Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Compatibility list #4

Open
pdulvp opened this issue Jan 16, 2022 · 57 comments
Open

Compatibility list #4

pdulvp opened this issue Jan 16, 2022 · 57 comments

Comments

@pdulvp
Copy link
Owner

pdulvp commented Jan 16, 2022 •
edited

Compatible
Probably only x64 versions.
👍 TS-253A (intel) (fw 4.5.4.1723)
👍 TS-251+ (intel)
🍂 arm64 QNAP ?
🍂 armrf QNAP ?

Not compatible
🌵 All others ?
@ZeVince
Copy link

ZeVince commented Jan 24, 2022

So far so good on TS-453D (Intel Celeron J4125 4-core) - Firmware 5.0.0.1891 (2021/12/21)

@pdulvp
Copy link
Owner Author

pdulvp commented Jan 25, 2022 •
edited

So far so good on TS-453D (Intel Celeron J4125 4-core) - Firmware 5.0.0.1891 (2021/12/21)

Nice, good to know it works on firmware 5.0 too.
Thanks

@karlscheer
Copy link

Installed, boots, and plays music on my TS-653A just fine

@Medic97
Copy link

Medic97 commented Mar 21, 2022

Working on TS-453Be with latest 5.0

@ZeVince
Copy link

ZeVince commented Mar 31, 2022

Upgraded from 10.7.7-1 to 10.8.0-beta1 without any problems on TS-453D firmware 5.0.0.1986
Thanks!

@WindProtect
Copy link

Working well on TS-462C (Intel® Celeron® N4505) (fw 5.0.0.1986)
Thanks!

@MoFanFr
Copy link

MoFanFr commented Apr 30, 2022

Work with TS-464C

@sazaog
Copy link

sazaog commented May 1, 2022

HS-453DX working fine

@kaneorotar
Copy link

Working on TS-453Be with latest 5.0

Were you able to get hardware accelerated transcoding working?

I followed the steps in the README but it's seemingly not using hardware (FPS ends up in the single digits). The stream mapping in the log shows libx264 instead of h264_vaapi.

Stream mapping:
  Stream #0:0 -> #0:0 (h264 (native) -> h264 (libx264))
  Stream #0:1 -> #0:1 (aac (native) -> aac (native))

@hunterparks
Copy link

Working on the TS-653A, FW 5.0.0.2055, 2022/06/14

@theincomlive
Copy link

theincomlive commented Jul 1, 2022 •
edited

TS-251+ = TS-451+ as well... 2 and 4 stands for bays, in term you can say TS-X51+

i'll have tested every releases and every time i have uninstalled.
This goes for both TS-X51+ QTS 5.0.0.2055

so her is what i've have noticed:

every version of 10.8.0 will have problem with playing media even if i change vaapidriver.

every version of 10.7.7 will run fine, out of the box, -
until Mar 24 version 10771.10771.4414_4534ae84
https://github.com/pdulvp/jellyfin-qnap/releases/tag/10771.10771.4414_4534ae84

Edit:
newest update on [10.8.4-1] is a working
https://github.com/pdulvp/jellyfin-qnap/releases/tag/10841.10841.511_2

@qam4
Copy link

qam4 commented Jul 2, 2022

I have a TS-253Be, Jellyfin is working, but I cannot get hardware acceleration to work.

@Gaudi111
Copy link

Gaudi111 commented Jul 3, 2022

Hi, it does work on a TS-469 Pro, firmware 4.3.4 build 20220303.
Version 10.80.
What I do not seem to make work is the Plugins Catalog (it shows empty) and the DLNA announcement (for example VLC does not recognize the server).
Other than that it works as expected.
Atom D2700 is not powerful enough to do any type of transcoding.

@freedomcatjin
Copy link

freedomcatjin commented Jul 7, 2022 •
edited

Completed Work on the TS-453Bmini
os version:5.0.1
jellyfin version:10.8.0/10.8.1

@PeterJRVV
Copy link

Working on TS-364
Firmware: 5.0.0.2131
Jellyfin version 10.8.4-1

@mattbaker-digital
Copy link

Tested on TS-453 Pro
Firmware 5.0.0

@starlays
Copy link

Any luck with Qnap ARM TS-228?
Thank you.

@gummykage
Copy link

gummykage commented Sep 18, 2022 •
edited

Qnap TS-853 Pro (Intel Celeron 1.9ghz / 4 cores / 8gb ram latest firmware 5.01), installed, port changed, movies scraped, VAAPI Hardware acceleration working, transcodes at 120+ fps when on, and 50 fps when off. I wanted so a say a huge thank you for really making my weekend, I hope I can return the love.

@dooo12332
Copy link

working on Qnap TS-551
Firmware 5.0.1

@Obi8
Copy link

Obi8 commented Sep 29, 2022

@Tyrap: How do you install the package on TS-364?
When I start the app, the window that opens (browser) tells me that I cannot connect to the Jellyfin server.
And is hardware accelaration working with the intel gpu?

Please I need your help. Because I no longer know what to do. :-(

@dooo12332
Copy link

dooo12332 commented Sep 30, 2022 via email

@mincequi
Copy link

Will this work with TS-251 (without +)?
Or what's the cheapest QNAP device to run jellyfin?
Only used for music playback.

@schleyk
Copy link

schleyk commented Oct 30, 2022 •
edited

working on QNAP TS-451D2
Firmware: QTS 5.0.1
Jellyfin: 10.8.5 (with Hardware Acceleration)

@rextal
Copy link

rextal commented Nov 21, 2022

TS-451D2 QTS 5.0.1

Apologies in advance if this sounds confusing but I'm not a Linux guru and getting my head around how QTS works makes my head hurt a bit, but much nicer than OMV which I previously had on a home built unit.

I already have Jellyfin running in container station but updating it is a pain. I also tried Portainer as someone eluded it could manage updates better but it's so infrequent I forget a lot. So I added your repository in Appstore and installed your QNAP Jellyfin package which created the desktop icon on my NAS.

When I click on the Jellyfin icon on the NAS desktop it directs to 8096 port which is the same as the container version and I'm back to the containerised Jellyfin server as admin, I can see in the Jellyfin dashboard it is the server name I created in container station. I also have the option of logging as the user for the containerised version.

I was hoping to set up the media directories and do library scan on the package install without having to stop the container as it will take a long time scanning media files.

Do I have to stop the container version and then set up the OS level server? Or am i missing something blatantly obvious about the OS level version setup? I presume the OS version will automatically not launch server when it detects another server already running on the machine and only run as client. If I try to launch a second Jellyfin server in container station it will show errors about resource conflicts but the OS version doesn't say anything.

I cleared browser cache and on different browsers too. I can log in as a user to the container server via the OS level initiated session too.

@ludovicderochethales
Copy link

Will this work with TS-251 (without +)? Or what's the cheapest QNAP device to run jellyfin? Only used for music playback.

It works with TS-251D at least (including hardware transcoding)

@richjeffery
Copy link

Works with TS-269L with expanded RAM to 3GB, with caveats that the web interface can sometimes fail to add images when you manually select one (the loading icon spins), and the web version can return 404 if you try and move about too quickly. I've also disabled transcoding - whilst it probably would work, it's a relatively slow processor so you're probably better off not transcoding and doing that off-device.

@KacerCZ
Copy link

KacerCZ commented Nov 30, 2022

Jellyfin 10.8.7 works on QNAP TS-664 (QTS 5.0.1) with hardware accelaration (Intel QuickSync).

@theincomlive
Copy link

Will this work with TS-251 (without +)? Or what's the cheapest QNAP device to run jellyfin? Only used for music playback.

Sorry for a late answer.

As fare as i know the plus means remote, and there should be amount of same specs similar to mine... TS-251+ and TS-451+ Both are Intel® Celeron® GHz dual-core processor, with swappable rams and hdmi...

if anyone has a seccond opinion please let me know!

@pho084
Copy link

pho084 commented Dec 28, 2022

will this work on a ts-230? with hardware acc and all?

(Realtek RTD1296 4-Core, 1,4GHz , 64-Bit ARM)

@richjeffery
Copy link

Works with TS-269L with expanded RAM to 3GB [...] I've also disabled transcoding - whilst it probably would work, it's a relatively slow processor
The TS-269L is based on an Intel Atom D2550, which has a GMA 3650 graphics card built in. As such, it supposedly allows VA-API transcoding support. I'm not sure whether it's the most efficient option, but it's something and I have enabled it without explosion.

@staaky
Copy link

staaky commented Jan 2, 2023 •
edited

Works on IS-400 Pro (QTS 4.3.6.2232), but plugin catalog is also empty.

@sennahoj0
Copy link

sennahoj0 commented Jan 27, 2023 •
edited

Jellyfin Release 10.8.9-1
works on TS-873A (running QuTS Hero h5.0.1.2277)
with Quadro P400 hardware transcoding (NvKernelDriver 5.0.1.2277 + NVIDIA GPU Driver 5.1.0.0822 using this fix to enable NVIDIA NVENC transcoding)

@davetappy
Copy link

works fine on a tbs-464 running QTS 5.0.1.2277

@martydingo
Copy link

Works on TS-973ax, however no hardware acceleration due to no GPU.

@fa-ribeiro
Copy link

fa-ribeiro commented Apr 8, 2023 •
edited

Working like a charm on TVS-H474-PT-8G and QuTShero 5.0.1

@humorForus
Copy link

Working on TS-873A， but cannot use the Nvidia GTX 1050ti on hardware acceleration.

@brietman brietman mentioned this issue May 15, 2023
Open
@xilochen
Copy link

Work with TS-453A

@adonetgithub
Copy link

Jellyfin 10.8.9-1 works fine on my QNAP 253D NAS (with (gb of RAM). Ther files are on an external harddrive using USB3.
One thing doesn't work however and that is the go back arrow or home button when in a sub menu. I have to reload the whole page on my desktop.
Casting using chromecast however works fine.

@pdm-pcb
Copy link

pdm-pcb commented Jun 14, 2023 •
edited

Release 10.8.10-1 worked with TS-473A on firmware version h4.5.4.2374, until I tried enabling hardware acceleration for the Quadro P400 I've got installed. It turns out the 460-something Nvidia driver available for QuTS 4.5 is older than what the included ffmpeg version requires. After upgrading to h5.1.0.2409 (and following the progression of this thread as mentioned by others) everything came together just fine.

@pringleprng
Copy link

pringleprng commented Jul 7, 2023 •
edited

I don't comment very much but what pdm-pcb mention worked specifically this part of that thread for me:

ssh in to the device as “admin”. No other user will work due to file permissions.
Edit "/etc/ld.so.conf" using your editor of choice such as vim.
Add a new line with the contents "/opt/NVIDIA_GPU_DRV/usr/lib" (Note directory is correct for the QuTS Hero OS and driver versions at the top of the thread.)
Save the file.
Run ldconfig
Restart Plex Media Server.

This is now running fine on TS-h686
I also forgot to mention its working great with a nvidia 1050 Ti

Update: The only issue now is that it doesn't save once you reboot the NAS system.

@jploaiza
Copy link

How can I build an ARM v7 QNAP TS-431 version? this one do not work on it...

@pkok
Copy link

pkok commented Sep 3, 2023

This worked great on my TS-251D, as others also reported. However, after a system update to version 5.1.1 build 20230815. With this version, it keeps stating that Jellyfin has a required update, which it cannot find or install.

@pdulvp is this easy to fix? Is there a quick workaround that I could do?

@AndreaElijha
Copy link

cannot install on TS-451D
sad

@Dendim0n
Copy link

It works on the TS-453Bmini
os version:5.1.1.2491
jellyfin version:10.8.11

@adonetgithub
Copy link

It works on the TS-453Bmini os version:5.1.1.2491 jellyfin version:10.8.11
Hi Dendim0n

In the repositories of the author I see these versions:
pdulvp has version 10.8.10-1 date 2023-07-14
pdulvp pre releases has version 10.8.1-1 date 2022-07-08
where do you find 10.8.11?

Thanx

@Dendim0n
Copy link

It's the latest release
https://github.com/pdulvp/jellyfin-qnap/releases/tag/108111.108111.5136_c1ebb413

It works on the TS-453Bmini os version:5.1.1.2491 jellyfin version:10.8.11
Hi Dendim0n

In the repositories of the author I see these versions: pdulvp has version 10.8.10-1 date 2023-07-14 pdulvp pre releases has version 10.8.1-1 date 2022-07-08 where do you find 10.8.11?

Thanx

@adonetgithub
Copy link

Thank you, I donẗ see them in his repository yet.
afbeelding

@U-RU-SAIDESU
Copy link

jellyfin version：10.8.11-1 in TS-453Dmini os version: 5.1.2.2533 Everything is running normally |适用于 TS-453Dmini 操作系统：5.1.2.2533 jellyfin 版本：10.8.11-1 一切正常。

@Kein90
Copy link

Kein90 commented Nov 21, 2023

Works on my Qnap TS-464-8G with most video files. however got a problem with a 2160p.UHD.Remux.HEVC.DoVi.TrueHD.Atmos.7.1-playBD.mkv file on smaller screens. I think it's a transcoding problem but can't figure it out.

Jellyfin Version: 10.8.11
QTS 5.1.2.2533

@Kein90
Copy link

Kein90 commented Nov 25, 2023 •
edited

Can this be installed in a container somehow? Is there such a version? I'd like to have that plug-in

@schleyk
Copy link

schleyk commented Nov 25, 2023

Can this be installed in a container somehow? Is there such a version? I'd like to have that plug-in

Yes, you can run it with the official Docker container.
But you will probably have problems with the hardware transcoding.

this here in the repo is a custom QNAP app.

@chrisjace
Copy link

chrisjace commented Jan 7, 2024 •
edited

QNAP TS 677 with PCIe GPU Nvidia GTX 1050 Ti and hardware acceleration
NVIDIA-SMI 515.48.07, CUDA Version: 11.7
QTS 5.0.1.2376
Jellyfin 10.8.11 working fine.

@thomoosterveer
Copy link

Jellyfin 10.8.7 works on QNAP TS-664 (QTS 5.0.1) with hardware accelaration (Intel QuickSync).

Yes confirmed, indeed TS-664 with QTS 5.1.5 as well with hardware acceleration enable.

@DanC-FR
Copy link

DanC-FR commented Mar 21, 2024

tvs-h674 I3 : working great too.

@gearhead765
Copy link

gearhead765 commented Apr 3, 2024 •
edited

Just verifying JellyFin is working on a TS-473A with QuTS 5.1.5.2680 20240220. Nvidia P1000 requires CUDA fix above with "/opt/NVIDIA_GPU_DRV/usr/nvidia" as the directory for transcoding. This has to be done every time the NAS reboots. I have a support ticket in with QNAP about getting this fixed.

@sennahoj0
Copy link

sennahoj0 commented Apr 3, 2024 •
edited

Can this be installed in a container somehow? Is there such a version? I'd like to have that plug-in

i got fed up with transcoding not working after restarts and since moved to a container solution with working transcoding:
https://gist.github.com/sennahoj0/9dc14617559a8a4df8a14eb194e7ba23

@pdulvp
Copy link
Owner Author

pdulvp commented Jun 4, 2024 •
edited

How can I build an ARM v7 QNAP TS-431 version? this one do not work on it...

New experimental arm builds are available. Can be tested.
https://github.com/pdulvp/jellyfin-qnap/releases/tag/1094.1094.6017-c_9290780e

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests