorem serves as a criterion for ensuring the proper behavior of singular Soergel bimodules. |
| 2023-07-27 | Rationality for arbitrary closure operations and the test ideal of full extended plus closure | Zhan Jiang et.al. | 2307.14958v1 | null | We extend the notion of F-rationality to other closure operations, inspired by the work of Smith, Epstein and Schwede, and Ma and Schwede, which describe F-rationality in terms of the canonical module and top local cohomology module. We give conditions for a closure operation cl on a Cohen-Macaulay complete local ring under which cl-rationality is equivalent to parameter ideals being cl-closed. We also demonstrate that full extended plus closure as defined by Heitmann and weak full extended plus closure as defined by the first named author have no big test elements. |
| 2023-07-27 | On integral decomposition of unipotent elements in integral group rings | Geoffrey Janssens et.al. | 2307.14820v1 | null | Jespers and Sun conjectured that if a finite group |
| 2023-07-27 | Smart Contract Migration: Security Analysis and Recommendations from Ethereum to Arbitrum | Xueyan Tang et.al. | 2307.14773v1 | null | This research aims to explore the security risks posed by compatibility and protocol differences in smart contract migration, using the migration of smart contracts from Ethereum to Arbitrum as a case study. Through literature review, online data collection, expert participation, and analysis of smart contract vulnerability cases, this paper conducts an in-depth research of the differences between Ethereum and Arbitrum in areas such as Messaging, Block Properties, Contract Address Alias, and Gas Fees. The research findings indicate the presence of certain security issues during the migration process from Ethereum to Arbitrum, such as abnormal operation of the sequencer resulting in outdated off-chain data retrieval, time-based logical errors, failed permission checks, DOS attacks, and gas loss due to L1-to-L2 transaction failures. To address these security issues, this paper proposes corresponding solutions and recommendations to ensure the security and meet the requirements of the migration process. Additionally, this research emphasizes the continued attention and support for the security issues of smart contract migration through the case of smart contract migration from Ethereum to Arbitrum. It is worth noting that this research is the first in-depth research of smart contract security migration from Ethereum to Arbitrum. |
| 2023-07-27 | Smooth modules over the N=1 Bondi-Metzner-Sachs superalgebra | Dong Liu et.al. | 2307.14608v1 | null | In this paper, we present a determinant formula for the contravariant form on Verma modules over the N=1 Bondi-Metzner-Sachs (BMS) superalgebra. This formula establishes a necessary and sufficient condition for the irreducibility of the Verma modules. We then introduce and characterize a class of simple smooth modules that generalize both Verma and Whittaker modules over the N=1 BMS superalgebra. We also utilize the Heisenberg-Clifford vertex superalgebra to construct a free field realization for the N=1 BMS superalgebra. This free field realization allows us to obtain a family of natural smooth modules over the N=1 BMS superalgebra, which includes Fock modules and certain Whittaker modules. |
| 2023-07-27 | Accelerating Polynomial Modular Multiplication with Crossbar-Based Compute-in-Memory | Mengyuan Li et.al. | 2307.14557v1 | null | Lattice-based cryptographic algorithms built on ring learning with error theory are gaining importance due to their potential for providing post-quantum security. However, these algorithms involve complex polynomial operations, such as polynomial modular multiplication (PMM), which is the most time-consuming part of these algorithms. Accelerating PMM is crucial to make lattice-based cryptographic algorithms widely adopted by more applications. This work introduces a novel high-throughput and compact PMM accelerator, X-Poly, based on the crossbar (XB)-type compute-in-memory (CIM). We identify the most appropriate PMM algorithm for XB-CIM. We then propose a novel bit-mapping technique to reduce the area and energy of the XB-CIM fabric, and conduct processing engine (PE)-level optimization to increase memory utilization and support different problem sizes with a fixed number of XB arrays. X-Poly design achieves 3.1X10^6 PMM operations/s throughput and offers 200X latency improvement compared to the CPU-based implementation. It also achieves 3.9X throughput per area improvement compared with the state-of-the-art CIM accelerators. |
| 2023-07-26 | On the dimension of cofinite modules | Majid Rahro Zargar et.al. | 2307.14513v1 | null | Let |
| 2023-07-26 | Characterizing Rickart and Baer ultragraph Leavitt path algebras | Mitchell Jubeir et.al. | 2307.14431v1 | null | We characterize ultragraph Leavitt path algebras that are Rickart, locally Rickart, graded Rickart, and graded Rickart *-rings. We also characterize ultragraph Leavitt path algebras that are Baer, locally Baer, graded Baer, Baer *-rings, and combinations of these. These characterizations build on and generalize the work of Hazrat and Vas on Leavitt path algebras over fields to ultragraph Leavitt path algebras over semi-simple commutative unital rings. |
| 2023-07-26 | Commuting Line Defects At |
Davide Gaiotto et.al. | 2307.14429v1 | null | We explain the physical origin of a curious property of algebras $\mathcal{A}\mathfrak{q}$ which encode the rotation-equivariant fusion ring of half-BPS line defects in four-dimensional $\mathcal{N}=2$ supersymmetric quantum field theories. These algebras are a quantization of the algebras of holomorphic functions on the three-dimensional Coulomb branch of the SQFTs, with deformation parameter $\log \mathfrak{q}$. They are known to acquire a large center, canonically isomorphic to the undeformed algebra, whenever $\mathfrak{q}$ is a root of unity. We give a physical explanation of this fact. We also generalize the construction to characterize the action of this center in the $\mathcal{A}\mathfrak{q}$-modules associated to three-dimensional |
| 2023-07-26 | Event-based Vision for Early Prediction of Manipulation Actions | Daniel Deniz et.al. | 2307.14332v1 | null | Neuromorphic visual sensors are artificial retinas that output sequences of asynchronous events when brightness changes occur in the scene. These sensors offer many advantages including very high temporal resolution, no motion blur and smart data compression ideal for real-time processing. In this study, we introduce an event-based dataset on fine-grained manipulation actions and perform an experimental study on the use of transformers for action prediction with events. There is enormous interest in the fields of cognitive robotics and human-robot interaction on understanding and predicting human actions as early as possible. Early prediction allows anticipating complex stages for planning, enabling effective and real-time interaction. Our Transformer network uses events to predict manipulation actions as they occur, using online inference. The model succeeds at predicting actions early on, building up confidence over time and achieving state-of-the-art classification. Moreover, the attention-based transformer architecture allows us to study the role of the spatio-temporal patterns selected by the model. Our experiments show that the Transformer network captures action dynamic features outperforming video-based approaches and succeeding with scenarios where the differences between actions lie in very subtle cues. Finally, we release the new event dataset, which is the first in the literature for manipulation action recognition. Code will be available at https://github.com/DaniDeniz/EventVisionTransformer. |
| 2023-07-26 | Simulation of Open Quantum Systems via Low-Depth Convex Unitary Evolutions | Joseph Peetz et.al. | 2307.14325v2 | null | Simulating physical systems on quantum devices is one of the most promising applications of quantum technology. Current quantum approaches to simulating open quantum systems are still practically challenging on NISQ-era devices, because they typically require ancilla qubits and extensive controlled sequences. In this work, we propose a hybrid quantum-classical approach for simulating a class of open system dynamics called random-unitary channels. These channels naturally decompose into a series of convex unitary evolutions, which can then be efficiently sampled and run as independent circuits. The method does not require deep ancilla frameworks and thus can be implemented with lower noise costs. We implement simulations of open quantum systems up to dozens of qubits and with large channel rank. |
| 2023-07-26 | Large-scale Fully-Unsupervised Re-Identification | Gabriel Bertocco et.al. | 2307.14278v1 | null | Fully-unsupervised Person and Vehicle Re-Identification have received increasing attention due to their broad applicability in surveillance, forensics, event understanding, and smart cities, without requiring any manual annotation. However, most of the prior art has been evaluated in datasets that have just a couple thousand samples. Such small-data setups often allow the use of costly techniques in time and memory footprints, such as Re-Ranking, to improve clustering results. Moreover, some previous work even pre-selects the best clustering hyper-parameters for each dataset, which is unrealistic in a large-scale fully-unsupervised scenario. In this context, this work tackles a more realistic scenario and proposes two strategies to learn from large-scale unlabeled data. The first strategy performs a local neighborhood sampling to reduce the dataset size in each iteration without violating neighborhood relationships. A second strategy leverages a novel Re-Ranking technique, which has a lower time upper bound complexity and reduces the memory complexity from O(n^2) to O(kn) with k << n. To avoid the pre-selection of specific hyper-parameter values for the clustering algorithm, we also present a novel scheduling algorithm that adjusts the density parameter during training, to leverage the diversity of samples and keep the learning robust to noisy labeling. Finally, due to the complementary knowledge learned by different models, we also introduce a co-training strategy that relies upon the permutation of predicted pseudo-labels, among the backbones, with no need for any hyper-parameters or weighting optimization. The proposed methodology outperforms the state-of-the-art methods in well-known benchmarks and in the challenging large-scale Veri-Wild dataset, with a faster and memory-efficient Re-Ranking strategy, and a large-scale, noisy-robust, and ensemble-based learning approach. |
| 2023-07-26 | Distributions of the Density and Kinetic Temperature of the Molecular Gas in the Central Region of NGC 613 using Hierarchical Bayesian Inference | Hiroyuki Kaneko et.al. | 2307.14092v1 | null | We present position-position-velocity (PPV) cubes of the physical and chemical properties of the molecular medium in the central 1.2 kpc region of the active galaxy NGC 613 at a PPV resolution of 0.$^{\prime\prime}$8$\times$0.$^{\prime\prime}$8$\times$10 km s$^{-1}$ (0.$^{\prime\prime}$8 = $\sim$68 pc). We used eight molecular lines obtained with ALMA. Non-LTE calculation with hierarchical Bayesian inference was used to construct PPV cubes of the gas kinetic temperature ( |
| 2023-07-26 | The cycle class of the supersingular locus of principally polarized abelian varieties | Gerard van der Geer et.al. | 2307.14393v1 | null | We prove a formula for the cycle class of the supersingular locus in the Chow ring with rational coefficients of the moduli space of principally polarized abelian varieties in characteristic |
| 2023-07-26 | Topology of light rings for extremal and non-extremal Kerr-Newman Taub-NUT black holes without |
Shan-Ping Wu et.al. | 2307.14003v1 | null | Understanding the light ring, one kind fundamental orbit, shall provide us with novel insight into the astronomical phenomena, such as the ringdown of binary merger and shadow of black holes. Recently, topological approach has preliminarily demonstrated its potential advantages on the properties of the light rings. However, for the black holes without |
| 2023-07-26 | Schubert calculus in Lie groups | Haibao Duan et.al. | 2307.13904v1 | null | Let |
| 2023-07-25 | The Core of Bayesian Persuasion | Laura Doval et.al. | 2307.13849v1 | null | An analyst observes the frequency with which an agent takes actions, but not the frequency with which she takes actions conditional on a payoff relevant state. In this setting, we ask when the analyst can rationalize the agent's choices as the outcome of the agent learning something about the state before taking action. Our characterization marries the obedience approach in information design (Bergemann and Morris, 2016) and the belief approach in Bayesian persuasion (Kamenica and Gentzkow, 2011) relying on a theorem by Strassen (1965) and Hall's marriage theorem. We apply our results to ring-network games and to identify conditions under which a data set is consistent with a public information structure in first-order Bayesian persuasion games. |
| 2023-07-25 | The local bisection hypothesis for twisted groupoid C-algebras* | Becky Armstrong et.al. | 2307.13814v1 | null | In this note, we present criteria that are equivalent to a locally compact Hausdorff groupoid |
| 2023-07-25 | Integration of Digital Twin and Federated Learning for Securing Vehicular Internet of Things | Deepti Gupta et.al. | 2307.13794v1 | null | In the present era of advanced technology, the Internet of Things (IoT) plays a crucial role in enabling smart connected environments. This includes various domains such as smart homes, smart healthcare, smart cities, smart vehicles, and many others.With ubiquitous smart connected devices and systems, a large amount of data associated with them is at a prime risk from malicious entities (e.g., users, devices, applications) in these systems. Innovative technologies, including cloud computing, Machine Learning (ML), and data analytics, support the development of anomaly detection models for the Vehicular Internet of Things (V-IoT), which encompasses collaborative automatic driving and enhanced transportation systems. However, traditional centralized anomaly detection models fail to provide better services for connected vehicles due to issues such as high latency, privacy leakage, performance overhead, and model drift. Recently, Federated Learning (FL) has gained significant recognition for its ability to address data privacy concerns in the IoT domain. Digital Twin (DT), proves beneficial in addressing uncertain crises and data security issues by creating a virtual replica that simulates various factors, including traffic trajectories, city policies, and vehicle utilization. However, the effectiveness of a V-IoT DT system heavily relies on the collection of long-term and high-quality data to make appropriate decisions. This paper introduces a Hierarchical Federated Learning (HFL) based anomaly detection model for V-IoT, aiming to enhance the accuracy of the model. Our proposed model integrates both DT and HFL approaches to create a comprehensive system for detecting malicious activities using an anomaly detection model. Additionally, real-world V-IoT use case scenarios are presented to demonstrate the application of the proposed model. |
| 2023-07-25 | Keck Near-Infrared Detections of Mab and Perdita | Edward M. Molter et.al. | 2307.13773v1 | null | We report the first near-infrared detection of Uranus's tiny moon Mab, the presumed source of the blue and diffuse |
| 2023-07-25 | ChildGAN: Large Scale Synthetic Child Facial Data Using Domain Adaptation in StyleGAN | Muhammad Ali Farooq et.al. | 2307.13746v1 | null | In this research work, we proposed a novel ChildGAN, a pair of GAN networks for generating synthetic boys and girls facial data derived from StyleGAN2. ChildGAN is built by performing smooth domain transfer using transfer learning. It provides photo-realistic, high-quality data samples. A large-scale dataset is rendered with a variety of smart facial transformations: facial expressions, age progression, eye blink effects, head pose, skin and hair color variations, and variable lighting conditions. The dataset comprises more than 300k distinct data samples. Further, the uniqueness and characteristics of the rendered facial features are validated by running different computer vision application tests which include CNN-based child gender classifier, face localization and facial landmarks detection test, identity similarity evaluation using ArcFace, and lastly running eye detection and eye aspect ratio tests. The results demonstrate that synthetic child facial data of high quality offers an alternative to the cost and complexity of collecting a large-scale dataset from real children. |
| 2023-07-25 | The GMRT archive atomic gas survey -- II. Mass modelling and dark matter halo properties across late-type spirals | Prerana Biswas et.al. | 2307.13738v1 | null | Studying the kinematics and mass modelling of galaxies from HI 21 cm data provides valuable insights into the properties of both the baryonic components and the dark matter halo in nearby galaxies. Despite many observational studies, mass modelling of galaxies remains challenging due to different limitations. For example, most of the previous studies involving mass modelling are based on rotation curves derived from two-dimensional velocity fields from HI or H$\alpha$ spectroscopic observation which are often affected by beam smearing and projection effect. However, kinematic modelling done by fitting the "Tilted ring model" to three-dimensional data cube is not affected by these issues. In this study, we present and compare 3D kinematic modelling of a pilot sample of eleven galaxies from the GMRT archive atomic gas survey (GARCIA) using two different publicly available pipelines. We model the observed HI rotation curve using 3.6 $\mu$m infrared data and SDSS r-band data for stellar contribution, HI surface density profile for gas, and Navarro-Frenk-White (NFW) profile for dark matter halo; and employ the Markov Chain Monte Carlo (MCMC) optimization method for parameter estimation. Further, to validate our analysis, we revisit important scaling relations, e.g., the M${gas}$-M${star}$ relation, M${star}$-M${halo}$ relation, M${gas}$-M${halo}$ relation and Baryonic Tully-Fisher relation (BTFR). The scaling relations from our analysis are broadly consistent with that reported in the literature. A larger sample of galaxies from GARCIA in the near future will allow studying these scaling relations in greater details. |
| 2023-07-25 | Strong generation & (co)ghost index for module categories | Pat Lank et.al. | 2307.13675v1 | null | This work is concerned with both strong generation and (co)ghost index in the module category of a commutative noetherian ring. A sufficiency criterion is established for such rings to admit strong generators in their module category, and as a consequence, it answers affirmatively to a question of Iyengar and Takahashi. Moreover, it is shown that any noetherian quasi-excellent ring of finite krull dimension admits strong generators in their module category. Lastly, a local-to-global principle is established for (co)ghost index in the module category, and explicit computations are made. |
| 2023-07-25 | A class of rotating metrics in the presence of a scalar field | Behrouz Mirza et.al. | 2307.13588v1 | null | We consider a class of three parameter static and axially symmetric metrics that reduce to the Janis-Newman-Winicour (JNW) and $ \gamma$-metrics in certain limits of the parameters. We obtain rotating form of the metrics that are asymptotically flat, stationary and axisymmetric. In certain values of the parameters, the solutions represent the rotating JNW metric, rotating $ \gamma$-metric and Bogush-Gal'tsov (BG) metric. The singularities of rotating metrics are investigated. Using the light-ring method, we obtain the quasi normal modes (QNMs) related to rotating metrics in the eikonal limit. Finally, we investigate the precession frequency of a test gyroscope in the presence of the rotating metrics. |
| 2023-07-25 | The homotopy category of monomorphisms between projective modules | Abdolnaser Bahlekeh et.al. | 2307.13559v1 | null | Let |
| 2023-07-25 | Perturbed Block Toeplitz matrices and the non-Hermitian skin effect in dimer systems of subwavelength resonators | Habib Ammari et.al. | 2307.13551v1 | null | The aim of this paper is fourfold: (i) to obtain explicit formulas for the eigenpairs of perturbed tridiagonal block Toeplitz matrices; (ii) to make use of such formulas in order to provide a mathematical justification of the non-Hermitian skin effect in dimer systems by proving the condensation of the system's bulk eigenmodes at one of the edges of the system; (iii) to show the topological origin of the non-Hermitian skin effect for dimer systems and (iv) to prove localisation of the interface modes between two dimer structures with non-Hermitian gauge potentials of opposite signs based on new estimates of the decay of the entries of the eigenvectors of block matrices with mirrored blocks. |
| 2023-07-25 | Earth-based Stellar Occultation Predictions for Jupiter, Saturn, Uranus, Neptune, Titan, and Triton: 2023-2050 | Richard G. French et.al. | 2307.13530v1 | null | In support of studies of decadal-timescale evolution of outer solar system atmospheres and ring systems, we present detailed Earth-based stellar occultation predictions for Jupiter, Saturn, Uranus, Neptune, Titan, and Triton for 2023-2050, based on the Gaia DR3 star catalog and near-IR K-band photometry from the 2MASS catalog. We tabulate the number of observable events by year and magnitude interval, reflecting the highly variable frequency of high-SNR events depending on the target's path relative to the star-rich regions of the Milky Way. We identify regions on Earth where each event is potentially observable, and for atmospheric occultations, we determine the latitude of the ingress and egress events. For Saturn, Uranus, and Neptune, we also compute the predicted ring occultation event times. We present representative subsets of the predicted events and highlights particularly promising events. Jupiter occultations with K $\leq$7 occur at a cadence of about one per year, with bright events at higher frequency in 2031 and 2043. Saturn occultations are much rarer, with only two predicted events with K $\leq$5 in 2032 and 2047. Ten Uranus ring occultations are predicted with K$\leq$10 for the period 2023 to 2050. Neptune traverses star-poor regions of the sky until 2068, resulting in only 13 predicted occultations for K$\leq$12 between 2023 and 2050. Titan has several high-SNR events between 2029--2031, whereas Triton is limited to a total of 22 occultations with K$\leq$15 between 2023 and 2050. Details of all predicted events are included in the Supplementary Online Material. |
| 2023-07-25 | XMM-Newton and INTEGRAL observations of the bright GRB 230307A : vanishing of the local absorption and limits on the dust in the Magellanic Bridge | Sandro Mereghetti et.al. | 2307.13514v1 | null | 230307A is the second brightest gamma ray burst detected in more than 50 years of observations and is located in the direction of the Magellanic Bridge. Despite its long duration, it is most likely the result of the compact merger of a binary ejected from a galaxy in the local universe (redshift z=0.065). Our XMM-Newton observation of its afterglow at 4.5 days shows a power-law spectrum with photon index |
| 2023-07-25 | Good codes from twisted group algebras | Samir Assuena et.al. | 2307.13507v1 | null | In this paper, we shall give an explicit proof that constacyclic codes over finite commutative rings can be realized as ideals in some twisted group rings. Also, we shall study isometries between those codes and, finally, we shall study k-Galois LCD constacyclic codes over finite fields. In particular, we shall characterize constacyclic LCD codes with respect to Euclidean inner product in terms of its idempotent generators and the classical involution using the twisted group algebras structures and find some good LCD codes. |
| Publish Date | Title | Authors | Code | Abstract | |
|---|---|---|---|---|---|
| 2023-07-27 | Exponential speedups for quantum walks in random hierarchical graphs | Shankar Balasubramanian et.al. | 2307.15062v1 | null | There are few known exponential speedups for quantum algorithms and these tend to fall into even fewer families. One speedup that has mostly resisted generalization is the use of quantum walks to traverse the welded-tree graph, due to Childs, Cleve, Deotto, Farhi, Gutmann, and Spielman. We show how to generalize this to a large class of hierarchical graphs in which the vertices are grouped into ``supervertices'' which are arranged according to a |
| 2023-07-27 | IPv6 Hitlists at Scale: Be Careful What You Wish For | Erik Rye et.al. | 2307.15057v1 | null | Today's network measurements rely heavily on Internet-wide scanning, employing tools like ZMap that are capable of quickly iterating over the entire IPv4 address space. Unfortunately, IPv6's vast address space poses an existential threat for Internet-wide scans and traditional network measurement techniques. To address this reality, efforts are underway to develop ``hitlists'' of known-active IPv6 addresses to reduce the search space for would-be scanners. As a result, there is an inexorable push for constructing as large and complete a hitlist as possible. This paper asks: what are the potential benefits and harms when IPv6 hitlists grow larger? To answer this question, we obtain the largest IPv6 active-address list to date: 7.9 billion addresses, 898 times larger than the current state-of-the-art hitlist. Although our list is not comprehensive, it is a significant step forward and provides a glimpse into the type of analyses possible with more complete hitlists. We compare our dataset to prior IPv6 hitlists and show both benefits and dangers. The benefits include improved insight into client devices (prior datasets consist primarily of routers), outage detection, IPv6 roll-out, previously unknown aliased networks, and address assignment strategies. The dangers, unfortunately, are severe: we expose widespread instances of addresses that permit user tracking and device geolocation, and a dearth of firewalls in home networks. We discuss ethics and security guidelines to ensure a safe path towards more complete hitlists. |
| 2023-07-27 | Autocalibrating Gaze Tracking: A Demonstration through Gaze Typing | Akanksha Saran et.al. | 2307.15039v1 | null | Miscalibration of gaze tracking devices and the resulting need for repeat calibration are a significant barrier to use. As devices miscalibrate, people tend to auto-correct by gazing at neighboring targets, which makes it difficult to detect miscalibration from eye signals. To address this problem, we provide a novel and simple insight for autocalibrating eye trackers during gaze typing: the eyes are used as both input (i.e. typing) and output (i.e. reading) signals, but auto-correction by users only occurs when eye gaze is functioning as input. Thus, output eye gaze signals during reading can help systems detect the miscalibration offset and enable autocalibration. To demonstrate the potential for this type of approach, we designed and built an auto-calibration system for gaze typing and ran a user study with 15 able-bodied participants. Results from our user study suggest that such an implicit approach to autocalibration can significantly improve typing speed and overall user experience for gaze typing interfaces. Insights from our work are applicable to a broad set of gaze tracking technologies and may help create more seamless user experiences in a variety of domains. |
| 2023-07-27 | Dissipation-enabled bosonic Hamiltonian learning via new information-propagation bounds | Tim Möbus et.al. | 2307.15026v1 | null | Reliable quantum technology requires knowledge of the dynamics governing the underlying system. This problem of characterizing and benchmarking quantum devices or experiments in continuous time is referred to as the Hamiltonian learning problem. In contrast to multi-qubit systems, learning guarantees for the dynamics of bosonic systems have hitherto remained mostly unexplored. For |
| 2023-07-27 | Samplable Anonymous Aggregation for Private Federated Data Analysis | Kunal Talwar et.al. | 2307.15017v1 | null | We revisit the problem of designing scalable protocols for private statistics and private federated learning when each device holds its private data. Our first contribution is to propose a simple primitive that allows for efficient implementation of several commonly used algorithms, and allows for privacy accounting that is close to that in the central setting without requiring the strong trust assumptions it entails. Second, we propose a system architecture that implements this primitive and perform a security analysis of the proposed system. |
| 2023-07-27 | FLiCR: A Fast and Lightweight LiDAR Point Cloud Compression Based on Lossy RI | Jin Heo et.al. | 2307.15005v1 | null | Light detection and ranging (LiDAR) sensors are becoming available on modern mobile devices and provide a 3D sensing capability. This new capability is beneficial for perceptions in various use cases, but it is challenging for resource-constrained mobile devices to use the perceptions in real-time because of their high computational complexity. In this context, edge computing can be used to enable LiDAR online perceptions, but offloading the perceptions on the edge server requires a low-latency, lightweight, and efficient compression due to the large volume of LiDAR point clouds data. This paper presents FLiCR, a fast and lightweight LiDAR point cloud compression method for enabling edge-assisted online perceptions. FLiCR is based on range images (RI) as an intermediate representation (IR), and dictionary coding for compressing RIs. FLiCR achieves its benefits by leveraging lossy RIs, and we show the efficiency of bytestream compression is largely improved with quantization and subsampling. In addition, we identify the limitation of current quality metrics for presenting the entropy of a point cloud, and introduce a new metric that reflects both point-wise and entropy-wise qualities for lossy IRs. The evaluation results show FLiCR is more suitable for edge-assisted real-time perceptions than the existing LiDAR compressions, and we demonstrate the effectiveness of our compression and metric with the evaluations on 3D object detection and LiDAR SLAM. |
| 2023-07-27 | Unpinned Dirac-Fermions in Carbon-Phosphorous-Arsenic Based Ternary Monolayer | Amrendra Kumar et.al. | 2307.15001v1 | null | We predict energetically and dynamically stable ternary Carbon-Phosphorous-Arsenic (CPAs2) monolayers in buckled geometric structure by employing density functional theory based calculations. We consider three different symmetric configurations, namely, inversion (i), mirror (m) and rotational (r). The low-energy dispersions in electronic band structure and density of states (DOS) around the Fermi level contain two contrasting features: (a) parabolic dispersion around highly symmetric Gamma point with a step function in DOS due to nearly-free-particle-like Schroedinger-Fermions and (b) linear dispersion around highly symmetric K point with linear DOS due to massless Dirac-Fermions for i-CPAs2 monolayer. The step function in DOS is a consequence of two-dimensionality of the system in which the motion of nearly-free-particles is confined. However, a closer look at (b) reveals that the ternary monolayers possess distinct characters, namely (i) massless-gapless, (ii) slightly massive-gapped and (iii) unpinned massless-gapless Dirac-Fermions for i, m and r-CPAs2 configurations respectively. Thus, the nature of states around the Fermi level depends crucially on the symmetry of systems. In addition, we probe the influence of mechanical strain on the properties of CPAs2 monolayer. The results indicate that the characteristic dispersions of (a) and (b) move in opposite directions in energy which leads to a metal-to-semimetal transition in i and r-CPAs2 configurations, for a few percentages of tensile strain. On the other hand, a strain induced metal-to-semiconductor transition is observed in m-CPAs2 configuration with a tunable energy band gap. Interestingly, unlike graphene, the Dirac cones can be unpinned from highly symmetric K (and K') point, but they are restricted to move along the edges (K-M'-K') of first Brillouin zone due to C2 symmetry in i and r-CPAs2 configurations. |
| 2023-07-27 | Decomposing and Routing Quantum Circuits Under Constraints for Neutral Atom Architectures | Natalia Nottingham et.al. | 2307.14996v1 | null | Quantum computing is in an era defined by rapidly evolving quantum hardware technologies, combined with persisting high gate error rates, large amounts of noise, and short coherence times. Overcoming these limitations requires systems-level approaches that account for the strengths and weaknesses of the underlying hardware technology. Yet few hardware-aware compiler techniques exist for neutral atom devices, with no prior work on compiling to the neutral atom native gate set. In particular, current neutral atom hardware does not support certain single-qubit rotations via local addressing, which often requires the circuit to be decomposed into a large number of gates, leading to long circuit durations and low overall fidelities. We propose the first compiler designed to overcome the challenges of limited local addressibility in neutral atom quantum computers. We present algorithms to decompose circuits into the neutral atom native gate set, with emphasis on optimizing total pulse area of global gates, which dominate gate execution costs in several current architectures. Furthermore, we explore atom movement as an alternative to expensive gate decompositions, gaining immense speedup with routing, which remains a huge overhead for many quantum circuits. Our decomposition optimizations result in up to ~3.5x and ~2.9x speedup in time spent executing global gates and time spent executing single-qubit gates, respectively. When combined with our atom movement routing algorithms, our compiler achieves up to ~10x reduction in circuit duration, with over ~2x improvement in fidelity. We show that our compiler strategies can be adapted for a variety of hardware-level parameters as neutral atom technology continues to develop. |
| 2023-07-27 | A chemical reaction network implementation of a Maxwell demon | Massimo Bilancioni et.al. | 2307.14994v1 | null | We study an autonomous model of a Maxwell demon that works by rectifying thermal fluctuations of chemical reactions. It constitutes the chemical analog of a recently studied electronic demon. We characterize its scaling behavior in the macroscopic limit, its performances, and the impact of potential internal delays. We obtain analytical expressions for all quantities of interest, namely, the generated reverse chemical current, the output power, the transduction efficiency, and the correlations between the numbers of molecules. Due to a bound on the nonequilibrium response of its chemical reaction network, we find that, contrary to the electronic case, there is no way for the Maxwell demon to generate a finite output in the macroscopic limit. Finally, we analyze the information thermodynamics of the Maxwell demon from a bipartite perspective. In the limit of a fast demon, the information flow is obtained, its pattern in the state space is discussed, and the behavior of the partial efficiencies related to the measurement and the feedback processes is examined. |
| 2023-07-27 | Super-resolution enabled widefield quantum diamond microscopy | Feng Xu et.al. | 2307.14990v1 | null | Widefield quantum diamond microscopy (WQDM) based on Kohler-illumination has been widely adopted in the field of quantum sensing, however, practical applications are still limited by issues such as unavoidable photodamage and unsatisfied spatial-resolution. Here, we design and develop a super-resolution enabled WQDM using a digital micromirror device (DMD)-based structured illumination microscopy. With the rapidly programmable illumination patterns, we have firstly demonstrated how to mitigate phototoxicity when imaging nanodiamonds in cell samples. As a showcase, we have performed the super-resolved quantum sensing measurements of two individual nanodiamonds not even distinguishable with conventional WQDM. The DMD-powered WQDM presents not only excellent compatibility with quantum sensing solutions, but also strong advantages in high imaging speed, high resolution, low phototoxicity, and enhanced signal-to-background ratio, making it a competent tool to for applications in demanding fields such as biomedical science. |
| 2023-07-27 | Super-tetragonal Sr4Al2O7: a versatile sacrificial layer for high-integrity freestanding oxide membranes | Jinfeng Zhang et.al. | 2307.14966v1 | null | Identifying a suitable water-soluble sacrificial layer is crucial to fabricating large-scale freestanding oxide membranes, which stimulates intriguing functionalities and enables novel integrations with semiconductor technologies. In this work, we introduce a new water-soluble sacrificial layer, "super-tetragonal" Sr4Al2O7 (SAOT). Its unique atomic structure ensures a coherent growth of perovskite ABO3/SAOT heterostructures, effectively inhibiting crack formation in the water-released membranes. For various non-ferroelectric oxide membranes with lattice constants ranging from 3.85 to 4.04 A, the crack-free areas can span up to millimeter-scale. The high water-solubility of SAOT shortens the exfoliation duration to a few minutes only. Our findings highlight the SAOT as an effective and versatile sacrificial layer for freestanding oxide membranes with superior integrity, crystallinity, and functionalities, further promoting their potential for innovative device applications. |
| 2023-07-27 | Interlayer coupling driven high-temperature superconductivity in La$_3$Ni$_2$O$_7$ under pressure | Chen Lu et.al. | 2307.14965v1 | null | The newly discovered high-temperature superconductivity in La$3$Ni$2$O$7$ under pressure has attracted a great deal of interests. The essential ingredient characterizing the electronic properties is the bilayer NiO$2$ planes, in which the two layers couple with each other from the bonding of Ni-$3d{z^2}$ orbital through the intermediate oxygen-atoms. In the strong coupling limit, an intralayer antiferromagnetic spin-exchange interaction $J{\parallel}$ between $3d{x^2-y^2}$ orbitals and an interlayer one $J{\perp}$ between |
| 2023-07-27 | Probing an ultralight QCD axion with electromagnetic quadratic interaction | Hyungjin Kim et.al. | 2307.14962v1 | null | The axion-gluon coupling is the defining feature of the QCD axion. This feature induces additional and qualitatively different interactions of the axion with standard model particles -- quadratic couplings. Previously, hadronic quadratic couplings have been studied and experimental implications have been explored especially in the context of atomic spectroscopy and interferometry. We investigate additional quadratic couplings to the electromagnetic field and electron mass. These electromagnetic quadratic couplings are generated at the loop level from threshold corrections and are expected to be present in the absence of fine-tuning. While they are generally loop-suppressed compared to the hadronic ones, they open up new ways to search for the QCD axion, for instance via optical atomic clocks. Moreover, due to the velocity spread of the dark matter field, the quadratic nature of the coupling leads to low-frequency fluctuations in any detector setup. These distinctive low-frequency fluctuations offer a way to search for heavier axions. We provide an analytic expression for the power spectral density of this low-frequency background and briefly discuss experimental strategies for a low-frequency background search. |
| 2023-07-27 | Confronting axial-vector form factor from lattice QCD with MINERvA antineutrino-proton data | Oleksandr Tomalak et.al. | 2307.14920v1 | null | We compare recent MINERvA antineutrino-hydrogen charged-current measurements to phenomenological predictions of the axial-vector form factor based on fits to all available electron scattering and deuterium bubble-chamber data and to representative lattice-QCD (LQCD) determination by the PNDME Collaboration. While there is |
| 2023-07-27 | Contribution of hadronic light-by-light scattering to the hyperfine structure of muonium | V. I. Korobov et.al. | 2307.14916v1 | null | The contribution of hadronic scattering of light-by-light to the hyperfine structure of muonium is calculated using experimental data on the transition form factors of two photons into a hadron. The amplitudes of interaction between a muon and an electron with horizontal and vertical exchange are constructed. The contributions due to the exchange of pseudoscalar, axial vector, scalar and tensor mesons are taken into account. |
| 2023-07-27 | Anisotropic multiband superconductivity in 2M-WS$_{2}$ probed by controlled disorder | Sunil Ghimire et.al. | 2307.14891v1 | null | The intrinsically superconducting Dirac semimetal 2M-WS${2}$ is a promising candidate to realize proximity-induced topological superconductivity in its protected surface states. A precise characterization of the bulk superconducting state is essential for understanding the nature of surface superconductivity in the system. Here, we perform a detailed experimental study of the temperature and nonmagnetic disorder dependence of the London penetration depth $\lambda$, the upper critical field $H{c2}$, and the superconducting transition temperature |
| 2023-07-27 | Spectrum of the hole excitation in spin-orbit Mott insulator Na$_2$IrO$_3$ | Wei Wang et.al. | 2307.14885v1 | null | We study the motion of a hole with internal degrees of freedom, introduced to the zigzag magnetic ground state of Na$_2$IrO$_3$, by using the self-consistent Born approximation. We find that the low, intermediate, and high-energy spectra are primarily attributed to the singlet, triplet, and quintet hole contributions, respectively. The spectral functions exhibit distinct features such as the electron-like dispersion of low-energy states near the |
| 2023-07-27 | Don't Shoot the Messenger: Localization Prevention of Satellite Internet Users | David Koisser et.al. | 2307.14879v1 | null | Satellite Internet plays an increasingly important role in geopolitical conflicts. This notion was affirmed in the Ukrainian conflict escalating at the beginning of 2022, with the large-scale deployment of the Starlink satellite Internet service which consequently demonstrated the strategic importance of a free flow of information. Aside from military use, many citizens publish sensitive information on social media platforms to influence the public narrative. However, the use of satellite communication has proven to be dangerous, as the signals can be monitored by other satellites and used to triangulate the source on the ground. Unfortunately, the targeted killings of journalists have shown this threat to be effective. While the increasing deployment of satellite Internet systems gives citizens an unprecedented mouthpiece in conflicts, protecting them against localization is an unaddressed problem. To address this threat, we present AnonSat, a novel scheme to protect satellite Internet users from triangulation. AnonSat works with cheap off-the-shelf devices, leveraging long-range wireless communication to span a local network among satellite base stations. This allows rerouting users' communication to other satellite base stations, some distance away from each user, thus, preventing their localization. AnonSat is designed for easy deployment and usability, which we demonstrate with a prototype implementation. Our large-scale network simulations using real-world data sets show the effectiveness of AnonSat in various practical settings. |
| 2023-07-27 | Search for Light Dark Matter with accelerator and direct detection experiments: comparison and complementarity of recent results | S. ~N. ~Gninenko et.al. | 2307.14865v1 | null | We discuss the most sensitive constraints on Light Dark Matter (LDM) from accelerator experiments NA64 and BaBar and compare it with recent results from direct searches at XENON1T, DAMIC-M, SuperCDMS, and DarkSide-50. We show that for the dark photon ( |
| 2023-07-27 | Comparative Evaluation of Digital and Analog Chest Radiographs to Identify Tuberculosis using Deep Learning Model | Subhankar Chattoraj et.al. | 2307.14859v1 | null | Purpose:Chest X-ray (CXR) is an essential tool and one of the most prescribed imaging to detect pulmonary abnormalities, with a yearly estimate of over 2 billion imaging performed worldwide. However, the accurate and timely diagnosis of TB remains an unmet goal. The prevalence of TB is highest in low-middle-income countries, and the requirement of a portable, automated, and reliable solution is required. In this study, we compared the performance of DL-based devices on digital and analog CXR. The evaluated DL-based device can be used in resource-constraint settings. Methods: A total of 10,000 CXR DICOMs(.dcm) and printed photos of the films acquired with three different cellular phones - Samsung S8, iPhone 8, and iPhone XS along with their radiological report were retrospectively collected from various sites across India from April 2020 to March 2021. Results: 10,000 chest X-rays were utilized to evaluate the DL-based device in identifying radiological signs of TB. The AUC of qXR for detecting signs of tuberculosis on the original DICOMs dataset was 0.928 with a sensitivity of 0.841 at a specificity of 0.806. At an optimal threshold, the difference in the AUC of three cellular smartphones with the original DICOMs is 0.024 (2.55%), 0.048 (5.10%), and 0.038 (1.91%). The minimum difference demonstrates the robustness of the DL-based device in identifying radiological signs of TB in both digital and analog CXR. |
| 2023-07-27 | Thermal one-point functions: CFT's with fermions, large |
Justin R. David et.al. | 2307.14847v1 | null | We apply the OPE inversion formula on thermal two-point functions of fermions to obtain thermal one-point function of fermion bi-linears appearing in the corresponding OPE. We primarily focus on the OPE channel which contains the stress tensor of the theory. We apply our formalism to the mean field theory of fermions and verify that the inversion formula reproduces the spectrum as well as their corresponding thermal one-point functions. We then examine the large |
| 2023-07-27 | Semi-Grant-Free Orthogonal Multiple Access with Partial-Information for Short Packet Transmissions | Alberto Rech et.al. | 2307.14846v1 | null | Next-generation internet-of-things (IoT) networks require extremely low latency, complexity, and collision probability. We introduce the novel partial-information multiple access (PIMA) scheme, a semi-grant-free (GF) coordinated random access (RA) protocol for short packet transmission, with the aim of reducing the latency and packet loss of traditional multiple access schemes, as well as more recent preamble-based schemes. With PIMA, the base station (BS) acquires partial information on instantaneous traffic conditions in the partial information acquisition (PIA) sub-frame, estimating the number of active devices, i.e., having packets waiting for transmission in their queue. Based on this estimate, the BS chooses both the total number of slots to be allocated in the data transmission (DT) sub-frame and the respective user-to-slot assignment. Although collisions may still occur due to multiple users assigned to the same slot, they are drastically reduced with respect to the slotted ALOHA (SALOHA) scheme, while achieving lower latency than both time-division multiple-access (TDMA) and preamble-based protocols, due to the extremely reduced overhead of the PIA sub-frame. Finally, we analyze and assess the performance of PIMA under various activation statistics, proving the robustness of the proposed solution to the intensity of traffic, also with burst traffic. |
| 2023-07-27 | Frustration-Induced Superconductivity in the |
Changkai Zhang et.al. | 2307.14835v1 | null | The two-dimensional (2D) Hubbard model is widely believed to capture key ingredients of high-$T_c$ superconductivity in cuprate materials. However, compelling evidence remains elusive. In particular, various magnetic orders may emerge as strong competitors of superconducting orders. Here, we study the ground state properties of the doped 2D |
| 2023-07-27 | Disturbance Preview for Nonlinear Model Predictive Trajectory Tracking of Underwater Vehicles in Wave Dominated Environments | Kyle L. Walker et.al. | 2307.14834v1 | null | Operating in the near-vicinity of marine energy devices poses significant challenges to the control of underwater vehicles, predominantly due to the presence of large magnitude wave disturbances causing hazardous state perturbations. Approaches to tackle this problem have varied, but one promising solution is to adopt predictive control methods. Given the predictable nature of ocean waves, the potential exists to incorporate disturbance estimations directly within the plant model; this requires inclusion of a wave predictor to provide online preview information. To this end, this paper presents a Nonlinear Model Predictive Controller with an integrated Deterministic Sea Wave Predictor for trajectory tracking of underwater vehicles. State information is obtained through an Extended Kalman Filter, forming a complete closed-loop strategy and facilitating online wave load estimations. The strategy is compared to a similar feed-forward disturbance mitigation scheme, showing mean performance improvements of 51% in positional error and 44.5% in attitude error. The preliminary results presented here provide strong evidence of the proposed method's high potential to effectively mitigate disturbances, facilitating accurate tracking performance even in the presence of high wave loading. |
| 2023-07-27 | Test of $^{116}$CdWO$_4$ and Li$_2$MoO$_4$ scintillating bolometers in the CROSS underground facility with upgraded detector suspension | A. Ahmine et.al. | 2307.14831v1 | null | In preparation to the CROSS |
| 2023-07-27 | Understanding the polaritonic ground state in cavity quantum electrodynamics | Tor S. Haugland et.al. | 2307.14822v1 | null | Molecular polaritons arise when molecules interact so strongly with light that they become entangled with each other. This light-matter hybridization alters the chemical and physical properties of the molecular system and allows chemical reactions to be controlled without the use of external fields. We investigate the impact of strong light-matter coupling on the electronic structure using perturbative approaches and demonstrate that Rayleigh-Schr"odinger perturbation theory can reproduce the ground state energies in optical cavities to comparable accuracy as ab initio cavity quantum electrodynamics methodologies for currently relevant coupling strengths. The method is effective in both low and high cavity frequency regimes and straightforward to implement via response functions. Furthermore, we establish simple relations between cavity-induced intermolecular forces and van der Waals forces. These findings provide valuable insight into the manipulation of ground-state polaritonic energy landscapes, shedding light on the systems and conditions in which modifications can be achieved. |
| 2023-07-27 | Experimental validation of particle-in-cell/Monte Carlo collisions simulations in low-pressure neon capacitively coupled plasmas | Chan-Won Park et.al. | 2307.14821v1 | null | Plasma simulations are powerful tools for understanding fundamental plasma science phenomena and for process optimization in applications. To ensure their quantitative accuracy, they must be validated against experiments. In this work, such an experimental validation is performed for a 1d3v particle-in-cell simulation complemented with the Monte Carlo treatment of collision processes of a capacitively coupled radio frequency plasma driven at 13.56 MHz and operated in neon gas. In a geometrically symmetric reactor the electron density in the discharge center and the spatio-temporal distribution of the electron impact excitation rate from the ground into the Ne 2p$_1$ state are measured by a microwave cutoff probe and phase resolved optical emission spectroscopy, respectively. The measurements are conducted for electrode gaps between 50 mm and 90 mm, neutral gas pressures between 20 mTorr and 50 mTorr, and peak-to-peak values of the driving voltage waveform between 250 V and 650 V. Simulations are performed under identical discharge conditions. In the simulations, various combinations of surface coefficients characterising the interactions of electrons and heavy particles with the anodized aluminium electrode surfaces are adopted. We find, that the simulations using a constant effective heavy particle induced secondary electron emission coefficient of 0.3 and a realistic electron-surface interaction model (which considers energy-dependent and material specific elastic and inelastic electron reflection, as well as the emission of true secondary electrons from the surface) yield results which are in good quantitative agreement with the experimental data. |
| 2023-07-27 | High-temperature superconductivity with zero-resistance and strange metal behavior in La${3}$Ni${2}$O$_{7}$ | Yanan Zhang et.al. | 2307.14819v1 | null | Recently signatures of superconductivity were observed close to 80 K in La${3}$Ni${2}$O${7}$ under pressure [1]. This discovery positions La${3}$Ni${2}$O${7}$ as the first bulk nickelate with high-temperature superconductivity, but the lack of zero resistance presents a significant drawback for validating the findings. Here we show that La${3}$Ni${2}$O${7}$ exhibits zero resistance upon applying hydrostatic pressure up to 29.2~GPa using a liquid pressure medium. We find that La${3}$Ni${2}$O${7}$ remains metallic under applied pressures, suggesting the absence of a metal-insulator transition proximate to the superconductivity. Analysis of the normal state |
| 2023-07-27 | Polarization properties of X-ray tubes used for Imaging X-ray Polarimetry Explorer calibration | Ajay Ratheesh et.al. | 2307.14814v1 | null | In this work, we measured the polarization properties of the X-rays emitted from the X-ray tubes, which were used during the calibration of the instrument onboard Imaging X-ray Polarimetry Explorer (IXPE). X-ray tubes are used as a source of unpolarized X-rays to calibrate the response of the gas pixel detectors to unpolarized radiation. However, even though the characteristic fluorescent emission lines are unpolarized, continuum bremsstrahlung emission can be polarized based on the geometry of the accelerated electrons and emitted photons. Hence, characterizing the contribution of polarized X-rays from bremsstrahlung emission is of interest, also for future measurements. We find that when accelerated electrons are parallel to the emitted photons, the bremsstrahlung emission is unpolarized, and when they are perpendicular, the polarization increases with energy, as expected from the theoretical predictions. A comparison with the theoretical predictions is also shown. |
| 2023-07-27 | Understanding magnetoelectric switching in BiFeO$_3$ thin films | Natalya S. Fedorova et.al. | 2307.14789v1 | null | In this work we use a phenomenological theory of ferroelectric switching in BiFeO$_3$ thin films to uncover the mechanism of the two-step process that leads to the reversal of the weak magnetization of these materials. First, we introduce a realistic model of a BiFeO$_3$ film, including the Landau energy of isolated domains as well as the constraints that account for the presence of the substrate and the multidomain configuration found experimentally. We use this model to obtain statistical information about the switching behavior - by running dynamical simulations based on the Landau-Khalatnikov time-evolution equation, including thermal fluctuations - and we thus identify the factors that drive the two-step polarization reversal observed in the experiments. Additionally, we apply our model to test potential strategies for optimizing the switching characteristics. |
| Publish Date | Title | Authors | Code | Abstract | |
|---|---|---|---|---|---|
| 2023-07-25 | Gait Cycle-Inspired Learning Strategy for Continuous Prediction of Knee Joint Trajectory from sEMG | Xueming Fu et.al. | 2307.13209v1 | null | Predicting lower limb motion intent is vital for controlling exoskeleton robots and prosthetic limbs. Surface electromyography (sEMG) attracts increasing attention in recent years as it enables ahead-of-time prediction of motion intentions before actual movement. However, the estimation performance of human joint trajectory remains a challenging problem due to the inter- and intra-subject variations. The former is related to physiological differences (such as height and weight) and preferred walking patterns of individuals, while the latter is mainly caused by irregular and gait-irrelevant muscle activity. This paper proposes a model integrating two gait cycle-inspired learning strategies to mitigate the challenge for predicting human knee joint trajectory. The first strategy is to decouple knee joint angles into motion patterns and amplitudes former exhibit low variability while latter show high variability among individuals. By learning through separate network entities, the model manages to capture both the common and personalized gait features. In the second, muscle principal activation masks are extracted from gait cycles in a prolonged walk. These masks are used to filter out components unrelated to walking from raw sEMG and provide auxiliary guidance to capture more gait-related features. Experimental results indicate that our model could predict knee angles with the average root mean square error (RMSE) of 3.03(0.49) degrees and 50ms ahead of time. To our knowledge this is the best performance in relevant literatures that has been reported, with reduced RMSE by at least 9.5%. |
| 2023-07-20 | Analysis of the rate of force development reveals high neuromuscular fatigability in elderly patients with chronic kidney disease | Antoine Chatrenet et.al. | 2307.10691v1 | null | Background Chronic kidney disease (CKD) induces muscle wasting and a reduction in the maximum voluntary force (MVF). Little is known about the neuromuscular fatigability in CKD patients, defined as the reduction of muscle force capacities during exercise. Neuromuscular fatigability is a crucial physical parameter of the daily living. The quantification of explosive force has been shown to be a sensitive means to assess neuromuscular fatigability. Thus, our study used explosive force estimates to assess neuromuscular fatigability in elderly CKD patients. Methods Inclusion criteria for CKD patients were age |
| 2023-07-13 | Combining Vision and EMG-Based Hand Tracking for Extended Reality Musical Instruments | Max Graf et.al. | 2307.10203v1 | null | Hand tracking is a critical component of natural user interactions in extended reality (XR) environments, including extended reality musical instruments (XRMIs). However, self-occlusion remains a significant challenge for vision-based hand tracking systems, leading to inaccurate results and degraded user experiences. In this paper, we propose a multimodal hand tracking system that combines vision-based hand tracking with surface electromyography (sEMG) data for finger joint angle estimation. We validate the effectiveness of our system through a series of hand pose tasks designed to cover a wide range of gestures, including those prone to self-occlusion. By comparing the performance of our multimodal system to a baseline vision-based tracking method, we demonstrate that our multimodal approach significantly improves tracking accuracy for several finger joints prone to self-occlusion. These findings suggest that our system has the potential to enhance XR experiences by providing more accurate and robust hand tracking, even in the presence of self-occlusion. |
| 2023-07-08 | A Physics-Informed Low-Shot Learning For sEMG-Based Estimation of Muscle Force and Joint Kinematics | Yue Shi et.al. | 2307.05361v1 | null | Muscle force and joint kinematics estimation from surface electromyography (sEMG) are essential for real-time biomechanical analysis of the dynamic interplay among neural muscle stimulation, muscle dynamics, and kinetics. Recent advances in deep neural networks (DNNs) have shown the potential to improve biomechanical analysis in a fully automated and reproducible manner. However, the small sample nature and physical interpretability of biomechanical analysis limit the applications of DNNs. This paper presents a novel physics-informed low-shot learning method for sEMG-based estimation of muscle force and joint kinematics. This method seamlessly integrates Lagrange's equation of motion and inverse dynamic muscle model into the generative adversarial network (GAN) framework for structured feature decoding and extrapolated estimation from the small sample data. Specifically, Lagrange's equation of motion is introduced into the generative model to restrain the structured decoding of the high-level features following the laws of physics. And a physics-informed policy gradient is designed to improve the adversarial learning efficiency by rewarding the consistent physical representation of the extrapolated estimations and the physical references. Experimental validations are conducted on two scenarios (i.e. the walking trials and wrist motion trials). Results indicate that the estimations of the muscle forces and joint kinematics are unbiased compared to the physics-based inverse dynamics, which outperforms the selected benchmark methods, including physics-informed convolution neural network (PI-CNN), vallina generative adversarial network (GAN), and multi-layer extreme learning machine (ML-ELM). |
| 2023-07-07 | An Improved Compound Gaussian Model for Bivariate Surface EMG Signals Related to Strength Training | Durgesh Kusuru et.al. | 2307.03403v1 | null | Recent literature suggests that the surface electromyography (sEMG) signals have non-stationary statistical characteristics specifically due to random nature of the covariance. Thus suitability of a statistical model for sEMG signals is determined by the choice of an appropriate model for describing the covariance. The purpose of this study is to propose a Compound-Gaussian (CG) model for multivariate sEMG signals in which latent variable of covariance is modeled as a random variable that follows an exponential model. The parameters of the model are estimated using the iterative Expectation Maximization (EM) algorithm. Further, a new dataset, electromyography analysis of human activities database 2 (EMAHA-DB2) is developed. Based on the model fitting analysis on the sEMG signals from EMAHA-DB2, it is found that the proposed CG model fits more closely to the empirical pdf of sEMG signals than the existing models. The proposed model is validated by visual inspection, further validated by matching central moments and better quantitative metrics in comparison with other models. The proposed compound model provides an improved fit to the statistical behavior of sEMG signals. Further, the estimate of rate parameter of the exponential model shows clear relation to the training weights. Finally, the average signal power estimates of the channels shows distinctive dependency on the training weights, the subject's training experience and the type of activity. |
| 2023-06-29 | Labour Monitoring in Pregnant Women Using Phonocardiography, Electrocardiography and Electromyography Technique | Anushka Tiwari et.al. | 2306.17198v1 | null | Continuous monitoring of fetal and maternal vital signs, particularly during labor, can be critical for the child and mother's health. We present a novel wearable electronic system that measures, in real-time, maternal heart rate using phonocardiography (PCG) and Electrocardiography (ECG). Uterine contractions using electromyography (EMG). When in later stages we employed ECG technique for maternal heart rate monitoring. The heart rate is determined using moving average filters to remove noises in the signal and ACF(Autocorrelation Function) for determining periodicity. For UC monitoring we stick to the same EMG technique. We also tried employing EMG technique to monitor the Fetal Heart Rate(FHR). But, in later stages of this design, this idea was aborted as we concluded that it needs further research on pregnancy stages and would require more intricate sensor integration that might not be in our reach at the moment. The system is accurate, low-cost, and portable, so it can be deployed at primary healthcare centers in low-income countries. The system can also be used by women in the comfort of their homes. At the same time, the data collected is transferred to their doctor for analysis and diagnosis, which can bring a revolutionary change in the continuous monitoring of fetal wellbeing during labor. |
| 2023-06-22 | Influence of Force-Length Relationship and Task-Specific Constraints on Finger Force-Generating Capacities | Benjamin Goislard de Monsabert et.al. | 2306.12842v1 | null | Grip strength loss in extended and flexed wrist postures has been explained by reduced force-generating capacities of extrinsic finger flexor resulting from non-optimal length, owing to the force-length relationship. Recent works suggested that other muscles, especially wrist extensors, participate in this grip strength loss. The objective of this study was to clarify the role of the force-length relationship in finger force production. 18 participants performed maximal isometric finger force production during pinch grip (Pinch) and four-finger pressing (Press) tasks in four different wrist postures (extended, flexed, neutral, spontaneous). The maximum finger force (MFF), finger and wrist joint angles, as well as activation of four muscles were determined using dynamometry, motion capture, and electromyography. The force and length of the four muscles were estimated from joint angles and muscle activation using a musculoskeletal model. MFF decreased for flexed wrist during Pinch but remained stable across wrist postures during Press. The results suggested that the loss of pinch grip force in deviated wrist posture is partially related to force-length relationship of finger extensors. In opposition, MFF during Press was not influenced by the modulation of muscle capacities but was probably first limited by mechanical and neural factors related to finger interdependence |
| 2023-05-28 | Multi-Modal Wireless Flexible Gel-Free Sensors with Edge Deep Learning for Detecting and Alerting Freezing of Gait in Parkinson's Patients | Yuhan Hou et.al. | 2305.17629v1 | null | Freezing of gait (FoG) is a debilitating symptom of Parkinson's disease (PD). This work develops flexible wearable sensors that can detect FoG and alert patients and companions to help prevent falls. FoG is detected on the sensors using a deep learning (DL) model with multi-modal sensory inputs collected from distributed wireless sensors. Two types of wireless sensors are developed, including: (1) a C-shape central node placed around the patient's ears, which collects electroencephalogram (EEG), detects FoG using an on-device DL model, and generates auditory alerts when FoG is detected; (2) a stretchable patch-type sensor attached to the patient's legs, which collects electromyography (EMG) and movement information from accelerometers. The patch-type sensors wirelessly send collected data to the central node through low-power ultra-wideband (UWB) transceivers. All sensors are fabricated on flexible printed circuit boards. Adhesive gel-free acetylene carbon black and polydimethylsiloxane electrodes are fabricated on the flexible substrate to allow conformal wear over the long term. Custom integrated circuits (IC) are developed in 180 nm CMOS technology and used in both types of sensors for signal acquisition, digitization, and wireless communication. A novel lightweight DL model is trained using multi-modal sensory data. The inference of the DL model is performed on a low-power microcontroller in the central node. The DL model achieves a high detection sensitivity of 0.81 and a specificity of 0.88. The developed wearable sensors are ready for clinical experiments and hold great promise in improving the quality of life of patients with PD. The proposed design methodologies can be used in wearable medical devices for the monitoring and treatment of a wide range of neurodegenerative diseases. |
| 2023-05-26 | A Multi-Resolution Physics-Informed Recurrent Neural Network: Formulation and Application to Musculoskeletal Systems | Karan Taneja et.al. | 2305.16593v1 | null | This work presents a multi-resolution physics-informed recurrent neural network (MR PI-RNN), for simultaneous prediction of musculoskeletal (MSK) motion and parameter identification of the MSK systems. The MSK application was selected as the model problem due to its challenging nature in mapping the high-frequency surface electromyography (sEMG) signals to the low-frequency body joint motion controlled by the MSK and muscle contraction dynamics. The proposed method utilizes the fast wavelet transform to decompose the mixed frequency input sEMG and output joint motion signals into nested multi-resolution signals. The prediction model is subsequently trained on coarser-scale input-output signals using a gated recurrent unit (GRU), and then the trained parameters are transferred to the next level of training with finer-scale signals. These training processes are repeated recursively under a transfer-learning fashion until the full-scale training (i.e., with unfiltered signals) is achieved, while satisfying the underlying dynamic equilibrium. Numerical examples on recorded subject data demonstrate the effectiveness of the proposed framework in generating a physics-informed forward-dynamics surrogate, which yields higher accuracy in motion predictions of elbow flexion-extension of an MSK system compared to the case with single-scale training. The framework is also capable of identifying muscle parameters that are physiologically consistent with the subject's kinematics data. |
| 2023-05-18 | Adaptive Learning based Upper-Limb Rehabilitation Training System with Collaborative Robot | Jun Hong Lim et.al. | 2305.10642v2 | null | Rehabilitation training for patients with motor disabilities usually requires specialized devices in rehabilitation centers. Home-based multi-purpose training would significantly increase treatment accessibility and reduce medical costs. While it is unlikely to equip a set of rehabilitation robots at home, we investigate the feasibility to use the general-purpose collaborative robot for rehabilitation therapies. In this work, we developed a new system for multi-purpose upper-limb rehabilitation training using a generic robot arm with human motor feedback and preference. We integrated surface electromyography, force/torque sensors, RGB-D cameras, and robot controllers with the Robot Operating System to enable sensing, communication, and control of the system. Imitation learning methods were adopted to imitate expert-provided training trajectories which could adapt to subject capabilities to facilitate in-home training. Our rehabilitation system is able to perform gross motor function and fine motor skill training with a gripper-based end-effector. We simulated system control in Gazebo and training effects (muscle activation level) in OpenSim and evaluated its real performance with human subjects. For all the subjects enrolled, our system achieved better training outcomes compared to specialist-assisted rehabilitation under the same conditions. Our work demonstrates the potential of utilizing collaborative robots for in-home motor rehabilitation training. |
| 2023-05-06 | Electromyography Signal Classification Using Deep Learning | Mekia Shigute Gaso et.al. | 2305.04006v1 | null | We have implemented a deep learning model with L2 regularization and trained it on Electromyography (EMG) data. The data comprises of EMG signals collected from control group, myopathy and ALS patients. Our proposed deep neural network consists of eight layers; five fully connected, two batch normalization and one dropout layers. The data is divided into training and testing sections by subsequently dividing the training data into sub-training and validation sections. Having implemented this model, an accuracy of 99 percent is achieved on the test data set. The model was able to distinguishes the normal cases (control group) from the others at a precision of 100 percent and classify the myopathy and ALS with high accuracy of 97.4 and 98.2 percents, respectively. Thus we believe that, this highly improved classification accuracies will be beneficial for their use in the clinical diagnosis of neuromuscular disorders. |
| 2023-04-08 | Overview of processing techniques for surface electromyography signals | Alejandra Manjarres-Triana et.al. | 2304.04098v1 | null | Surface electromyography (sEMG) is a technology to assess muscle activation, which is an important component in applications related to diagnosis, treatment, progression assessment, and rehabilitation of specific individuals' conditions. Recently, sEMG potential has been shown, since it can be used in a non-invasive manner; nevertheless, it requires careful signal analysis to support health professionals reliably. This paper briefly described the basic concepts involved in the sEMG, such as the physiology of the muscles, the data acquisition, the signal processing techniques, and classification methods that may be used to identify disorders or signs of abnormalities according to muscular patterns. Specifically, classification methods encompass digital signal processing techniques and machine learning with high potential in the field. We hope that this work serves as an introduction to researchers interested in this field. |
| 2023-04-02 | A Framework and Call to Action for the Future Development of EMG-Based Input in HCI | Ethan Eddy et.al. | 2304.00582v1 | null | Electromyography (EMG) has been explored as an HCI input modality following a long history of success for prosthesis control. While EMG has the potential to address a range of hands-free interaction needs, it has yet to be widely accepted outside of prosthetics due to a perceived lack of robustness and intuitiveness. To understand how EMG input systems can be better designed, we sampled the ACM digital library to identify limitations in the approaches taken. Leveraging these works in combination with our research group's extensive interdisciplinary experience in this field, four themes emerged (1) interaction design, (2) model design, (3) system evaluation, and (4) reproducibility. Using these themes, we provide a step-by-step framework for designing EMG-based input systems to strengthen the foundation on which EMG-based interactions are built. Additionally, we provide a call-to-action for researchers to unlock the hidden potential of EMG as a widely applicable and highly usable input modality. |
| 2023-03-13 | Discriminative sEMG-based features to assess damping ability and interpret activation patterns in lower-limb muscles of ACLR athletes | Mehran Hatamzadeh et.al. | 2303.06954v1 | null | Objective: The main goal of the athletes who undergo anterior cruciate ligament reconstruction (ACLR) surgery is a successful return-to-sport. At this stage, identifying muscular deficits becomes important. Hence, in this study, three discriminative features based on surface electromyographic signals (sEMG) acquired in a dynamic protocol are introduced to assess the damping ability and interpret activation patterns in lower-limb muscles of ACLR athletes. Methods: The features include the median frequency of the power spectrum density (PSD), the relative percentage of the equivalent damping or equivalent stiffness derived from the median frequency, and the energy of the signals in the time-frequency plane of the pseudo-Wigner-Ville distribution (PWVD). To evaluate the features, 11 healthy and 11 ACLR athletes (6 months post-reconstruction surgery) were recruited to acquire the sEMG signals from the medial and the lateral parts of the hamstrings, quadriceps, and gastrocnemius muscles in pre- and post-fatigue single-leg landings. Results: A significant damping deficiency is observed in the hamstring muscles of ACLR athletes by evaluating the proposed features. This deficiency indicates that more attention should be paid to this muscle of ACLR athletes in pre-return-to-sport rehabilitations. Conclusion: The quality of electromyography-based pre-return-to-sport assessments on ACLR subjects depends on the sEMG acquisition protocol, as well as the type and nature of the extracted features. Hence, combinatorial application of both energy-based features (derived from the PWVD) and power-based features (derived from the PSD) could facilitate the assessment process by providing additional biomechanical information regarding the behavior of the muscles surrounding the knee. |
| 2023-03-11 | AI-Enhanced Intensive Care Unit: Revolutionizing Patient Care with Pervasive Sensing | Subhash Nerella et.al. | 2303.06252v1 | null | The intensive care unit (ICU) is a specialized hospital space where critically ill patients receive intensive care and monitoring. Comprehensive monitoring is imperative in assessing patients conditions, in particular acuity, and ultimately the quality of care. However, the extent of patient monitoring in the ICU is limited due to time constraints and the workload on healthcare providers. Currently, visual assessments for acuity, including fine details such as facial expressions, posture, and mobility, are sporadically captured, or not captured at all. These manual observations are subjective to the individual, prone to documentation errors, and overburden care providers with the additional workload. Artificial Intelligence (AI) enabled systems has the potential to augment the patient visual monitoring and assessment due to their exceptional learning capabilities. Such systems require robust annotated data to train. To this end, we have developed pervasive sensing and data processing system which collects data from multiple modalities depth images, color RGB images, accelerometry, electromyography, sound pressure, and light levels in ICU for developing intelligent monitoring systems for continuous and granular acuity, delirium risk, pain, and mobility assessment. This paper presents the Intelligent Intensive Care Unit (I2CU) system architecture we developed for real-time patient monitoring and visual assessment. |
| 2023-02-19 | Estimation and Early Prediction of Grip Force Based on sEMG Signals and Deep Recurrent Neural Networks | Atusa Ghorbani et.al. | 2302.09555v1 | null | Hands are used for communicating with the surrounding environment and have a complex structure that enables them to perform various tasks with their multiple degrees of freedom. Hand amputation can prevent a person from performing their daily activities. In that event, finding a suitable, fast, and reliable alternative for the missing limb can affect the lives of people who suffer from such conditions. As the most important use of the hands is to grasp objects, the purpose of this study is to accurately predict gripping force from surface electromyography (sEMG) signals during a pinch-type grip. In that regard, gripping force and sEMG signals are derived from 10 healthy subjects. Results show that for this task, recurrent networks outperform nonrecurrent ones, such as a fully connected multilayer perceptron (MLP) network. Gated recurrent unit (GRU) and long short-term memory (LSTM) networks can predict the gripping force with R-squared values of 0.994 and 0.992, respectively, and a prediction rate of over 1300 predictions per second. The predominant advantage of using such frameworks is that the gripping force can be predicted straight from preprocessed sEMG signals without any form of feature extraction, not to mention the ability to predict future force values using larger prediction horizons adequately. The methods presented in this study can be used in the myoelectric control of prosthetic hands or robotic grippers. |
| 2023-02-17 | Sleep Model -- A Sequence Model for Predicting the Next Sleep Stage | Iksoo Choi et.al. | 2302.12709v1 | null | As sleep disorders are becoming more prevalent there is an urgent need to classify sleep stages in a less disturbing way.In particular, sleep-stage classification using simple sensors, such as single-channel electroencephalography (EEG), electrooculography (EOG), electromyography (EMG), or electrocardiography (ECG) has gained substantial interest. In this study, we proposed a sleep model that predicts the next sleep stage and used it to improve sleep classification accuracy. The sleep models were built using sleep-sequence data and employed either statistical |
| 2023-02-15 | Automated Movement Detection with Dirichlet Process Mixture Models and Electromyography | Navin Cooray et.al. | 2302.07509v1 | null | Numerous sleep disorders are characterised by movement during sleep, these include rapid-eye movement sleep behaviour disorder (RBD) and periodic limb movement disorder. The process of diagnosing movement related sleep disorders requires laborious and time-consuming visual analysis of sleep recordings. This process involves sleep clinicians visually inspecting electromyogram (EMG) signals to identify abnormal movements. The distribution of characteristics that represent movement can be diverse and varied, ranging from brief moments of tensing to violent outbursts. This study proposes a framework for automated limb-movement detection by fusing data from two EMG sensors (from the left and right limb) through a Dirichlet process mixture model. Several features are extracted from 10 second mini-epochs, where each mini-epoch has been classified as 'leg-movement' or 'no leg-movement' based on annotations of movement from sleep clinicians. The distributions of the features from each category can be estimated accurately using Gaussian mixture models with the Dirichlet process as a prior. The available dataset includes 36 participants that have all been diagnosed with RBD. The performance of this framework was evaluated by a 10-fold cross validation scheme (participant independent). The study was compared to a random forest model and outperformed it with a mean accuracy, sensitivity, and specificity of 94%, 48%, and 95%, respectively. These results demonstrate the ability of this framework to automate the detection of limb movement for the potential application of assisting clinical diagnosis and decision-making. |
| 2023-02-08 | Simplified markerless stride detection pipeline (sMaSDP) for surface EMG segmentation | Rafael Castro Aguiar et.al. | 2302.04243v1 | null | People with mobility impairments are often recommended for gait assessment studies to diagnose their condition and to select appropriate physiotherapy to improve their mobility. These studies are often conducted in clinical or lab settings, where subjects are assessed in a foreign environment, which may influence their motivation, coordination and overall mobility. Alternatively, if the subject's gait could be assessed in their daily-lives, in unconstrained settings, a more naturalistic gait assessment could be performed. Kinematic analysis of a gait pattern on its own may not be sufficient to characterise a subject's mobility. To better diagnose gait deficiencies, analysis of the patient's muscle activity should be conducted as well. To do so, gait studies should collect, synchronously, Electromyography (EMG) and kinematic data. This method introduces a simplified markerless gait event detection pipeline for the segmentation of EMG signals, via synchronously recorded Inertial Measurement Unit (IMU) data. In an unconstrained walking experiment, healthy subjects walk through a designed course with their kinematic and EMG data recorded. This course comprises 5 different walking modalities (level walking, ramp up/down, staircase up/down), mimicking everyday walking. Through timepoint matching, segmentation and filtering, we generate an algorithm that detects heel-strike (HS) events using a single IMU, and isolates EMG activity of gait cycles, in the different walking modalities. This gait event detection algorithm can be adapted to different datasets, and was tested in both healthy and Parkinson's Disease (PD) gait. Results demonstrate the extracted muscle activity levels in a healthy subject's level ground walking, and the extracted HS events of a PD patient. Adjustments to algorithm parameters are possible (e.g., expected velocity, cadence) and can further increase the detection accuracy. |
| 2023-02-01 | Upper-limb Geometric MyoPassivity Map for Physical Human-Robot Interaction | Xingyuan Zhou et.al. | 2302.00495v1 | null | The intrinsic biomechanical characteristic of the human upper limb plays a central role in absorbing the interactive energy during physical human-robot interaction (pHRI). We have recently shown that based on the concept of ``Excess of Passivity (EoP)," from nonlinear control theory, it is possible to decode such energetic behavior for both upper and lower limbs. The extracted knowledge can be used in the design of controllers for optimizing the transparency and fidelity of force fields in human-robot interaction and in haptic systems. In this paper, for the first time, we investigate the frequency behavior of the passivity map for the upper limb when the muscle co-activation was controlled in real-time through visual electromyographic feedback. Five healthy subjects (age: 27 +/- 5) were included in this study. The energetic behavior was evaluated at two stimulation frequencies at eight interaction directions over two controlled muscle co-activation levels. Electromyography (EMG) was captured using the Delsys Wireless Trigno system. Results showed a correlation between EMG and EoP, which was further altered by increasing the frequency. The proposed energetic behavior is named the Geometric MyoPassivity (GMP) map. The findings indicate that the GMP map has the potential to be used in real-time to quantify the absorbable energy, thus passivity margin of stability for upper limb interaction during pHRI. |
| 2023-01-31 | A Prototype System for High Frame Rate Ultrasound Imaging based Prosthetic Arm Control | Ayush Singh et.al. | 2301.13809v3 | null | The creation of unique control methods for a hand prosthesis is still a problem that has to be addressed. The best choice of a human-machine interface (HMI) that should be used to enable natural control is still a challenge. Surface electromyography (sEMG), the most popular option, has a variety of difficult-to-fix issues (electrode displacement, sweat, fatigue). The ultrasound imaging-based methodology offers a means of recognising complex muscle activity and configuration with a greater SNR and less hardware requirements as compared to sEMG. In this study, a prototype system for high frame rate ultrasound imaging for prosthetic arm control is proposed. Using the proposed framework, a virtual robotic hand simulation is developed that can mimic a human hand as illustrated in the link [10]. The proposed classification model simulating four hand gestures has a classification accuracy of more than 90%. |
| 2023-01-23 | Long-term stable Electromyography classification using Canonical Correlation Analysis | Elisa Donati et.al. | 2301.09729v1 | null | Discrimination of hand gestures based on the decoding of surface electromyography (sEMG) signals is a well-establish approach for controlling prosthetic devices and for Human-Machine Interfaces (HMI). However, despite the promising results achieved by this approach in well-controlled experimental conditions, its deployment in long-term real-world application scenarios is still hindered by several challenges. One of the most critical challenges is maintaining high EMG data classification performance across multiple days without retraining the decoding system. The drop in performance is mostly due to the high EMG variability caused by electrodes shift, muscle artifacts, fatigue, user adaptation, or skin-electrode interfacing issues. Here we propose a novel statistical method based on canonical correlation analysis (CCA) that stabilizes EMG classification performance across multiple days for long-term control of prosthetic devices. We show how CCA can dramatically decrease the performance drop of standard classifiers observed across days, by maximizing the correlation among multiple-day acquisition data sets. Our results show how the performance of a classifier trained on EMG data acquired only of the first day of the experiment maintains 90% relative accuracy across multiple days, compensating for the EMG data variability that occurs over long-term periods, using the CCA transformation on data obtained from a small number of gestures. This approach eliminates the need for large data sets and multiple or periodic training sessions, which currently hamper the usability of conventional pattern recognition based approaches |
| 2023-01-23 | High-density magnetomyography is superior to high-density surface electromyography for motor unit decomposition: a simulation study | Thomas Klotz et.al. | 2301.09494v2 | null | Objective: Studying motor units (MUs) is essential for understanding motor control, the detection of neuromuscular disorders and the control of human-machine interfaces. Individual motor unit firings are currently identified in vivo by decomposing electromyographic (EMG) signals. Due to our body's properties and anatomy, individual motor units can only be separated to a limited extent with surface EMG. Unlike electrical signals, magnetic fields do not interact with human tissues. This physical property and the emerging technology of quantum sensors make magnetomyography (MMG) a highly promising methodology. However, the full potential of MMG to study neuromuscular physiology has not yet been explored. Approach: In this work, we perform in silico trials that combine a biophysical model of EMG and MMG with state-of-the-art algorithms for the decomposition of motor units. This allows the prediction of an upper-bound for the motor unit decomposition accuracy. Main results: It is shown that non-invasive high-density MMG data is superior over comparable high-density surface EMG data for the robust identification of the discharge patterns of individual motor units. Decomposing MMG instead of EMG increased the number of identifiable motor units by 76%. Notably, MMG exhibits a less pronounced bias to detect superficial motor units. Significance: The presented simulations provide insights into methods to study the neuromuscular system non-invasively and in vivo that would not be easily feasible by other means. Hence, this study provides guidance for the development of novel biomedical technologies. |
| 2023-01-13 | Analysis of LGM Model for sEMG Signals related to Weight Training | Durgesh Kusuru et.al. | 2301.05417v1 | null | Statistical models of Surface electromyography (sEMG) signals have several applications such as better understanding of sEMG signal generation, improved pattern recognition based control of wearable exoskeletons and prostheses, improving training strategies in sports activities, and EMG simulation studies. Most of the existing studies analysed the statistical model of sEMG signals acquired under isometric contractions. However, there is no study that addresses the statistical model under isotonic contractions. In this work, a new dataset, electromyography analysis of human activities - database 2 (EMAHA-DB2) is developed. It consists of two experiments based on both isometric and isotonic activities during weight training. Previously, a novel Laplacian-Gaussian Mixture (LGM) model was demonstrated for a few benchmark datasets consisting of basic movements and gestures. In this work, the model suitability analysis is extended to the EMAHA-DB2 dataset. Further, the LGM model is compared with three existing statistical models including the recent scale-mixture model. According to qualitative and quantitative analyses, the LGM model has a better fit to the empirical pdf of the recorded sEMG signals compared with the scale mixture model and the other standard models. The variance and mixing weight of the Laplacian component of the signal are analyzed with respect to the type of muscle, type of muscle contraction, dumb-bell weight and training experience of the subjects. The sEMG variance (the Laplacian component) increases with respect to the weights, is greater for isotonic activity especially for the biceps. For isotonic activity, the signal variance increases with training experience. Importantly, the ratio of the variances from the two muscle sites is observed to be nearly independent of the lifted weight and consistently increases with the training experience. |
| 2023-01-09 | EMAHA-DB1: A New Upper Limb sEMG Dataset for Classification of Activities of Daily Living | Naveen Kumar Karnam et.al. | 2301.03325v1 | null | In this paper, we present electromyography analysis of human activity - database 1 (EMAHA-DB1), a novel dataset of multi-channel surface electromyography (sEMG) signals to evaluate the activities of daily living (ADL). The dataset is acquired from 25 able-bodied subjects while performing 22 activities categorised according to functional arm activity behavioral system (FAABOS) (3 - full hand gestures, 6 - open/close office draw, 8 - grasping and holding of small office objects, 2 - flexion and extension of finger movements, 2 - writing and 1 - rest). The sEMG data is measured by a set of five Noraxon Ultium wireless sEMG sensors with Ag/Agcl electrodes placed on a human hand. The dataset is analyzed for hand activity recognition classification performance. The classification is performed using four state-ofthe-art machine learning classifiers, including Random Forest (RF), Fine K-Nearest Neighbour (KNN), Ensemble KNN (sKNN) and Support Vector Machine (SVM) with seven combinations of time domain and frequency domain feature sets. The state-of-theart classification accuracy on five FAABOS categories is 83:21% by using the SVM classifier with the third order polynomial kernel using energy feature and auto regressive feature set ensemble. The classification accuracy on 22 class hand activities is 75:39% by the same SVM classifier with the log moments in frequency domain (LMF) feature, modified LMF, time domain statistical (TDS) feature, spectral band powers (SBP), channel cross correlation and local binary patterns (LBP) set ensemble. The analysis depicts the technical challenges addressed by the dataset. The developed dataset can be used as a benchmark for various classification methods as well as for sEMG signal analysis corresponding to ADL and for the development of prosthetics and other wearable robotics. |
| 2023-01-04 | A Novel Power-optimized CMOS sEMG Device with Ultra Low-noise integrated with ConvNet (VGG16) for Biomedical Applications | Ahmed Ayman - Mohamed Sabry et.al. | 2301.09570v2 | null | The needle bio-potential sensors for measuring muscle and brain activity need invasive surgical targeted muscle reinnervation (TMR) and a demanding process to maintain, but surface bio-potential sensors lack clear bio-signal reading (Signal-Interference). In this research, a novel power-optimized complementary metal-oxide-semiconductor (CMOS) Surface Electromyography (sEMG) is developed to improve the efficiency and quality of captured bio-signal for biomedical application: The early diagnosis of neurological disorders (Dystonia) and a novel compatible mind-controlled prosthetic leg with human daily activities. A novel sEMG composed of CMOS Op-Amp based PIC16F877A 8-bit CMOS Flash-based Microcontroller is utilized to minimize power consumption and data processing time. sEMG Circuit is implemented with developed analog filter along with infinite impulse response (IIR) digital filter via Fast Fourier Transform (FFT), Z-transform, and difference equations. The analysis shows a significant improvement of 169.2% noise-reduction in recorded EMG signal using developed digital filter compared to analog one according to numerical root mean square error (RMSE). Moreover, digital IIR was tested in two stages: algorithmic and real-world. As a result, IIR's algorithmic (MATLAB) and real-world RMSEs were 0.03616 and 0.05224, respectively. A notable advancement of 20.8% in data processing duration in EMG signal analysis. Optimizing VGG, AlexNet, and ResNet ConvNet as trained and tested on 15 public EEG (62-electrode) and 18 subjects' observed EMG data. The results indicate that VGG16-1D is 98.43% higher. During real testing, the accuracy was 95.8 +/- 4.6% for 16 subjects (6 Amputees-10 Dystonia). This study demonstrates the potential for sEMG, paving the way for biomedical applications. |
| 2023-01-03 | A Laplacian Gaussian Mixture Model for Surface EMG Signals of Human Arm Activity | Durgesh Kusuru et.al. | 2301.01080v1 | null | The probability density function (pdf) of surface Electromyography (sEMG) signals follows any one of the standalone standard distributions: the Gaussian or the Laplacian. Further, the choice of the model is dependent on muscle contraction force (MCF) levels. Hence, a unified model is proposed which explains the statistical nature of sEMG signals at different MCF levels. In this paper, we propose the Laplacian Gaussian Mixture (LGM) model for the signals recorded from upper limbs. This model is able to explain the sEMG signals from different activities corresponding to different MCF levels. The model is tested on different bench-mark sEMG data sets and is validated using both the qualitative and quantitative perspectives. It is determined that for low and medium contraction force levels the proposed mixture model is more accurate than both the Laplacian and the Gaussian models. Whereas for high contraction force level, the LGM model behaves as a Gaussian model. The mixing weights of the LGM model are analyzed and it is observed that for low and medium MCF levels both the mixing weights of LGM model do contribute. Whereas for high contraction force levels the Laplacian weight becomes weaker. The proposed LGM model for sEMG signals from upper limbs explains sEMG signals at different MCF levels. The proposed model helps in improved understanding of statistical nature of sEMG signals and better feature representation in the classification problems. |
| 2022-12-28 | Joint Action is a Framework for Understanding Partnerships Between Humans and Upper Limb Prostheses | Michael R. Dawson et.al. | 2212.14124v1 | null | Recent advances in upper limb prostheses have led to significant improvements in the number of movements provided by the robotic limb. However, the method for controlling multiple degrees of freedom via user-generated signals remains challenging. To address this issue, various machine learning controllers have been developed to better predict movement intent. As these controllers become more intelligent and take on more autonomy in the system, the traditional approach of representing the human-machine interface as a human controlling a tool becomes limiting. One possible approach to improve the understanding of these interfaces is to model them as collaborative, multi-agent systems through the lens of joint action. The field of joint action has been commonly applied to two human partners who are trying to work jointly together to achieve a task, such as singing or moving a table together, by effecting coordinated change in their shared environment. In this work, we compare different prosthesis controllers (proportional electromyography with sequential switching, pattern recognition, and adaptive switching) in terms of how they present the hallmarks of joint action. The results of the comparison lead to a new perspective for understanding how existing myoelectric systems relate to each other, along with recommendations for how to improve these systems by increasing the collaborative communication between each partner. |
| 2022-12-24 | Agent-based Modeling and Simulation of Human Muscle For Development of Software to Analyze the Human Gait | Sina Saadati et.al. | 2212.12760v1 | null | In this research, we are about to present an agentbased model of human muscle which can be used in analysis of human movement. As the model is designed based on the physiological structure of the muscle, The simulation calculations would be natural, and also, It can be possible to analyze human movement using reverse engineering methods. The model is also a suitable choice to be used in modern prostheses, because the calculation of the model is less than other machine learning models such as artificial neural network algorithms and It makes our algorithm battery-friendly. We will also devise a method that can calculate the intensity of human muscle during gait cycle using a reverse engineering solution. The algorithm called Boots is different from some optimization methods, so It would be able to compute the activities of both agonist and antagonist muscles in a joint. As a consequence, By having an agent-based model of human muscle and Boots algorithm, We would be capable to develop software that can calculate the nervous stimulation of human's lower body muscle based on the angular displacement during gait cycle without using painful methods like electromyography. By developing the application as open-source software, We are hopeful to help researchers and physicians who are studying in medical and biomechanical fields. |
| 2022-12-20 | Pain level and pain-related behaviour classification using GRU-based sparsely-connected RNNs | Mohammad Mahdi Dehshibi et.al. | 2212.14806v1 | null | There is a growing body of studies on applying deep learning to biometrics analysis. Certain circumstances, however, could impair the objective measures and accuracy of the proposed biometric data analysis methods. For instance, people with chronic pain (CP) unconsciously adapt specific body movements to protect themselves from injury or additional pain. Because there is no dedicated benchmark database to analyse this correlation, we considered one of the specific circumstances that potentially influence a person's biometrics during daily activities in this study and classified pain level and pain-related behaviour in the EmoPain database. To achieve this, we proposed a sparsely-connected recurrent neural networks (s-RNNs) ensemble with the gated recurrent unit (GRU) that incorporates multiple autoencoders using a shared training framework. This architecture is fed by multidimensional data collected from inertial measurement unit (IMU) and surface electromyography (sEMG) sensors. Furthermore, to compensate for variations in the temporal dimension that may not be perfectly represented in the latent space of s-RNNs, we fused hand-crafted features derived from information-theoretic approaches with represented features in the shared hidden state. We conducted several experiments which indicate that the proposed method outperforms the state-of-the-art approaches in classifying both pain level and pain-related behaviour. |
| Publish Date | Title | Authors | Code | Abstract | |
|---|---|---|---|---|---|
| 2023-07-07 | A Bayesian Circadian Hidden Markov Model to Infer Rest-Activity Rhythms Using 24-hour Actigraphy Data | Jiachen Lu et.al. | 2307.03832v1 | null | 24-hour actigraphy data collected by wearable devices offer valuable insights into physical activity types, intensity levels, and rest-activity rhythms (RAR). RARs, or patterns of rest and activity exhibited over a 24-hour period, are regulated by the body's circadian system, synchronizing physiological processes with external cues like the light-dark cycle. Disruptions to these rhythms, such as irregular sleep patterns, daytime drowsiness or shift work, have been linked to adverse health outcomes including metabolic disorders, cardiovascular disease, depression, and even cancer, making RARs a critical area of health research. In this study, we propose a Bayesian Circadian Hidden Markov Model (BCHMM) that explicitly incorporates 24-hour circadian oscillators mirroring human biological rhythms. The model assumes that observed activity counts are conditional on hidden activity states through Gaussian emission densities, with transition probabilities modeled by state-specific sinusoidal functions. Our comprehensive simulation study reveals that BCHMM outperforms frequentist approaches in identifying the underlying hidden states, particularly when the activity states are difficult to separate. BCHMM also excels with smaller Kullback-Leibler divergence on estimated densities. With the Bayesian framework, we address the label-switching problem inherent to hidden Markov models via a positive constraint on mean parameters. From the proposed BCHMM, we can infer the 24-hour rest-activity profile via time-varying state probabilities, to characterize the person-level RAR. We demonstrate the utility of the proposed BCHMM using 2011-2014 National Health and Nutrition Examination Survey (NHANES) data, where worsened RAR, indicated by lower probabilities in low-activity state during the day and higher probabilities in high-activity state at night, is associated with an increased risk of diabetes. |
| 2023-03-14 | Transfer Learning for Real-time Deployment of a Screening Tool for Depression Detection Using Actigraphy | Rajanikant Ghate et.al. | 2303.07847v1 | null | Automated depression screening and diagnosis is a highly relevant problem today. There are a number of limitations of the traditional depression detection methods, namely, high dependence on clinicians and biased self-reporting. In recent years, research has suggested strong potential in machine learning (ML) based methods that make use of the user's passive data collected via wearable devices. However, ML is data hungry. Especially in the healthcare domain primary data collection is challenging. In this work, we present an approach based on transfer learning, from a model trained on a secondary dataset, for the real time deployment of the depression screening tool based on the actigraphy data of users. This approach enables machine learning modelling even with limited primary data samples. A modified version of leave one out cross validation approach performed on the primary set resulted in mean accuracy of 0.96, where in each iteration one subject's data from the primary set was set aside for testing. |
| 2023-01-04 | KIDS: kinematics-based (in)activity detection and segmentation in a sleep case study | Omar Elnaggar et.al. | 2301.03469v1 | null | Sleep behaviour and in-bed movements contain rich information on the neurophysiological health of people, and have a direct link to the general well-being and quality of life. Standard clinical practices rely on polysomnography for sleep assessment; however, it is intrusive, performed in unfamiliar environments and requires trained personnel. Progress has been made on less invasive sensor technologies, such as actigraphy, but clinical validation raises concerns over their reliability and precision. Additionally, the field lacks a widely acceptable algorithm, with proposed approaches ranging from raw signal or feature thresholding to data-hungry classification models, many of which are unfamiliar to medical staff. This paper proposes an online Bayesian probabilistic framework for objective (in)activity detection and segmentation based on clinically meaningful joint kinematics, measured by a custom-made wearable sensor. Intuitive three-dimensional visualisations of kinematic timeseries were accomplished through dimension reduction based preprocessing, offering out-of-the-box framework explainability potentially useful for clinical monitoring and diagnosis. The proposed framework attained up to 99.2% |
| 2022-12-31 | Definition and clinical validation of Pain Patient States from high-dimensional mobile data: application to a chronic pain cohort | Jenna M. Reinen et.al. | 2301.00299v1 | null | The technical capacity to monitor patients with a mobile device has drastically expanded, but data produced from this approach are often difficult to interpret. We present a solution to produce a meaningful representation of patient status from large, complex data streams, leveraging both a data-driven approach, and use clinical knowledge to validate results. Data were collected from a clinical trial enrolling chronic pain patients, and included questionnaires, voice recordings, actigraphy, and standard health assessments. The data were reduced using a clustering analysis. In an initial exploratory analysis with only questionnaire data, we found up to 3 stable cluster solutions that grouped symptoms on a positive to negative spectrum. Objective features (actigraphy, speech) expanded the cluster solution granularity. Using a 5 state solution with questionnaire and actigraphy data, we found significant correlations between cluster properties and assessments of disability and quality-of-life. The correlation coefficient values showed an ordinal distinction, confirming the cluster ranking on a negative to positive spectrum. This suggests we captured novel, distinct Pain Patient States with this approach, even when multiple clusters were equated on pain magnitude. Relative to using complex time courses of many variables, Pain Patient States holds promise as an interpretable, useful, and actionable metric for a clinician or caregiver to simplify and provide timely delivery of care. |
| 2022-12-21 | A hidden Markov modeling approach combining objective measure of activity and subjective measure of self-reported sleep to estimate the sleep-wake cycle | Semhar B. Ogbagaber et.al. | 2212.11224v1 | null | Characterizing the sleep-wake cycle in adolescents is an important prerequisite to better understand the association of abnormal sleep patterns with subsequent clinical and behavioral outcomes. The aim of this research was to develop hidden Markov models (HMM) that incorporate both objective (actigraphy) and subjective (sleep log) measures to estimate the sleep-wake cycle using data from the NEXT longitudinal study, a large population-based cohort study. The model was estimated with a negative binomial distribution for the activity counts (1-minute epochs) to account for overdispersion relative to a Poisson process. Furthermore, self-reported measures were dichotomized (for each one-minute interval) and subject to misclassification. We assumed that the unobserved sleep-wake cycle follows a two-state Markov chain with transitional probabilities varying according to a circadian rhythm. Maximum-likelihood estimation using a backward-forward algorithm was applied to fit the longitudinal data on a subject by subject basis. The algorithm was used to reconstruct the sleep-wake cycle from sequences of self-reported sleep and activity data. Furthermore, we conduct simulations to examine the properties of this approach under different observational patterns including both complete and partially observed measurements on each individual. |
| 2022-08-30 | Mediation analysis with densities as mediators with an application to iCOMPARE trial | Jingru Zhang et.al. | 2208.13939v1 | null | Physical activity has long been shown to be associated with biological and physiological performance and risk of diseases. It is of great interest to assess whether the effect of an exposure or intervention on an outcome is mediated through physical activity measured by modern wearable devices such as actigraphy. However, existing methods for mediation analysis focus almost exclusively on mediation variable that is in the Euclidean space, which cannot be applied directly to the actigraphy data of physical activity. Such data is best summarized in the form of an histogram or density. In this paper, we extend the structural equation models (SEMs) to the settings where a density is treated as the mediator to study the indirect mediation effect of physical activity on an outcome. We provide sufficient conditions for identifying the average causal effects of density mediator and present methods for estimating the direct and mediating effects of density on an outcome. We apply our method to the data set from the iCOMPARE trial that compares flexible duty-hour policies and standard duty-hour policies on interns' sleep related outcomes to explore the mediation effect of physical activity on the causal path between flexible duty-hour policies and sleep related outcomes. |
| 2021-11-29 | Validating CircaCP: a Generic Sleep-Wake Cycle Detection Algorithm | Shanshan Chen et.al. | 2111.14960v1 | link | Sleep-wake cycle detection is a key step when extrapolating sleep patterns from actigraphy data. Numerous supervised detection algorithms have been developed with parameters estimated from and optimized for a particular dataset, yet their generalizability from sensor to sensor or study to study is unknown. In this paper, we propose and validate an unsupervised algorithm -- CircaCP -- to detect sleep-wake cycles from minute-by-minute actigraphy data. It first uses a robust cosinor model to estimate circadian rhythm, then searches for a single change point (CP) within each cycle. We used CircaCP to estimate sleep/wake onset times (S/WOTs) from 2125 indviduals' data in the MESA Sleep study and compared the estimated S/WOTs against self-reported S/WOT event markers. Lastly, we quantified the biases between estimated and self-reported S/WOTs, as well as variation in S/WOTs contributed by the two methods, using linear mixed-effects models and variance component analysis. On average, SOTs estimated by CircaCP were five minutes behind those reported by event markers, and WOTs estimated by CircaCP were less than one minute behind those reported by markers. These differences accounted for less than 0.2% variability in SOTs and in WOTs, taking into account other sources of between-subject variations. By focusing on the commonality in human circadian rhythms captured by actigraphy, our algorithm transferred seamlessly from hip-worn ActiGraph data collected from children in our previous study to wrist-worn Actiwatch data collected from adults. The large between- and within-subject variability highlights the need for estimating individual-level S/WOTs when conducting actigraphy research. The generalizability of our algorithm also suggests that it could be widely applied to actigraphy data collected by other wearable sensors. |
| 2021-07-08 | Circadian Rhythms are Not Captured Equal: Exploring Circadian Metrics Extracted by Different Computational Methods from Smartphone Accelerometer and GPS Sensors in Daily Life Tracking | Congyu Wu et.al. | 2107.04135v1 | null | Circadian rhythm is the natural biological cycle manifested in human daily routines. A regular and stable rhythm is found to be correlated with good physical and mental health. With the wide adoption of mobile and wearable technology, many types of sensor data, such as GPS and actigraphy, provide evidence for researchers to objectively quantify the circadian rhythm of a user and further use these quantified metrics of circadian rhythm to infer the user's health status. Researchers in computer science and psychology have investigated circadian rhythm using various mobile and wearable sensors in ecologically valid human sensing studies, but questions remain whether and how different data types produce different circadian rhythm results when simultaneously used to monitor a user. We hypothesize that different sensor data reveal different aspects of the user's daily behavior, thus producing different circadian rhythm patterns. In this paper we focus on two data types: GPS and accelerometer data from smartphones. We used smartphone data from 225 college student participants and applied four circadian rhythm characterization methods. We found significant and interesting discrepancies in the rhythmic patterns discovered among sensors, which suggests circadian rhythms discovered from different personal tracking sensors have different levels of sensitivity to device usage and aspects of daily behavior. |
| 2021-07-01 | Long-Short Ensemble Network for Bipolar Manic-Euthymic State Recognition Based on Wrist-worn Sensors | Ulysse Côté-Allard et.al. | 2107.00710v3 | link | Manic episodes of bipolar disorder can lead to uncritical behaviour and delusional psychosis, often with destructive consequences for those affected and their surroundings. Early detection and intervention of a manic episode are crucial to prevent escalation, hospital admission and premature death. However, people with bipolar disorder may not recognize that they are experiencing a manic episode and symptoms such as euphoria and increased productivity can also deter affected individuals from seeking help. This work proposes to perform user-independent, automatic mood-state detection based on actigraphy and electrodermal activity acquired from a wrist-worn device during mania and after recovery (euthymia). This paper proposes a new deep learning-based ensemble method leveraging long (20h) and short (5 minutes) time-intervals to discriminate between the mood-states. When tested on 47 bipolar patients, the proposed classification scheme achieves an average accuracy of 91.59% in euthymic/manic mood-state recognition. |
| 2021-05-05 | Activity-Aware Deep Cognitive Fatigue Assessment using Wearables | Mohammad Arif Ul Alam et.al. | 2105.02824v1 | null | Cognitive fatigue has been a common problem among workers which has become an increasing global problem since the emergence of COVID-19 as a global pandemic. While existing multi-modal wearable sensors-aided automatic cognitive fatigue monitoring tools have focused on physical and physiological sensors (ECG, PPG, Actigraphy) analytic on specific group of people (say gamers, athletes, construction workers), activity-awareness is utmost importance due to its different responses on physiology in different person. In this paper, we propose a novel framework, Activity-Aware Recurrent Neural Network (\emph{AcRoNN}), that can generalize individual activity recognition and improve cognitive fatigue estimation significantly. We evaluate and compare our proposed method with state-of-art methods using one real-time collected dataset from 5 individuals and another publicly available dataset from 27 individuals achieving max. 19% improvement. |
| 2021-04-28 | Optimizing Rescoring Rules with Interpretable Representations of Long-Term Information | Aaron Fisher et.al. | 2104.14291v1 | null | Analyzing temporal data (e.g., wearable device data) requires a decision about how to combine information from the recent and distant past. In the context of classifying sleep status from actigraphy, Webster's rescoring rules offer one popular solution based on the long-term patterns in the output of a moving-window model. Unfortunately, the question of how to optimize rescoring rules for any given setting has remained unsolved. To address this problem and expand the possible use cases of rescoring rules, we propose rephrasing these rules in terms of epoch-specific features. Our features take two general forms: (1) the time lag between now and the most recent [or closest upcoming] bout of time spent in a given state, and (2) the length of the most recent [or closest upcoming] bout of time spent in a given state. Given any initial moving window model, these features can be defined recursively, allowing for straightforward optimization of rescoring rules. Joint optimization of the moving window model and the subsequent rescoring rules can also be implemented using gradient-based optimization software, such as Tensorflow. Beyond binary classification problems (e.g., sleep-wake), the same approach can be applied to summarize long-term patterns for multi-state classification problems (e.g., sitting, walking, or stair climbing). We find that optimized rescoring rules improve the performance of sleep-wake classifiers, achieving accuracy comparable to that of certain neural network architectures. |
| 2021-01-05 | Bayesian Hierarchical Modeling and Analysis for Actigraph Data from Wearable Devices | Pierfrancesco Alaimo Di Loro et.al. | 2101.01624v4 | link | The majority of Americans fail to achieve recommended levels of physical activity, which leads to numerous preventable health problems such as diabetes, hypertension, and heart diseases. This has generated substantial interest in monitoring human activity to gear interventions toward environmental features that may relate to higher physical activity. Wearable devices, such as wrist-worn sensors that monitor gross motor activity (actigraph units) continuously record the activity levels of a subject, producing massive amounts of high-resolution measurements. Analyzing actigraph data needs to account for spatial and temporal information on trajectories or paths traversed by subjects wearing such devices. Inferential objectives include estimating a subject's physical activity levels along a given trajectory; identifying trajectories that are more likely to produce higher levels of physical activity for a given subject; and predicting expected levels of physical activity in any proposed new trajectory for a given set of health attributes. Here, we devise a Bayesian hierarchical modeling framework for spatial-temporal actigraphy data to deliver fully model-based inference on trajectories while accounting for subject-level health attributes and spatial-temporal dependencies. We undertake a comprehensive analysis of an original dataset from the Physical Activity through Sustainable Transport Approaches in Los Angeles (PASTA-LA) study to ascertain spatial zones and trajectories exhibiting significantly higher levels of physical activity while accounting for various sources of heterogeneity. |
| 2020-11-14 | Using Convolutional Variational Autoencoders to Predict Post-Trauma Health Outcomes from Actigraphy Data | Ayse S. Cakmak et.al. | 2011.07406v2 | null | Depression and post-traumatic stress disorder (PTSD) are psychiatric conditions commonly associated with experiencing a traumatic event. Estimating mental health status through non-invasive techniques such as activity-based algorithms can help to identify successful early interventions. In this work, we used locomotor activity captured from 1113 individuals who wore a research grade smartwatch post-trauma. A convolutional variational autoencoder (VAE) architecture was used for unsupervised feature extraction from four weeks of actigraphy data. By using VAE latent variables and the participant's pre-trauma physical health status as features, a logistic regression classifier achieved an area under the receiver operating characteristic curve (AUC) of 0.64 to estimate mental health outcomes. The results indicate that the VAE model is a promising approach for actigraphy data analysis for mental health outcomes in long-term studies. |
| 2020-08-06 | Fatigue Assessment using ECG and Actigraphy Sensors | Yang Bai et.al. | 2008.02871v2 | link | Fatigue is one of the key factors in the loss of work efficiency and health-related quality of life, and most fatigue assessment methods were based on self-reporting, which may suffer from many factors such as recall bias. To address this issue, we developed an automated system using wearable sensing and machine learning techniques for objective fatigue assessment. ECG/Actigraphy data were collected from subjects in free-living environments. Preprocessing and feature engineering methods were applied, before interpretable solution and deep learning solution were introduced. Specifically, for interpretable solution, we proposed a feature selection approach which can select less correlated and high informative features for better understanding system's decision-making process. For deep learning solution, we used state-of-the-art self-attention model, based on which we further proposed a consistency self-attention (CSA) mechanism for fatigue assessment. Extensive experiments were conducted, and very promising results were achieved. |
| 2019-06-03 | Deep learning from wristband sensor data: towards wearable, non-invasive seizure forecasting | Christian Meisel et.al. | 1906.00511v2 | null | Seizure forecasting may provide patients with timely warnings to adapt their daily activities and help clinicians deliver more objective, personalized treatments. While recent work has convincingly demonstrated that seizure risk assessment is possible, these early approaches relied largely on complex, often invasive setups including intracranial electrocorticography, implanted devices and multi-channel EEG, which limits translation of these methods to broad clinical application. To facilitate broader adaptation of seizure forecasting in clinical practice, non-invasive, easily applicable techniques that reliably assess seizure risk, in combination with clinical information, are crucial. Wristbands that continuously record physiological parameters, including electrodermal activity, body temperature, blood volume pressure and actigraphy, may afford monitoring of autonomous nervous system function and movement relevant for such a task, hence minimizing potential complications associated with invasive monitoring, and avoiding stigma associated with bulky external monitoring devices on the head. Here, we use deep learning to analyze long-term, multi-modal wristband sensor data from 50 patients with epilepsy (total duration $>$1400 hours) to assess its capability to distinguish preictal from interictal states. Prediction performance is assessed using area under the receiver operating charateristic (AUC) and improvement over chance (IoC) based on F1 scores. Using one- and two-dimensional convolutional neural networks, we identified better-than-chance predictability in out-of-sample test data in 60% of the patients in leave-one-out and 43% of patients in pseudo-prospective approaches. These results provide a step towards developing easier to apply, non-invasive methods for seizure risk assessments in patients with epilepsy. |
| 2019-03-28 | A Generic Algorithm for Sleep-Wake Cycle Detection using Unlabeled Actigraphy Data | Shanshan Chen et.al. | 1904.05313v1 | null | One key component when analyzing actigraphy data for sleep studies is sleep-wake cycle detection. Most detection algorithms rely on accurate sleep diary labels to generate supervised classifiers, with parameters optimized for a particular dataset. However, once the actigraphy trackers are deployed in the field, labels for training models and validating detection accuracy are often not available. In this paper, we propose a generic, training-free algorithm to detect sleep-wake cycles from minute-by-minute actigraphy. Leveraging a robust nonlinear parametric model, our proposed method refines the detection region by searching for a single change point within bounded regions defined by the parametric model. Challenged by the absence of ground truth labels, we also propose an evaluation metric dedicated to this problem. Tested on week-long actigraphy from 112 children, the results show that the proposed algorithm improves on the baseline model consistently and significantly (p<3e-15). Moreover, focusing on the commonality in human circadian rhythm captured by actigraphy, the proposed method is generic to data collected by various actigraphy trackers, circumventing the laborious label collection step in developing customized classifiers for sleep detection. |
| 2019-02-10 | Classifying attention deficit hyperactivity disorder in children with non-linearities in actigraphy | Jeremi K. Ochab et.al. | 1902.03530v1 | null | Objective This study provides an objective measure based on actigraphy for Attention Deficit Hyperactivity Disorder (ADHD) diagnosis in children. We search for motor activity features that could allow further investigation into their association with other neurophysiological disordered traits. Method The study involved |
| 2018-12-03 | A Hidden Markov Model Based Unsupervised Algorithm for Sleep/Wake Identification Using Actigraphy | Xinyue Li et.al. | 1812.00553v2 | null | Actigraphy is widely used in sleep studies but lacks a universal unsupervised algorithm for sleep/wake identification. In this study, we proposed a Hidden Markov Model (HMM) based unsupervised algorithm that can automatically and effectively infer sleep/wake states. It is an individualized data-driven approach that analyzes actigraphy from each individual respectively to learn activity characteristics and further separate sleep and wake states. We used Actiwatch and polysomnography (PSG) data from 43 individuals in the Multi-Ethnic Study of Atherosclerosis to evaluate the performance of our method. Epoch-by-epoch comparisons were made between our HMM algorithm and that embedded in the Actiwatch software (AS). The percent agreement between HMM and PSG was 85.7%, and that between AS and PSG was 84.7%. Positive predictive values for sleep epochs were 85.6% and 84.6% for HMM and AS, respectively, and 95.5% and 85.6% for wake epochs. Both methods have similar performance and tend to overestimate sleep and underestimate wake compared to PSG. Our HMM approach is able to quantify the variability in activity counts that allow us to differentiate relatively active and sedentary individuals: individuals with higher estimated variabilities tend to show more frequent sedentary behaviors. In conclusion, our unsupervised data-driven HMM algorithm achieves slightly better performance compared to the commonly used algorithm in the Actiwatch software. HMM can help expand the application of actigraphy in large-scale studies and in cases where intrusive PSG is hard to acquire or unavailable. In addition, the estimated HMM parameters can characterize individual activity patterns that can be utilized for further analysis. |
| 2018-08-20 | Bayesian Function-on-Scalars Regression for High Dimensional Data | Daniel R. Kowal et.al. | 1808.06689v2 | null | We develop a fully Bayesian framework for function-on-scalars regression with many predictors. The functional data response is modeled nonparametrically using unknown basis functions, which produces a flexible and data-adaptive functional basis. We incorporate shrinkage priors that effectively remove unimportant scalar covariates from the model and reduce sensitivity to the number of (unknown) basis functions. For variable selection in functional regression, we propose a decision theoretic posterior summarization technique, which identifies a subset of covariates that retains nearly the predictive accuracy of the full model. Our approach is broadly applicable for Bayesian functional regression models, and unlike existing methods provides joint rather than marginal selection of important predictor variables. Computationally scalable posterior inference is achieved using a Gibbs sampler with linear time complexity in the number of predictors. The resulting algorithm is empirically faster than existing frequentist and Bayesian techniques, and provides joint estimation of model parameters, prediction and imputation of functional trajectories, and uncertainty quantification via the posterior distribution. A simulation study demonstrates improvements in estimation accuracy, uncertainty quantification, and variable selection relative to existing alternatives. The methodology is applied to actigraphy data to investigate the association between intraday physical activity and responses to a sleep questionnaire. |
| 2018-04-25 | The Intelligent ICU Pilot Study: Using Artificial Intelligence Technology for Autonomous Patient Monitoring | Anis Davoudi et.al. | 1804.10201v2 | null | Currently, many critical care indices are repetitively assessed and recorded by overburdened nurses, e.g. physical function or facial pain expressions of nonverbal patients. In addition, many essential information on patients and their environment are not captured at all, or are captured in a non-granular manner, e.g. sleep disturbance factors such as bright light, loud background noise, or excessive visitations. In this pilot study, we examined the feasibility of using pervasive sensing technology and artificial intelligence for autonomous and granular monitoring of critically ill patients and their environment in the Intensive Care Unit (ICU). As an exemplar prevalent condition, we also characterized delirious and non-delirious patients and their environment. We used wearable sensors, light and sound sensors, and a high-resolution camera to collected data on patients and their environment. We analyzed collected data using deep learning and statistical analysis. Our system performed face detection, face recognition, facial action unit detection, head pose detection, facial expression recognition, posture recognition, actigraphy analysis, sound pressure and light level detection, and visitation frequency detection. We were able to detect patient's face (Mean average precision (mAP)=0.94), recognize patient's face (mAP=0.80), and their postures (F1=0.94). We also found that all facial expressions, 11 activity features, visitation frequency during the day, visitation frequency during the night, light levels, and sound pressure levels during the night were significantly different between delirious and non-delirious patients (p-value<0.05). In summary, we showed that granular and autonomous monitoring of critically ill patients and their environment is feasible and can be used for characterizing critical care conditions and related environment factors. |
| 2018-03-31 | Continuous Circadian Phase Estimation Using Adaptive Notch Filter | Wei Qiao et.al. | 1804.00115v1 | null | Actigraphy has been widely used for the analysis of circadian rhythm. Current practice applies regression analysis to data from multiple days to estimate the circadian phase. This paper presents a filtering method for online processing of biometric data to estimate the circadian phase. We apply the proposed method on actigraphy data of fruit flies (Drosophila melanogaster). |
| 2018-02-22 | Actigraphy-based Sleep/Wake Pattern Detection using Convolutional Neural Networks | Lena Granovsky et.al. | 1802.07945v1 | null | Common medical conditions are often associated with sleep abnormalities. Patients with medical disorders often suffer from poor sleep quality compared to healthy individuals, which in turn may worsen the symptoms of the disorder. Accurate detection of sleep/wake patterns is important in developing personalized digital markers, which can be used for objective measurements and efficient disease management. Big Data technologies and advanced analytics methods hold the promise to revolutionize clinical research processes, enabling the effective blending of digital data into clinical trials. Actigraphy, a non-invasive activity monitoring method is heavily used to detect and evaluate activities and movement disorders, and assess sleep/wake behavior. In order to study the connection between sleep/wake patterns and a cluster headache disorder, activity data was collected using a wearable device in the course of a clinical trial. This study presents two novel modeling schemes that utilize Deep Convolutional Neural Networks (CNN) to identify sleep/wake states. The proposed methods are a sequential CNN, reminiscent of the bi-directional CNN for slot filling, and a Multi-Task Learning (MTL) based model. Furthermore, we expand standard "Sleep" and "Wake" activity states space by adding the "Falling asleep" and "Siesta" states. We show that the proposed methods provide promising results in accurate detection of the expanded sleep/wake states. Finally, we explore the relations between the detected sleep/wake patterns and onset of cluster headache attacks, and present preliminary observations. |
| 2017-12-27 | Co-Morbidity Exploration on Wearables Activity Data Using Unsupervised Pre-training and Multi-Task Learning | Karan Aggarwal et.al. | 1712.09527v1 | null | Physical activity and sleep play a major role in the prevention and management of many chronic conditions. It is not a trivial task to understand their impact on chronic conditions. Currently, data from electronic health records (EHRs), sleep lab studies, and activity/sleep logs are used. The rapid increase in the popularity of wearable health devices provides a significant new data source, making it possible to track the user's lifestyle real-time through web interfaces, both to consumer as well as their healthcare provider, potentially. However, at present there is a gap between lifestyle data (e.g., sleep, physical activity) and clinical outcomes normally captured in EHRs. This is a critical barrier for the use of this new source of signal for healthcare decision making. Applying deep learning to wearables data provides a new opportunity to overcome this barrier. To address the problem of the unavailability of clinical data from a major fraction of subjects and unrepresentative subject populations, we propose a novel unsupervised (task-agnostic) time-series representation learning technique called act2vec. act2vec learns useful features by taking into account the co-occurrence of activity levels along with periodicity of human activity patterns. The learned representations are then exploited to boost the performance of disorder-specific supervised learning models. Furthermore, since many disorders are often related to each other, a phenomenon referred to as co-morbidity, we use a multi-task learning framework for exploiting the shared structure of disorder inducing life-style choices partially captured in the wearables data. Empirical evaluation using actigraphy data from 4,124 subjects shows that our proposed method performs and generalizes substantially better than the conventional time-series symbolic representational methods and task-specific deep learning models. |
| 2017-12-18 | Activity and Circadian Rhythm of Sepsis Patients in the Intensive Care Unit | Anis Davoudi et.al. | 1712.06631v1 | null | Early mobilization of critically ill patients in the Intensive Care Unit (ICU) can prevent adverse outcomes such as delirium and post-discharge physical impairment. To date, no studies have characterized activity of sepsis patients in the ICU using granular actigraphy data. This study characterizes the activity of sepsis patients in the ICU to aid in future mobility interventions. We have compared the actigraphy features of 24 patients in four groups: Chronic Critical Illness (CCI) sepsis patients in the ICU, Rapid Recovery (RR) sepsis patients in the ICU, non-sepsis ICU patients (control-ICU), and healthy subjects. We used several statistical and circadian rhythm features extracted from the patients' actigraphy data collected over a five-day period. Our results show that the four groups are significantly different in terms of activity features. In addition, we observed that the CCI and control-ICU patients show less regularity in their circadian rhythm compared to the RR patients. These results show the potential of using actigraphy data for guiding mobilization practices, classifying sepsis recovery subtype, as well as for tracking patients' recovery. |
| 2017-11-02 | Sleep Stage Classification Based on Multi-level Feature Learning and Recurrent Neural Networks via Wearable Device | Xin Zhang et.al. | 1711.00629v1 | null | This paper proposes a practical approach for automatic sleep stage classification based on a multi-level feature learning framework and Recurrent Neural Network (RNN) classifier using heart rate and wrist actigraphy derived from a wearable device. The feature learning framework is designed to extract low- and mid-level features. Low-level features capture temporal and frequency domain properties and mid-level features learn compositions and structural information of signals. Since sleep staging is a sequential problem with long-term dependencies, we take advantage of RNNs with Bidirectional Long Short-Term Memory (BLSTM) architectures for sequence data learning. To simulate the actual situation of daily sleep, experiments are conducted with a resting group in which sleep is recorded in resting state, and a comprehensive group in which both resting sleep and non-resting sleep are included.We evaluate the algorithm based on an eight-fold cross validation to classify five sleep stages (W, N1, N2, N3, and REM). The proposed algorithm achieves weighted precision, recall and F1 score of 58.0%, 60.3%, and 58.2% in the resting group and 58.5%, 61.1%, and 58.5% in the comprehensive group, respectively. Various comparison experiments demonstrate the effectiveness of feature learning and BLSTM. We further explore the influence of depth and width of RNNs on performance. Our method is specially proposed for wearable devices and is expected to be applicable for long-term sleep monitoring at home. Without using too much prior domain knowledge, our method has the potential to generalize sleep disorder detection. |
| 2017-05-10 | Visualization of Wearable Data and Biometrics for Analysis and Recommendations in Childhood Obesity | Michael Aupetit et.al. | 1705.03691v1 | null | Obesity is one of the major health risk factors be- hind the rise of non-communicable conditions. Understanding the factors influencing obesity is very complex since there are many variables that can affect the health behaviors leading to it. Nowadays, multiple data sources can be used to study health behaviors, such as wearable sensors for physical activity and sleep, social media, mobile and health data. In this paper we describe the design of a dashboard for the visualization of actigraphy and biometric data from a childhood obesity camp in Qatar. This dashboard allows quantitative discoveries that can be used to guide patient behavior and orient qualitative research. |
| 2017-02-13 | On multifractals: a non-linear study of actigraphy data | Lucas Gabriel Souza França et.al. | 1702.03912v2 | link | This work aimed, to determine the characteristics of activity series from fractal geometry concepts application, in addition to evaluate the possibility of identifying individuals with fibromyalgia. Activity level data were collected from 27 healthy subjects and 27 fibromyalgia patients, with the use of clock-like devices equipped with accelerometers, for about four weeks, all day long. The activity series were evaluated through fractal and multifractal methods. Hurst exponent analysis exhibited values according to other studies ( |
| 2016-09-12 | Hearables: Multimodal physiological in-ear sensing | Valentin Goverdovsky et.al. | 1609.03330v2 | null | Future health systems require the means to assess and track the neural and physiological function of a user over long periods of time and in the community. Human body responses are manifested through multiple modalities, such as the mechanical, electrical and chemical; yet current physiological monitors (actigraphy, heart rate) largely lack in both the desired cross-modal and non-stigmatizing aspects. We address these challenges through an inconspicuous and comfortable earpiece, equipped with miniature multimodal sensors, which benefits from the relatively stable position of the ear canal with respect to vital organs to robustly measure the brain, cardiac and respiratory functions. Comprehensive experiments validate each modality within the proposed earpiece, while its potential in health monitoring is illustrated through case studies. We further demonstrate how combining data from multiple sensors within such an integrated wearable device improves both the accuracy of measurements and the ability to deal with artifacts in real-life scenarios. |
| 2016-07-30 | Learning Tree-Structured Detection Cascades for Heterogeneous Networks of Embedded Devices | Hamid Dadkhahi et.al. | 1608.00159v4 | null | In this paper, we present a new approach to learning cascaded classifiers for use in computing environments that involve networks of heterogeneous and resource-constrained, low-power embedded compute and sensing nodes. We present a generalization of the classical linear detection cascade to the case of tree-structured cascades where different branches of the tree execute on different physical compute nodes in the network. Different nodes have access to different features, as well as access to potentially different computation and energy resources. We concentrate on the problem of jointly learning the parameters for all of the classifiers in the cascade given a fixed cascade architecture and a known set of costs required to carry out the computation at each node.To accomplish the objective of joint learning of all detectors, we propose a novel approach to combining classifier outputs during training that better matches the hard cascade setting in which the learned system will be deployed. This work is motivated by research in the area of mobile health where energy efficient real time detectors integrating information from multiple wireless on-body sensors and a smart phone are needed for real-time monitoring and delivering just- in-time adaptive interventions. We apply our framework to two activity recognition datasets as well as the problem of cigarette smoking detection from a combination of wrist-worn actigraphy data and respiration chest band data. |
| 2016-07-24 | Impact of Physical Activity on Sleep:A Deep Learning Based Exploration | Aarti Sathyanarayana et.al. | 1607.07034v1 | null | The importance of sleep is paramount for maintaining physical, emotional and mental wellbeing. Though the relationship between sleep and physical activity is known to be important, it is not yet fully understood. The explosion in popularity of actigraphy and wearable devices, provides a unique opportunity to understand this relationship. Leveraging this information source requires new tools to be developed to facilitate data-driven research for sleep and activity patient-recommendations. In this paper we explore the use of deep learning to build sleep quality prediction models based on actigraphy data. We first use deep learning as a pure model building device by performing human activity recognition (HAR) on raw sensor data, and using deep learning to build sleep prediction models. We compare the deep learning models with those build using classical approaches, i.e. logistic regression, support vector machines, random forest and adaboost. Secondly, we employ the advantage of deep learning with its ability to handle high dimensional datasets. We explore several deep learning models on the raw wearable sensor output without performing HAR or any other feature extraction. Our results show that using a convolutional neural network on the raw wearables output improves the predictive value of sleep quality from physical activity, by an additional 8% compared to state-of-the-art non-deep learning approaches, which itself shows a 15% improvement over current practice. Moreover, utilizing deep learning on raw data eliminates the need for data pre-processing and simplifies the overall workflow to analyze actigraphy data for sleep and physical activity research. |
| Publish Date | Title | Authors | Code | Abstract | |
|---|---|---|---|---|---|
| 2023-07-26 | NeuroHeed: Neuro-Steered Speaker Extraction using EEG Signals | Zexu Pan et.al. | 2307.14303v1 | null | Humans possess the remarkable ability to selectively attend to a single speaker amidst competing voices and background noise, known as selective auditory attention. Recent studies in auditory neuroscience indicate a strong correlation between the attended speech signal and the corresponding brain's elicited neuronal activities, which the latter can be measured using affordable and non-intrusive electroencephalography (EEG) devices. In this study, we present NeuroHeed, a speaker extraction model that leverages EEG signals to establish a neuronal attractor which is temporally associated with the speech stimulus, facilitating the extraction of the attended speech signal in a cocktail party scenario. We propose both an offline and an online NeuroHeed, with the latter designed for real-time inference. In the online NeuroHeed, we additionally propose an autoregressive speaker encoder, which accumulates past extracted speech signals for self-enrollment of the attended speaker information into an auditory attractor, that retains the attentional momentum over time. Online NeuroHeed extracts the current window of the speech signals with guidance from both attractors. Experimental results demonstrate that NeuroHeed effectively extracts brain-attended speech signals, achieving high signal quality, excellent perceptual quality, and intelligibility in a two-speaker scenario. |
| 2023-07-17 | How time window influences biometrics performance: an EEG-based fingerprints connectivity study | Luca Didaci et.al. | 2307.08291v2 | null | EEG-based biometric represents a relatively recent research field that aims to recognize individuals based on their recorded brain activity by means of electroencephalography (EEG). Among the numerous features that have been proposed, connectivity-based approaches represent one of the more promising methods tested so far. In this paper, we investigate how the performance of an EEG biometric system varies with respect to different time windows to understand if it is possible to define the optimal duration of EEG signal that can be used to extract those distinctive features. Overall, the results have shown a pronounced effect of the time window on the biometric performance measured in terms of EER (equal error rate) and AUC (area under the curve), with an evident increase of the biometric performance with an increase of the time window. In conclusion, we want to highlight that EEG connectivity has the potential to represent an optimal candidate as EEG fingerprint and that, in this context, it is very important to define a sufficient time window able to collect the subject specific features. Moreover, our preliminary results show that extending the window size beyond a certain maximum does not improve biometric systems' performance. |
| 2023-07-13 | Corticomorphic Hybrid CNN-SNN Architecture for EEG-based Low-footprint Low-latency Auditory Attention Detection | Richard Gall et.al. | 2307.08501v1 | null | In a multi-speaker "cocktail party" scenario, a listener can selectively attend to a speaker of interest. Studies into the human auditory attention network demonstrate cortical entrainment to speech envelopes resulting in highly correlated Electroencephalography (EEG) measurements. Current trends in EEG-based auditory attention detection (AAD) using artificial neural networks (ANN) are not practical for edge-computing platforms due to longer decision windows using several EEG channels, with higher power consumption and larger memory footprint requirements. Nor are ANNs capable of accurately modeling the brain's top-down attention network since the cortical organization is complex and layer. In this paper, we propose a hybrid convolutional neural network-spiking neural network (CNN-SNN) corticomorphic architecture, inspired by the auditory cortex, which uses EEG data along with multi-speaker speech envelopes to successfully decode auditory attention with low latency down to 1 second, using only 8 EEG electrodes strategically placed close to the auditory cortex, at a significantly higher accuracy of 91.03%, compared to the state-of-the-art. Simultaneously, when compared to a traditional CNN reference model, our model uses ~15% fewer parameters at a lower bit precision resulting in ~57% memory footprint reduction. The results show great promise for edge-computing in brain-embedded devices, like smart hearing aids. |
| 2023-07-06 | A Hybrid End-to-End Spatio-Temporal Attention Neural Network with Graph-Smooth Signals for EEG Emotion Recognition | Shadi Sartipi et.al. | 2307.03068v1 | null | Recently, physiological data such as electroencephalography (EEG) signals have attracted significant attention in affective computing. In this context, the main goal is to design an automated model that can assess emotional states. Lately, deep neural networks have shown promising performance in emotion recognition tasks. However, designing a deep architecture that can extract practical information from raw data is still a challenge. Here, we introduce a deep neural network that acquires interpretable physiological representations by a hybrid structure of spatio-temporal encoding and recurrent attention network blocks. Furthermore, a preprocessing step is applied to the raw data using graph signal processing tools to perform graph smoothing in the spatial domain. We demonstrate that our proposed architecture exceeds state-of-the-art results for emotion classification on the publicly available DEAP dataset. To explore the generality of the learned model, we also evaluate the performance of our architecture towards transfer learning (TL) by transferring the model parameters from a specific source to other target domains. Using DEAP as the source dataset, we demonstrate the effectiveness of our model in performing cross-modality TL and improving emotion classification accuracy on DREAMER and the Emotional English Word (EEWD) datasets, which involve EEG-based emotion classification tasks with different stimuli. |
| 2023-07-06 | Trends in Machine Learning and Electroencephalogram (EEG): A Review for Undergraduate Researchers | Nathan Koome Murungi et.al. | 2307.02819v1 | null | This paper presents a systematic literature review on Brain-Computer Interfaces (BCIs) in the context of Machine Learning. Our focus is on Electroencephalography (EEG) research, highlighting the latest trends as of 2023. The objective is to provide undergraduate researchers with an accessible overview of the BCI field, covering tasks, algorithms, and datasets. By synthesizing recent findings, our aim is to offer a fundamental understanding of BCI research, identifying promising avenues for future investigations. |
| 2023-07-06 | Brain Computer Interface (BCI) based on Electroencephalographic (EEG) patterns due to new cognitive tasks | Zahmeeth Sayed Sakkaff et.al. | 2307.02780v1 | null | New mental tasks were investigated for suitability in Brain-Computer Interface (BCI). Electroencephalography (EEG) signals were collected and analyzed to identify these mental tasks. MS Windows-based software was developed for investigating and classifying recorded EEG data with unnecessary frequencies filtered out with Bandpass filtering. To identify the best feature vector construction method for a given mental task, feature vectors were constructed using Bandpower, Principal Component Analysis, and Downsampling separately. These feature vectors were then classified with Linear Discriminant Analysis, Linear Support Vector Machines, Critical Distance Classifiers, Nearest Neighbor Classifiers, and their Non-Linear counterparts to find the best-performing classifier. For comparison purposes, performances of already well-known mental tasks in the BCI community were computed along with that of new mental tasks introduced in this thesis. In the preliminary studies, it was found that the most promising new mental task which a BCI system could identify is the imagination of hitting a given square with an imaginary arrow from above (or below) and right, (or left) to the screen. The group of these mental tasks was named as 'Hit Series' (HS). A detailed investigation of HS was carried out and compared with the performance of Motor Imagery (MI) events which are the most heavily used mental tasks in EEG-based BCI systems. One subject achieved the maximum average performance for HS, 100 pct in the binary classifications while 99 pct in overall combined performance. The best average performances of the other two subjects for the same mental tasks were 93 pct and 87pct with the overall performance of 89 pct and 78 pct. Performances of the same three subjects for mental tasks in MI were relatively poor. The average performances were 92, 78, and 92 pct while overall performances were 87, 69, and 88 pct. |
| 2023-07-04 | K-complex Detection Using Fourier Spectrum Analysis In EEG | Alexey Protopopov et.al. | 2307.01754v1 | null | K-complexes are an important marker of brain activity and are used both in clinical practice to perform sleep scoring, and in research. However, due to the size of electroencephalography (EEG) records, as well as the subjective nature of K-complex detection performed by somnologists, it is reasonable to automate K-complex detection. Previous works in this field of research have relied on the values of true positive rate and false positive rate to quantify the effectiveness of proposed methods, however this set of metrics may be misleading. The objective of the present research is to find a more accurate set of metrics and use them to develop a new method of K-complex detection, which would not rely on neural networks. Thus, the present article proposes two new methods for K-complex detection based on the fast Fourier transform. The results achieved demonstrated that the proposed methods offered a quality of K-complex detection that is either similar or superior to the quality of the methods demonstrated in previous works, including the methods employing neural networks, while requiring less computational power, meaning that K-complex detection does not require the use of neural networks. The proposed methods were evaluated using a new set of metrics, which is more representative of the quality of K-complex detection. |
| 2023-07-04 | Sensors and Systems for Monitoring Mental Fatigue: A systematic review | Prabin Sharma et.al. | 2307.01666v1 | null | Mental fatigue is a leading cause of motor vehicle accidents, medical errors, loss of workplace productivity, and student disengagements in e-learning environment. Development of sensors and systems that can reliably track mental fatigue can prevent accidents, reduce errors, and help increase workplace productivity. This review provides a critical summary of theoretical models of mental fatigue, a description of key enabling sensor technologies, and a systematic review of recent studies using biosensor-based systems for tracking mental fatigue in humans. We conducted a systematic search and review of recent literature which focused on detection and tracking of mental fatigue in humans. The search yielded 57 studies (N=1082), majority of which used electroencephalography (EEG) based sensors for tracking mental fatigue. We found that EEG-based sensors can provide a moderate to good sensitivity for fatigue detection. Notably, we found no incremental benefit of using high-density EEG sensors for application in mental fatigue detection. Given the findings, we provide a critical discussion on the integration of wearable EEG and ambient sensors in the context of achieving real-world monitoring. Future work required to advance and adapt the technologies toward widespread deployment of wearable sensors and systems for fatigue monitoring in semi-autonomous and autonomous industries is examined. |
| 2023-06-27 | Network inference in a stochastic multi-population neural mass model via approximate Bayesian computation | Susanne Ditlevsen et.al. | 2306.15787v1 | link | In this article, we propose a 6N-dimensional stochastic differential equation (SDE), modelling the activity of N coupled populations of neurons in the brain. This equation extends the Jansen and Rit neural mass model, which has been introduced to describe human electroencephalography (EEG) rhythms, in particular signals with epileptic activity. Our contributions are threefold: First, we introduce this stochastic N-population model and construct a reliable and efficient numerical method for its simulation, extending a splitting procedure for one neural population. Second, we present a modified Sequential Monte Carlo Approximate Bayesian Computation (SMC-ABC) algorithm to infer both the continuous and the discrete model parameters, the latter describing the coupling directions within the network. The proposed algorithm further develops a previous reference-table acceptance rejection ABC method, initially proposed for the inference of one neural population. On the one hand, the considered SMC-ABC approach reduces the computational cost due to the basic acceptance-rejection scheme. On the other hand, it is designed to account for both marginal and coupled interacting dynamics, allowing to identify the directed connectivity structure. Third, we illustrate the derived algorithm on both simulated data and real multi-channel EEG data, aiming to infer the brain's connectivity structure during epileptic seizure. The proposed algorithm may be used for parameter and network estimation in other multi-dimensional coupled SDEs for which a suitable numerical simulation method can be derived. |
| 2023-06-23 | Virtual Reality Sickness Reduces Attention During Immersive Experiences | Katherine J. Mimnaugh et.al. | 2306.13505v1 | null | In this paper, we show that Virtual Reality (VR) sickness is associated with a reduction in attention, which was detected with the P3b Event-Related Potential (ERP) component from electroencephalography (EEG) measurements collected in a dual-task paradigm. We hypothesized that sickness symptoms such as nausea, eyestrain, and fatigue would reduce the users' capacity to pay attention to tasks completed in a virtual environment, and that this reduction in attention would be dynamically reflected in a decrease of the P3b amplitude while VR sickness was experienced. In a user study, participants were taken on a tour through a museum in VR along paths with varying amounts of rotation, shown previously to cause different levels of VR sickness. While paying attention to the virtual museum (the primary task), participants were asked to silently count tones of a different frequency (the secondary task). Control measurements for comparison against the VR sickness conditions were taken when the users were not wearing the Head-Mounted Display (HMD) and while they were immersed in VR but not moving through the environment. This exploratory study shows, across multiple analyses, that the effect mean amplitude of the P3b collected during the task is associated with both sickness severity measured after the task with a questionnaire (SSQ) and with the number of counting errors on the secondary task. Thus, VR sickness may impair attention and task performance, and these changes in attention can be tracked with ERP measures as they happen, without asking participants to assess their sickness symptoms in the moment. |
| 2023-06-21 | Reporting existing datasets for automatic epilepsy diagnosis and seizure detection | Palak Handa et.al. | 2306.12292v1 | null | More than 50 million individuals are affected by epilepsy, a chronic neurological disorder characterized by unprovoked, recurring seizures and psychological symptoms. Researchers are working to automatically detect or predict epileptic episodes through Electroencephalography (EEG) signal analysis, and machine, and deep learning methods. Good quality, open-source, and free EEG data acts as a catalyst in this ongoing battle to manage this disease. This article presents 40+ publicly available EEG datasets for adult and pediatric human populations from 2001-2023. A comparative analysis and discussion on open and private EEG datasets have been done based on objective parameters in this domain. Bonn and CHB-MIT remain the benchmark datasets used for the automatic detection of epileptic and seizure EEG signals. Meta-data has also been released for large EEG data like CHB-MIT. This article will be updated every year to report the progress and changing trends in the development of EEG datasets in this field. |
| 2023-06-13 | Empirical Measurement of Aesthetic Experience of Music | Abhishek Gupta et.al. | 2306.07802v1 | null | Chills or goosebumps, also called frisson, is a phenomenon that is often associated with an aesthetic experience e.g., music or some other ecstatic experience. The temporal and spatial cause of frisson in the brain has been one of the biggest mysteries of human nature. Accumulating evidence suggests that aesthetic, namely subjective, affective, and evaluative processes are at play while listening to music, hence, it is an important subjective stimulus for systematic investigation. Advances in neuroimaging and cognitive neuroscience, have given impetus to neuro-aesthetics, a novel approach to music providing a phenomenological brain-based framework for the aesthetic experience of music with the potential to open the scope for future research. In this paper, we present an affordable, wearable, easy-to-carry device to measure phenomenological goosebumps intensity on our skin with respect to real-time data using IoT devices (Raspberry pi 3, model B). To test the device subjects were asked to provide a list of songs that elicit goosebumps. Wireless earphones were provided, allowing participants to walk around and dance while listening to their music. (Some subjects moved during sessions). Results indicate that goosebumps were reliably detected by the device after visual inspection of the videos/music. The effective measurement when interfaced with neurophysiological devices such as electroencephalography (EEG) can help interpret biomarkers of ecstatic emotions. The second part of the study focuses on identifying primary brain regions involved in goosebump experience during musical stimulation. |
| 2023-06-10 | TS-MoCo: Time-Series Momentum Contrast for Self-Supervised Physiological Representation Learning | Philipp Hallgarten et.al. | 2306.06522v1 | link | Limited availability of labeled physiological data often prohibits the use of powerful supervised deep learning models in the biomedical machine intelligence domain. We approach this problem and propose a novel encoding framework that relies on self-supervised learning with momentum contrast to learn representations from multivariate time-series of various physiological domains without needing labels. Our model uses a transformer architecture that can be easily adapted to classification problems by optimizing a linear output classification layer. We experimentally evaluate our framework using two publicly available physiological datasets from different domains, i.e., human activity recognition from embedded inertial sensory and emotion recognition from electroencephalography. We show that our self-supervised learning approach can indeed learn discriminative features which can be exploited in downstream classification tasks. Our work enables the development of domain-agnostic intelligent systems that can effectively analyze multivariate time-series data from physiological domains. |
| 2023-06-05 | Gotta Go Fast: Measuring Input/Output Latencies of Virtual Reality 3D Engines for Cognitive Experiments | Taeho Kang et.al. | 2306.02637v1 | null | Virtual Reality (VR) is seeing increased adoption across many fields. The field of experimental cognitive science is also testing utilization of the technology combined with physiological measures such as electroencephalography (EEG) and eye tracking. Quantitative measures of human behavior and cognition process, however, are sensitive to minuscule time resolutions that are often overlooked in the scope of consumer-level VR hardware and software stacks. In this preliminary study, we implement VR testing environments in two prominent 3D Virtual Reality frameworks (Unity and Unreal Engine) to measure latency values for stimulus onset execution code to Head-Mount Display (HMD) pixel change, as well as the latency between human behavioral response input to its registration in the engine environment under a typical cognitive experiment hardware setup. We find that whereas the specifics of the latency may further be influenced by different hardware and software setups, the variations in consumer hardware is apparent regardless and report detailed statistics on these latencies. Such consideration should be taken into account when designing VR-based cognitive experiments that measure human behavior. |
| 2023-05-22 | Towards Ultrasound Tongue Image prediction from EEG during speech production | Tamás Gábor Csapó et.al. | 2306.05374v1 | link | Previous initial research has already been carried out to propose speech-based BCI using brain signals (e.g.~non-invasive EEG and invasive sEEG / ECoG), but there is a lack of combined methods that investigate non-invasive brain, articulation, and speech signals together and analyze the cognitive processes in the brain, the kinematics of the articulatory movement and the resulting speech signal. In this paper, we describe our multimodal (electroencephalography, ultrasound tongue imaging, and speech) analysis and synthesis experiments, as a feasibility study. We extend the analysis of brain signals recorded during speech production with ultrasound-based articulation data. From the brain signal measured with EEG, we predict ultrasound images of the tongue with a fully connected deep neural network. The results show that there is a weak but noticeable relationship between EEG and ultrasound tongue images, i.e. the network can differentiate articulated speech and neutral tongue position. |
| 2023-05-19 | Energy-efficient memcapacitive physical reservoir computing system for temporal data processing | Md Razuan Hossain et.al. | 2305.12025v1 | null | Reservoir computing is a highly efficient machine learning framework for processing temporal data by extracting features from the input signal and mappi |
