NRC7292_SW_PKG_v1.3.4_rev13

This is the list of features/issues changes that are added at this release.
Please refer to the detailed release note at RN-7292-001-SW_PKG_release_note (v1.3.4_rev13).pdf

3.1 Features in version 1.3.4_rev13

• N/A

3.2 Resolved issues

• Bug fix for following issues
  (1) wrong self_config results on 2/4MHz of KR MIC SW package
  (2) beacon loss on relay STA
  (3) converged CS time after 'set tx_time' cli_app command
  (4) initialized duty cycle setting after target recovery

3.3 Changed items

• Offload CQM (Connection Quality Monitor) handling onto host driver
• Suppress overrun log for the host platform with a lower clock speed CPU
• Make "cli_app set self_config" command work only when the country code is matched to the regulatory domain
• Support half-duplex SPI
• Improve power calibration and compensation accuracy affecting the revised JP and KR-MIC channelization
• JP channel spur suppression
• Add the logging file permission check to 'show signal' cli_app command
• Initialize frame sequence number after reconnection

3.4 Known issues

• Host Mode
  o Not Support 5 US CHs for hostapd CH capacity reason
  (Not supported CH : 100(BW_1M, 925.5MHz), 104(BW_1M, 926.5MHz), 108(BW_1M, 927.5MHz), 112(BW_2M, 927MHz), 116(BW_4M, 926MHz))
• Hostapd
  o Not Support 5 US CHs due to hostapd CH capacity reason
  (Not supported CH: 100(BW_1M, 925.5MHz), 104(BW_1M, 926.5MHz), 108(BW_1M, 927.5MHz), 112(BW_2M, 927MHz), 116(BW_4M, 926MHz))
  o Due to the legacy Wi-Fi/HaLow channel mapping, "hostapd_cli chan_switch" command can’t be applied to following radar channels:
  5500(#100/925.5MHz), 5520(#104/926.5MHz), 5540(#108/927.5MHz), 5560(#112/927MHz), 5580(#116/926MHz)
• Mesh
  o DHCP failure or delay in multi-hop MBSS
  (Note: recommend using static IP in more than 3-hop MBSS)
• Relay
  o Not supported on KR MIC package
  (The concurrent mode can’t be applied due to the KR MIC regulation)