Examples and documents about MSP430FR4133 (Texas Instruments) launchpad.

This is the version 2 of my previous CC1101 driver library for MSP430 (https://github.com/abhra0897/MSP430-CC1101-Energia-Library). This time it is much better, with lots of new features, supporting all the frequencies, and works perfectly. Read the readme.md for detailed information.

Texas Instrument MSP430G2553 based development board.

MSP430G2xx3 flashing tool supporting Linux, Windows, and Mac OS.

A set of simple codes that needs only the MSP430G2553 and its Launchpad MSP-EXP430G2 to run

This is my repository where I am storing all my Proteus v8.9 Project Files and these are project files for simulation of Texas Instrument’s MSP430G2553 microcontroller with various example programs. I am keeping the Proteus design files only and some .HEX, .ELF, and .INO files.

An interrupt-driven approach to Arduino programming

A (bit bang) PCD8544 driver based on RobG's SPI version of driver

Robotics Projects

Fallout-inspired post-pocalyptic display.

MSP430G2553 based Adafruit feather compatible board 🪶

A wi-fi connected people counter. Implemented with a pair of ultrasonic transducers, the TI MSP430G2553 microcontroller and the ESP8266 ESP-01 Wi-Fi module.

Jumping Robot was inspired by Watch Dogs 2. It consists of lots of small projects, which can be fun. Let's do this!

A Command Line Interface (CLI) for MSP430G2 LaunchPad

MSP-EXP430G2 LaunchPad programming using Code Composer Studio. The MSP-Exp430G2 Launchpad Development Kit Is An Easy-To-Use Microcontroller Development Board For The Low-Power And Low-Cost MSP430G2X MCUS. It Has On-Board Emulation For Programming And Debugging And Features A 14/20-Pin Dip Socket, On-Board Buttons And Leds &Amp; Boosterpack Plug-…

This is Geiger-Muller Counter

A simple black line following robot made with the MSP430G2553 MCU

msp430 washing machine firmware

Repo for bioreactor control system including heaing, mixing, probe and media units

MSP430 Projects