MAX6675 Thermocouple Library

For Arduino boards.

The Library implements a set of methods for working with a thermocouple based on the MAX6675 driver. Provides a temperature reading in Celsius, Fahrenheit and Kelvin. Modified version of the MAX6675-library.

MAX6675 driver measures the output of a K Thermocouple and provides the result to the Arduino via a SPI interface.

Installation

1. Download the Latest release from gitHub.
2. Unzip and modify the Folder name to "MAX6675_Thermocouple" (Remove the '-version')
3. Paste the modified folder on your Library folder (On your libraries folder inside Sketchbooks or Arduino software).
4. Restart the Arduino IDE.

Circuit Diagram

SO: The module’s serial output. Your Arduino will read this output.

CS: Chip Select. Setting low, selects the Module and tells it to supply an output that is synchronize with a clock.

SCK: The Serial Clock, an input from your Arduino.

VCC: 5V supply

GND: Ground.

Methods

    // Instantiation:
    /**
        SCK_PIN - SCK digital port number.
        CS_PIN - CS digital port number.
        SO_PIN - SO digital port number.
    */
    MAX6675_Thermocouple thermocouple(SCK_PIN, CS_PIN, SO_PIN);

    // Read a temperature in Celsius.
    double celsius = thermocouple.readCelsius();
    // Read a temperature in Kelvin.
    double Kelvin = thermocouple.readKelvin();
    // Read a temperature in Fahrenheit.
    double fahrenheit = thermocouple.readFahrenheit();
    // For older devices.
    double farenheit = thermocouple.readFarenheit();

Examples

Serial Reading

Average Measurement

Smooth Measurement

All examples...

Created by Yurii Salimov.