NRC7292_SW_PKG_v1.3.4_rev09

This is the list of features/issues changes that are added at this release.
Please refer to the detailed release note at RN-7292-001-SW_PKG_release_note (v1.3.4_rev09).pdf

3.1 Features in version 1.3.4_rev09

• N/A

3.2 Resolved issues

• Bug fix for following issues
  (1) false warning by rx length mismatch
  (2) occasional TX stop issue on duty cycle setting via cli_app
  (3) mac80211 halt when nrc driver faces queue overflow
  (4) guard interval setting issue for VIF1 of concurrent mode
  (5) ping failure between bridge mode STA/AP using WPA2-Enterprise
  (6) ping delay issue on RPi4
  (7) round up CS (Carrier Sense) time
  (8) reconnect failure issue on JP channel
  (9) unwanted emission for JP regulatory domain

3.3 Changed items

• Intuitionally display A-MPDU status via “cli_app show maxagg” command
• Support to set TX power by iw command for OpenWRT
• Enable the 1MHz TX filter for JP channel

3.4 Known issues

• Host Mode
  o Not Support 5 US CHs for hostapd CH capacity reason
  (Not supported CH : 100(BW_1M, 925.5MHz), 104(BW_1M, 926.5MHz), 108(BW_1M, 927.5MHz), 112(BW_2M, 927MHz), 116(BW_4M, 926MHz))
• Mesh
  o DHCP failure or delay in multi-hop MBSS
  (Note: recommend using static IP in more than 3-hop MBSS)
• Relay
  o Not supported on KR MIC package
  (The concurrent mode can’t be applied due to the KR MIC regulation)