Any code or hardware design files that are already protected by open source licenses are provided under the same license. For all original works, those files are provided under the following:
All software, source code, pseudocode and other documentation, drawings and anything else software releated is released under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License. This documentation is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. Please see http://creativecommons.org/licenses/by-nc-sa/4.0/ for applicable conditions.
All hardware, design files, 3D printing related files, schematics, PCB board files and anything else hardware-related is released under CERN OHL v. 1.2. You may redistribute and modify this documentation under the terms of the CERN OHL v.1.2. (http://ohwr.org/cernohl). This documentation is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. Please see the CERN OHL v.1.2 for applicable conditions.
We disclaim all liability for damages resulting from the use of the provided files.
BuddyBot: Building Your Pet a Robot Buddy - In this project we're going to use stepper motors and the STM Nucleo to have a little fun with our four legged companions. Exercise and fun are necessary for humans and pets alike to maintain a balanced lifestyle. For our pets there is no better way to get them running around then by chasing the red dot of a laser pointer. But as engineers and makers just holding a laser pointer in our hand is np fun, we need to add a little electronic magic! So in this project we will build a system that lets a user control the laser pointer via an Android app, or for when we are just too busy we'll add an automated "robot" mode to keep our pets entertained.
The key hardware components of this project include the STM Nucleo F401RE, stepper motors, ultrasonic sensors, and a Bluetooth serial communications module.
This project was written for Mouser Electronics and their Bench Talk Open Source Hardware Blog whcih you can find at mouser.com/blog