fan2go

A daemon to control the fans of your computer.

Features

UI

fan2go is a simple terminal client and controller daemon. To allow external programs to interact with it there is an API that can be (optionally) enabled.

UI Clients

fan2go-tui - (Official) Terminal UI for fan2go.

How to use

fan2go relies on lm-sensors to get both temperature and RPM sensor readings, as well as PWM controls, so you will have to set it up first.

Installation

Arch Linux

yay -S fan2go-git

Community Maintained Packages

Nix OS

Nix with Flakes:

nix profile install nixpkgs#fan2go

Nix stable:

nix-env -f '<nixpkgs>' -iA fan2go

Manual

Download the latest release from GitHub:

# Install dependencies
sudo pacman -S libnotify

curl -L -o fan2go https://github.com/markusressel/fan2go/releases/latest/download/fan2go-linux-amd64
chmod +x fan2go
sudo cp ./fan2go /usr/bin/fan2go
fan2go -h

Or compile yourself:

git clone https://github.com/markusressel/fan2go.git
cd fan2go
make build
sudo cp ./bin/fan2go /usr/bin/fan2go
sudo chmod ug+x /usr/bin/fan2go

Configuration

Then configure fan2go by creating a YAML configuration file in one of the following locations:

/etc/fan2go/fan2go.yaml (recommended)
/root/.fan2go/fan2go.yaml
./fan2go.yaml

sudo mkdir /etc/fan2go
sudo nano /etc/fan2go/fan2go.yaml

The most important configuration options you need to define are the fans:, sensors: and curves: sections.

Fans

Under fans: you need to define a list of fan devices that you want to control using fan2go. To detect fans on your system run fan2go detect, which will print a list of devices exposed by the hwmon filesystem backend:

> fan2go detect
nct6798
 Fans     Index  Channel  Label        RPM   PWM  Auto
          1      1        hwmon4/fan1  0     153  false
          2      2        hwmon4/fan2  1223  104  false
          3      3        hwmon4/fan3  677   107  false
 Sensors   Index   Label    Value
           1       SYSTIN   41000
           2       CPUTIN   64000

amdgpu-pci-0031
 Fans     Index  Channel  Label        RPM   PWM  Auto
          1      1        hwmon8/fan1  561   43   false
 Sensors   Index   Label      Value
           1       edge       58000
           2       junction   61000
           3       mem        56000

The fan index is based on device enumeration and is not stable for a given fan if hardware configuration changes. The Linux kernel hwmon channel is a better identifier for configuration as it is largely based on the fan headers in use.

Fan RPM, PWM, and temperature sensors are independent and Linux does not associate them automatically. A given PWM may control more than one fan, and a fan may not be under the control of a PWM. By default, fan2go guesses and sets the pwm channel number for a given fan to the fan's RPM sensor channel. You can override this in the config.

HwMon

To use detected devices in your configuration, use the hwmon fan type:

# A list of fans to control
fans:
  # A user defined ID.
  # Used for logging only
  - id: cpu
    # The type of fan configuration, one of: hwmon | file
    hwmon:
      # A regex matching a controller platform displayed by `fan2go detect`, f.ex.:
      # "nouveau", "coretemp", "it8620", "corsaircpro-*" etc.
      platform: nct6798
      # The channel of this fan's RPM sensor as displayed by `fan2go detect`
      rpmChannel: 1
      # The pwm channel that controls this fan; fan2go defaults to same channel number as fan RPM
      pwmChannel: 1
    # Indicates whether this fan should never stop rotating, regardless of
    # how low the curve value is
    neverStop: true
    # The curve ID that should be used to determine the
    # speed of this fan
    curve: cpu_curve

File

fans:
  - id: file_fan
    file:
      # Path to a file to set the PWM target for this fan
      path: /tmp/file_fan
      # Path to a file to read the current RPM value of this fan
      rpmPath: /tmp/file_fan_rpm

> cat /tmp/file_fan
255
> cat /tmp/file_fan_rpm
3421

CMD

Please also make sure to read the section about considerations for using the cmd sensor/fan.

fans:
  - id: cmd_fan
    cmd:
      # (optional) Command to apply a new PWM value (0..255)
      #  use "%pwm%" to specify where the target pwm value should be used withing the arguments
      setPwm:
        exec: /usr/bin/some-program
        args: [ "--set", "%pwm%" ]
      # (optional) Command to retrieve the current PWM value (0..255)
      getPwm:
        exec: /usr/bin/nvidia-settings
        args: [ "-a", "someargument" ]
      # (optional) Command to retrieve the current RPM value
      getRpm:
        exec: /usr/bin/nvidia-settings
        args: [ "-a", "someargument" ]

Advanced Options

If the automatic fan curve analysis doesn't provide a good enough estimation for how the fan behaves, you can use the following configuration options (per fan definition) to correct it:

fans:
  - id: ...
    ...
    # (Optional) Override for the lowest PWM value at which the
    # fan is able to maintain rotation if it was spinning previously.
    minPwm: 30
    # (Optional) Override for the lowest PWM value at which the
    # fan will still be able to start rotating.
    # Note: Settings this to a value that is too small
    #       may damage your fans. Use at your own risk!
    startPwm: 30
    # (Optional) Override for the highest PWM value which still yields
    # an increased rotational speed compared to lower values.
    # Note: you can also use this to limit the max speed of a fan.
    maxPwm: 255
    # (Optional) Override for the PWM map used internally by fan2go for
    # mapping the "normal" 0-255 value range to values supported by this fan.
    # This can be used to compensate for a very limited set of supported values
    # (f.ex. off, low, high). If not set manually, the map will be computed
    # automatically by fan2go during fan initialization.
    pwmMap:
      0: 0
      64: 128
      192: 255

Sensors

Under sensors: you need to define a list of temperature sensor devices that you want to monitor and use to adjust fanspeeds. Like with fans, you can find usable devices using fan2go detect.

HwMon

# A list of sensors to monitor
sensors:
  # A user defined ID, which is used to reference
  # a sensor in a curve configuration (see below)
  - id: cpu_package
    # The type of sensor configuration, one of: hwmon | file | cmd
    hwmon:
      # A regex matching a controller platform displayed by `fan2go detect`, f.ex.:
      # "coretemp", "it8620", "corsaircpro-*" etc.
      platform: coretemp
      # The index of this sensor as displayed by `fan2go detect`
      index: 1

File

sensors:
  - id: file_sensor
    file:
      # Path to the file containing sensor values
      path: /tmp/file_sensor

The file contains a value in milli-units, like f.ex. milli-degrees.

> cat /tmp/file_sensor
10000

CMD

Please also make sure to read the section about considerations for using the cmd sensor/fan.

Just like the file sensor, the command must output the sensor value in milli-units, like f.ex. milli-degrees.

sensors:
  - id: cmd_fan
    cmd:
      # Path to the executable to run to retrieve the current sensor value
      exec: /usr/bin/bash
      # (optional) arguments to pass to the executable
      args: [ '/home/markus/myscript.sh' ]

Curves

Under curves: you need to define a list of fan speed curves, which represent the speed of a fan based on one or more temperature sensors.

Linear

To create a simple, linear speed curve, use a curve of type linear.

This curve type can be used with a min/max sensor value, where the min temp will result in a curve value of 0 and the max temp will result in a curve value of 255:

curves:
  - id: cpu_curve
    # The type of the curve, one of: linear | function
    linear:
      # The sensor ID to use as a temperature input
      sensor: cpu_package
      # Sensor input value at which the curve is at minimum speed
      min: 40
      # Sensor input value at which the curve is at maximum speed
      max: 80

You can also define the curve in multiple, linear sections using the steps parameter:

curves:
  - id: cpu_curve
    # The type of the curve
    linear:
      # The sensor ID to use as a temperature input
      sensor: cpu_package
      # Steps to define a section-wise defined speed curve function.
      steps:
        # Sensor value -> Speed (in pwm)
        - 40: 0
        - 50: 50
        - 80: 255

PID

If you want to get your hands dirty and use a PID based curve, you can use pid:

curves:
  - id: pid_curve
    pid:
      sensor: cpu_package
      setPoint: 60
      p: -0.05
      i: -0.005
      d: -0.005

Unlike the other curve types, this one does not use the average of the sensor data to calculate its value, which allows you to create a completely custom behaviour. Keep in mind though that the fan controller is also PID based and will also affect how the curve is applied to the fan.

Function

To create more complex curves you can combine exising curves using a curve of type function:

curves:
  - id: case_avg_curve
    function:
      # Type of aggregation function to use, one of: minimum | maximum | average | delta | sum | difference
      type: average
      # A list of curve IDs to use
      curves:
        - cpu_curve
        - mainboard_curve
        - ssd_curve

Example

An example configuration file including more detailed documentation can be found in fan2go.yaml.

Verify your Configuration

To check whether your configuration is correct before actually running fan2go you can use:

> sudo fan2go config validate
 INFO  Using configuration file at: /etc/fan2go/fan2go.yaml
 SUCCESS  Config looks good! :)

or to validate a specific config file:

> fan2go -c "./my_config.yaml" config validate
 INFO  Using configuration file at: ./my_config.yaml
 WARNING  Unused curve configuration: m2_first_ssd_curve
  ERROR   Validation failed: Curve m2_ssd_curve: no curve definition with id 'm2_first_ssd_curve123' found

Using external commands for sensors/fans

fan2go supports using external executables for use as both sensor input, as well as fan output (and rpm input). There are some considerations you should take into account before using this feature though:

Security

Since fan2go requires root permissions to interact with lm-sensors, executables run by fan2go are also executed as root. To prevent some malicious actor from taking advantage of this fan2go will only allow the execution of files that only allow the root user (UID 0) to modify the file.

Side effects

Running external commands repeatedly through fan2go can have unintended side effects. F.ex., on a laptop using hybrid graphics, running nvidia-settings can cause the dedicated GPU to wake up, resulting in substantial increase in power consumption while on battery. Also, fan2go expects to be able to update sensor values with a minimal delay, so using a long running script or some network call with a long timeout could also cause problems. With great power comes great responsibility, always remember that :)

Run

After successfully verifying your configuration you can launch fan2go from the CLI and make sure the initial setup is working as expected. Assuming you put your configuration file in /etc/fan2go/fan2go.yaml run:

> fan2go help                                                                                                                                                                              2 (0.032s) < 22:43:49
fan2go is a simple daemon that controls the fans
on your computer based on temperature sensors.

Usage:
  fan2go [flags]
  fan2go [command]

Available Commands:
  completion  Generate the autocompletion script for the specified shell
  config      Configuration related commands
  curve       Curve related commands
  detect      Detect fans and sensors
  fan         Fan related commands
  help        Help about any command
  sensor      Sensor related commands
  version     Print the version number of fan2go

Flags:
  -c, --config string   config file (default is $HOME/.fan2go.yaml)
  -h, --help            help for fan2go
      --no-color        Disable all terminal output coloration
      --no-style        Disable all terminal output styling
  -v, --verbose         More verbose output

Use "fan2go [command] --help" for more information about a command.
> sudo fan2go

Alternatively you can specify the path to your configuration file like this:

> sudo fan2go -c /home/markus/my_fan2go_config.yaml

As a Service

Systemd

When installing fan2go using a package, it comes with a systemd unit file. To enable it simply run:

sudo systemctl daemon-reload
sudo systemctl enable --now fan2go
# follow logs
journalctl -u fan2go -f

NOTE: If you want to use a config path that differs from the default one, make sure to edit the unit file and point the -c flag to the correct path.

CLI Commands

Although fan2go is a fan controller daemon at heart, it also provides some handy cli commands to interact with the devices that you have specified within your config.

Fans interaction

> fan2go fan --id cpu speed 100

> fan2go fan --id cpu speed
255

> fan2go fan --id cpu rpm
546

> fan2go fan --id cpu mode
No control, 100% all the time (0)

> fan2go fan --id cpu mode auto
Automatic control by integrated hardware (2)

Sensors

> fan2go sensor --id cpu_package
46000

Print fan curve data

For each newly configured fan fan2go measures its fan curve and stores it in a db for future reference. You can take a look at this measurement using the following command:

> sudo fan2go curve
nct6798 -> pwm1

 Start PWM   0
 Max PWM     255

No fan curve data yet...


nct6798 -> pwm2

 Start PWM   0
 Max PWM     194

 1994 ┤                                                                          ╭────────────────────────
 1900 ┤                                                                       ╭──╯
 1805 ┤                                                                  ╭────╯
 1711 ┤                                                             ╭────╯
 1616 ┤                                                        ╭────╯
 1522 ┤                                                    ╭───╯
 1427 ┤                                               ╭────╯
 1333 ┤                                          ╭────╯
 1238 ┤                                    ╭─────╯
 1144 ┤                               ╭────╯
 1049 ┤                         ╭─────╯
  955 ┤                   ╭─────╯
  860 ┤             ╭─────╯
  766 ┤       ╭─────╯
  671 ┤ ╭─────╯
  577 ┼─╯
                                                    RPM / PWM

Statistics

fan2go has a prometheus exporter built in, which you can use to extract data over time. Simply enable it in your configuration and you are good to go:

statistics:
  # Whether to enable the prometheus exporter or not
  enabled: true
  # The port to expose the exporter on
  port: 9000

You can then see the metics on http://localhost:9000/metrics while the fan2go daemon is running.

API

fan2go comes with a built-in REST Api. This API can be used by third party tools to display (and in the future possibly modify) the state of fans, sensors and curves within fan2go.

api:
  # Whether to enable the API or not
  enabled: false
  # The host to listen for connections
  host: localhost
  # The port to listen for connections
  port: 9001

Endpoints

Currently, this API is read-only and only provides REST endpoints. If there is demand for it, this might be expanded to also support realtime communication via websockets.

Fans

Endpoint	Type	Description
`/fan`	GET	Returns a list of all currently configured fans
`/fan/<id>`	GET	Returns the fan with the given `id`, if it exists

Sensors

Endpoint	Type	Description
`/sensor`	GET	Returns a list of all currently configured sensors
`/sensor/<id>`	GET	Returns the sensor with the given `id`, if it exists

Curves

Endpoint	Type	Description
`/curve`	GET	Returns a list of all currently configured curves
`/curve/<id>`	GET	Returns the curve with the given `id`, if it exists

How it works

Device detection

fan2go uses gosensors to directly interact with lm-sensors.

Initialization

To properly control a fan which fan2go has not seen before, its speed curve is analyzed. This means

spinning down the fans to 0
slowly ramping up the speed and monitoring RPM changes along the way

Note that this takes approx. 8 1/2 minutes, since we have to wait for the fan speed to settle before taking measurements. Measurements taken during this process will then be used to determine the lowest PWM value at which the fan is still running, as well as the highest PWM value that still yields a change in RPM.

All of this is saved to a local database (path given by the dbPath config option), so it is only needed once per fan configuration.

To reduce the risk of runnin the whole system on low fan speeds for such a long period of time, you can force fan2go to initialize only one fan at a time, using the runFanInitializationInParallel: false config option.

Some PWM controllers or fans may require more time to react to PWM changes. If fan2go is failing to characterize a fan, you can try increasing the fan response delay by passing --fan-response-delay <seconds> to the fan init command or by setting fanResponseDelay in the config. The default value is 2 seconds.

Monitoring

Temperature and RPM sensors are polled continuously at the rate specified by the tempSensorPollingRate config option. tempRollingWindowSize/rpmRollingWindowSize amount of measurements are always averaged and stored as the average sensor value.

Fan Controllers

Fan speed is controlled by a PID controller per each configured fan. The default configuration is pretty non-aggressive using the following values:

P	I	D
`0.03`	`0.002`	`0.0005`

If you don't like the default behaviour you can configure your own in the config:

fans:
  - id: some_fan
    ...
    controlLoop:
      p: 0.03
      i: 0.002
      d: 0.0005

The loop is advanced at a constant rate, specified by the controllerAdjustmentTickRate config option, which defaults to 200ms.

FAQ

Why are my SATA HDD drives not detected?

TL;DR: modprobe drivetemp

While lm-sensors doesn't provide temperature sensors of SATA drives by default, you can use the kernel module drivetemp to enable this. See here

WARNING: PWM of `<fan>` was changed by third party!

If you see this log message while running fan2go, fan2go detected a change of the PWM value for the given fan that was not caused by fan2go itself. This usually means that fan2go is not the only program controlling the fan and something else (like f.ex. the mainboard or another fan control software) is also running and changing the speed of the fan, competing with fan2go. Since fan2go cannot figure out what other software is, you have to investigate this yourself.

Another common reason this message can occur is when the driver of the fan in question does not actually support setting the PWM directly and uses some kind of virtual PWM instead. This has been a problem mostly on AMD graphics cards but is probably not limitied to them. See #64 for more detail.

My components are overheating during initialization, what can I do about this?

TL;DR: Skip the initialization and configure your fans manually.

The initialization phase measures the RPM curve of each fan and tries to estimate the minimum and maximum boundaries. This can take quite a while though and can lead to overheating of components if they are under load. To avoid this use the minPwm and maxPwm fan config options to set the boundaries yourself. That way the initialization phase will be skipped and the control algorithm will start right away.

Dependencies

See go.mod

Similar Projects

License

fan2go
Copyright (C) 2021  Markus Ressel

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU Affero General Public License as published
by the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU Affero General Public License for more details.

You should have received a copy of the GNU Affero General Public License
along with this program.  If not, see <https://www.gnu.org/licenses/>.

Name		Name	Last commit message	Last commit date
Latest commit History 864 Commits
.github		.github
cmd		cmd
internal		internal
screenshots		screenshots
test		test
.gitignore		.gitignore
LICENSE		LICENSE
Makefile		Makefile
README.md		README.md
fan2go.service		fan2go.service
fan2go.yaml		fan2go.yaml
go.mod		go.mod
go.sum		go.sum
main.go		main.go

License

markusressel/fan2go

Folders and files

Latest commit

History

Repository files navigation

fan2go

A daemon to control the fans of your computer.

Features

UI

UI Clients

How to use

Installation

Arch Linux

Nix OS

Manual

Configuration

Fans

HwMon

File

CMD

Advanced Options

Sensors

HwMon

File

CMD

Curves

Linear

PID

Function

Example

Verify your Configuration

Using external commands for sensors/fans

Security

Side effects

Run

As a Service

Systemd

CLI Commands

Fans interaction

Sensors

Print fan curve data

Statistics

API

Endpoints

Fans

Sensors

Curves

How it works

Device detection

Initialization

Monitoring

Fan Controllers

FAQ

Why are my SATA HDD drives not detected?

WARNING: PWM of <fan> was changed by third party!

My components are overheating during initialization, what can I do about this?

Dependencies

Similar Projects

License

About

Topics

Resources

License

Stars

Watchers

Forks

Sponsor this project

Languages

WARNING: PWM of `<fan>` was changed by third party!