Skip to content

islamyakin/coraza-proxy-wasm

 
 

Repository files navigation

Coraza Proxy WASM

Web Application Firewall WASM filter built on top of Coraza and implementing the proxy-wasm ABI. It can be loaded directly from Envoy or also used as an Istio plugin.

Getting started

go run mage.go -l lists all the available commands:

▶ go run mage.go -l
Targets:
  build*             builds the Coraza wasm plugin.
  check              runs lint and tests.
  coverage           runs tests with coverage and race detector enabled.
  doc                runs godoc, access at http://localhost:6060
  e2e                runs e2e tests with a built plugin against the example deployment.
  format             formats code in this repository.
  ftw                runs ftw tests with a built plugin and Envoy.
  lint               verifies code quality.
  runExample         spins up the test environment, access at http://localhost:8080.
  teardownExample    tears down the test environment.
  test               runs all unit tests.

* default target

Building requirements

Building the filter requires:

Up to date required versions can be found looking at minGoVersion and tinygoMinorVersion variables.

Building the filter

go run mage.go build

You will find the WASM plugin under ./build/main.wasm.

Multiphase

By default, coraza-proxy-wasm runs with multiphase evaluation enabled (See coraza.rule.multiphase_evaluation build tag). It enables the evaluation of rule variables in the phases that they are ready for, potentially anticipating the phase the rule is defined for. This feature suits coraza-proxy-wasm, and specifically Envoy request lifecycle, aiming to inspect data that has been received so far as soon as possible. It leads to enforce actions the earliest possible, avoiding WAF bypasses. This functionality, in conjunction with the early blocking CRS feature, permits to effectively raise the anomaly score and eventually drop the request at the earliest possible phase.

If you want to disable it, set the MULTIPHASE_EVAL environment variable to false before building the filter.

Running the filter in an Envoy process

In order to run the coraza-proxy-wasm we need to spin up an envoy configuration including this as the filter config

    ...

    filter_chains:
    - filters:
        - name: envoy.filters.network.http_connection_manager
            typed_config:
            "@type": type.googleapis.com/envoy.extensions.filters.network.http_connection_manager.v3.HttpConnectionManager
            stat_prefix: ingress_http
            codec_type: auto
            route_config:
                ...
            http_filters:
                - name: envoy.filters.http.wasm
                typed_config:
                    "@type": type.googleapis.com/envoy.extensions.filters.http.wasm.v3.Wasm
                    config:
                    name: "coraza-filter"
                    root_id: ""
                    configuration:
                        "@type": "type.googleapis.com/google.protobuf.StringValue"
                        value: |
                        {
                            "directives_map": {
                                "default": [
                                    "SecDebugLogLevel 9",
                                    "SecRuleEngine On",
                                    "SecRule REQUEST_URI \"@streq /admin\" \"id:101,phase:1,t:lowercase,deny\""
                                ]
                            },
                            "default_directives": "default"
                        }
                    vm_config:
                        runtime: "envoy.wasm.runtime.v8"
                        vm_id: "coraza-filter_vm_id"
                        code:
                        local:
                            filename: "build/main.wasm"

Using CRS

Core Rule Set comes embedded in the extension, in order to use it in the config, you just need to include it directly in the rules:

Loading entire coreruleset:

configuration:
    "@type": "type.googleapis.com/google.protobuf.StringValue"
    value: |
    {
        "directives_map": {
            "default": [
                "Include @demo-conf",
                "SecDebugLogLevel 9",
                "SecRuleEngine On",
                "Include @crs-setup-demo-conf",
                "Include @owasp_crs/*.conf"
            ]
        },
        "default_directives": "default"
    }

Loading some pieces:

configuration:
    "@type": "type.googleapis.com/google.protobuf.StringValue"
    value: |
    {
        "directives_map": {
            "default": [
                "Include @demo-conf",
                "SecDebugLogLevel 9",
                "SecRuleEngine On",
                "Include @crs-setup-demo-conf",
                "Include @owasp_crs/REQUEST-901-INITIALIZATION.conf"
            ]
        },
        "default_directives": "default"
    }

Recommendations using CRS with proxy-wasm

  • In order to mitigate as much as possible malicious requests (or connections open) sent upstream, it is recommended to keep the CRS Early Blocking feature enabled (SecAction 900120).

Running go-ftw (CRS Regression tests)

The following command runs the go-ftw test suite against the filter with the CRS fully loaded.

go run mage.go ftw

Take a look at its config file ftw.yml for details about tests currently excluded.

One can also run a single test by executing:

FTW_INCLUDE=920410 go run mage.go ftw

Example: Spinning up the coraza-wasm-filter for manual tests

Once the filter is built, via the commands mage runExample, mage reloadExample, and mage teardownExample you can spin up, test, and tear down the test environment. Envoy with the coraza-wasm filter will be reachable at localhost:8080. The filter is configured with the CRS loaded working in Anomaly Scoring mode. For details and locally tweaking the configuration refer to @demo-conf and @crs-setup-demo-conf. In order to monitor envoy logs while performing requests you can run:

  • Envoy logs: docker-compose -f ./example/docker-compose.yml logs -f envoy-logs.
  • Critical wasm (audit) logs: docker-compose -f ./example/docker-compose.yml logs -f wasm-logs

Manual requests

Run ./e2e/e2e-example.sh in order to run the following requests against the just set up test environment, otherwise manually execute and tweak them to grasp the behaviour of the filter:

# True positive requests:
# Custom rule phase 1
curl -I 'http://localhost:8080/admin'
# Custom rule phase 2
curl -i -X POST 'http://localhost:8080/anything' --data "maliciouspayload"
# Custom rule phase 3
curl -I 'http://localhost:8080/status/406'
# Custom rule phase 4
curl -i -X POST 'http://localhost:8080/anything' --data "responsebodycode"
# XSS phase 1
curl -I 'http://localhost:8080/anything?arg=<script>alert(0)</script>'
# SQLI phase 2 (reading the body request)
curl -i -X POST 'http://localhost:8080/anything' --data "1%27%20ORDER%20BY%203--%2B"
# Triggers a CRS scanner detection rule (913100)
curl -I --user-agent "Grabber/0.1 (X11; U; Linux i686; en-US; rv:1.7)" -H "Host: localhost" -H "Accept: text/xml,application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5" localhost:8080

# True negative requests:
# A GET request with a harmless argument
curl -I 'http://localhost:8080/anything?arg=arg_1'
# A payload (reading the body request)
curl -i -X POST 'http://localhost:8080/anything' --data "This is a payload"
# An harmless response body
curl -i -X POST 'http://localhost:8080/anything' --data "Hello world"
# An usual user-agent
curl -I --user-agent "Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/105.0.0.0 Safari/537.36" localhost:8080

WAF Metrics

Metrics are exposed in the prometheus format under localhost:8082 (admin cluster in the envoy config).

curl -s localhost:8082/stats/prometheus | grep waf_filter

and we get the metrics with the corresponding tags:

# TYPE waf_filter_tx_interruptions counter
waf_filter_tx_interruptions{phase="http_request_headers_identifier",rule_id="101",identifier="global",owner="coraza"} 1
waf_filter_tx_interruptions{phase="http_request_body_identifier",rule_id="102",identifier="global",owner="coraza"} 1
waf_filter_tx_interruptions{phase="http_response_headers_identifier",rule_id="103",identifier="global",owner="coraza"} 1
waf_filter_tx_interruptions{phase="http_response_body_identifier",rule_id="104",identifier="global",owner="coraza"} 1
waf_filter_tx_interruptions{phase="http_request_body_identifier",rule_id="949110",identifier="global",owner="coraza"} 1
waf_filter_tx_interruptions{phase="http_response_headers_identifier",rule_id="949110",identifier="global",owner="coraza"} 1
waf_filter_tx_interruptions{phase="http_request_headers_identifier",rule_id="949111",identifier="global",owner="coraza"} 1
# TYPE waf_filter_tx_total counter
waf_filter_tx_total{} 11

About

proxy-wasm filter based on Coraza WAF

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • Go 92.7%
  • Shell 6.6%
  • Dockerfile 0.7%