Skip to content

ramitsurana/ansible-ec2-docker-deployment

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

39 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Ansible-ec2-docker-deployment

Using Ansible to setup Wordpress, MariaDB & ELK Stack to an AWS EC2 instance with Docker Compose

Prerequisites

  • Pythonv2.7
  • Ansible
  • Python Boto
  • Git

( For Manual Installation - https://github.com/ramitsurana/ansible-ec2-docker-deployment/blob/master/Installation.md)

Design

arch

The design of the model is to deploy the ELK stack,Wordpress and Redis on top of the docker in an EC2 instance.This is done using docker compose and dockerfiles.The provisioning of the system is done using ansible.The base os is Ubuntu 14.04.For successful results,please avoid Ubuntu 16.04 as it does not contain pre-installed python. For the same, you can use:

$ sudo apt-get install python-minimal -y

Ref

The file structure is as follows:

  • Docker

    • app
      • app1
        • docker-compose.app.yml
      • app-deploy.yml
    • elk
      • elk1
        • docker-compose.yml
      • elk-deploy.yml
  • Deploy

    • ec2-configure.yml
  • Ansible

    • Info
      • aws-credentials.yml
      • specs.yml
    • provision.yml
    • vpc-provision.yml
    • hosts

Steps:

$ git clone https://github.com/ramitsurana/ansible-ec2-docker-deployment/
$ cd ansible-ec2-docker-deployment/

Configuring Hosts

Please create and add the following lines at /etc/ansible/hosts file :

[local]
127.0.0.1

[ec2]
<EC2-IP> ansible_user=ubuntu

You can choose the EC2 IP by choosing an elastic Ip for your instance.This is good way to fix an IP as it may change after a reboot of EC2 instance. This setting can be observed at EC2 Dashboard > Elastic IP.

Similarly you should also create another file at /etc/ansible/ansible.cfg.This is the main configuration file for ansible to run.You can uncomment add some sections in it as represented below:

[defaults]

# some basic default values...

inventory      = /etc/ansible/hosts
library        = /usr/share/my_modules/
remote_tmp     = $HOME/.ansible/tmp
local_tmp      = $HOME/.ansible/tmp
forks          = 5
poll_interval  = 15
sudo_user      = root
#ask_sudo_pass = True
#ask_pass      = True
#transport      = smart
remote_port    = 22
#module_lang    = C
#module_set_locale = True

Creating VPC

This can be done using the vpc-provision.yml file present in the ansible dir.It requires you to put your aws credentials here.The specs.yml file is already configured. The command to run the ansible playbook is as follows:

$ sudo ansible-playbook vpc-provision.yml -i hosts -vv

Creating EC2

This can be done using the provision.yml file present in the ansible dir.It requires you to put your aws credentials here.The specs.yml file stated the region,ami and instance type.The command to run the ansible playbook is as follows:

$ sudo ansible-playbook provision.yml -i hosts -vv

Remember to associate your Elastic IP with the EC2 instance.This can be observed under Elastic IP > Associate.

Configuring EC2

We can start configuring our EC2 instance by running some basic commands such as:

//Installing Docker
$ sudo apt-get clean && update -y
$ apt-get install apt-transport-https ca-certificates curl software-properties-common -y
$ apt-get install curl -y
$ sudo apt-get install docker.io -y
$ sudo usermod -aG docker ${USER}
$ sudo service docker restart

//Installing docker compose
$ sudo sudo apt-get install python-pip python-dev build-essential -y
$ sudo pip install docker-compose==1.3.0

This can be done using the ec2-configure.yml file present in the repo.The command would be:

$ sudo ansible-playbook ec2-configure.yml -vv --private-key  <path-to-keypair>

Deploying ELK Stack using Docker Compose

It can be done using the ansible playbook.

$ sudo ansible-playbook elk-deploy.yml -vv --private-key <keypair>

The playbook consists of the below commands:

$ cp elk1/docker-compose.yml ~/home/ubuntu/
$ sudo docker-compose -f ~/home/ubuntu/docker-compose.yml up -d
$ sudo rm -f ~/home/ubuntu/docker-compose.yml 

Deploying Wordpress and Mariadb Containers using Docker Compose

It can be done using the ansible playbook.

$ sudo ansible-playbook app-deploy.yml -vv --private-key <keypair>

The playbook consists of the following below commands:

$ cp app1/docker-compose.yml ~/home/ubuntu/
$ sudo docker-compose -f ~/home/ubuntu/docker-compose.app.yml up -d
$ sudo rm -f ~/home/ubuntu/docker-compose.app.yml 

Output

Add tag Owner : in EC2 instance.

The output can be observed using the ip address of the ec2 instance.The Public DNS would be like ec2-xxx-xxx-xxx.compute.amazonaws.com.

Service Port
Wordpress 8080
Kibana 5601

Please check the inbound and outbound rules in case of any page loading and reloading errors.You can check it out at EC2 Dashboard > Security Groups.

Sample video output can be found out here :

IMAGE ALT TEXT HERE

License

MIT License

Releases

No releases published

Packages

No packages published