Skip to content

tsaarni/avr-high-voltage-serial-programming

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

2 Commits
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

AVR high-voltage serial programming for ATtiny

Bricked your MCU?

Changing AVR fuse values in an unintended way can render the microcontroller practically dead. For example you might have altered clock source bits in a way that the processor cannot be programmed anymore. Trying to fix the problem by applying default fuse values fails:

$ avrdude -p attiny85 -c usbasp -U lfuse:w:0x62:m -U hfuse:w:0xdf:m -U efuse:w:0xff:m

avrdude: warning: cannot set sck period. please check for usbasp firmware update.
avrdude: error: program enable: target doesn't answer. 1
avrdude: initialization failed, rc=-1
         Double check connections and try again, or use -F to override
         this check.

avrdude done.  Thank you.

Even using slower bitclock does not necessarily work anymore:

$ avrdude -p attiny85 -c usbasp -U lfuse:w:0x62:m -U hfuse:w:0xdf:m -U efuse:w:0xff:m -B1000 -F

avrdude: set SCK frequency to 1000 Hz
avrdude: warning: cannot set sck period. please check for usbasp firmware update.
avrdude: error: program enable: target doesn't answer. 1
avrdude: initialization failed, rc=-1
avrdude: AVR device initialized and ready to accept instructions
avrdude: Device signature = 0x88fb38
avrdude: Expected signature for ATtiny85 is 1E 93 0B

avrdude done.  Thank you.

High-voltage serial programming to the help

Atmel ATtiny datasheet chapter "High-voltage Serial Programming" describes alternative way of programming ATtiny microcontroller. With this mechanism it is possible to bring the MCU back to life.

The code in this project uses Arduino Nano to re-program ATtiny85 microcontroller fuses to default values using the HVSP method. Normal serial programming method can be used again after running the program.

Schematic

Following schema describes the circuit for running the programmer. The circuit requires 12V voltage source for applying 12V to RESET pin of ATtiny85.

schema

About

AVR high-voltage (HV) serial programming for ATtiny

Topics

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages