caddy-imagefilter

This package can transform images from the file system in various ways.

Supported formats are:

JPEG
GIF
PNG
BMP
TIFF
WEBP (only input)

There is currently no pure go WEBP library, that can encode (not just decode) WEBP images (maybe someday). Therefore, images in WEBP will be encoded as PNG as fallback.

It's recommended to keep transformed images in a cache to improve response times and don't do transformation over and over again.

Changes in `v2`

The version of the module got some internal refactoring, so the implemented image filters are actually caddy modules. It makes the whole architecture more in line with how the extensibility should work in caddy.

If you are using the module the only thing that changes is the installation. The configuration via Caddyfile is working exactly the same.

Installation

With Default filters

xcaddy build --with github.com/ueffel/caddy-imagefilter/v2/defaults

See Default filters.

With All filters

xcaddy build --with github.com/ueffel/caddy-imagefilter/v2/all

This includes Default filters as well as Additional filters

With Individual filters

xcaddy build --with github.com/ueffel/caddy-imagefilter/v2/fit

or

xcaddy build --with github.com/ueffel/caddy-imagefilter/v2/fit --with github.com/ueffel/caddy-imagefilter/v2/resize

or any other combination.

Configuration

Ordering the directive

{
    order image_filter before file_server
}

Syntax

image_filter [<matcher>] {
    fs              <backend>
    root            <path>
    jpeg_quality    <quality>
    png_compression <level>
    max_concurrent  <level>

    # included filters
    <filters...> <filter-args...>
}

fs specifies an alternate (perhaps virtual) file system to use. Any Caddy module in the caddy.fs namespace can be used here. Any root path/prefix will still apply to alternate file system modules. By default, the local disk is used.
root sets the path to the site root for just this file server instance, overriding any other. Default: {http.vars.root} or the current working directory. Note: This subdirective only changes the root for this directive. For other directives (like try_files or templates) to know the same site root, use the root directive, not this subdirective.
jpeg_quality determines the quality of jpeg encoding after the filters are applied. It ranges from 1 to 100 inclusive, higher is better. Default is 75.
png_compression determines the compression of png images. Possible values are:
- 0: Default compression
- -1: no compression
- -2: fastest compression
- -3: best compression
max_concurrent determines how many requests can be served concurrently. This is intended to reduce excessive cpu/memory usage for image transformations by limiting the number of parallel calculations. Any value less or equal 0 means no limit. Default is 0.
<filters...> is a list of filters with their corresponding arguments, that are applied in order of definition.
<filter-args...> support caddy placeholders.

At least one filter has to be configured or this would be just an inefficient file_server. No filters configured is therefore considered invalid and will emit an error on start.

Examples

{
    order image_filter before file_server
}

:80 {
    @thumbnail {
        path_regexp thumb /.+\.(jpg|jpeg|png|gif|bmp|tif|tiff|webp)$
        query w=*
        query h=*
    }

    image_filter @thumbnail {
        fit {query.w} {query.h}
    }
}

Produces are scaled version of an image, that fits within a rectangle with width w and height h. w and h are query parameters. For example: http://localhost/image.png?w=400&h=225

{
    order image_filter before file_server
}

:80 {
    @thumbnail {
        path_regexp thumb /w(400|800)(/.+\.(jpg|jpeg|png|gif|bmp|tif|tiff|webp))$
    }
    handle @thumbnail {
        rewrite {re.thumb.2}
        image_filter {
            resize {re.thumb.1} 0
        }
    }
}

This configuration takes a parameter from the path and only allows a limited number of dimensions (400 or 800) for resizing. For example: http://localhost/w400/image.png. It then resizes the image down to the width while keeping the aspect ratio preserved (height is 0, see resize). The rest of the path after w400 is the file path to the image. (/image.png)

(The internal ordering of directives is important here (global order directive), image_filter has to run after rewrite)

image_filter {
    crop 500 500 topleft
    rotate 180
    flip v
    resize 200 400
    sharpen
}

You can go crazy and combine many filters. (But no more than 9999, which should quite sufficient, or you're doing something seriously wrong)

Default filters

crop

Crop produces a cropped image as rectangular region of a specific size.

Syntax:

    crop <width> <height> [<anchor>]

Parameters:

width must be a positive integer and determines the width of the cropped image.
height must be a positive integer and determines the height of the cropped image.
anchor determines the anchor point of the rectangular region that is cut out. Possible values are: center, topleft, top, topright, left, right, bottomleft, bottom, bottomright. Default is center.

Installation: --with github.com/ueffel/caddy-imagefilter/v2/crop

fit

Fit scales an image to fit to the specified maximum width and height using a linear filter, the image aspect ratio is preserved. If the image already fits inside the bounds, nothing will be done.

Syntax:

    fit <width> <height>

Parameters:

width must be a positive integer and determines the maximum width.
height must be a positive integer and determines the maximum height.

Installation: --with github.com/ueffel/caddy-imagefilter/v2/fit

flip

Flip flips (mirrors) an image vertically or horizontally.

Syntax:

    flip <h|v>

Parameters:

h|v determines if the image flipped horizontally or vertically.

Installation: --with github.com/ueffel/caddy-imagefilter/v2/flip

resize

Resize can downsize images. If upsizing of an image is detected, nothing will be done and the input image is returned unchanged.

Syntax:

    resize <width> <height>

Parameters:

width must be a positive integer and determines the maximum width.
height must be a positive integer and determines the maximum height.

Either width or height can be 0, then the image aspect ratio is preserved.

Installation: --with github.com/ueffel/caddy-imagefilter/v2/resize

rotate

Rotate rotates an image 90, 180 or 270 degrees counter-clockwise.

Syntax:

    rotate <angle>

Parameters:

angle is one of the following: 0, 90, 180, 270 (0 is valid, but nothing will be done to the image).

Installation: --with github.com/ueffel/caddy-imagefilter/v2/rotate

sharpen

Sharpen produces a sharpened version of the image.

Syntax:

    sharpen [<sigma>]

Parameters:

sigma must be a positive floating point number and indicates how much the image will be sharpened. Default is 1.

Installation: --with github.com/ueffel/caddy-imagefilter/v2/sharpen

Additional filters

blur

Blur produces a blurred version of the image.

Syntax:

    blur [<sigma>]

Parameters:

sigma must be a positive floating point number and indicates how much the image will be blurred. Default is 1.

Installation: --with github.com/ueffel/caddy-imagefilter/v2/blur

grayscale

Grayscale produces a gray scaled version of the image.

Syntax:

    grayscale

no parameters.

Installation: --with github.com/ueffel/caddy-imagefilter/v2/grayscale

invert

Invert produces an inverted (negated) version of the image.

Syntax:

    invert

no parameters.

Installation: --with github.com/ueffel/caddy-imagefilter/v2/invert

rotate_any

RotateAny rotates an image by a specific angle counter-clockwise. Uncovered areas after the rotation are filled with the specified color.

Syntax:

    rotate_any <angle> <color>

Parameters:

angle is the angle as floating point number in degrees by which the image is rotated counter-clockwise.
color is the color which is used to fill uncovered areas after the rotation. Supported formats are:
- "#FFAADD" (in quotes because otherwise it will be a comment in a Caddyfile)
- rgb(255,170,221)
- rgba(255,170,221,0.5)
- transparent, black, white, blue or about 140 more

Installation: --with github.com/ueffel/caddy-imagefilter/v2/rotate_any

smartcrop

Smartcrop finds good rectangular image crops of a specific size. It uses https://github.com/muesli/smartcrop

Syntax:

    smartcrop <width> <height>

Parameters:

width must be a positive integer and determines the width of the cropped image.
height must be a positive integer and determines the height of the cropped image.

Installation: --with github.com/ueffel/caddy-imagefilter/v2/smartcrop

Advanced Configuration

The following configuration uses https://github.com/caddyserver/cache-handler as internal cache, so image transformations are done once per day and then served from the cache. Beware that this cache module is not quite ready for production use, it should just serve as an example here.

{
    order image_filter before file_server
    order cache before rewrite
}

http://:80 {
    root .
    file_server browse
    @thumbnail {
        path_regexp thumb /w(400|800)/.+\.(jpg|jpeg|png|gif|bmp|tif|tiff|webp)$
    }
    reverse_proxy @thumbnail [::1]:9000 {
        header_up Cache-Control "max-age=86400"  # always use cache, even if requested otherwise
        header_down -Server                      # prevents multiple "Server: Caddy" response header
    }
}

http://:9000 { # internal address only accessable from the server itself to transform images
    bind ::1   # local ipv6 address (same as 127.0.0.1 for ipv4)
    cache {
        ttl 24h
    }
    header Cache-Control "max-age=86400" # keep 1 day in cache
    root .
    @thumbnail {
        path_regexp thumb (?i)/w([0-9]+)(/.+)$
    }
    handle @thumbnail {
        rewrite {re.thumb.2}
        image_filter {
            resize {re.thumb.1} 0
        }
    }
}

This could also extended to limit the load because of image filtering by using rate limiting with this module https://github.com/mholt/caddy-ratelimit

Write your own filter

You can use the base module imagefilter to implement your own filter. A new filter modules should be a caddy module and implement the interface imagefilter.Filter. The configured Filter instance then is called at runtime with an image, where the filter operation has to be applied and the resulting image returned. It's recommended to have all configure-parameters as strings, so they can contain caddy placeholders. Before applying the filter the placeholders should be replaced with caddy.Replacer's ReplaceAll.

Take a look at the default filters for implementation pointers.

Name		Name	Last commit message	Last commit date
Latest commit History 22 Commits
all		all
blur		blur
crop		crop
defaults		defaults
fit		fit
flip		flip
grayscale		grayscale
invert		invert
resize		resize
rotate		rotate
rotate_any		rotate_any
sharpen		sharpen
smartcrop		smartcrop
LICENSE		LICENSE
README.md		README.md
go.mod		go.mod
go.sum		go.sum
imagefilter.go		imagefilter.go

License

ueffel/caddy-imagefilter

Folders and files

Latest commit

History

Repository files navigation

caddy-imagefilter

Changes in v2

Installation

With Default filters

With All filters

With Individual filters

Configuration

Ordering the directive

Syntax

Examples

Default filters

crop

fit

flip

resize

rotate

sharpen

Additional filters

blur

grayscale

invert

rotate_any

smartcrop

Advanced Configuration

Write your own filter

About

Topics

Resources

License

Stars

Watchers

Forks

Languages

Changes in `v2`