Update tinyprog to match tinyprog 1.0.23 from PyPI

[ewenmcneill]

tinyprog 1.0.23 on PyPI has changes which do not seem to exist in https://github.com/tinyfpga/TinyFPGA-Bootloader/tree/master/programmer/tinyprog. I've extracted __init__.py out of the tinyprog-1.0.23-py2-none-any.whl file, and added it to this branch/pull request, along with a bump of the version number to match.

When installed from the git branch:

pip install "git+file:///src/tinyfpga/packages/TinyFPGA-Bootloader@tinyprog-1.0.23#egg=tinyprog&subdirectory=programmer" --upgrade

it appears to be able to program a TinyFPGA BX with different status messages from the 1.0.22b1 version currently in GitHub.

tinyprog --program-image build/tinyfpga_bx_base_lm32.minimal//image-gateware+bios+micropython.bin

    TinyProg CLI
    ------------
    Using device id 1d50:6130
    Only one board with active bootloader, using it.
    Programming /dev/ttyACM0 with build/tinyfpga_bx_base_lm32.minimal//image-gateware+bios+micropython.bin
    Programming at addr 028000
    Waking up SPI flash
    442884 bytes to program
    Programming and Verifying: 100%|█████████| 443k/443k [00:10<00:00, 40.4kB/s]
    Success!

In theory something similar would work to try installing it directly from git+https, but I haven't tried that myself as I just installed from the git repo I had checked out.

Ewen

(LX P=tinyfpga_bx.minimal F=micropython) ewen@parthenon:/src/fpga/litex-buildenv$ pip install "git+file:///src/tinyfpga/packages/TinyFPGA-Bootloader@tinyprog-1.0.23#egg=tinyprog&subdirectory=programmer" --upgrade
Collecting tinyprog from git+file:///src/tinyfpga/packages/TinyFPGA-Bootloader@tinyprog-1.0.23#egg=tinyprog&subdirectory=programmer
  Cloning file:///src/tinyfpga/packages/TinyFPGA-Bootloader (to revision tinyprog-1.0.23) to /tmp/pip-install-vmbf5433/tinyprog
Requirement not upgraded as not directly required: pyserial<4,>=3 in ./build/conda/lib/python3.6/site-packages (from tinyprog) (3.4)
Requirement not upgraded as not directly required: jsonmerge<2,>=1.4.0 in ./build/conda/lib/python3.6/site-packages (from tinyprog) (1.5.2)
Requirement not upgraded as not directly required: intelhex<3,>=2.2.1 in ./build/conda/lib/python3.6/site-packages (from tinyprog) (2.2.1)
Requirement not upgraded as not directly required: tqdm<5,>=4.19.5 in ./build/conda/lib/python3.6/site-packages (from tinyprog) (4.29.0)
Requirement not upgraded as not directly required: six in ./build/conda/lib/python3.6/site-packages (from tinyprog) (1.11.0)
Requirement not upgraded as not directly required: packaging in ./build/conda/lib/python3.6/site-packages/packaging-17.1-py3.6.egg (from tinyprog) (17.1)
Requirement not upgraded as not directly required: pyusb in ./build/conda/lib/python3.6/site-packages (from tinyprog) (1.0.2)
Requirement not upgraded as not directly required: jsonschema<3.0.0 in ./build/conda/lib/python3.6/site-packages (from jsonmerge<2,>=1.4.0->tinyprog) (2.6.0)
Requirement not upgraded as not directly required: pyparsing>=2.0.2 in ./build/conda/lib/python3.6/site-packages/pyparsing-2.2.0-py3.6.egg (from packaging->tinyprog) (2.2.0)
Building wheels for collected packages: tinyprog
  Running setup.py bdist_wheel for tinyprog ... done
  Stored in directory: /tmp/pip-ephem-wheel-cache-3z_9b7cv/wheels/ae/af/fa/64759e6c52af34ee04f49108444b736914d073ac1900bb2355
Successfully built tinyprog
Installing collected packages: tinyprog
  Found existing installation: tinyprog 1.0.22b1
    Uninstalling tinyprog-1.0.22b1:
      Successfully uninstalled tinyprog-1.0.22b1
Successfully installed tinyprog-1.0.23
You are using pip version 10.0.1, however version 18.1 is available.
You should consider upgrading via the 'pip install --upgrade pip' command.
(LX P=tinyfpga_bx.minimal F=micropython) ewen@parthenon:/src/fpga/litex-buildenv$

[mithro]

@ewenmcneill Can you send this to https://github.com/timvideos/TinyFPGA-Bootloader too? We can then update the LiteX-BuildEnv download-env.sh script to use the TimVideos fork...

[ewenmcneill]

I realise it's super cheeky to submit a pull request to merge your own code back into your own repo :-)

But as per https://discourse.tinyfpga.com/t/issues-with-tinyprog-u-on-bx/628/16 and #25 it's otherwise difficult for Python 3 users to install tinyprog 1.0.23 from several months ago....

Feel free to push your own local version up to GitHub, and close this pull request un-merged :-)

Ewen

[ewenmcneill]

@ewenmcneill Can you send this to https://github.com/timvideos/TinyFPGA-Bootloader too? We can then update the LiteX-BuildEnv download-env.sh script to use the TimVideos fork...

@mithro: see timvideos#1, which should be the same diff.

Ewen