Mikrotik-CapsMan

• Web UI for Mikrotik CapsMan/WiFi interface
• HTTP Notification engine for CapsMan/WiFi client changes

UI generates a dedicated and periodically updated WEB page with list of WiFi clients, that are connected to CapsMan. List is filled with extra information from Mikrotik DHCP Server.

UI contains:

• CapsMan interface name
• SSID
• Client MAC address
• Client IP address (from DHCP)
• Signal strength level
• Hostname (from DHCP)
• Comment (from DHCP)

Supported configuration params:

• -config - Name of configuration file (default: config.yml, example: -config config-custom.yml)

Supported parameters in configuration file:

• Router configuration
  • mode - operation mode (CapsMan / WiFi)
  • address - IP address and port of API interface (normally 8728)
  • username - Login for API connection
  • password - Password for API connection
  • interval - Polling interval (examples: 5s, 1m, ...)
• DHCP Server configuration (only Mikrotik DHCP server is supported), optional
  • address - IP address and port of API interface (normally 8728)
  • username - Login for API connection
  • password - Password for API connection
  • interval - Polling interval (examples: 5s, 1m, ...)
• Device list (personal configuration for each device)
  • name - Name, that will be displayed in interface
  • mac - MAC address of this device
  • on.connect - Action for connect event
  • on.disconnect - Action for disconnect event
  • on.roaming - Action for roaming between AP's (for CapsMan mode)
  • on.level - Action for signal level change

Each on.* event have the following configuration fields:

• http.post - URL for HTTP Post request with template support
• http.get - URL for HTTP Get request with templates (will be used if there is no http.post line)
• http.post.content - Content for HTTP Post request
• http.header - List of HTTP headers, that should be added into request (can be used for authentification/configuration of content-type and so on)

Supported template variables for http.post, http.get and http.post.content fields:

• name - Name of device (from configuration)
• mac - MAC address of device
• roaming.to - During roaming, name of New AP
• roaming.from - During roaming, name of OLD AP
• level.to - During level change, value of new signal level
• level.from - During level change, value of old signal level

WEB UI is published at: http://listen/

Future plans

• Add configuration file with support of human-readable names for specific MAC addresses
• Add MQTT Support with publishing of WiFi client state for intergration with HomeAssistant or other smart house servers

Have any ideas? Feel free to send change requests.