chore: release 1.6.0 (#573) #82
Annotations
63 warnings
module has the same name as its containing module:
src/stats/pairhmm/mod.rs#L106
warning: module has the same name as its containing module
--> src/stats/pairhmm/mod.rs:106:1
|
106 | mod pairhmm;
| ^^^^^^^^^^^^
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#module_inception
= note: `#[warn(clippy::module_inception)]` on by default
|
casting to the same type is unnecessary (`u8` -> `u8`):
src/seq_analysis/orf.rs#L65
warning: casting to the same type is unnecessary (`u8` -> `u8`)
--> src/seq_analysis/orf.rs:65:44
|
65 | .map(|x| x.iter().map(|&x| x as u8).collect::<VecDeque<u8>>())
| ^^^^^^^ help: try: `x`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_cast
|
casting to the same type is unnecessary (`u8` -> `u8`):
src/seq_analysis/orf.rs#L61
warning: casting to the same type is unnecessary (`u8` -> `u8`)
--> src/seq_analysis/orf.rs:61:44
|
61 | .map(|x| x.iter().map(|&x| x as u8).collect::<VecDeque<u8>>())
| ^^^^^^^ help: try: `x`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_cast
|
casting to the same type is unnecessary (`i8` -> `i8`):
src/pattern_matching/myers/long.rs#L231
warning: casting to the same type is unnecessary (`i8` -> `i8`)
--> src/pattern_matching/myers/long.rs:231:28
|
231 | self.add_state(-carry as i8);
| ^^^^^^^^^^^^ help: try: `-carry`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_cast
|
the borrowed expression implements the required traits:
src/io/fasta.rs#L417
warning: the borrowed expression implements the required traits
--> src/io/fasta.rs:417:24
|
417 | fs::File::open(&path)
| ^^^^^ help: change this to: `path`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_borrows_for_generic_args
|
the borrowed expression implements the required traits:
src/io/fasta.rs#L374
warning: the borrowed expression implements the required traits
--> src/io/fasta.rs:374:24
|
374 | fs::File::open(&path)
| ^^^^^ help: change this to: `path`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_borrows_for_generic_args
|
the borrowed expression implements the required traits:
src/io/bed.rs#L115
warning: the borrowed expression implements the required traits
--> src/io/bed.rs:115:28
|
115 | .serialize(&(&record.chrom, record.start, record.end, &record.aux))
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: change this to: `(&record.chrom, record.start, record.end, &record.aux)`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_borrows_for_generic_args
|
the borrowed expression implements the required traits:
src/io/bed.rs#L112
warning: the borrowed expression implements the required traits
--> src/io/bed.rs:112:28
|
112 | .serialize(&(&record.chrom, record.start, record.end))
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: change this to: `(&record.chrom, record.start, record.end)`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_borrows_for_generic_args
= note: `#[warn(clippy::needless_borrows_for_generic_args)]` on by default
|
casting to the same type is unnecessary (`usize` -> `usize`):
src/data_structures/wavelet_matrix.rs#L137
warning: casting to the same type is unnecessary (`usize` -> `usize`)
--> src/data_structures/wavelet_matrix.rs:137:22
|
137 | let height = self.height as usize;
| ^^^^^^^^^^^^^^^^^^^^ help: try: `self.height`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_cast
|
implicitly performing saturating subtraction:
src/data_structures/rank_select.rs#L174
warning: implicitly performing saturating subtraction
--> src/data_structures/rank_select.rs:174:9
|
174 | / if superblock > 0 {
175 | | superblock -= 1;
176 | | }
| |_________^ help: try: `superblock = superblock.saturating_sub(1);`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#implicit_saturating_sub
= note: `#[warn(clippy::implicit_saturating_sub)]` on by default
|
casting to the same type is unnecessary (`usize` -> `usize`):
src/data_structures/qgram_index.rs#L100
warning: casting to the same type is unnecessary (`usize` -> `usize`)
--> src/data_structures/qgram_index.rs:100:28
|
100 | offset[qgram as usize] += 1;
| ^^^^^^^^^^^^^^ help: try: `qgram`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_cast
|
casting to the same type is unnecessary (`usize` -> `usize`):
src/data_structures/qgram_index.rs#L99
warning: casting to the same type is unnecessary (`usize` -> `usize`)
--> src/data_structures/qgram_index.rs:99:36
|
99 | pos[a + offset[qgram as usize]] = i;
| ^^^^^^^^^^^^^^ help: try: `qgram`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_cast
|
casting to the same type is unnecessary (`usize` -> `usize`):
src/data_structures/qgram_index.rs#L97
warning: casting to the same type is unnecessary (`usize` -> `usize`)
--> src/data_structures/qgram_index.rs:97:28
|
97 | if address[qgram as usize + 1] - a != 0 {
| ^^^^^^^^^^^^^^ help: try: `qgram`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_cast
|
casting to the same type is unnecessary (`usize` -> `usize`):
src/data_structures/qgram_index.rs#L96
warning: casting to the same type is unnecessary (`usize` -> `usize`)
--> src/data_structures/qgram_index.rs:96:33
|
96 | let a = address[qgram as usize];
| ^^^^^^^^^^^^^^ help: try: `qgram`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_cast
|
casting to the same type is unnecessary (`u32` -> `u32`):
src/data_structures/qgram_index.rs#L74
warning: casting to the same type is unnecessary (`u32` -> `u32`)
--> src/data_structures/qgram_index.rs:74:46
|
74 | let qgram_count = alphabet.len().pow(q as u32);
| ^^^^^^^^ help: try: `q`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_cast
|
casting to the same type is unnecessary (`usize` -> `usize`):
src/data_structures/interval_tree/array_backed_interval_tree.rs#L202
warning: casting to the same type is unnecessary (`usize` -> `usize`)
--> src/data_structures/interval_tree/array_backed_interval_tree.rs:202:17
|
202 | let n = self.entries.len() as usize;
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `self.entries.len()`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_cast
|
unsafe function's docs miss `# Safety` section:
src/data_structures/fmindex.rs#L561
warning: unsafe function's docs miss `# Safety` section
--> src/data_structures/fmindex.rs:561:5
|
561 | / pub unsafe fn from_fmindex_unchecked(
562 | | fmindex: FMIndex<DBWT, DLess, DOcc>,
563 | | ) -> FMDIndex<DBWT, DLess, DOcc> {
| |____________________________________^
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#missing_safety_doc
= note: `#[warn(clippy::missing_safety_doc)]` on by default
|
casting to the same type is unnecessary (`usize` -> `usize`):
src/data_structures/bwt.rs#L181
warning: casting to the same type is unnecessary (`usize` -> `usize`)
--> src/data_structures/bwt.rs:181:9
|
181 | bytecount::count(&bwt[lo_idx + 1..=r], a) as usize + lo_occ
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `bytecount::count(&bwt[lo_idx + 1..=r], a)`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_cast
|
casting to the same type is unnecessary (`usize` -> `usize`):
src/data_structures/bwt.rs#L174
warning: casting to the same type is unnecessary (`usize` -> `usize`)
--> src/data_structures/bwt.rs:174:37
|
174 | return hi_occ - bytecount::count(&bwt[r + 1..=hi_idx], a) as usize;
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `bytecount::count(&bwt[r + 1..=hi_idx], a)`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_cast
|
use of `or_insert_with` to construct default value:
src/data_structures/annot_map.rs#L176
warning: use of `or_insert_with` to construct default value
--> src/data_structures/annot_map.rs:176:14
|
176 | .or_insert_with(IntervalTree::new);
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `or_default()`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unwrap_or_default
|
use of `or_insert_with` to construct default value:
src/data_structures/annot_map.rs#L112
warning: use of `or_insert_with` to construct default value
--> src/data_structures/annot_map.rs:112:14
|
112 | .or_insert_with(IntervalTree::new);
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `or_default()`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unwrap_or_default
|
casting to the same type is unnecessary (`u32` -> `u32`):
src/alignment/sparse.rs#L455
warning: casting to the same type is unnecessary (`u32` -> `u32`)
--> src/alignment/sparse.rs:455:23
|
455 | let max_inc = (min(
| _______________________^
456 | | seq1.len() as u32 - this_match.0,
457 | | seq2.len() as u32 - this_match.1,
458 | | ) as u32)
| |_________________^
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_cast
help: try
|
455 ~ let max_inc = min(
456 + seq1.len() as u32 - this_match.0,
457 + seq2.len() as u32 - this_match.1,
458 + )
|
|
use of `or_insert_with` to construct default value:
src/alignment/sparse.rs#L347
warning: use of `or_insert_with` to construct default value
--> src/alignment/sparse.rs:347:14
|
347 | .or_insert_with(Vec::new)
| ^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `or_default()`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unwrap_or_default
= note: `#[warn(clippy::unwrap_or_default)]` on by default
|
using `clone` on type `TracebackCell` which implements the `Copy` trait:
src/alignment/poa.rs#L704
warning: using `clone` on type `TracebackCell` which implements the `Copy` trait
--> src/alignment/poa.rs:704:13
|
704 | traceback.get(traceback.last.index() + 1, n).clone(),
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try dereferencing it: `*traceback.get(traceback.last.index() + 1, n)`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#clone_on_copy
|
using `clone` on type `TracebackCell` which implements the `Copy` trait:
src/alignment/poa.rs#L690
warning: using `clone` on type `TracebackCell` which implements the `Copy` trait
--> src/alignment/poa.rs:690:17
|
690 | traceback.get(traceback.last.index() + 1, j).clone(),
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try dereferencing it: `*traceback.get(traceback.last.index() + 1, j)`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#clone_on_copy
|
the loop variable `j` is used to index `max_in_column`:
src/alignment/poa.rs#L684
warning: the loop variable `j` is used to index `max_in_column`
--> src/alignment/poa.rs:684:18
|
684 | for j in 0..n + 1 {
| ^^^^^^^^
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_range_loop
help: consider using an iterator and enumerate()
|
684 | for (j, <item>) in max_in_column.iter().enumerate().take(n + 1) {
| ~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
using `clone` on type `i32` which implements the `Copy` trait:
src/alignment/poa.rs#L531
warning: using `clone` on type `i32` which implements the `Copy` trait
--> src/alignment/poa.rs:531:31
|
531 | weight += edge.weight().clone();
| ^^^^^^^^^^^^^^^^^^^^^ help: try dereferencing it: `*edge.weight()`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#clone_on_copy
|
this loop could be written as a `for` loop:
src/alignment/poa.rs#L530
warning: this loop could be written as a `for` loop
--> src/alignment/poa.rs:530:17
|
530 | while let Some(edge) = edges.next() {
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `for edge in edges`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#while_let_on_iterator
|
this loop could be written as a `for` loop:
src/alignment/poa.rs#L525
warning: this loop could be written as a `for` loop
--> src/alignment/poa.rs:525:13
|
525 | while let Some(neighbour_node) = neighbour_nodes.next() {
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `for neighbour_node in neighbour_nodes`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#while_let_on_iterator
= note: `#[warn(clippy::while_let_on_iterator)]` on by default
|
using `clone` on type `AlignmentOperation` which implements the `Copy` trait:
src/alignment/poa.rs#L338
warning: using `clone` on type `AlignmentOperation` which implements the `Copy` trait
--> src/alignment/poa.rs:338:22
|
338 | ops.push(self.get(i, j).op.clone());
| ^^^^^^^^^^^^^^^^^^^^^^^^^ help: try removing the `clone` call: `self.get(i, j).op`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#clone_on_copy
= note: `#[warn(clippy::clone_on_copy)]` on by default
|
length comparison to zero:
src/alignment/poa.rs#L300
warning: length comparison to zero
--> src/alignment/poa.rs:300:65
|
300 | if !(self.matrix[i].1 > j || self.matrix[i].2 <= j) && (self.matrix[i].0.len() > 0) {
| ^^^^^^^^^^^^^^^^^^^^^^^^^^ help: using `!is_empty` is clearer and more explicit: `!self.matrix[i].0.is_empty()`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#len_zero
= note: `#[warn(clippy::len_zero)]` on by default
|
unneeded `return` statement:
src/alignment/poa.rs#L302
warning: unneeded `return` statement
--> src/alignment/poa.rs:302:13
|
302 | return &self.matrix[i].0[real_position];
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_return
= note: `#[warn(clippy::needless_return)]` on by default
help: remove `return`
|
302 - return &self.matrix[i].0[real_position];
302 + &self.matrix[i].0[real_position]
|
|
the loop variable `current_seq` is only used to index `seq_pretty`:
src/alignment/poa.rs#L135
warning: the loop variable `current_seq` is only used to index `seq_pretty`
--> src/alignment/poa.rs:135:36
|
135 | for current_seq in 0..sequences.len() {
| ^^^^^^^^^^^^^^^^^^
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_range_loop
= note: `#[warn(clippy::needless_range_loop)]` on by default
help: consider using an iterator
|
135 | for <item> in seq_pretty.iter_mut().take(sequences.len()) {
| ~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
casting a character literal to `u8` truncates:
src/alignment/poa.rs#L132
warning: casting a character literal to `u8` truncates
--> src/alignment/poa.rs:132:33
|
132 | con_pretty.push('-' as u8);
| ^^^^^^^^^ help: use a byte literal instead: `b'-'`
|
= note: `char` is four bytes wide, but `u8` is a single byte
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#char_lit_as_u8
|
casting a character literal to `u8` truncates:
src/alignment/poa.rs#L126
warning: casting a character literal to `u8` truncates
--> src/alignment/poa.rs:126:33
|
126 | con_pretty.push('-' as u8);
| ^^^^^^^^^ help: use a byte literal instead: `b'-'`
|
= note: `char` is four bytes wide, but `u8` is a single byte
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#char_lit_as_u8
|
casting a character literal to `u8` truncates:
src/alignment/poa.rs#L121
warning: casting a character literal to `u8` truncates
--> src/alignment/poa.rs:121:50
|
121 | seq_pretty[current_seq].push('-' as u8);
| ^^^^^^^^^ help: use a byte literal instead: `b'-'`
|
= note: `char` is four bytes wide, but `u8` is a single byte
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#char_lit_as_u8
|
casting a character literal to `u8` truncates:
src/alignment/poa.rs#L115
warning: casting a character literal to `u8` truncates
--> src/alignment/poa.rs:115:50
|
115 | seq_pretty[current_seq].push('-' as u8);
| ^^^^^^^^^ help: use a byte literal instead: `b'-'`
|
= note: `char` is four bytes wide, but `u8` is a single byte
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#char_lit_as_u8
= note: `#[warn(clippy::char_lit_as_u8)]` on by default
|
casting to the same type is unnecessary (`u32` -> `u32`):
src/alignment/pairwise/banded.rs#L1265
warning: casting to the same type is unnecessary (`u32` -> `u32`)
--> src/alignment/pairwise/banded.rs:1265:70
|
1265 | self.add_gap((r as u32, c as u32), (rows as u32, cols as u32), w);
| ^^^^^^^^^^^ help: try: `cols`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_cast
|
casting to the same type is unnecessary (`u32` -> `u32`):
src/alignment/pairwise/banded.rs#L1265
warning: casting to the same type is unnecessary (`u32` -> `u32`)
--> src/alignment/pairwise/banded.rs:1265:57
|
1265 | self.add_gap((r as u32, c as u32), (rows as u32, cols as u32), w);
| ^^^^^^^^^^^ help: try: `rows`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_cast
= note: `#[warn(clippy::unnecessary_cast)]` on by default
|
manual implementation of `Option::map`:
src/alignment/distance.rs#L166
warning: manual implementation of `Option::map`
--> src/alignment/distance.rs:166:9
|
166 | / if let Some(x) = editdistancek::edit_distance_bounded(
167 | | alpha,
168 | | beta,
169 | | min(k as usize, max(alpha.len(), beta.len())),
... |
173 | | None
174 | | }
| |_________^
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#manual_map
= note: `#[warn(clippy::manual_map)]` on by default
help: try
|
166 ~ editdistancek::edit_distance_bounded(
167 + alpha,
168 + beta,
169 + min(k as usize, max(alpha.len(), beta.len())),
170 + ).map(|x| x as u32)
|
|
unused import: `XYEmission`:
src/stats/pairhmm/pairhmm.rs#L20
warning: unused import: `XYEmission`
--> src/stats/pairhmm/pairhmm.rs:20:63
|
20 | EmissionParameters, GapParameters, StartEndGapParameters, XYEmission,
| ^^^^^^^^^^
|
= note: `#[warn(unused_imports)]` on by default
|
'test' may be misspelled as 'tests':
src/data_structures/smallints.rs#L198
warning: 'test' may be misspelled as 'tests'
--> src/data_structures/smallints.rs:198:7
|
198 | #[cfg(tests)]
| ^^^^^ help: did you mean: `test`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#maybe_misused_cfg
= note: `#[warn(clippy::maybe_misused_cfg)]` on by default
|
release-please
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: GoogleCloudPlatform/release-please-action@v2, actions/checkout@v2, actions-rs/toolchain@v1, Swatinem/rust-cache@v1.3.0, actions-rs/cargo@v1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
release-please
The following actions uses node12 which is deprecated and will be forced to run on node16: GoogleCloudPlatform/release-please-action@v2, actions/checkout@v2, actions-rs/toolchain@v1, Swatinem/rust-cache@v1.3.0, actions-rs/cargo@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
release-please:
src/stats/pairhmm/pairhmm.rs#L20
unused import: `XYEmission`
|
release-please
`bio` (lib) generated 1 warning (run `cargo fix --lib -p bio` to apply 1 suggestion)
|
release-please
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
release-please
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
release-please
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
release-please
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
release-please
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
release-please
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
release-please
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
release-please
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
release-please
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
release-please
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
release-please
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
release-please
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
release-please
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
release-please
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
release-please
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
release-please
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
release-please
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|