Skip to content

CircuitPython code to create sound reactive Neopixels on a rp2040 Feather and Neopixel Featherwing embedded in a 3D printed Audioengine P4 / A5 speaker stand.

License

Notifications You must be signed in to change notification settings

prcutler/speakerstand-lights

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

88 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Project Type: Toy Open in Visual Studio Code

Sound Reactive NeoPixel FeatherWing

The speakerstand-lights project is written in CircuitPython and uses a NeoPixel FeatherWing, an Adafruit Feather rp2040 Pico, and a digital microphone breakout board. I used an I2S mic and any digital mic will work, but not analog. Together, they create a sound reactive spectrogram displayed on the NeoPixel FeatherWing's pixels.

You will need to know the basics of soldering to stack the Feathers and to attach the microphone.

Learn more at the project homepage.

Part 1: CircuitPython Code

Thank you to Adafruit, including Kattni Rembor and Philip Burgess, for the Adafruit EyeLights LED Glasses Music-Reactive Lights project. Better yet, it's released under a MIT license making it easy to modify. Using this code, I only had to change a few lines to make it work with the NeoPixel FeatherWing!

To use with the Feather rp2040 Pico and a FeatherWing NeoPixel, the code needed to be updated to remove the LED_Glasses module and replaced with PixelFramebuffer from the adafruit_pixel_framebuf module.

Additionally, I reduced the spectrum the microphone listens for as the NeoPixel FeatherWing has less pixels (8x4) than the original code's 13x9 LED matrix.

I commented out the original code and included the original spectrum variables in the comments. You can play with the variables to find the visualizer you want.

Video never captures LEDs right, but here is an animated gif:

Audio Reactive NeoPixels

Part Two - 3D Printing a new speaker stand

I will be installing the NeoPixel FeatherWing in an AudioEngine P4 speaker stand which I will be 3D printing (and will add the CAD and STL files to the repository when complete). This will include a cutout for the NeoPixel FeatherWing on the front and the USB power cable on the back.

Original speaker stands for the P4 / H4 from AudioEngine:

Original speaker stands for the P4 / H4 from AudioEngine:

Thank You and Credits

Thanks again to Adafruit, including Kattni Rembor and Philip Burgess, for the Adafruit EyeLights LED Glasses Music-Reactive Lights - I only had to change a few lines of code to make this work with a NeoPixel Feather!

I spent hours tearing apart and putting back together the audio code, spectrograms, and more from these Adafruit projects, also open source:

About

CircuitPython code to create sound reactive Neopixels on a rp2040 Feather and Neopixel Featherwing embedded in a 3D printed Audioengine P4 / A5 speaker stand.

Topics

Resources

License

Code of conduct

Stars

Watchers

Forks

Packages

No packages published

Languages