zeth

Zeth is an open-source ZK block prover for Ethereum and Optimism built on the RISC Zero zkVM.

Zeth makes it possible to prove that a given block is valid (i.e., is the result of applying the given list of transactions to the parent block) without relying on the validator or sync committees. This is because Zeth does all the work needed to construct a new block from within the zkVM, including:

Verifying transaction signatures.
Verifying account & storage state against the parent block’s state root.
Applying transactions.
Paying the block reward.
Updating the state root.
Etc.

After constructing the new block, Zeth calculates and outputs the block hash. By running this process within the zkVM, we obtain a ZK proof that the new block is valid. For Optimism, our validity proof ensures that the block is correctly derived from the available data posted to Ethereum.

Status

Zeth is experimental and may still contain bugs.

Usage

Prerequisites

Zeth primarily requires the availability of Ethereum/Optimism RPC provider(s) data. Two complementary types of providers are supported:

RPC provider. This fetches data from a Web2 RPC provider, such as Alchemy. Specified using the --eth-rpc-url=<RPC_URL> and --op-rpc-url=<RPC_URL> parameters.
Cached RPC provider. This fetches RPC data from a local file when possible, and falls back to a Web2 RPC provider when necessary. It amends the local file with results from the Web2 provider so that subsequent runs don't require additional Web2 RPC calls. Specified using the --cache[=<CACHE>] parameter.

Installation

RISC Zero zkVM

Install the cargo risczero tool and the risc0 toolchain:

cargo install cargo-risczero
cargo risczero install

zeth

Clone the repository and build with cargo using one of the following commands:

CPU Proving (slow):

cargo build --release

GPU Proving (apple/metal)

cargo build -F metal --release

GPU Proving (nvidia/cuda)

cargo build -F cuda --release

docker (recommended)

If you wish to use the --release profile when building Zeth, check out https://docs.docker.com/engine/install/ for a guide on how to install docker, which is required for reproducible builds of the zkVM binaries in Zeth.

Execution:

Run the built binary (instead of using cargo run) using:

RUST_LOG=info ./target/release/zeth

CLI

Zeth currently has four main modes of execution:

RUST_LOG=info ./target/release/zeth help

Usage: zeth <COMMAND>

Commands:
  build    Build blocks natively outside the zkVM
  run      Run the block creation process inside the executor
  prove    Provably create blocks inside the zkVM
  verify   Verify a block creation receipt
  op-info  Output debug information about an optimism block
  help     Print this message or the help of the given subcommand(s)

Options:
  -h, --help     Print help
  -V, --version  Print version

For every command, the --network parameter can be set to either ethereum or optimism for provable construction of single blocks from either chain on its own. To provably derive Optimism blocks using the data posted on the Ethereum chain, use --network=optimism-derived, but optimism-derived is not supported by the run and op-info commands.

build

This command only natively builds blocks and does not generate any proofs.

RUST_LOG=info ./target/release/zeth build --help

Build blocks natively outside the zkVM

Usage: zeth build [OPTIONS] --block-number=<BLOCK_NUMBER>

Options:
  -w, --network=<NETWORK>            Network name (ethereum/optimism/optimism-derived) [default: ethereum]
  -e, --eth-rpc-url=<ETH_RPC_URL>    URL of the Ethereum RPC node
  -o, --op-rpc-url=<OP_RPC_URL>      URL of the Optimism RPC node
  -c, --cache[=<CACHE>]              Use a local directory as a cache for RPC calls. Accepts a custom directory. [default: cache_rpc]
  -b, --block-number=<BLOCK_NUMBER>  Block number to begin from
  -n, --block-count=<BLOCK_COUNT>    Number of blocks to provably derive [default: 1]
  -m, --composition[=<COMPOSITION>]  Compose separate block derivation proofs together. Accepts a custom number of blocks to process per derivation call. (optimism-derived network only) [default: 1]
  -h, --help                         Print help

When run in this mode, Zeth does all the work needed to construct an Ethereum block and verifies the correctness of the result using the RPC provider. No proofs are generated.

With --network=optimism-derived, the derivation proof creation is done without proof composition by default, requiring the derivation to be carried out inside a single zkVM execution.

Examples The host/testdata and host/testdata/derivation directories come preloaded with a few cache files that you can use out of the box without the need to explicitly specify an RPC URL:

RUST_LOG=info ./target/release/zeth build \
  --network=ethereum \
  --cache=host/testdata \
  --block-number=16424130

RUST_LOG=info ./target/release/zeth build \
  --network=optimism \
  --cache=host/testdata \
  --block-number=107728767

RUST_LOG=info ./target/release/zeth build \
  --network=optimism-derived \
  --cache=host/testdata/derivation \
  --block-number=109279674 \
  --block-count=4

Composition The optimism derivation proof (--network=optimism-derived) can alternatively be created using proof composition by setting the --composition parameter to the number of op blocks per rolled up proof. In the following example, 2 derivation proofs of 2 sequential blocks each are composed to obtain the final derivation proof for the 4 sequential blocks:

RUST_LOG=info ./target/release/zeth build \
  --network=optimism-derived \
  --cache=host/testdata/derivation \
  --block-number=109279674 \
  --block-count=4 \
  --composition=2

run

This command only invokes the RISC-V emulator and does not generate any proofs.

RUST_LOG=info ./target/release/zeth run --help

Run the block creation process inside the executor

Usage: zeth run [OPTIONS] --block-number=<BLOCK_NUMBER>

Options:
  -w, --network=<NETWORK>            Network name (ethereum/optimism/optimism-derived) [default: ethereum]
  -e, --eth-rpc-url=<ETH_RPC_URL>    URL of the Ethereum RPC node
  -o, --op-rpc-url=<OP_RPC_URL>      URL of the Optimism RPC node
  -c, --cache[=<CACHE>]              Use a local directory as a cache for RPC calls. Accepts a custom directory. [default: cache_rpc]
  -b, --block-number=<BLOCK_NUMBER>  Block number to begin from
  -n, --block-count=<BLOCK_COUNT>    Number of blocks to provably derive [default: 1]
  -x, --execution-po2=<LOCAL_EXEC>      The maximum segment cycle count as a power of 2 [default: 20]
  -p, --profile                      Whether to profile the zkVM execution
  -h, --help                         Print help

Local executor mode. When run in this mode, Zeth does all the work needed to construct an Ethereum block from within the zkVM's non-proving emulator. Correctness of the result is checked using the RPC provider. This is useful for measuring the size of the computation (number of execution segments and cycles). No proofs are generated.

Examples The below examples will invoke the executor, which will take a bit more time, and output the number of cycles required for execution/proving inside the zkVM:

RUST_LOG=info ./target/release/zeth run \
  --cache=host/testdata \
  --network=ethereum \
  --block-number=16424130

RUST_LOG=info ./target/release/zeth run \
  --cache=host/testdata \
  --network=optimism \
  --block-number=107728767

The run command does not support proof composition (required by --network=optimism-derived) because receipts are required for this process inside the executor. Alternatively, one can call the prove command in dev mode (RISC0_DEV_MODE=true) for the same functionality, as demonstrated in the next section.

prove

This command generates a ZK proof, unless dev mode is enabled through the environment variable RISC0_DEV_MODE=true.

RUST_LOG=info ./target/release/zeth prove --help

Provably create blocks inside the zkVM

Usage: zeth prove [OPTIONS] --block-number=<BLOCK_NUMBER>

Options:
  -w, --network=<NETWORK>            Network name (ethereum/optimism/optimism-derived) [default: ethereum]
  -e, --eth-rpc-url=<ETH_RPC_URL>    URL of the Ethereum RPC node
  -o, --op-rpc-url=<OP_RPC_URL>      URL of the Optimism RPC node
  -c, --cache[=<CACHE>]              Use a local directory as a cache for RPC calls. Accepts a custom directory. [default: cache_rpc]
  -b, --block-number=<BLOCK_NUMBER>  Block number to begin from
  -n, --block-count=<BLOCK_COUNT>    Number of blocks to provably derive [default: 1]
  -x, --execution-po2=<LOCAL_EXEC>      The maximum segment cycle count as a power of 2 [default: 20]
  -p, --profile                      Whether to profile the zkVM execution
  -m, --composition[=<COMPOSITION>]  Compose separate block derivation proofs together. Accepts a custom number of blocks to process per derivation call. (optimism-derived network only) [default: 1]
  -s, --submit-to-bonsai             Prove remotely using Bonsai
  -h, --help                         Print help

Proving on Bonsai. To run in this mode, add the parameter --submit-to-bonsai. When run in this mode, Zeth submits a proving task to the Bonsai proving service, which then constructs the blocks entirely from within the zkVM. This mode checks the correctness of the result on your machine using the RPC provider(s). It also outputs the Bonsai session UUID, and polls Bonsai until the proof is complete.

To use this feature, first set the BONSAI_API_URL and BONSAI_API_KEY environment variables before executing zeth to submit jobs to Bonsai.

Need a Bonsai API key? Sign up today.

Examples The below examples will invoke the prover, which will take a potentially significant time to generate a ZK proof locally:

RUST_LOG=info ./target/release/zeth prove \
  --cache=host/testdata \
  --network=ethereum \
  --block-number=16424130

RUST_LOG=info ./target/release/zeth prove \
  --cache=host/testdata \
  --network=optimism \
  --block-number=107728767

RUST_LOG=info ./target/release/zeth prove \
  --network=optimism-derived \
  --cache=host/testdata/derivation \
  --block-number=109279674 \
  --block-count=4

Composition Alternatively, we can run composition in dev mode, which should only as much time as required by the executor, using the following command:

RISC0_DEV_MODE=true RUST_LOG=info ./target/release/zeth prove \
  --network=optimism-derived \
  --cache=host/testdata/derivation \
  --block-number=109279674 \
  --block-count=4 \
  --composition=2

NOTE Proving in dev mode only generates dummy receipts that do not attest to the validity of the computation and are not verifiable outside of dev mode!

verify

This command verifies a ZK proof generated on Bonsai.

RUST_LOG=info ./target/release/zeth verify --help

Verify a block creation receipt

Usage: zeth verify [OPTIONS] --block-number=<BLOCK_NUMBER> --bonsai-receipt-uuid=<BONSAI_RECEIPT_UUID>

Options:
  -w, --network=<NETWORK>
          Network name (ethereum/optimism/optimism-derived) [default: ethereum]
  -e, --eth-rpc-url=<ETH_RPC_URL>
          URL of the Ethereum RPC node
  -o, --op-rpc-url=<OP_RPC_URL>
          URL of the Optimism RPC node
  -c, --cache[=<CACHE>]
          Use a local directory as a cache for RPC calls. Accepts a custom directory. [default: cache_rpc]
  -b, --block-number=<BLOCK_NUMBER>
          Block number to begin from
  -n, --block-count=<BLOCK_COUNT>
          Number of blocks to provably derive [default: 1]
  -b, --bonsai-receipt-uuid=<BONSAI_RECEIPT_UUID>
          Verify the receipt from the provided Bonsai Session UUID
  -h, --help
          Print help

This command first natively builds the specified block(s), and then validates the correctness of the receipt generated on Bonsai specified by the --bonsai-receipt-uuid=BONSAI_SESSION_UUID parameter, where BONSAI_SESSION_UUID is the session UUID returned when proving using --submit-to-bonsai.

op-info

RUST_LOG=info ./target/release/zeth op-info --help

Output debug information about an optimism block

Usage: zeth op-info [OPTIONS] --block-number=<BLOCK_NUMBER>

Options:
  -w, --network=<NETWORK>            Network name (ethereum/optimism/optimism-derived) [default: ethereum]
  -e, --eth-rpc-url=<ETH_RPC_URL>    URL of the Ethereum RPC node
  -o, --op-rpc-url=<OP_RPC_URL>      URL of the Optimism RPC node
  -c, --cache[=<CACHE>]              Use a local directory as a cache for RPC calls. Accepts a custom directory. [default: cache_rpc]
  -b, --block-number=<BLOCK_NUMBER>  Block number to begin from
  -n, --block-count=<BLOCK_COUNT>    Number of blocks to provably derive [default: 1]
  -h, --help                         Print help

This command only outputs debug information for development use.

Additional resources

Check out these resources and say hi on our Discord:

Name		Name	Last commit message	Last commit date
Latest commit History 60 Commits
.cargo		.cargo
.github/workflows		.github/workflows
.vscode		.vscode
guests		guests
host		host
lib		lib
primitives		primitives
testing/ef-tests		testing/ef-tests
.gitignore		.gitignore
.gitmodules		.gitmodules
Cargo.lock		Cargo.lock
Cargo.toml		Cargo.toml
LICENSE		LICENSE
README.md		README.md
config.toml		config.toml
rust-toolchain		rust-toolchain
rustfmt.toml		rustfmt.toml

License

risc0/zeth

Folders and files

Latest commit

History

Repository files navigation

zeth

Status

Usage

Prerequisites

Installation

RISC Zero zkVM

zeth

docker (recommended)

Execution:

CLI

build

run

prove

verify

op-info

Additional resources

About

Resources

License

Stars

Watchers

Forks

Languages