GitLab-CI SafeSCARF 2.0

This repository provides a template for gitlab pipelines to integrate with SafeSCARF (based on DefectDojo).

• GitLab-CI SafeSCARF 2.0
  • Structure
    • gitlab-safescarf.yml
    • plugins
  • Usage
    • Scan Engines
      • DevSecOps Container Scanner By DTIT
      • DTSP Container Scan
        • Configuration
      • GitLab Container Scanner
      • GitLab Dependency Scanner
      • GitLab SAST Scanner
      • GitLab Secret Scanner
      • Helm Scanning
      • Xray Container Scan
        • Configuration
  • Variables
    • General
    • Engagement
    • Scan
  • Forking
  • Contributing

Please see Scan Engines to understand how to enable them and which are enabled by default.

Some templates, like the gitlab-container scanner are not directly plug and play and need some minor configurations.

You can still use the original variables to configure your jobs!

Structure

gitlab-safescarf.yml

The gitlab-safescarf.yml template provides the neccessary default variables and bundles the Safescarf-Connector to interact with the SafeSCARF api.

It also verifies that the mandatory variables have been set to prevent long pipeline debugging.

plugins

The scan jobs itself can be thought of a plugin. On the one hand they take care to actually scan the content and keep the result file and on the other hand, they extend the main template to interact with SafeSCARF and upload the result file with the correct metadata.

The plugins are located in Implementations

Usage

To use this integration, simply include the mandatory base template gitlab-safescarf.yml as a remote and include the desired plugins after:

include:
  - https://raw.githubusercontent.com/telekom-security/SafeSCARF-GitLab-Integration/<version>/gitlab-safescarf.yml

Make sure to use the github reference. We are publishing those templates on GitHub to allow you to pull those templates without any authentication from any cicd system.

Scan Engines

DevSecOps Container Scanner By DTIT

To enable this scanner, add the following template to your `include``:

include:
  - project: 'secureops/safescarf/safescarf-integration'
    ref: "master"
    file: 'implementations/devsecops-container.yml'

For further usage on how to use the scanner please check the scanner docs.

In case of the DSO Container Scanner you need to include it from gitlab via the project include syntax (see above) since it is not publicly available.

DTSP Container Scan

The Deutsche Telekom Scan Platform (DTSP) is the preferred way of T-Sec to scan container images. Internally grype is used. Besides, SBOMS are generated, mapped to the container digest and continously scanned to prevent new image scans.

To enable this Feature you have to include the template:

include:
  - https://raw.githubusercontent.com/telekom-security/SafeSCARF-GitLab-Integration/<version>/implementations/dtsp-container.yml

Configuration

GLOBAL Variables:

Variable	Mandatory	Default	Description
DTSP_API_KEY	Yes		API Token of DTSP (can be created in the user profile) - see FAQ for MCICD Source IPs
DTSP_URL	Yes	https://dtsp.telekom-dienste.de	URL of the used DTSP instance
DTSP_RESULT_FILE	Yes	dtsp-scanresults.json	default filename for the results file (normally, you should not change this)

JOB specific variables:

Variable	Mandatory	Default	Description
DTSP_REGISTRY_PW	No		Needed if the image is behind a registry authentication
DTSP_REGISTRY_TOKEN	No		Needed if the image is behind a registry authentication
DTSP_REGISTRY_USER	No	Needed if the image is behind a registry authentication
DTSP_IMAGE	Yes		The Image that should be scanned by DTSP (must include the registry path)

Further details about DTSP can be found within their docs

GitLab Container Scanner

To enable this scanner, add the following template to your `include``:

include:
  - https://raw.githubusercontent.com/telekom-security/SafeSCARF-GitLab-Integration/<version>/implementations/gitlab-container.yml

For further usage on how to use the scanner please check the scanner docs.

GitLab Dependency Scanner

To enable this scanner, add the following template to your `include``:

include:
  - https://raw.githubusercontent.com/telekom-security/SafeSCARF-GitLab-Integration/<version>/implementations/gitlab-dependency.yml

For further usage on how to use the scanner please check the scanner docs.

GitLab SAST Scanner

To enable this scanner, add the following template to your `include``:

include:
  - https://raw.githubusercontent.com/telekom-security/SafeSCARF-GitLab-Integration/<version>/implementations/gitlab-sast.yml

For further usage on how to use the scanner please check the scanner docs.

GitLab Secret Scanner

To enable this scanner, add the following template to your `include``:

include:
  - https://raw.githubusercontent.com/telekom-security/SafeSCARF-GitLab-Integration/<version>/implementations/gitlab-secrets.yml

For further usage on how to use the scanner please check the scanner docs.

Helm Scanning

To enable this template, add the following to your `include``:

include:
  - https://raw.githubusercontent.com/telekom-security/SafeSCARF-GitLab-Integration/<version>/implementations/gitlab-secrets.yml

This template consists of multiple test stages.

1. Trivy is doing an config scan of the helm charts.
2. The helm chart will be build and all related docker images will be extreacted
3. Grype will scan every detected container

For further usage on how to use / modify the template please check the knowledgebase.

Xray Container Scan

Jfrog Xray scans docker containers for any known vulnerabilites and posts the findings with metadata including remediation suggestions to SafeSCARF. For this to function, you need to include the variable XRAY_CONTAINER_IMAGE with the ID of your target Container Image (e.g nginx:1.0.0) in your .gitlab-ci.yml file. Additionally, add an ARTIFACTORY_TOKEN to your Settings -> CI/CD -> Variables. Generate this token by logging into Artifactory, clicking on Welcome, your email on the top-right -> Set Me Up -> docker -> Generate Token & Create Instructions.

include:
  - https://raw.githubusercontent.com/telekom-security/SafeSCARF-GitLab-Integration/<version>/implementations/xray-container.yml

Configuration

Variable	Mandatory	Default	Description
ARTIFACTORY_TOKEN	Yes	null	API token for Artifactory
XRAY_CONTAINER_IMAGE	Yes	""	ID of the Container Image

Variables

The variables have to be set in your gitlab-ci.yml file or in the GitLab CI/CD Settings.

General

Variable	Mandatory	Default	Description
SAFESCARF_URL	Yes	'https://safescarf.domain.tld/'	URL your your SafeSCARF Instance
SAFESCARF_TOKEN	Yes	null	API token for API-V2 Endpoint (machine or user token)
SAFESCARF_PRODUCT_ID	Yes	null	ID of your Product in SafeSCARF (will be displayed in the url bar of the browser after accessing the product)
SAFESCARF_REIMPORT_DO_NOT_REACTIVATE	No	True	see docs

Engagement

Variable	Mandatory	Default	Description
SAFESCARF_ENGAGEMENT_PERIOD	No	7	Duration in days of the created Engagement
SAFESCARF_ENGAGEMENT_STATUS	No	In Progress	Initial Status of the Engagement when created. Possible Values: Not Started, Blocked, Cancelled, Completed, In Progress, On Hold, Waiting for Resource
SAFESCARF_ENGAGEMENT_DEDUPLICATION_ON_ENGAGEMENT	No	true	If enabled deduplication will only mark a finding in this engagement as duplicate of another finding if both findings are in this engagement. If disabled, deduplication is on the product level.
SAFESCARF_ENGAGEMENT_BUILD_SERVER	No	null	ID of the Build Server if configured in SafeSCARF
SAFESCARF_ENGAGEMENT_SOURCE_CODE_MANAGEMENT_SERVER	No	null	ID of the SCM Server if configured in SafeSCARF
SAFESCARF_ENGAGEMENT_ORCHESTRATION_ENGINE	No	null	ID of the Orchestration Engine if configured in SafeSCARF
SAFESCARF_ENGAGEMENT_THREAT_MODEL	No	true
SAFESCARF_ENGAGEMENT_API_TEST	No	true
SAFESCARF_ENGAGEMENT_PEN_TEST	No	true
SAFESCARF_ENGAGEMENT_CHECK_LIST	No	true

Scan

Variable	Mandatory	Default	Description
SAFESCARF_SCAN_MINIMUM_SEVERITY	No	Info	Available values : Info, Low, Medium, High, Critical
SAFESCARF_SCAN_ACTIVE	No	true
SAFESCARF_SCAN_VERIFIED	No	true
SAFESCARF_SCAN_CLOSE_OLD_FINDINGS	No	true
SAFESCARF_SCAN_ENVIRONMENT	No	Default	Recommended to set!

Forking

Feel free to fork this repository and include into your own GitLab Instance. The only thing you have to take care of is to update the includes in "gitlab-safescarf.yml" in the repositories root directory.

Contributing

Feel free to fork this repository and add another scanner or to improve current implementations.

For new implementations, please follow the naming conventions: <product>-<scanner-type>.yml.

More Details can be found in our knowledgebase