Custom board used to convert ethernet plug to 4-pin molex connector for the Galactic Aztec Heavy rocket. The board was designed to interface with the Galactic Aztec Heavy Raspberry Pi Add-on: ADC board.
Custom EagleCAD parts on this board can be found in the SDSU Rocket Eagle Libraries.
The ethernet port adheres to the following T-568B wiring configuration:
| Pin | Color | Function |
|---|---|---|
| 1 | Orange/White | |
| 2 | Orange | |
| 3 | Green/White | |
| 4 | Blue | Supply Voltage |
| 5 | Blue/White | Supply Voltage |
| 6 | Green | |
| 7 | Brown/White | Ground |
| 8 | Brown | Ground |
| Qty | Name | Description | Part Number | Vendor |
|---|---|---|---|---|
| 1 | Jack RJ45 CAT5/CAT5e | 380-1046-ND | DigiKey | |
| 1 | Molex Mini Fit Jr. 4-pos Right Angle | WM1352-ND | DigiKey | |
| 1 | D1 | LED Yellow Vf=1.8V If=2mA 0603 | 475-1196-1-ND | DigiKey |
| 1 | R1 | Resistor 15kΩ 1/4W ±1% 0603 | RHM15.0KADCT-ND | DigiKey |