Skip to content

trontrytel/libmpdataxx

 
 

Repository files navigation

libmpdata++ - a library of parallel MPDATA-based solvers for systems of generalised transport equations

Codacy Badge

MPDATA stands for Multidimensional Positive Definite Advection Transport Algorithm. It applies to a variety of problems involving conservation laws in computational fluid dynamics. More generally, it can be used for numerically tackling linear hyperbolic first-order partial differential equation systems. The algorithm was introduced in the context of simulations of atmospheric flows (Smolarkiewicz, 1984).

MPDATA is explicit, forward-in-time, sign-preserving, conservative and non-linearly stable. Through iterative corrections, it achieves high-order accuracy in time and space even for complex flows and problem geometries. The algorithm has been continuously developed over a third of a century resulting in a family of robust numerical schemes with documented applications in computational bio-, geo-, and astro-physics as well as engineering (see Smolarkiewicz, 2006, Smolarkiewicz et al., 2016, for an overview and recent references).

In short, libmpdata++ is a new header-only C++ implementation of MPDATA. The features of the library along with discussion of several example use cases were published in a user-guide-style journal paper: Jaruga et al., 2015.

Compilation of programs that use libmpdata++ requires:

  • a C++11 compliant compiler (optionally with OpenMP support)
  • Blitz++ and Boost C++ libraries
  • HDF5 and gnuplot-iostream libraries (optional, depending on the type of output mechanism chosen)

During development of libmpdata++, we are continuously testing the code on Linux using GCC and LLVM/Clang as well as on OSX using Apple/Clang - these are considered the supported platforms.

Compilation and execution of the examples shipped with libmpdata++ is easiest done using CMake, and the following instructions assume you're using CMake. Some hints on CMake usage are included at the end of this file.

The .travis.yml file shipped with the library contains a complete set of commands needed to build and execute all tests programs shipped with libmpdata++ on fresh Ubuntu and OSX installations - it may contain useful information on obtaining the dependencies. We also provide a Docker image that contains all requirements and the libmpdata++ library.

Installing the library and running tests locally

1. To verify if all dependencies are met, please start with:

  $ cd libmpdata++
  $ mkdir build
  $ cd build
  $ cmake ..
  $ cd ../..

The next two steps are optional test. Running the tests is highly recommended to verify if the library works correctly in your environment. Nevertheless, in principle you can skip to step four and install the library right away.

2. To perform unit tests:

  $ cd tests/unit
  $ mkdir build
  $ cd build
  $ cmake ..
  $ make
  $ make test
  $ cd ../../..

The unit tests should complete in a dozen of seconds.

3. To reproduce all results from the GMD paper:

  $ cd tests/paper_2015_GMD
  $ mkdir build
  $ cd build
  $ cmake ..
  $ make
  $ make test
  $ cd ../../..

This takes ca. 15 minutes on a quad-core laptop. The "make test" command performs simulations, checks the output against reference data (tests/paper_2015_GMD//refdata/) and plots all figures included in the paper. The subfolders of paper_2015_GMD correspond to consecutive chapters in the GMD paper. Some of the scripts run by "make test" require additional packages including Python, Python libraries (NumPy, SciPy, matplotlib) and Paraview.

4. To install the library system-wide, please try:

  $ cd libmpdata++/build
  $ sudo make install

This will copy the libmpdata++ headers into the system include path (e.g. /usr/include/libmpdata++) and copy the libmpdata++-config.cmake file into the system share directory (e.g. /usr/share/libmpdata++) what will allow CMake users to do find_package(libmpdata++).

Some CMake hints:

  • to point CMake to a non-default C++ compiler (e.g. clang++):
  $ cmake .. -DCMAKE_CXX_COMPILER=clang++
  • to alter the installation prefix (e.g. /usr/ instead of /usr/local):
  $ cmake .. -DCMAKE_INSTALL_PREFIX:PATH=/usr
  • to switch between debug and release (default) compilation modes (has to be done after compiler choice):
  $ cmake .. -DCMAKE_BUILD_TYPE=Debug
  $ cmake .. -DCMAKE_BUILD_TYPE=Release
  • two alternative ways of cleaning leftovers from a previous build (including CMake cache files):
  $ rm -rf build/CMakeCache.txt build/CMakeFiles
  $ rm -rf build; mkdir build
  • the output of commands executed by "make test" can be viewed with:
  $ less Testing/Temporary/LastTest.log

Using and testing the library with a Docker image

  • In order to use the image you have to install Docker. Once you have Docker, the image can be downloaded:
docker pull igfuw/libmpdataxx:latest

You can also download an image with a specific version of the library, a full list of available tags can be found here.

  • To run the Docker in interactive mode:
docker run -it --rm igfuw/libmpdataxx:latest

This will open an interactive bash in the container and your working directory will be /usr/local/src/libmpdataxx. You can repeat the step 2 and the step 3 from the previous part to run the tests.

About

work in progress on libmpdata++

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • C++ 87.2%
  • Python 6.5%
  • CMake 5.4%
  • Other 0.9%