Skip to content
This repository has been archived by the owner on Dec 4, 2020. It is now read-only.

UEFI Resolution

Jump to bottom
Kris Moore edited this page Jun 6, 2018 · 1 revision

On some systems when booted via UEFI you may end up in a console resolution that isn't supported, resulting in a corrupt display. To work-around this issue you can do the following:

At the boot-loader menu, drop to the Command-Prompt (Under Advanced). Run the command 'gop set 0', replacing 0 with 1/2/3/4 until you find a resolution that seems to work with your system.

Once you've come up with a working resolution you can hard-code it by putting the 'gop set ' command in /boot/loader.rc.local.

Clone this wiki locally