Major target: use todo-txt.cli to manage your big plan(Ubuntu)

Minor target: learn shell and linux, same time use emacs org-mode to manage your small plan.

The thing actullay classified into three parts:

.bashrc(cygwin,maybe .bash_profile also needed) destination: path the todo.sh, complete function for todo.sh, configure todo.sh, let you can use t
.todo.actions.d destination: some add ons for todo.sh, such as mit,mitf,view,again etc , let you can use t mitf ....
todo-txt.cli-2... destination: todo.txt live in the folder, todo.cfg also. todo.sh is the main source, the kernal of the todo-txt.cli Important ! let you can use todo.sh, it is the home of todo.txt-cli.

If you can finish the three parts above, you can use the todo-txt-cli now also add-ons functions.

Use Todo.txt to manage your life job

Todo.txt

开源的计划管理工具，支持多种编程语言的开发

Todo.txt add on

cygwin制作linux环境，需要把bash文件dos2unix.exe转换文件，否则出现故障。

安装插件方法

可以参考我的todo add on 仓库注意在ubuntuhu环境下得设置

PATH=$PATH:/Todo/
alias t='todo.sh -d /Todo/todo.cfg'
set TODO_ACTIONS_DIR="/home/yezhaoliang/.todo.actions.d" not ~/.todo.actions.d
let plugin be executable , chmod +x .

t graph
t mit t mit 日期任务信息：日期包含着具体的日子[today,mon,tue,wed,thr,fri,sat,2017.05.05]、月份[jan,feb]、季度[q1,q2,q3,q4]、年[2017,2018]等信息【日度】【月度】【季度】【年度】计划的指定工具 t mit 可以查看【四度】计划表，相当于计划汇总表 t mit @f708 显示所有地点在f708的计划表，四度都会显示出来，但是速度慢一些 t mit not @f708 显示不在f708的计划表[可惜的是，还无法支持地点分层] t mit rm和t mit mv类似于 t rm和t mv.'

quarter bug

如果使用case老是匹配不上，只能用if判断了。


  currentQuarter=`date +%-m`
  if [[ $currentQuarter -eq 1 || $currentQuarter -eq 2 || $currentQuarter -eq 3 ]] ; then
      THISQUARTER=`date +%Y0101`
  elif  [[ $currentQuarter -eq 4 || $currentQuarter -eq 5 || $currentQuarter -eq 6 ]] ; then
      THISQUARTER=`date +%Y0401`
  elif  [[ $currentQuarter -eq 7 || $currentQuarter -eq 8 || $currentQuarter -eq 9 ]] ; then
      THISQUARTER=`date +%Y0701`
  elif  [[ $currentQuarter -eq 10 || $currentQuarter -eq 11 || $currentQuarter -eq 12 ]] ; then
      THISQUARTER=`date +%Y1001`
  fi
#  echo "Ye: $THISQUARTER "
  # case `date +%-m` in
  #   [1-3] )
  #     THISQUARTER=`date +%Y0101`
  #     ;;
  #   [4-6] )
  #     THISQUARTER=`date +%Y0401`
  #     ;;
  #   [7-9] )
  #     THISQUARTER=`date +%Y0701`
  #     ;;
  #   [10-12] )
  #     THISQUARTER=`date +%Y1001`
  #     ;;
  #     *)
  #    THISQUARTER=20170101
  #    ;;
  # esac
  # echo "Inside processMITS: $THISQUARTER"
  #

t mitf 1d 带时间段的定义task t mitf 1w "... @f708 +multiAxis " t mitf 1m "... @f708 +multiAxis" t mitf 1d "... @f708 +multiAxis"
```
 context and project information must be in the end of line
```

t top t view t edit top显示头20天信息。

 view比较好用
 一般用t view project 显示【项目分层】的计划表，t view context显示【地点相关分层】的计划表，由于时间相关的
 任务得在每条任务中添加t:2017-05-03的标签，所以t view date,t view today ,t view tomorrow,t view future,
 t view past等时间相关的任务在任务中没有t:开头的时间标签都认为是无效，得手动进行添加了,This is shortage,希望改进。

 为此改进如下：只要添加t:2017-05-03日期规范即可，于是写了如下【简单】脚本【简单又复杂2h】【注意dos2unix.exe】

【addView.sh】用于t view date和t due，经过这个修改【t due只需要修改due.py的due为t和4改为2，想看t due插件】即可, t again也是用着类似于t due的思路，也得对应修改due 为t。

【addView.sh和deletView.sh】都是用于【修改todo.txt】的小工具。

#count=1;
for quartern in `grep -no "[^ :]*{[^ ]\+}" todo.txt|tr "." "-"|awk -F"[{-}]" '{printf("%s%s\n",$1,$2)}'`;do 
    item=`echo $quartern|cut -d ":" -f1`
    quarter=`echo $quartern|cut -d ":" -f2`
    date1=`echo $quarter|sed 's/\(.*\)00-00/\101-01/'|
    sed 's/\(.*\)[qQ]1-00/\101-01/'|
    sed 's/\(.*\)[qQ]2-00/\104-01/'|
    sed 's/\(.*\)[qQ]3-00/\107-01/'|
    sed 's/\(.*\)[qQ]4-00/\110-01/'|
    awk -F"-" '{if($3==00) printf("%s%s%s%s%s\n","t:",$1,"-",$2,"-01"); else printf("%s%s%s%s%s%s\n","t:",$1,"-",$2,"-",$3)}'`
#    echo ${item}
#    echo $date1
    todo.sh append ${item} $date1
#    echo ${count} 
#    echo ${date1} 
#    count=$((count+1));

done

修正到期日子，这样配合t due ,t view date,t again更好一些。

    date1=`echo $quarter|sed 's/\(.*\)00-00/\101-01/'|
    sed 's/\(.*\)[qQ]1-00/\101-01/'|
    sed 's/\(.*\)[qQ]2-00/\104-01/'|
    sed 's/\(.*\)[qQ]3-00/\107-01/'|
    sed 's/\(.*\)[qQ]4-00/\110-01/'|

【思路】：

抓取todo.txt的行号和时间信息，目标结合mit的时间，所以是大括号里头的时间，得到对应行号和时间信息
获取行号，可以提供给todo.sh append中的$item选项，即计划好，对应todo.txt的行号
获取时间，并进行特殊日期处理，比如年、季度、月份的处理
最后调用todo.sh append即可，刚好在对应任务插入一行字符串，perfect解决

因为重复上述脚本，会不断增加t:日期，于是又写了一个【删除】脚本【保存为deleteView.sh】

sed -ie "s/t:.*$//g" todo.txt

注意得修改deleteView.sh,用于配套t note套件。

sed -ie 's/t:.*\s*//g' todo.txt

update deleteView.sh, because of the bug there are note:zo0.md after t:2018-05-28 -Ei ,rather than -iE, -iE not working! but -Ei works!

sed  -Ei 's/t:[0-9]{4}-[0-9]{2}-[0-9]{2}//g' todo.txt

删除todo.txt目录下的该文件，从t:开始到行尾都删除掉。增删就都完成了，这样就可以使用t view date, t view tomorrow, t view today , t view past ,t view future, t view nodate等。

https://raw.githubusercontent.com/jueqingsizhe66尝试访问本地图片 没用！
改为： https://raw.github.com/jueqingsizhe66尝试访问本地图片 有用！
github内部机制,似乎无效
https://github.com/jueqingsizhe66/Todo/blob/master/finalResult2.png
有效了

t xp 更好显示【已完成】任务 t xp -o 10 显示10天内完成的任务
t birdseye t birdseye: 生成产量报告,完成量和未完成量的统计 A Python script birdseye.py (called with the birdseye action) analyzes the todo.txt and done.txt files to generate a report of completed and incomplete items in every context and project. (Requires Python and both birdseye.py and birdseye files to run.)
t sync

同步，需要t commit,算了不用这个了,手动提交。

t revive

t revive查找done.txt,然后显示出来完成的任务，t revive #item表示完成done.txt的记录号，一把就是行号。但是这个不会修改日期，只是删除x+日期而已。

但是自从有了again插件之后，发现这个插件有点鸡肋。但是突然想到了一个思路，有时候你会想着恢复done.txt，这样你就可以配合上addView,这样修改的日期就会不断的朝前，并且也不会说不断的增加done的数据，只保留最新的一个版本。maybe a little complex. 但是，后来我查了一下，t revive并不会删掉done的数据。

$ t revive
1 x 2017-05-02 due:2017-05-01 @f708 +graduate info the Huang to check the report
2 x 2017-05-02 due:2017-05-02 @jpw +jr dpme
3 x 2017-05-03 {2017.05.03} @F708 +graduate call WangNanMan to do report
5 x 2017-05-04 {2017.05.04} @f708 +graduate talk with WangNanMan to add an interface to my Project  t:2017-05-04
4 x 2017-05-04 {2017.05.04} @Subway +multiAxis read the paper about the wind turbine yaw  t:2017-05-04
6 x 2017-05-04 {2017.05.04} transact a check for the DELL @NCEPU +lab t:2017-05-04
--
DONE: 6 of 6 tasks shown

$ t revive 6
26 {2017.05.04} transact a check for the DELL @NCEPU +lab t:2017-05-04
TODO: 26 added.

t again

完成某个任务，并且重复再做，或者推迟几天再做。

为了配合上mit又得类似于due插件做一个小调整，把due tag换成t tag 一般得配合上t view today或者t list 亦或者t due 3 ,t due 1等使用

# Replace any due date (due:DATE) of the item in $LINE by $ADJUST
function replace_due_date()
{
  #TAG=due
  TAG=t
  replace_tagged_date
}

测试例子

$ t again 26 +1
26 x 2017-05-04 {2017.05.04} transact a check for the DELL @NCEPU +lab t:2017-05-04
TODO: 26 marked as done.
x 2017-05-04 {2017.05.04} transact a check for the DELL @NCEPU +lab t:2017-05-04
TODO: /cygdrive/d/Todo/todo.txt_cli-2.9/todo.txt archived.
26 {2017.05.04} tr

注意:

t again 26 1表示增加一天的期限【这个命令我经常会用，开心，拖上一天再干】
t again 26 +1 表示增加2天的期限
t again 26 +2 表示增加3天的期限，依次类推

官网的例子：

$ date +%F
2015-11-12

$ todo.sh list
1 learn something new
2 change bathroom towels due:2015-11-15
3 deposit paycheck due:2015-11-15
4 replace smoke alarm batteries due:2015-10-20
5 pay rent due:2015-12-03
6 send flowers to Mom for her birthday due:2016-01-14 again:+1y

$ todo.sh again 1
1 x 2015-11-12 learn something new
TODO: 1 marked as done.
7 learn something new
TODO: 7 added.

$ todo.sh again 2 14
2 x 2015-11-12 change bathroom towels due:2015-11-15
TODO: 2 marked as done.
8 change bathroom towels due:2015-11-26
TODO: 8 added.

$ todo.sh again 3 +14
3 x 2015-11-12 deposit paycheck due:2015-11-15
TODO: 3 marked as done.
9 deposit paycheck due:2015-11-29
TODO: 9 added.

$ todo.sh again 4 1y
4 x 2015-11-12 replace smoke alarm batteries due:2015-10-20
TODO: 4 marked as done.
10 replace smoke alarm batteries due:2016-11-12
TODO: 10 added.

$ todo.sh again 5 +1m
5 x 2015-11-12 pay rent due:2015-12-03
TODO: 5 marked as done.
11 pay rent due:2016-01-03
TODO: 11 added.

$ todo.sh again 6
6 x 2015-11-12 send flowers to Mom for her birthday due:2016-01-14 again:+1y
TODO: 6 marked as done.
12 send flowers to Mom for her birthday due:2017-01-14 again:+1y
TODO: 12 added.

again插件调整天星期月年的高级命令

t chcon

特别小的插件，用于调整context 计划的地点，类似的思路调整项目，但是一般没有必要。

t note

除非真的想要添加笔记，一般I don't wanna添加的，t again , t mit, t due, t lately, t view用的好好的，不整这么复杂的。

t note add taskID 
t note show taskID
t note edit taskID

after archived, use  t note show a

Because of TODO_NOTE_EXT and EDITOR , so you write note with vim by the md extension of file

【add】约定是在每个任务后面加上一个note:任意文件名.md 该文件名存储在todo.txt文件的目录下. 按照原理每个任务如果添上note会有一个文件名，通过名字对应。
【done】另外当一个task完成后，会创建一个archive*.md文件，也就是在done.txt的时候，查看只能通过t note show a #item 或者t note edit a #item ;a代表着archive的意思
【delete】理论上删除一个task，也会删除对应的note.md

注意得修改deleteView.sh:

sed -ie 's/t:.*\s*//g' todo.txt

需要额外在todo.cfg配置全局环境

# for the note
# Note file extension
export TODO_NOTE_EXT=.md
export EDITOR=vim

安装说明：

Installation

Copy the archive, del and rm files in this directory to your add-ons folder. Be aware that this add-on overrides the archive, del and rm commands. If you already have overriden some of them, you'll need to do some tweaking to combine both versions.

得替换掉默认的t archive生成一个bak文件，和t rm和t del,否则无法配合done的时候，完成笔记的关联关系。目的是构成一个笔记系统。这样，如果完成一个done之后，就会删掉对应的*.md文件【已确认，的确是删除了】，并存放到archive.md文件，可以通过t note a 查看archive.md的日记信息。

就这样构成了，添加note，note和待完成计划的关系，以及计划完成之后，依然保留note的方式(也就是archive.md中)。【note简易系统】

官网简单使用说明,一般都是配合上t ls,t view today ,t due ,t due 3等使用

$ t note add 27
27 {2017.05.04} transact a check for the DELL @NCEPU +lab t:2017-05-04 note:gby.md
TODO: Note added to task 27.
Edit note?  (y/n)
y

$ t note show 27
test it# {2017.05.04} transact a check for the DELL @NCEPU +lab t:2017-05-04

$ t note show a
test it# {2017.05.04} transact a check for the DELL @NCEPU +lab t:2017-05-04

t due

【注意：】关于due.py 只需要修改due.py的re.search的due改为t,并且把针对于due的4改为2即可。

        for i, task in enumerate(content):
            #match = re.search(r'due:\d{4}-\d{2}-\d{2}', task)
            match = re.search(r't:\d{4}-\d{2}-\d{2}', task)

            if match is not None:
                #date = datetime.strptime(match.group()[4:], '%Y-%m-%d').date()
                date = datetime.strptime(match.group()[2:], '%Y-%m-%d').date()

Todo.txt vim plugin

用vim来修改你的todo.txt文件，挺方便的,通过bundle安装一下，不需要再.vimrc修改其他东西。

Sorting tasks:
 <localleader>s  Sort the file
 <localleader>s+  Sort the file on +Projects
 <localleader>s@  Sort the file on @Contexts
 <localleader>sd  Sort the file on dates
 <localleader>sdd  Sort the file on due dates

Edit priority:
 <localleader>j  Decrease the priority of the current line
 <localleader>k  Increase the priority of the current line
 <localleader>a  Add the priority (A) to the current line
 <localleader>b  Add the priority (B) to the current line
 <localleader>c  Add the priority (C) to the current line

Date:
 <localleader>d  Set current task's creation date to the current date
 date<tab>  (Insert mode) Insert the current date

Mark as done:
 <localleader>x  Mark current task as done
 <localleader>X  Mark all tasks as done
 <localleader>D  Move completed tasks to done.txt

The video about Todo.txt

todo原始命令的使用

注意事先得对t进行alias，并执行todo的命令补全功能shell,具体官网看说明

t add @f708 +multiAxis finish paper 表示添加一个t add命令表示添加一个命令 @后面跟着【地点】 +后面跟着【项目名】，之后的都叫做任务信息(task info)
t list 或者t ls,表示【列出】todo.txt内容的所有【任务】
t listall 把已完成和未完成的任务通通显示出来，并在报告的结尾做一个【简短的报告】，well done.
t p 18 B 表示给任务号为18的【添加】一个B的【权限】(权限按照字母表A-Z都可以)，可以通过t list显示所有任务信息，然后通过t lsp显示所有的带权限的任务。相反地，t depri 或者t dp表示【去除】相应任务的【权限】
t lsprj 表示【显示】任务中涉及到的【项目】(注意区分显示带权限的任务),也可以写作t listproj,类似的t lsc表示显示项目中所有涉及到地址(即@打头的),也可以写作t listcon
t rm 1

$ t rm 1
Delete '(A) due:2017.05.02  @home do some job'?  (y/n)

显示是否【删除】一个task no 的【任务】。类似于t del 1。

t do 1 完成任务1，并把该条语句信息【包含完成时间】提交到done.txt中
t report 生成一个report.txt,然后把对应日期里面的【未完成】的计划数、【已完成】的计划数写在后面两位
t 单单一个t会显示所有的项目名字和地址名字
t listfile 或者t lf列出所有todo.txt目录相关的文件

Files in the todo.txt directory:
done.txt
hey.txt
report.txt
todo.txt

t archive 定期可以做一个【归档】,会把todo.txt done.txt中的空行去除，生成.bak文件
t prepend 1 "hello" 或者t prep 1 hello，引号可以省略，表示在一个任务号前面添加信息

$ t prep 1 fuck
1 fuck due:2017.05.02  @home do some job

相反地，t append 1 "fuck" 或者t app 1 fuck表示在任务1的末尾添加fuck字段。

.bashrc的相应配置

核心的功能就是【todo.sh】

#one thing: load todo.txt-cli
PATH=$PATH:"/cygdrive/d/Todo/todo.txt_cli-2.9"
alias t='todo.sh -d /cygdrive/d/Todo/todo.txt_cli-2.9/todo.cfg'
export TODOTXT_DEFAULT_ACTION=ls

#2nd thing: todo completion
source /cygdrive/d/Todo/todo.txt_cli-2.9/todo_completion
complete -F _todo t

#3rd thing: mit completion
source /cygdrive/d/Todo/todo.txt_cli-2.9/todo2.sh
complete -F _todotxtcli t

alias cdtodo='cd /cygdrive/d/Todo/todo.txt_cli-2.9'

Ubuntu version

you need to configure the Path, t etc, you also need to complete the commands for t.

PATH=$PATH:"~/TodoXshell/todo.txt_cli-3.9"
alias t='todo.sh -d ~/TodoXshell/todo.txt_cli-2.9/todo.cfg'
export TODOTXT_DEFAULT_ACTION=ls
source ~/TodoXshell/todo.txt_cli-2.9/todo_completion
complete -F _todo t

source ~/TodoXshell/todo.txt_cli-2.9/todo2.sh
complete -F _todotxtcli t

alias cdtodo="cd ~/TodoXshell/todo.txt_cli-2.9"

alias .="cd ../"
alias ..="cd ../../"
alias ...="cd ../../.."

todo2.sh参考Mit, the same with ubuntu, don't need to be modified.

# todo-txt completion
_todotxtcli() {
  local cur="${COMP_WORDS[COMP_CWORD]}"
  local pre="${COMP_WORDS[COMP_CWORD-1]}"
  local cst="${COMP_WORDS[COMP_CWORD-2]}_${COMP_WORDS[COMP_CWORD-1]}"
#  echo "start--->"
#  echo $cur
#  echo $pre
#  echo $cst
#  echo "end-->"
  case $pre in
    mit )
      COMPREPLY=( $(compgen -W "today tomorrow monday tuesday wednesday thursday friday saturday sunday january february march april may june july august september october november december" -- $cur) )
      ;;
    * )
      if [[ $cst =~ ^mv_[0-9]+$ ]]; then
        COMPREPLY=( $(compgen -W "today tomorrow monday tuesday wednesday thursday friday saturday sunday january february march april may june july august september october november december" -- $cur) )
      else
        COMPREPLY=( $(compgen -W "mit `eval todo.sh lsprj` `eval todo.sh lsc`" -- $cur) )
      fi
      ;;
  esac
#  echo $COMPREPLY
}
complete -F _todotxtcli t

User manual

git credential

git config --global credential.helper store

Name		Name	Last commit message	Last commit date
Latest commit History 7 Commits
todo.txt_cli-2.9		todo.txt_cli-2.9
.gitignore		.gitignore
README.md		README.md

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

todo.txt_cli-2.9

todo.txt_cli-2.9

.gitignore

.gitignore

README.md

README.md

Repository files navigation

Major target: use todo-txt.cli to manage your big plan(Ubuntu)

Use Todo.txt to manage your life job

Todo.txt

Todo.txt add on

Todo.txt vim plugin

The video about Todo.txt

todo原始命令的使用

.bashrc的相应配置

Ubuntu version

git credential

About

Releases

Packages

Languages

jueqingsizhe66/TodoXshell

Folders and files

Latest commit

History

Repository files navigation

Major target: use todo-txt.cli to manage your big plan(Ubuntu)

Use Todo.txt to manage your life job

.bashrc的相应配置

Ubuntu version

git credential

About

Topics

Resources

Stars

Watchers

Forks

Languages