Skip to content
This repository has been archived by the owner on Jan 29, 2023. It is now read-only.
/ STM32_Slow_PWM Public archive

This library enables you to use Hardware Timers on STM32F/L/H/G/WB/MP1 boards to create and output PWM to pins. The most important feature is they're purely hardware-based PWM channels. Therefore, their executions are not blocked by bad-behaving functions or tasks. This important feature is absolutely necessary for mission-critical tasks. These …

License

Notifications You must be signed in to change notification settings

khoih-prog/STM32_Slow_PWM

Repository files navigation

STM32_Slow_PWM Library

arduino-library-badge GitHub release GitHub contributions welcome GitHub issues

Donate to my libraries using BuyMeACoffee



Table of Contents



Important Change from v1.2.0

Please have a look at HOWTO Fix Multiple Definitions Linker Error

As more complex calculation and check inside ISR are introduced from v1.2.0, there is possibly some crash depending on use-case.

You can modify to use larger HW_TIMER_INTERVAL_US, (from current 20uS), according to your board and use-case if crash happens.

// Current 20uS
#define HW_TIMER_INTERVAL_US      20L


Why do we need this STM32_Slow_PWM library

Features

This library enables you to use Hardware Timers on STM32F/L/H/G/WB/MP1 boards such as NUCLEO_H743ZI2, NUCLEO_L552ZE_Q, NUCLEO_F767ZI, BLUEPILL_F103CB, etc., to create and output PWM to pins. Because this library doesn't use the powerful hardware-controlled PWM with limitations, the maximum PWM frequency is currently limited at 1000Hz, which is suitable for many real-life applications. Now you can also modify PWM settings on-the-fly.


This library enables you to use Interrupt from Hardware Timers on STM32F/L/H/G/WB/MP1 boards to create and output PWM to pins. It now supports 16 ISR-based synchronized PWM channels, while consuming only 1 Hardware Timer. PWM interval can be very long (uint32_t millisecs). The most important feature is they're ISR-based PWM channels. Therefore, their executions are not blocked by bad-behaving functions or tasks. This important feature is absolutely necessary for mission-critical tasks. These hardware PWM channels, using interrupt, still work even if other functions are blocking. Moreover, they are much more precise (certainly depending on clock frequency accuracy) than other software PWM using millis() or micros(). That's necessary if you need to measure some data requiring better accuracy.

As Hardware Timers are rare, and very precious assets of any board, this library now enables you to use up to 16 ISR-based synchronized PWM channels, while consuming only 1 Hardware Timer. Timers' interval is very long (ulong millisecs).

Now with these new 16 ISR-based PWM-channels, the maximum interval is practically unlimited (limited only by unsigned long milliseconds) while the accuracy is nearly perfect compared to software timers.

The most important feature is they're ISR-based PWM channels. Therefore, their executions are not blocked by bad-behaving functions / tasks. This important feature is absolutely necessary for mission-critical tasks.

The PWMs_Array_Complex example will demonstrate the nearly perfect accuracy, compared to software PWM, by printing the actual period / duty-cycle in microsecs of each of PWM-channels.

Being ISR-based PWM, their executions are not blocked by bad-behaving functions / tasks, such as connecting to WiFi, Internet or Blynk services. You can also have many (up to 16) timers to use.

This non-being-blocked important feature is absolutely necessary for mission-critical tasks.

You'll see software-based SimpleTimer is blocked while system is connecting to WiFi / Internet / Blynk, as well as by blocking task in loop(), using delay() function as an example. The elapsed time then is very unaccurate


Why using ISR-based PWM is better

Imagine you have a system with a mission-critical function, measuring water level and control the sump pump or doing something much more important. You normally use a software timer to poll, or even place the function in loop(). But what if another function is blocking the loop() or setup().

So your function might not be executed, and the result would be disastrous.

You'd prefer to have your function called, no matter what happening with other functions (busy loop, bug, etc.).

The correct choice is to use a Hardware Timer with Interrupt to call your function.

These hardware timers, using interrupt, still work even if other functions are blocking. Moreover, they are much more precise (certainly depending on clock frequency accuracy) than other software timers using millis() or micros(). That's necessary if you need to measure some data requiring better accuracy.

Functions using normal software timers, relying on loop() and calling millis(), won't work if the loop() or setup() is blocked by certain operation. For example, certain function is blocking while it's connecting to WiFi or some services.

The catch is your function is now part of an ISR (Interrupt Service Routine), and must be lean / mean, and follow certain rules. More to read on:

HOWTO Attach Interrupt


Currently supported Boards

  1. STM32F/L/H/G/WB/MP1 boards such as NUCLEO_H743ZI2, NUCLEO_L552ZE_Q, NUCLEO_F767ZI, BLUEPILL_F103CB, etc., using Arduino Core for STM32

Important Notes about ISR

  1. Inside the attached function, delay() won’t work and the value returned by millis() will not increment. Serial data received while in the function may be lost. You should declare as volatile any variables that you modify within the attached function.

  2. Typically global variables are used to pass data between an ISR and the main program. To make sure variables shared between an ISR and the main program are updated correctly, declare them as volatile.



Prerequisites

  1. Arduino IDE 1.8.19+ for Arduino. GitHub release
  2. Arduino Core for STM32 v2.3.0+ for STM32F/L/H/G/WB/MP1 boards. GitHub release
  3. To use with certain example


Installation

Use Arduino Library Manager

The best and easiest way is to use Arduino Library Manager. Search for STM32_Slow_PWM, then select / install the latest version. You can also use this link arduino-library-badge for more detailed instructions.

Manual Install

Another way to install is to:

  1. Navigate to STM32_Slow_PWM page.
  2. Download the latest release STM32_Slow_PWM-main.zip.
  3. Extract the zip file to STM32_Slow_PWM-main directory
  4. Copy whole STM32_Slow_PWM-main folder to Arduino libraries' directory such as ~/Arduino/libraries/.

VS Code & PlatformIO

  1. Install VS Code
  2. Install PlatformIO
  3. Install STM32_Slow_PWM library by using Library Manager. Search for STM32_Slow_PWM in Platform.io Author's Libraries
  4. Use included platformio.ini file from examples to ensure that all dependent libraries will installed automatically. Please visit documentation for the other options and examples at Project Configuration File


HOWTO Fix Multiple Definitions Linker Error

The current library implementation, using xyz-Impl.h instead of standard xyz.cpp, possibly creates certain Multiple Definitions Linker error in certain use cases.

You can include this .hpp file

// Can be included as many times as necessary, without `Multiple Definitions` Linker Error
#include "STM32_Slow_PWM.hpp"     //https://github.com/khoih-prog/STM32_Slow_PWM

in many files. But be sure to use the following .h file in just 1 .h, .cpp or .ino file, which must not be included in any other file, to avoid Multiple Definitions Linker Error

// To be included only in main(), .ino with setup() to avoid `Multiple Definitions` Linker Error
#include "STM32_Slow_PWM.h"           //https://github.com/khoih-prog/STM32_Slow_PWM

Check the new multiFileProject example for a HOWTO demo.

Have a look at the discussion in Different behaviour using the src_cpp or src_h lib #80



More useful Information about STM32 Timers

The Timers of STM32s are numerous, yet very sophisticated and powerful.

In general, across the STM32 microcontrollers families, the timer peripherals that have the same name also have the same features set, but there are a few exceptions.

For example, the TIM1 timer peripheral is shared across the STM32F1 Series, STM32F2 Series and STM32F4 Series, but for the specific case of STM32F30x microcontrollers family, the TIM1 timer peripheral features a bit richer features set than the TIM1 present in the other families.

The general purpose timers embedded by the STM32 microcontrollers share the same backbone structure; they differ only on the level of features embedded by a given timer peripheral.

The level of features integration for a given timer peripheral is decided based on the applications field that it targets.

The timer peripherals can be classified as: • Advanced-configuration timers like TIM1 and TIM8 among others. • General-purpose configuration timers like TIM2 and TIM3 among others • Lite-configuration timers like TIM9, TIM10, TIM12 and TIM16 among others • Basic-configuration timers like TIM6 and TIM7 among others.

For example, STM32F103C8T6 has one advance timer, while STM32F103VET6 has two advanced timers. Nucleo-144 STM32F767ZI boards have 14 Timers, TIM1-TIM14.

More information can be found at Embedded-Lab STM32 TIMERS

To be sure which Timer is available for the board you're using, check the Core Package's related files. For example, for Nucleo-144 STM32F767ZI, check these files:

  1. ~/.arduino15/packages/STM32/hardware/stm32/1.9.0/system/Drivers/CMSIS/Device/ST/STM32F7xx/Include/stm32f7xx.h
  2. ~/.arduino15/packages/STM32/hardware/stm32/1.9.0/system/Drivers/CMSIS/Device/ST/STM32F7xx/Include/stm32f767xx.h

The information will be as follows:

typedef struct
{
  __IO uint32_t CR1;         /*!< TIM control register 1,              Address offset: 0x00 */
  __IO uint32_t CR2;         /*!< TIM control register 2,              Address offset: 0x04 */
  __IO uint32_t SMCR;        /*!< TIM slave mode control register,     Address offset: 0x08 */
  __IO uint32_t DIER;        /*!< TIM DMA/interrupt enable register,   Address offset: 0x0C */
  __IO uint32_t SR;          /*!< TIM status register,                 Address offset: 0x10 */
  __IO uint32_t EGR;         /*!< TIM event generation register,       Address offset: 0x14 */
  __IO uint32_t CCMR1;       /*!< TIM capture/compare mode register 1, Address offset: 0x18 */
  __IO uint32_t CCMR2;       /*!< TIM capture/compare mode register 2, Address offset: 0x1C */
  __IO uint32_t CCER;        /*!< TIM capture/compare enable register, Address offset: 0x20 */
  __IO uint32_t CNT;         /*!< TIM counter register,                Address offset: 0x24 */
  __IO uint32_t PSC;         /*!< TIM prescaler,                       Address offset: 0x28 */
  __IO uint32_t ARR;         /*!< TIM auto-reload register,            Address offset: 0x2C */
  __IO uint32_t RCR;         /*!< TIM repetition counter register,     Address offset: 0x30 */
  __IO uint32_t CCR1;        /*!< TIM capture/compare register 1,      Address offset: 0x34 */
  __IO uint32_t CCR2;        /*!< TIM capture/compare register 2,      Address offset: 0x38 */
  __IO uint32_t CCR3;        /*!< TIM capture/compare register 3,      Address offset: 0x3C */
  __IO uint32_t CCR4;        /*!< TIM capture/compare register 4,      Address offset: 0x40 */
  __IO uint32_t BDTR;        /*!< TIM break and dead-time register,    Address offset: 0x44 */
  __IO uint32_t DCR;         /*!< TIM DMA control register,            Address offset: 0x48 */
  __IO uint32_t DMAR;        /*!< TIM DMA address for full transfer,   Address offset: 0x4C */
  __IO uint32_t OR;          /*!< TIM option register,                 Address offset: 0x50 */
  __IO uint32_t CCMR3;       /*!< TIM capture/compare mode register 3,      Address offset: 0x54 */
  __IO uint32_t CCR5;        /*!< TIM capture/compare mode register5,       Address offset: 0x58 */
  __IO uint32_t CCR6;        /*!< TIM capture/compare mode register6,       Address offset: 0x5C */
  __IO uint32_t AF1;         /*!< TIM Alternate function option register 1, Address offset: 0x60 */
  __IO uint32_t AF2;         /*!< TIM Alternate function option register 2, Address offset: 0x64 */

} TIM_TypeDef;

and

#define PERIPH_BASE            0x40000000UL /*!< Base address of : AHB/ABP Peripherals   
/*!< Peripheral memory map */
#define APB1PERIPH_BASE        PERIPH_BASE

/*!< APB1 peripherals */
#define TIM2_BASE             (APB1PERIPH_BASE + 0x0000UL)
#define TIM3_BASE             (APB1PERIPH_BASE + 0x0400UL)
#define TIM4_BASE             (APB1PERIPH_BASE + 0x0800UL)
#define TIM5_BASE             (APB1PERIPH_BASE + 0x0C00UL)
#define TIM6_BASE             (APB1PERIPH_BASE + 0x1000UL)
#define TIM7_BASE             (APB1PERIPH_BASE + 0x1400UL)
#define TIM12_BASE            (APB1PERIPH_BASE + 0x1800UL)
#define TIM13_BASE            (APB1PERIPH_BASE + 0x1C00UL)
#define TIM14_BASE            (APB1PERIPH_BASE + 0x2000UL)

/*!< APB2 peripherals */
#define TIM1_BASE             (APB2PERIPH_BASE + 0x0000UL)
#define TIM8_BASE             (APB2PERIPH_BASE + 0x0400UL)
#define TIM9_BASE             (APB2PERIPH_BASE + 0x4000UL)
#define TIM10_BASE            (APB2PERIPH_BASE + 0x4400UL)
#define TIM11_BASE            (APB2PERIPH_BASE + 0x4800UL)

...

#define TIM2                ((TIM_TypeDef *) TIM2_BASE)
#define TIM3                ((TIM_TypeDef *) TIM3_BASE)
#define TIM4                ((TIM_TypeDef *) TIM4_BASE)
#define TIM5                ((TIM_TypeDef *) TIM5_BASE)
#define TIM6                ((TIM_TypeDef *) TIM6_BASE)
#define TIM7                ((TIM_TypeDef *) TIM7_BASE)
#define TIM12               ((TIM_TypeDef *) TIM12_BASE)
#define TIM13               ((TIM_TypeDef *) TIM13_BASE)
#define TIM14               ((TIM_TypeDef *) TIM14_BASE)
...
#define TIM1                ((TIM_TypeDef *) TIM1_BASE)
#define TIM8                ((TIM_TypeDef *) TIM8_BASE)
...
#define TIM9                ((TIM_TypeDef *) TIM9_BASE)
#define TIM10               ((TIM_TypeDef *) TIM10_BASE)
#define TIM11               ((TIM_TypeDef *) TIM11_BASE)

Available Timers for STM32

Because STM32 boards and Timers are numerous, changing and so complex, there can never be a complete and correct list of available Timers to use.

This is the temporary list for STM32F/L/H/G/WB/MP1 Timers which can possibly be used. The available Timers certainly depends on whether they are being used for other purpose (core, application, libraries, etc.) or not. You have to exhausively test, research, verify by yourself to be sure.

1. OK to use

If exists, otherwise, compiler error will happen

TIM1, TIM4, TIM7, TIM8, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17

2. Not exist

TIM9, TIM10, TIM11. Only for STM32F2, STM32F4 or STM32L1

3.Not declared

TIM18, TIM19, TIM20, TIM21, TIM22

3. Not OK => conflict or crash

TIM2, TIM3, TIM5, TIM6



Usage

Before using any Timer for a PWM channel, you have to make sure the Timer has not been used by any other purpose.

1. Init Hardware Timer

// Depending on the board, you can select STM32H7 Hardware Timer from TIM1-TIM22
// If you select a Timer not correctly, you'll get a message from compiler
// 'TIMxx' was not declared in this scope; did you mean 'TIMyy'? 

// STM32F/L/H/G/WB/MP1 OK       : TIM1, TIM4, TIM7, TIM8, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17
// STM32F/L/H/G/WB/MP1 Not OK   : TIM2, TIM3, TIM5, TIM6, TIM18, TIM19, TIM20, TIM21, TIM22
// STM32F/L/H/G/WB/MP1 No timer : TIM9, TIM10, TIM11. Only for STM32F2, STM32F4 and STM32L1 
// STM32F/L/H/G/WB/MP1 No timer : TIM18, TIM19, TIM20, TIM21, TIM22

// Init timer TIM1
STM32Timer ITimer(TIM1);

// Init STM32_Slow_PWM
STM32_Slow_PWM ISR_PWM;

2. Set PWM Frequency, dutycycle, attach irqCallbackStartFunc and irqCallbackStopFunc functions

void irqCallbackStartFunc()
{

}

void irqCallbackStopFunc()
{

}

void setup()
{
  ....
  
  // You can use this with PWM_Freq in Hz
    ISR_PWM.setPWM(PWM_Pin, PWM_Freq, PWM_DutyCycle, irqCallbackStartFunc, irqCallbackStopFunc);
                   
  ....                 
}  


Examples:

  1. ISR_16_PWMs_Array
  2. ISR_16_PWMs_Array_Complex
  3. ISR_16_PWMs_Array_Simple
  4. ISR_Changing_PWM
  5. ISR_Modify_PWM
  6. multiFileProject New


#if !( defined(STM32F0) || defined(STM32F1) || defined(STM32F2) || defined(STM32F3) ||defined(STM32F4) || defined(STM32F7) || \
defined(STM32L0) || defined(STM32L1) || defined(STM32L4) || defined(STM32H7) ||defined(STM32G0) || defined(STM32G4) || \
defined(STM32WB) || defined(STM32MP1) || defined(STM32L5))
#error This code is designed to run on STM32F/L/H/G/WB/MP1 platform! Please check your Tools->Board setting.
#endif
// These define's must be placed at the beginning before #include "STM32_Slow_PWM.h"
// _PWM_LOGLEVEL_ from 0 to 4
// Don't define _PWM_LOGLEVEL_ > 0. Only for special ISR debugging only. Can hang the system.
#define _PWM_LOGLEVEL_ 3
#define USING_MICROS_RESOLUTION true //false
// Default is true, uncomment to false
//#define CHANGING_PWM_END_OF_CYCLE false
#define MAX_STM32_PWM_FREQ 1000
// To be included only in main(), .ino with setup() to avoid `Multiple Definitions` Linker Error
#include "STM32_Slow_PWM.h"
#define boolean bool
#include <SimpleTimer.h> // https://github.com/jfturcot/SimpleTimer
#define LED_OFF LOW
#define LED_ON HIGH
#ifndef LED_BUILTIN
#define LED_BUILTIN 13
#endif
#ifndef LED_BLUE
#define LED_BLUE 2
#endif
#ifndef LED_RED
#define LED_RED 3
#endif
#define HW_TIMER_INTERVAL_US 20L
volatile uint64_t startMicros = 0;
// Depending on the board, you can select H7 Hardware Timer from TIM1-TIM22
// If you select a Timer not correctly, you'll get a message from compiler
// 'TIMxx' was not declared in this scope; did you mean 'TIMyy'?
// STM32 OK : TIM1, TIM4, TIM7, TIM8, TIM12, TIM13, TIM14, TIM15, TIM16, TIM17
// STM32 Not OK : TIM2, TIM3, TIM5, TIM6, TIM18, TIM19, TIM20, TIM21, TIM22
// STM32 No timer : TIM9, TIM10, TIM11. Only for F2, F4 and STM32L1
// STM32 No timer : TIM18, TIM19, TIM20, TIM21, TIM22
// Init timer TIM1
STM32Timer ITimer(TIM1);
// Init STM32_Slow_PWM
STM32_Slow_PWM ISR_PWM;
//////////////////////////////////////////////////////
void TimerHandler()
{
ISR_PWM.run();
}
/////////////////////////////////////////////////
#define NUMBER_ISR_PWMS 16
#define PIN_D0 D0
#define PIN_D1 D1
#define PIN_D2 D2
#define PIN_D3 D3
#define PIN_D4 D4
#define PIN_D5 D5
#define PIN_D6 D6
#define PIN_D7 D7
#define PIN_D8 D8
#define PIN_D9 D9
#define PIN_D10 D10
#define PIN_D11 D11
#define PIN_D12 D12
typedef void (*irqCallback) ();
//////////////////////////////////////////////////////
#define USE_COMPLEX_STRUCT true
#define USING_PWM_FREQUENCY true
//////////////////////////////////////////////////////
#if USE_COMPLEX_STRUCT
typedef struct
{
uint32_t PWM_Pin;
irqCallback irqCallbackStartFunc;
irqCallback irqCallbackStopFunc;
#if USING_PWM_FREQUENCY
float PWM_Freq;
#else
uint32_t PWM_Period;
#endif
float PWM_DutyCycle;
uint64_t deltaMicrosStart;
uint64_t previousMicrosStart;
uint64_t deltaMicrosStop;
uint64_t previousMicrosStop;
} ISR_PWM_Data;
// In NRF52, avoid doing something fancy in ISR, for example Serial.print()
// The pure simple Serial.prints here are just for demonstration and testing. Must be eliminate in working environment
// Or you can get this run-time error / crash
void doingSomethingStart(int index);
void doingSomethingStop(int index);
#else // #if USE_COMPLEX_STRUCT
volatile unsigned long deltaMicrosStart [] = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
volatile unsigned long previousMicrosStart [] = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
volatile unsigned long deltaMicrosStop [] = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
volatile unsigned long previousMicrosStop [] = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
// You can assign pins here. Be carefull to select good pin to use or crash, e.g pin 6-11
uint32_t PWM_Pin[] =
{
LED_BUILTIN, LED_BLUE, LED_RED, PIN_D0, PIN_D1, PIN_D2, PIN_D3, PIN_D4,
PIN_D5, PIN_D6, PIN_D7, PIN_D8, PIN_D9, PIN_D10, PIN_D11, PIN_D12
};
// You can assign any interval for any timer here, in microseconds
uint32_t PWM_Period[] =
{
1000000, 500000, 333333, 250000, 200000, 166667, 142857, 125000,
111111, 100000, 66667, 50000, 40000, 33333, 25000, 20000
};
// You can assign any interval for any timer here, in Hz
float PWM_Freq[] =
{
1.0f, 2.0f, 3.0f, 4.0f, 5.0f, 6.0f, 7.0f, 8.0f,
9.0f, 10.0f, 15.0f, 20.0f, 25.0f, 30.0f, 40.0f, 50.0f
};
// You can assign any interval for any timer here, in milliseconds
float PWM_DutyCycle[] =
{
5.00, 10.00, 20.00, 30.00, 40.00, 45.00, 50.00, 55.00,
60.00, 65.00, 70.00, 75.00, 80.00, 85.00, 90.00, 95.00
};
void doingSomethingStart(int index)
{
unsigned long currentMicros = micros();
deltaMicrosStart[index] = currentMicros - previousMicrosStart[index];
previousMicrosStart[index] = currentMicros;
}
void doingSomethingStop(int index)
{
unsigned long currentMicros = micros();
// Count from start to stop PWM pulse
deltaMicrosStop[index] = currentMicros - previousMicrosStart[index];
previousMicrosStop[index] = currentMicros;
}
#endif // #if USE_COMPLEX_STRUCT
////////////////////////////////////
// Shared
////////////////////////////////////
void doingSomethingStart0()
{
doingSomethingStart(0);
}
void doingSomethingStart1()
{
doingSomethingStart(1);
}
void doingSomethingStart2()
{
doingSomethingStart(2);
}
void doingSomethingStart3()
{
doingSomethingStart(3);
}
void doingSomethingStart4()
{
doingSomethingStart(4);
}
void doingSomethingStart5()
{
doingSomethingStart(5);
}
void doingSomethingStart6()
{
doingSomethingStart(6);
}
void doingSomethingStart7()
{
doingSomethingStart(7);
}
void doingSomethingStart8()
{
doingSomethingStart(8);
}
void doingSomethingStart9()
{
doingSomethingStart(9);
}
void doingSomethingStart10()
{
doingSomethingStart(10);
}
void doingSomethingStart11()
{
doingSomethingStart(11);
}
void doingSomethingStart12()
{
doingSomethingStart(12);
}
void doingSomethingStart13()
{
doingSomethingStart(13);
}
void doingSomethingStart14()
{
doingSomethingStart(14);
}
void doingSomethingStart15()
{
doingSomethingStart(15);
}
//////////////////////////////////////////////////////
void doingSomethingStop0()
{
doingSomethingStop(0);
}
void doingSomethingStop1()
{
doingSomethingStop(1);
}
void doingSomethingStop2()
{
doingSomethingStop(2);
}
void doingSomethingStop3()
{
doingSomethingStop(3);
}
void doingSomethingStop4()
{
doingSomethingStop(4);
}
void doingSomethingStop5()
{
doingSomethingStop(5);
}
void doingSomethingStop6()
{
doingSomethingStop(6);
}
void doingSomethingStop7()
{
doingSomethingStop(7);
}
void doingSomethingStop8()
{
doingSomethingStop(8);
}
void doingSomethingStop9()
{
doingSomethingStop(9);
}
void doingSomethingStop10()
{
doingSomethingStop(10);
}
void doingSomethingStop11()
{
doingSomethingStop(11);
}
void doingSomethingStop12()
{
doingSomethingStop(12);
}
void doingSomethingStop13()
{
doingSomethingStop(13);
}
void doingSomethingStop14()
{
doingSomethingStop(14);
}
void doingSomethingStop15()
{
doingSomethingStop(15);
}
//////////////////////////////////////////////////////
#if USE_COMPLEX_STRUCT
#if USING_PWM_FREQUENCY
ISR_PWM_Data curISR_PWM_Data[] =
{
// pin, irqCallbackStartFunc, irqCallbackStopFunc, PWM_Freq, PWM_DutyCycle, deltaMicrosStart, previousMicrosStart, deltaMicrosStop, previousMicrosStop
{ LED_BUILTIN, doingSomethingStart0, doingSomethingStop0, 1.0, 5.0, 0, 0, 0, 0 },
{ LED_BLUE, doingSomethingStart1, doingSomethingStop1, 2.0, 10.0, 0, 0, 0, 0 },
{ LED_RED, doingSomethingStart2, doingSomethingStop2, 3.0, 20.0, 0, 0, 0, 0 },
{ PIN_D0, doingSomethingStart3, doingSomethingStop3, 4.0, 30.0, 0, 0, 0, 0 },
{ PIN_D1, doingSomethingStart4, doingSomethingStop4, 5.0, 40.0, 0, 0, 0, 0 },
{ PIN_D2, doingSomethingStart5, doingSomethingStop5, 6.0, 45.0, 0, 0, 0, 0 },
{ PIN_D3, doingSomethingStart6, doingSomethingStop6, 7.0, 50.0, 0, 0, 0, 0 },
{ PIN_D4, doingSomethingStart7, doingSomethingStop7, 8.0, 55.0, 0, 0, 0, 0 },
{ PIN_D5, doingSomethingStart8, doingSomethingStop8, 9.0, 60.0, 0, 0, 0, 0 },
{ PIN_D6, doingSomethingStart9, doingSomethingStop9, 10.0, 65.0, 0, 0, 0, 0 },
{ PIN_D7, doingSomethingStart10, doingSomethingStop10, 15.0, 70.0, 0, 0, 0, 0 },
{ PIN_D8, doingSomethingStart11, doingSomethingStop11, 20.0, 75.0, 0, 0, 0, 0 },
{ PIN_D9, doingSomethingStart12, doingSomethingStop12, 25.0, 80.0, 0, 0, 0, 0 },
{ PIN_D10, doingSomethingStart13, doingSomethingStop13, 30.0, 85.0, 0, 0, 0, 0 },
{ PIN_D11, doingSomethingStart14, doingSomethingStop14, 40.0, 90.0, 0, 0, 0, 0 },
{ PIN_D12, doingSomethingStart15, doingSomethingStop15, 50.0, 95.0, 0, 0, 0, 0 }
};
#else // #if USING_PWM_FREQUENCY
ISR_PWM_Data curISR_PWM_Data[] =
{
// pin, irqCallbackStartFunc, irqCallbackStopFunc, PWM_Period, PWM_DutyCycle, deltaMicrosStart, previousMicrosStart, deltaMicrosStop, previousMicrosStop
{ LED_BUILTIN, doingSomethingStart0, doingSomethingStop0, 1000000, 5.0, 0, 0, 0, 0 },
{ LED_BLUE, doingSomethingStart1, doingSomethingStop1, 500000, 10.0, 0, 0, 0, 0 },
{ LED_RED, doingSomethingStart2, doingSomethingStop2, 333333, 20.0, 0, 0, 0, 0 },
{ PIN_D0, doingSomethingStart3, doingSomethingStop3, 250000, 30.0, 0, 0, 0, 0 },
{ PIN_D1, doingSomethingStart4, doingSomethingStop4, 200000, 40.0, 0, 0, 0, 0 },
{ PIN_D2, doingSomethingStart5, doingSomethingStop5, 166667, 45.0, 0, 0, 0, 0 },
{ PIN_D3, doingSomethingStart6, doingSomethingStop6, 142857, 50.0, 0, 0, 0, 0 },
{ PIN_D4, doingSomethingStart7, doingSomethingStop7, 125000, 55.0, 0, 0, 0, 0 },
{ PIN_D5, doingSomethingStart8, doingSomethingStop8, 111111, 60.0, 0, 0, 0, 0 },
{ PIN_D6, doingSomethingStart9, doingSomethingStop9, 100000, 65.0, 0, 0, 0, 0 },
{ PIN_D7, doingSomethingStart10, doingSomethingStop10, 66667, 70.0, 0, 0, 0, 0 },
{ PIN_D8, doingSomethingStart11, doingSomethingStop11, 50000, 75.0, 0, 0, 0, 0 },
{ PIN_D9, doingSomethingStart12, doingSomethingStop12, 40000, 80.0, 0, 0, 0, 0 },
{ PIN_D10, doingSomethingStart13, doingSomethingStop13, 33333, 85.0.0, 0, 0, 0, 0 },
{ PIN_D11, doingSomethingStart14, doingSomethingStop14, 25000, 90.0, 0, 0, 0, 0 },
{ PIN_D12, doingSomethingStart15, doingSomethingStop15, 20000, 95.0, 0, 0, 0, 0 }
};
#endif // #if USING_PWM_FREQUENCY
void doingSomethingStart(int index)
{
unsigned long currentMicros = micros();
curISR_PWM_Data[index].deltaMicrosStart = currentMicros - curISR_PWM_Data[index].previousMicrosStart;
curISR_PWM_Data[index].previousMicrosStart = currentMicros;
}
void doingSomethingStop(int index)
{
unsigned long currentMicros = micros();
//curISR_PWM_Data[index].deltaMicrosStop = currentMicros - curISR_PWM_Data[index].previousMicrosStop;
// Count from start to stop PWM pulse
curISR_PWM_Data[index].deltaMicrosStop = currentMicros - curISR_PWM_Data[index].previousMicrosStart;
curISR_PWM_Data[index].previousMicrosStop = currentMicros;
}
#else // #if USE_COMPLEX_STRUCT
irqCallback irqCallbackStartFunc[] =
{
doingSomethingStart0, doingSomethingStart1, doingSomethingStart2, doingSomethingStart3,
doingSomethingStart4, doingSomethingStart5, doingSomethingStart6, doingSomethingStart7,
doingSomethingStart8, doingSomethingStart9, doingSomethingStart10, doingSomethingStart11,
doingSomethingStart12, doingSomethingStart13, doingSomethingStart14, doingSomethingStart15
};
irqCallback irqCallbackStopFunc[] =
{
doingSomethingStop0, doingSomethingStop1, doingSomethingStop2, doingSomethingStop3,
doingSomethingStop4, doingSomethingStop5, doingSomethingStop6, doingSomethingStop7,
doingSomethingStop8, doingSomethingStop9, doingSomethingStop10, doingSomethingStop11,
doingSomethingStop12, doingSomethingStop13, doingSomethingStop14, doingSomethingStop15
};
#endif // #if USE_COMPLEX_STRUCT
//////////////////////////////////////////////////////
#define SIMPLE_TIMER_MS 2000L
// Init SimpleTimer
SimpleTimer simpleTimer;
// Here is software Timer, you can do somewhat fancy stuffs without many issues.
// But always avoid
// 1. Long delay() it just doing nothing and pain-without-gain wasting CPU power.Plan and design your code / strategy ahead
// 2. Very long "do", "while", "for" loops without predetermined exit time.
void simpleTimerDoingSomething2s()
{
static unsigned long previousMicrosStart = startMicros;
unsigned long currMicros = micros();
Serial.print(F("SimpleTimer (ms): ")); Serial.print(SIMPLE_TIMER_MS);
Serial.print(F(", us : ")); Serial.print(currMicros);
Serial.print(F(", Dus : ")); Serial.println(currMicros - previousMicrosStart);
for (uint16_t i = 0; i < NUMBER_ISR_PWMS; i++)
{
#if USE_COMPLEX_STRUCT
Serial.print(F("PWM Channel : ")); Serial.print(i);
Serial.print(F(", programmed Period (uS): "));
#if USING_PWM_FREQUENCY
Serial.print(1000000 / curISR_PWM_Data[i].PWM_Freq);
#else
Serial.print(curISR_PWM_Data[i].PWM_Period);
#endif
Serial.print(F(", actual (uS) : ")); Serial.print(curISR_PWM_Data[i].deltaMicrosStart);
Serial.print(F(", programmed DutyCycle : "));
Serial.print(curISR_PWM_Data[i].PWM_DutyCycle);
Serial.print(F(", actual : ")); Serial.println((float) curISR_PWM_Data[i].deltaMicrosStop * 100.0f / curISR_PWM_Data[i].deltaMicrosStart);
#else
Serial.print(F("PWM Channel : ")); Serial.print(i);
#if USING_PWM_FREQUENCY
Serial.print(1000000 / PWM_Freq[i]);
#else
Serial.print(PWM_Period[i]);
#endif
Serial.print(F(", programmed Period (uS): ")); Serial.print(PWM_Period[i]);
Serial.print(F(", actual (uS): ")); Serial.print(deltaMicrosStart[i]);
Serial.print(F(", programmed DutyCycle : "));
Serial.print(PWM_DutyCycle[i]);
Serial.print(F(", actual : ")); Serial.println( (float) deltaMicrosStop[i] * 100.0f / deltaMicrosStart[i]);
#endif
}
previousMicrosStart = currMicros;
}
void setup()
{
Serial.begin(115200);
while (!Serial);
delay(2000);
Serial.print(F("\nStarting ISR_16_PWMs_Array_Complex on ")); Serial.println(BOARD_NAME);
Serial.println(STM32_SLOW_PWM_VERSION);
// Interval in microsecs
if (ITimer.attachInterruptInterval(HW_TIMER_INTERVAL_US, TimerHandler))
{
startMicros = micros();
Serial.print(F("Starting ITimer OK, micros() = ")); Serial.println(startMicros);
}
else
Serial.println(F("Can't set ITimer. Select another freq. or timer"));
startMicros = micros();
// Just to demonstrate, don't use too many ISR Timers if not absolutely necessary
// You can use up to 16 timer for each ISR_PWM
for (uint16_t i = 0; i < NUMBER_ISR_PWMS; i++)
{
#if USE_COMPLEX_STRUCT
curISR_PWM_Data[i].previousMicrosStart = startMicros;
//ISR_PWM.setInterval(curISR_PWM_Data[i].PWM_Period, curISR_PWM_Data[i].irqCallbackStartFunc);
//void setPWM(uint32_t pin, float frequency, float dutycycle
// , timer_callback_p StartCallback = nullptr, timer_callback_p StopCallback = nullptr)
#if USING_PWM_FREQUENCY
// You can use this with PWM_Freq in Hz
ISR_PWM.setPWM(curISR_PWM_Data[i].PWM_Pin, curISR_PWM_Data[i].PWM_Freq, curISR_PWM_Data[i].PWM_DutyCycle,
curISR_PWM_Data[i].irqCallbackStartFunc, curISR_PWM_Data[i].irqCallbackStopFunc);
#else
// Or You can use this with PWM_Period in us
ISR_PWM.setPWM_Period(curISR_PWM_Data[i].PWM_Pin, curISR_PWM_Data[i].PWM_Period, curISR_PWM_Data[i].PWM_DutyCycle,
curISR_PWM_Data[i].irqCallbackStartFunc, curISR_PWM_Data[i].irqCallbackStopFunc);
#endif
#else
previousMicrosStart[i] = micros();
#if USING_PWM_FREQUENCY
// You can use this with PWM_Freq in Hz
ISR_PWM.setPWM(PWM_Pin[i], PWM_Freq[i], PWM_DutyCycle[i], irqCallbackStartFunc[i], irqCallbackStopFunc[i]);
#else
// Or You can use this with PWM_Period in us
ISR_PWM.setPWM_Period(PWM_Pin[i], PWM_Period[i], PWM_DutyCycle[i], irqCallbackStartFunc[i], irqCallbackStopFunc[i]);
#endif
#endif
}
// You need this timer for non-critical tasks. Avoid abusing ISR if not absolutely necessary.
simpleTimer.setInterval(SIMPLE_TIMER_MS, simpleTimerDoingSomething2s);
}
#define BLOCKING_TIME_MS 10000L
void loop()
{
// This unadvised blocking task is used to demonstrate the blocking effects onto the execution and accuracy to Software timer
// You see the time elapse of ISR_PWM still accurate, whereas very unaccurate for Software Timer
// The time elapse for 2000ms software timer now becomes 3000ms (BLOCKING_TIME_MS)
// While that of ISR_PWM is still prefect.
delay(BLOCKING_TIME_MS);
// You need this Software timer for non-critical tasks. Avoid abusing ISR if not absolutely necessary
// You don't need to and never call ISR_PWM.run() here in the loop(). It's already handled by ISR timer.
simpleTimer.run();
}



Debug Terminal Output Samples

1. ISR_16_PWMs_Array_Complex on NUCLEO_H743ZI2

The following is the sample terminal output when running example ISR_16_PWMs_Array_Complex on NUCLEO_H743ZI2 to demonstrate how to use multiple PWM channels with complex callback functions, the accuracy of ISR Hardware PWM-channels, especially when system is very busy. The ISR PWM-channels is running exactly according to corresponding programmed periods and duty-cycles

Starting ISR_16_PWMs_Array_Complex on NUCLEO_H743ZI2
STM32_SLOW_PWM v1.2.3
[PWM] STM32TimerInterrupt: Timer Input Freq (Hz) = 240000000
[PWM] Frequency = 1000000.00 , _count = 20
Starting ITimer OK, micros() = 2015843
Channel : 0	Period : 1000000		OnTime : 50000	Start_Time : 2019319
Channel : 1	Period : 500000		OnTime : 50000	Start_Time : 2019319
Channel : 2	Period : 333333		OnTime : 66666	Start_Time : 2019319
Channel : 3	Period : 250000		OnTime : 75000	Start_Time : 2019319
Channel : 4	Period : 200000		OnTime : 80000	Start_Time : 2019319
Channel : 5	Period : 166666		OnTime : 74999	Start_Time : 2019319
Channel : 6	Period : 142857		OnTime : 71428	Start_Time : 2019319
Channel : 7	Period : 125000		OnTime : 68750	Start_Time : 2019319
Channel : 8	Period : 111111		OnTime : 66666	Start_Time : 2019319
Channel : 9	Period : 100000		OnTime : 65000	Start_Time : 2019319
Channel : 10	Period : 66666		OnTime : 46666	Start_Time : 2019319
Channel : 11	Period : 50000		OnTime : 37500	Start_Time : 2019319
Channel : 12	Period : 40000		OnTime : 32000	Start_Time : 2019319
Channel : 13	Period : 33333		OnTime : 28333	Start_Time : 2019319
Channel : 14	Period : 25000		OnTime : 22500	Start_Time : 2019319
Channel : 15	Period : 20000		OnTime : 19000	Start_Time : 2019319
SimpleTimer (ms): 2000, us : 12111000, Dus : 10091682
PWM Channel : 0, programmed Period (uS): 1000000, actual (uS) : 1000000, programmed DutyCycle : 5, actual : 5.00
PWM Channel : 1, programmed Period (uS): 500000, actual (uS) : 500000, programmed DutyCycle : 10, actual : 10.00
PWM Channel : 2, programmed Period (uS): 333333, actual (uS) : 333340, programmed DutyCycle : 20, actual : 20.00
PWM Channel : 3, programmed Period (uS): 250000, actual (uS) : 250000, programmed DutyCycle : 30, actual : 30.00
PWM Channel : 4, programmed Period (uS): 200000, actual (uS) : 200020, programmed DutyCycle : 40, actual : 40.00
PWM Channel : 5, programmed Period (uS): 166666, actual (uS) : 166680, programmed DutyCycle : 45, actual : 45.00
PWM Channel : 6, programmed Period (uS): 142857, actual (uS) : 142860, programmed DutyCycle : 50, actual : 49.99
PWM Channel : 7, programmed Period (uS): 125000, actual (uS) : 125020, programmed DutyCycle : 55, actual : 54.98
PWM Channel : 8, programmed Period (uS): 111111, actual (uS) : 111120, programmed DutyCycle : 60, actual : 59.99
PWM Channel : 9, programmed Period (uS): 100000, actual (uS) : 100020, programmed DutyCycle : 65, actual : 64.99
PWM Channel : 10, programmed Period (uS): 66666, actual (uS) : 66680, programmed DutyCycle : 70, actual : 69.98
PWM Channel : 11, programmed Period (uS): 50000, actual (uS) : 50000, programmed DutyCycle : 75, actual : 75.00
PWM Channel : 12, programmed Period (uS): 40000, actual (uS) : 40000, programmed DutyCycle : 80, actual : 80.00
PWM Channel : 13, programmed Period (uS): 33333, actual (uS) : 33340, programmed DutyCycle : 85, actual : 84.94
PWM Channel : 14, programmed Period (uS): 25000, actual (uS) : 25000, programmed DutyCycle : 90, actual : 90.00
PWM Channel : 15, programmed Period (uS): 20000, actual (uS) : 20000, programmed DutyCycle : 95, actual : 95.00
SimpleTimer (ms): 2000, us : 22266000, Dus : 10155000
PWM Channel : 0, programmed Period (uS): 1000000, actual (uS) : 1000000, programmed DutyCycle : 5, actual : 5.00
PWM Channel : 1, programmed Period (uS): 500000, actual (uS) : 500000, programmed DutyCycle : 10, actual : 10.00
PWM Channel : 2, programmed Period (uS): 333333, actual (uS) : 333340, programmed DutyCycle : 20, actual : 20.00
PWM Channel : 3, programmed Period (uS): 250000, actual (uS) : 250020, programmed DutyCycle : 30, actual : 30.00
PWM Channel : 4, programmed Period (uS): 200000, actual (uS) : 200020, programmed DutyCycle : 40, actual : 40.00
PWM Channel : 5, programmed Period (uS): 166666, actual (uS) : 166680, programmed DutyCycle : 45, actual : 44.98
PWM Channel : 6, programmed Period (uS): 142857, actual (uS) : 142860, programmed DutyCycle : 50, actual : 49.99
PWM Channel : 7, programmed Period (uS): 125000, actual (uS) : 125000, programmed DutyCycle : 55, actual : 54.99
PWM Channel : 8, programmed Period (uS): 111111, actual (uS) : 111120, programmed DutyCycle : 60, actual : 59.99
PWM Channel : 9, programmed Period (uS): 100000, actual (uS) : 100000, programmed DutyCycle : 65, actual : 65.00
PWM Channel : 10, programmed Period (uS): 66666, actual (uS) : 66680, programmed DutyCycle : 70, actual : 69.98
PWM Channel : 11, programmed Period (uS): 50000, actual (uS) : 50000, programmed DutyCycle : 75, actual : 75.00
PWM Channel : 12, programmed Period (uS): 40000, actual (uS) : 40000, programmed DutyCycle : 80, actual : 80.00
PWM Channel : 13, programmed Period (uS): 33333, actual (uS) : 33340, programmed DutyCycle : 85, actual : 84.94
PWM Channel : 14, programmed Period (uS): 25000, actual (uS) : 25020, programmed DutyCycle : 90, actual : 89.93
PWM Channel : 15, programmed Period (uS): 20000, actual (uS) : 20000, programmed DutyCycle : 95, actual : 94.91

2. ISR_16_PWMs_Array_Complex on NUCLEO_F767ZI

The following is the sample terminal output when running example ISR_16_PWMs_Array_Complex on NUCLEO_F767ZI to demonstrate how to use multiple PWM channels with complex callback functions, the accuracy of ISR Hardware PWM-channels, especially when system is very busy. The ISR PWM-channels is running exactly according to corresponding programmed periods and duty-cycles

Starting ISR_16_PWMs_Array_Complex on NUCLEO_F767ZI
STM32_SLOW_PWM v1.2.3
[PWM] STM32TimerInterrupt: Timer Input Freq (Hz) = 216000000 , Timer Clock Frequency = 1000000.00
[PWM] Timer Frequency = 50000.00 , _count = 20
Starting ITimer OK, micros() = 2016555
Channel : 0	    Period : 1000000		OnTime : 50000	Start_Time : 2022112
Channel : 1	    Period : 500000		OnTime : 50000	Start_Time : 2027666
Channel : 2	    Period : 333333		OnTime : 66666	Start_Time : 2033231
Channel : 3	    Period : 250000		OnTime : 75000	Start_Time : 2038795
Channel : 4	    Period : 200000		OnTime : 80000	Start_Time : 2044365
Channel : 5	    Period : 166666		OnTime : 74999	Start_Time : 2049930
Channel : 6	    Period : 142857		OnTime : 71428	Start_Time : 2055495
Channel : 7	    Period : 125000		OnTime : 68750	Start_Time : 2061063
Channel : 8	    Period : 111111		OnTime : 66666	Start_Time : 2066628
Channel : 9	    Period : 100000		OnTime : 65000	Start_Time : 2072361
Channel : 10	    Period : 66666		OnTime : 46666	Start_Time : 2083313
Channel : 11	    Period : 50000		OnTime : 37500	Start_Time : 2088886
Channel : 12	    Period : 40000		OnTime : 32000	Start_Time : 2094451
Channel : 13	    Period : 33333		OnTime : 28333	Start_Time : 2100013
Channel : 14	    Period : 25000		OnTime : 22500	Start_Time : 2105584
Channel : 15	    Period : 20000		OnTime : 19000	Start_Time : 2111150
SimpleTimer (ms): 2000, us : 12116002, Dus : 10093908
PWM Channel : 0, programmed Period (uS): 1000000.00, actual (uS) : 1000000, programmed DutyCycle : 5.00, actual : 5.00
PWM Channel : 1, programmed Period (uS): 500000.00, actual (uS) : 500000, programmed DutyCycle : 10.00, actual : 10.00
PWM Channel : 2, programmed Period (uS): 333333.34, actual (uS) : 333340, programmed DutyCycle : 20.00, actual : 20.00
PWM Channel : 3, programmed Period (uS): 250000.00, actual (uS) : 250000, programmed DutyCycle : 30.00, actual : 30.00
PWM Channel : 4, programmed Period (uS): 200000.00, actual (uS) : 200000, programmed DutyCycle : 40.00, actual : 40.00
PWM Channel : 5, programmed Period (uS): 166666.67, actual (uS) : 166680, programmed DutyCycle : 45.00, actual : 44.98
PWM Channel : 6, programmed Period (uS): 142857.14, actual (uS) : 142860, programmed DutyCycle : 50.00, actual : 49.99
PWM Channel : 7, programmed Period (uS): 125000.00, actual (uS) : 125001, programmed DutyCycle : 55.00, actual : 54.99
PWM Channel : 8, programmed Period (uS): 111111.11, actual (uS) : 111120, programmed DutyCycle : 60.00, actual : 59.99
PWM Channel : 9, programmed Period (uS): 100000.00, actual (uS) : 100000, programmed DutyCycle : 65.00, actual : 65.00
PWM Channel : 10, programmed Period (uS): 66666.66, actual (uS) : 66680, programmed DutyCycle : 70.00, actual : 69.98
PWM Channel : 11, programmed Period (uS): 50000.00, actual (uS) : 50000, programmed DutyCycle : 75.00, actual : 75.00
PWM Channel : 12, programmed Period (uS): 40000.00, actual (uS) : 40000, programmed DutyCycle : 80.00, actual : 80.00
PWM Channel : 13, programmed Period (uS): 33333.33, actual (uS) : 33340, programmed DutyCycle : 85.00, actual : 84.94
PWM Channel : 14, programmed Period (uS): 25000.00, actual (uS) : 25000, programmed DutyCycle : 90.00, actual : 90.00
PWM Channel : 15, programmed Period (uS): 20000.00, actual (uS) : 20000, programmed DutyCycle : 95.00, actual : 95.00
SimpleTimer (ms): 2000, us : 22284001, Dus : 10167999
PWM Channel : 0, programmed Period (uS): 1000000.00, actual (uS) : 1000000, programmed DutyCycle : 5.00, actual : 5.00
PWM Channel : 1, programmed Period (uS): 500000.00, actual (uS) : 500000, programmed DutyCycle : 10.00, actual : 10.00
PWM Channel : 2, programmed Period (uS): 333333.34, actual (uS) : 333340, programmed DutyCycle : 20.00, actual : 20.00
PWM Channel : 3, programmed Period (uS): 250000.00, actual (uS) : 250000, programmed DutyCycle : 30.00, actual : 30.00
PWM Channel : 4, programmed Period (uS): 200000.00, actual (uS) : 200000, programmed DutyCycle : 40.00, actual : 40.00
PWM Channel : 5, programmed Period (uS): 166666.67, actual (uS) : 166680, programmed DutyCycle : 45.00, actual : 44.98
PWM Channel : 6, programmed Period (uS): 142857.14, actual (uS) : 142860, programmed DutyCycle : 50.00, actual : 49.99
PWM Channel : 7, programmed Period (uS): 125000.00, actual (uS) : 125000, programmed DutyCycle : 55.00, actual : 54.99
PWM Channel : 8, programmed Period (uS): 111111.11, actual (uS) : 111120, programmed DutyCycle : 60.00, actual : 59.99
PWM Channel : 9, programmed Period (uS): 100000.00, actual (uS) : 100000, programmed DutyCycle : 65.00, actual : 65.00
PWM Channel : 10, programmed Period (uS): 66666.66, actual (uS) : 66679, programmed DutyCycle : 70.00, actual : 69.98
PWM Channel : 11, programmed Period (uS): 50000.00, actual (uS) : 50000, programmed DutyCycle : 75.00, actual : 75.00
PWM Channel : 12, programmed Period (uS): 40000.00, actual (uS) : 40000, programmed DutyCycle : 80.00, actual : 80.00
PWM Channel : 13, programmed Period (uS): 33333.33, actual (uS) : 33341, programmed DutyCycle : 85.00, actual : 84.94
PWM Channel : 14, programmed Period (uS): 25000.00, actual (uS) : 25001, programmed DutyCycle : 90.00, actual : 90.00
PWM Channel : 15, programmed Period (uS): 20000.00, actual (uS) : 20000, programmed DutyCycle : 95.00, actual : 95.00

3. ISR_16_PWMs_Array_Complex on NUCLEO_L552ZE_Q

The following is the sample terminal output when running example ISR_16_PWMs_Array_Complex on NUCLEO_L552ZE_Q to demonstrate how to use multiple PWM channels with complex callback functions, the accuracy of ISR Hardware PWM-channels, especially when system is very busy. The ISR PWM-channels is running exactly according to corresponding programmed periods and duty-cycles

Starting ISR_16_PWMs_Array_Complex on NUCLEO_L552ZE_Q
STM32_SLOW_PWM v1.2.3
[PWM] STM32TimerInterrupt: Timer Input Freq (Hz) = 110000000
[PWM] Frequency = 1000000.00 , _count = 20
Starting ITimer OK, micros() = 2016141
Channel : 0	Period : 1000000		OnTime : 50000	Start_Time : 2019722
Channel : 1	Period : 500000		OnTime : 50000	Start_Time : 2019722
Channel : 2	Period : 333333		OnTime : 66666	Start_Time : 2019722
Channel : 3	Period : 250000		OnTime : 75000	Start_Time : 2019722
Channel : 4	Period : 200000		OnTime : 80000	Start_Time : 2019722
Channel : 5	Period : 166666		OnTime : 74999	Start_Time : 2019722
Channel : 6	Period : 142857		OnTime : 71428	Start_Time : 2019722
Channel : 7	Period : 125000		OnTime : 68750	Start_Time : 2019722
Channel : 8	Period : 111111		OnTime : 66666	Start_Time : 2019722
Channel : 9	Period : 100000		OnTime : 65000	Start_Time : 2019722
Channel : 10	Period : 66666		OnTime : 46666	Start_Time : 2019722
Channel : 11	Period : 50000		OnTime : 37500	Start_Time : 2019722
Channel : 12	Period : 40000		OnTime : 32000	Start_Time : 2019722
Channel : 13	Period : 33333		OnTime : 28333	Start_Time : 2019722
Channel : 14	Period : 25000		OnTime : 22500	Start_Time : 2019722
Channel : 15	Period : 20000		OnTime : 19000	Start_Time : 2019722
SimpleTimer (ms): 2000, us : 12115022, Dus : 10095303
PWM Channel : 0, programmed Period (uS): 1000000, actual (uS) : 1000000, programmed DutyCycle : 5, actual : 5.00
PWM Channel : 1, programmed Period (uS): 500000, actual (uS) : 500003, programmed DutyCycle : 10, actual : 10.00
PWM Channel : 2, programmed Period (uS): 333333, actual (uS) : 333339, programmed DutyCycle : 20, actual : 20.00
PWM Channel : 3, programmed Period (uS): 250000, actual (uS) : 250005, programmed DutyCycle : 30, actual : 30.00
PWM Channel : 4, programmed Period (uS): 200000, actual (uS) : 200007, programmed DutyCycle : 40, actual : 40.00
PWM Channel : 5, programmed Period (uS): 166666, actual (uS) : 166680, programmed DutyCycle : 45, actual : 44.99
PWM Channel : 6, programmed Period (uS): 142857, actual (uS) : 142858, programmed DutyCycle : 50, actual : 49.99
PWM Channel : 7, programmed Period (uS): 125000, actual (uS) : 124991, programmed DutyCycle : 55, actual : 54.99
PWM Channel : 8, programmed Period (uS): 111111, actual (uS) : 111121, programmed DutyCycle : 60, actual : 59.99
PWM Channel : 9, programmed Period (uS): 100000, actual (uS) : 99988, programmed DutyCycle : 65, actual : 65.01
PWM Channel : 10, programmed Period (uS): 66666, actual (uS) : 66680, programmed DutyCycle : 70, actual : 69.98
PWM Channel : 11, programmed Period (uS): 50000, actual (uS) : 50020, programmed DutyCycle : 75, actual : 74.97
PWM Channel : 12, programmed Period (uS): 40000, actual (uS) : 40001, programmed DutyCycle : 80, actual : 80.00
PWM Channel : 13, programmed Period (uS): 33333, actual (uS) : 33340, programmed DutyCycle : 85, actual : 84.94
PWM Channel : 14, programmed Period (uS): 25000, actual (uS) : 24999, programmed DutyCycle : 90, actual : 90.00
PWM Channel : 15, programmed Period (uS): 20000, actual (uS) : 20020, programmed DutyCycle : 95, actual : 94.91
SimpleTimer (ms): 2000, us : 22275008, Dus : 10159986
PWM Channel : 0, programmed Period (uS): 1000000, actual (uS) : 1000000, programmed DutyCycle : 5, actual : 5.00
PWM Channel : 1, programmed Period (uS): 500000, actual (uS) : 500003, programmed DutyCycle : 10, actual : 10.00
PWM Channel : 2, programmed Period (uS): 333333, actual (uS) : 333339, programmed DutyCycle : 20, actual : 20.00
PWM Channel : 3, programmed Period (uS): 250000, actual (uS) : 249995, programmed DutyCycle : 30, actual : 30.00
PWM Channel : 4, programmed Period (uS): 200000, actual (uS) : 199993, programmed DutyCycle : 40, actual : 40.00
PWM Channel : 5, programmed Period (uS): 166666, actual (uS) : 166680, programmed DutyCycle : 45, actual : 44.99
PWM Channel : 6, programmed Period (uS): 142857, actual (uS) : 142860, programmed DutyCycle : 50, actual : 49.99
PWM Channel : 7, programmed Period (uS): 125000, actual (uS) : 125002, programmed DutyCycle : 55, actual : 54.99
PWM Channel : 8, programmed Period (uS): 111111, actual (uS) : 111120, programmed DutyCycle : 60, actual : 59.99
PWM Channel : 9, programmed Period (uS): 100000, actual (uS) : 99999, programmed DutyCycle : 65, actual : 65.00
PWM Channel : 10, programmed Period (uS): 66666, actual (uS) : 66680, programmed DutyCycle : 70, actual : 69.98
PWM Channel : 11, programmed Period (uS): 50000, actual (uS) : 50000, programmed DutyCycle : 75, actual : 75.00
PWM Channel : 12, programmed Period (uS): 40000, actual (uS) : 39997, programmed DutyCycle : 80, actual : 80.00
PWM Channel : 13, programmed Period (uS): 33333, actual (uS) : 33340, programmed DutyCycle : 85, actual : 84.94
PWM Channel : 14, programmed Period (uS): 25000, actual (uS) : 25000, programmed DutyCycle : 90, actual : 90.00
PWM Channel : 15, programmed Period (uS): 20000, actual (uS) : 20000, programmed DutyCycle : 95, actual : 95.00

4. ISR_16_PWMs_Array_Complex on BLUEPILL_F103CB

The following is the sample terminal output when running example ISR_16_PWMs_Array_Complex on BLUEPILL_F103CB to demonstrate how to use multiple PWM channels with complex callback functions, the accuracy of ISR Hardware PWM-channels, especially when system is very busy. The ISR PWM-channels is running exactly according to corresponding programmed periods and duty-cycles

Starting ISR_16_PWMs_Array_Complex on BLUEPILL_F103CB
STM32_SLOW_PWM v1.2.3
[PWM] STM32TimerInterrupt: Timer Input Freq (Hz) = 72000000
[PWM] Frequency = 1000000.00 , _count = 20
Starting ITimer OK, micros() = 3390333
Channel : 0	Period : 1000000		OnTime : 50000	Start_Time : 3390427
Channel : 1	Period : 500000		OnTime : 50000	Start_Time : 3390427
Channel : 2	Period : 333333		OnTime : 66666	Start_Time : 3390427
Channel : 3	Period : 250000		OnTime : 75000	Start_Time : 3390427
Channel : 4	Period : 200000		OnTime : 80000	Start_Time : 3390427
Channel : 5	Period : 166666		OnTime : 74999	Start_Time : 3390427
Channel : 6	Period : 142857		OnTime : 71428	Start_Time : 3390427
Channel : 7	Period : 125000		OnTime : 68750	Start_Time : 3390427
Channel : 8	Period : 111111		OnTime : 66666	Start_Time : 3390427
Channel : 9	Period : 100000		OnTime : 65000	Start_Time : 3390427
Channel : 10	Period : 66666		OnTime : 46666	Start_Time : 3390427
Channel : 11	Period : 50000		OnTime : 37500	Start_Time : 3390427
Channel : 12	Period : 40000		OnTime : 32000	Start_Time : 3390427
Channel : 13	Period : 33333		OnTime : 28333	Start_Time : 3390427
Channel : 14	Period : 25000		OnTime : 22500	Start_Time : 3390427
Channel : 15	Period : 20000		OnTime : 19000	Start_Time : 3390427
SimpleTimer (ms): 2000, us : 13397013, Dus : 10006588
PWM Channel : 0, programmed Period (uS): 1000000, actual (uS) : 1000000, programmed DutyCycle : 5, actual : 5.00
PWM Channel : 1, programmed Period (uS): 500000, actual (uS) : 500003, programmed DutyCycle : 10, actual : 10.00
PWM Channel : 2, programmed Period (uS): 333333, actual (uS) : 333342, programmed DutyCycle : 20, actual : 20.00
PWM Channel : 3, programmed Period (uS): 250000, actual (uS) : 250006, programmed DutyCycle : 30, actual : 30.00
PWM Channel : 4, programmed Period (uS): 200000, actual (uS) : 199999, programmed DutyCycle : 40, actual : 40.00
PWM Channel : 5, programmed Period (uS): 166666, actual (uS) : 166679, programmed DutyCycle : 45, actual : 44.99
PWM Channel : 6, programmed Period (uS): 142857, actual (uS) : 142865, programmed DutyCycle : 50, actual : 49.99
PWM Channel : 7, programmed Period (uS): 125000, actual (uS) : 125000, programmed DutyCycle : 55, actual : 54.99
PWM Channel : 8, programmed Period (uS): 111111, actual (uS) : 111121, programmed DutyCycle : 60, actual : 59.99
PWM Channel : 9, programmed Period (uS): 100000, actual (uS) : 100003, programmed DutyCycle : 65, actual : 65.00
PWM Channel : 10, programmed Period (uS): 66666, actual (uS) : 66678, programmed DutyCycle : 70, actual : 69.98
PWM Channel : 11, programmed Period (uS): 50000, actual (uS) : 50006, programmed DutyCycle : 75, actual : 74.99
PWM Channel : 12, programmed Period (uS): 40000, actual (uS) : 40008, programmed DutyCycle : 80, actual : 79.99
PWM Channel : 13, programmed Period (uS): 33333, actual (uS) : 33338, programmed DutyCycle : 85, actual : 84.95
PWM Channel : 14, programmed Period (uS): 25000, actual (uS) : 25011, programmed DutyCycle : 90, actual : 89.96
PWM Channel : 15, programmed Period (uS): 20000, actual (uS) : 19984, programmed DutyCycle : 95, actual : 94.91
SimpleTimer (ms): 2000, us : 23412013, Dus : 10015000
PWM Channel : 0, programmed Period (uS): 1000000, actual (uS) : 1000000, programmed DutyCycle : 5, actual : 5.00
PWM Channel : 1, programmed Period (uS): 500000, actual (uS) : 500003, programmed DutyCycle : 10, actual : 10.00
PWM Channel : 2, programmed Period (uS): 333333, actual (uS) : 333342, programmed DutyCycle : 20, actual : 20.00
PWM Channel : 3, programmed Period (uS): 250000, actual (uS) : 250005, programmed DutyCycle : 30, actual : 30.00
PWM Channel : 4, programmed Period (uS): 200000, actual (uS) : 199999, programmed DutyCycle : 40, actual : 40.00
PWM Channel : 5, programmed Period (uS): 166666, actual (uS) : 166679, programmed DutyCycle : 45, actual : 44.99
PWM Channel : 6, programmed Period (uS): 142857, actual (uS) : 142865, programmed DutyCycle : 50, actual : 49.99
PWM Channel : 7, programmed Period (uS): 125000, actual (uS) : 125020, programmed DutyCycle : 55, actual : 54.98
PWM Channel : 8, programmed Period (uS): 111111, actual (uS) : 111121, programmed DutyCycle : 60, actual : 59.99
PWM Channel : 9, programmed Period (uS): 100000, actual (uS) : 100023, programmed DutyCycle : 65, actual : 64.99
PWM Channel : 10, programmed Period (uS): 66666, actual (uS) : 66678, programmed DutyCycle : 70, actual : 69.98
PWM Channel : 11, programmed Period (uS): 50000, actual (uS) : 50025, programmed DutyCycle : 75, actual : 74.96
PWM Channel : 12, programmed Period (uS): 40000, actual (uS) : 40028, programmed DutyCycle : 80, actual : 79.90
PWM Channel : 13, programmed Period (uS): 33333, actual (uS) : 33338, programmed DutyCycle : 85, actual : 84.97
PWM Channel : 14, programmed Period (uS): 25000, actual (uS) : 24988, programmed DutyCycle : 90, actual : 90.03
PWM Channel : 15, programmed Period (uS): 20000, actual (uS) : 19984, programmed DutyCycle : 95, actual : 95.00

5. ISR_Modify_PWM on NUCLEO_F767ZI

The following is the sample terminal output when running example ISR_Modify_PWM on NUCLEO_F767ZI to demonstrate how to modify PWM settings on-the-fly without deleting the PWM channel

Starting ISR_Modify_PWM on NUCLEO_F767ZI
STM32_SLOW_PWM v1.2.3
[PWM] STM32TimerInterrupt: Timer Input Freq (Hz) = 216000000 , Timer Clock Frequency = 1000000.00
[PWM] Timer Frequency = 50000.00 , _count = 20
Starting ITimer OK, micros() = 2016546
Using PWM Freq = 200.00, PWM DutyCycle = 1.00
Channel : 0	    Period : 5000		OnTime : 50	Start_Time : 2022139
Channel : 0	    Period : 10000		OnTime : 555	Start_Time : 12027668
Channel : 0	    Period : 5000		OnTime : 50	Start_Time : 22022668
Channel : 0	    Period : 10000		OnTime : 555	Start_Time : 32027668
Channel : 0	    Period : 5000		OnTime : 50	Start_Time : 42022668
Channel : 0	    Period : 10000		OnTime : 555	Start_Time : 52027668
Channel : 0	    Period : 5000		OnTime : 50	Start_Time : 62032668
Channel : 0	    Period : 10000		OnTime : 555	Start_Time : 72032668
Channel : 0	    Period : 5000		OnTime : 50	Start_Time : 82027668
Channel : 0	    Period : 10000		OnTime : 555	Start_Time : 92032668
Channel : 0	    Period : 5000		OnTime : 50	Start_Time : 102027668
Channel : 0	    Period : 10000		OnTime : 555	Start_Time : 112037668
Channel : 0	    Period : 5000		OnTime : 50	Start_Time : 122032668
Channel : 0	    Period : 10000		OnTime : 555	Start_Time : 132037668
Channel : 0	    Period : 5000		OnTime : 50	Start_Time : 142032668

6. ISR_Changing_PWM on NUCLEO_F767ZI

The following is the sample terminal output when running example ISR_Changing_PWM on NUCLEO_F767ZI to demonstrate how to modify PWM settings on-the-fly by deleting the PWM channel and reinit the PWM channel

Starting ISR_Changing_PWM on NUCLEO_F767ZI
STM32_SLOW_PWM v1.2.3
[PWM] STM32TimerInterrupt: Timer Input Freq (Hz) = 216000000 , Timer Clock Frequency = 1000000.00
[PWM] Timer Frequency = 50000.00 , _count = 20
Starting ITimer OK, micros() = 2016548
Using PWM Freq = 1.00, PWM DutyCycle = 50.00
Channel : 0	    Period : 1000000		OnTime : 500000	Start_Time : 2022140
Using PWM Freq = 2.00, PWM DutyCycle = 90.00
Channel : 0	    Period : 500000		OnTime : 450000	Start_Time : 12027037
Using PWM Freq = 1.00, PWM DutyCycle = 50.00
Channel : 0	    Period : 1000000		OnTime : 500000	Start_Time : 22032037
Using PWM Freq = 2.00, PWM DutyCycle = 90.00
Channel : 0	    Period : 500000		OnTime : 450000	Start_Time : 32038037


Debug

Debug is enabled by default on Serial.

You can also change the debugging level _PWM_LOGLEVEL_ from 0 to 4

// Don't define _PWM_LOGLEVEL_ > 0. Only for special ISR debugging only. Can hang the system.
#define _PWM_LOGLEVEL_     0

Troubleshooting

If you get compilation errors, more often than not, you may need to install a newer version of the core for Arduino boards.

Sometimes, the library will only work if you update the board core to the latest version because I am using newly added functions.



Issues

Submit issues to: STM32_Slow_PWM issues


TO DO

  1. Search for bug and improvement.
  2. Similar features for remaining Arduino boards

DONE

  1. Basic hardware multi-channel PWM for STM32F/L/H/G/WB/MP1 boards such as NUCLEO_H743ZI2, NUCLEO_L552ZE_Q, NUCLEO_F767ZI, BLUEPILL_F103CB, etc., using Arduino Core for STM32
  2. Add Table of Contents
  3. Add functions to modify PWM settings on-the-fly
  4. Fix multiple-definitions linker error. Drop src_cpp and src_h directories
  5. Add example multiFileProject to demo for multiple-file project
  6. Improve accuracy by using float, instead of uint32_t for dutycycle
  7. Optimize library code by using reference-passing instead of value-passing
  8. Fix reattachInterrupt() bug. Check bugfix: reattachInterrupt() pass wrong frequency value to setFrequency() #19
  9. DutyCycle to be optionally updated at the end current PWM period instead of immediately.
  10. Display informational warning only when _PWM_LOGLEVEL_ > 3


Contributions and Thanks

Many thanks for everyone for bug reporting, new feature suggesting, testing and contributing to the development of this library.


Contributing

If you want to contribute to this project:

  • Report bugs and errors
  • Ask for enhancements
  • Create issues and pull requests
  • Tell other people about this library

License

  • The library is licensed under MIT

Copyright

Copyright (c) 2021- Khoi Hoang

About

This library enables you to use Hardware Timers on STM32F/L/H/G/WB/MP1 boards to create and output PWM to pins. The most important feature is they're purely hardware-based PWM channels. Therefore, their executions are not blocked by bad-behaving functions or tasks. This important feature is absolutely necessary for mission-critical tasks. These …

Topics

Resources

License

Stars

Watchers

Forks

Packages

No packages published