Nuget Package for thread-safe communication between Raspberry Pi & Arduino in Windows 10 IoT Core UWPs

Install Package using Package Manager

Install-Package RpiUno -Version 1.0.0

Intall Package using .NET-Cli

dotnet add package RpiUno --version 1.0.0

The Package currently supports communication over I2C bus.

Include using RpiUno; where you need to use the package.

Modes

The package classifies Arduino operations into three modes:

1. RecieveSensorData: Sends a byte '0' to arduino to indicate operation to receive sensor data.
2. RecieveDeviceState: Sends a byte '1' to arduino to indicate operation to receive a Pin's state
3. SendIOSignal: Sends a byte '2' to arduino to indicate operation to turn a pin HIGH or LOW

Read-Write to Arduino

Make an asynchronus call to ReadWriteAsync() method to perform a read or write operation on Arduino.

Turn a pin High / Low

await UnoI2C.ReadWriteAsync("Mention slave address (int)", Mode.SendIOSignal, (Pin Number as byte), PinValue.High);

Read Sensor Data

await UnoI2C.ReadWriteAsync(Mention slave address (int), Mode.RecieveSensorData, (Sensor Pin Number as byte));

Read Pin State

await UnoI2C.ReadWriteAsync(Mention slave address (int), Mode.RecieveDeviceState, (Sensor Pin Number as byte));