Skip to content
forked from ps2/rileylink

Sub-1 GHz to BLE bridge hardware and firmware

License

Notifications You must be signed in to change notification settings

kboghdady/rileylink

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

RileyLink

project chat

A custom designed Bluetooth Smart (BLE) to Sub-1 GHz module. It can be used to bridge any BLE capable smartphone to the world of Sub-1 GHz devices.

Setup

  • There is a FAQ covering some questions about installing the firmware.
  • @loudnate recorded a setup log of his experience.

Hardware

See the hardware directory for design files to build a RileyLink. The hardware design is released under Creative Commons Share-alike 3.0. This board has small parts and will need to be reflow soldered; using a solder-paste stencil is recommended.

RileyLink Hardware

Order a Pre-Assembed RileyLink

From time-to-time community members do a production run of pre-assembled RileyLink Boards. When they are available you can place an order here GetRileyLink

Firmware

The code in the firmware directory runs on the RileyLink hardware. There are two main chips on the RileyLink, and thus two firmware images.

LED Lights

There are blue and green leds near both chips. The ble113 is on the upper right of the board, and the cc1110 is in the lower middle.

Blue for the ble113 indicates there are packets received and ready for a phone to pick up. Green means the phone is connected to the ble113.

On the cc1110, I blue is a timer based on/off, letting you know the firmware code is running. Green is toggled when a packet comes in.

The other red LED indicates charging.

License

The MIT License (MIT)

Copyright (c) 2015 Pete Schwamb

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

About

Sub-1 GHz to BLE bridge hardware and firmware

Resources

License

Stars

Watchers

Forks

Packages

No packages published