Device Tree Overlay is a mechanism that enables dynamic loading/unloading of a new device tree blob on top of the kernel device tree. Device Tree Overlay was first introduced in Linux Kernel version 3.19.
Linux Kernel Version 4.4.4, the latest at the time of writing (2016-04-04), supports device tree overlay, but the mechanism can only be accessible from the kernel space. A certain interface is need, when using device tree overlay from the userspace.
For example, "Transactional Device Tree & Overlays" describes an interface using ConfigFS, but this has not been merged to the upstream at the time of writing (2016-04-04).
Therefore, dtbocfg, which stands for Device Tree Blob Overlay Configuration File System, was developed
to serve as a userspace API of Device Tree Overlay. Though this is a prototypical project, you can experiment
with Device Tree Overlay by using dtbocfg.
In some forked kernels such as linux-xlnx, the "ConfigFS overlay interface" is available, and provides
an interface to overlay Device Tree Blob from the userspace via ConfigFS. If you use linux-xlnx or any
other kernel that includes the "ConfigFS overlay interface", one may want to use this mechanism instead
of dtbocfg, by turning it on by CONFIG_OF_CONFIGFS=y in the config.
For details of the "ConfigFS overlay interface", please refer configfs-overlays.txt.
This project is confirmed to work with Linux Kernel version 4.4.4.
When building a kernel, Device-Tree-Overlay option should be enabled.
You can enable the option via make menu_config ---> Device Drivers ---> Device Tree and Open Firmware support
---> Device Tree overlays, or by manually addting CONFIG_OF_OVERLAY=y in .config.
Clone the git repository, and run make after modifying it according to your environment.
shell% git clone https://github.com/ikwzm/dtbocfg.git
shell% cd dtbocfg
shell% makeAfter booting Linux on the target system, load the above-compiled device driver by doing like:
shell# insmod dtbocfg.ko
[ 1458.894102] dtbocfg_module_init
[ 1458.897231] dtbocfg_module_init: OKIf ConfigFS is not mounted yet, do so by doing like:
shell# mount -t configfs none /configIf /config/device-tree/overlays is created, it is ready to use dtbocfg.
shell# ls -la /config/device-tree/overlays/
drwxr-xr-x 2 root root 0 4 4 18:54 .
drwxr-xr-x 3 root root 0 4 4 18:54 ..
shell#The following snippet shows an example Device Tree Source that adds uio entity.
Note: the register address, the interrupt number are just randomly picked in the snippet, and therefore you cannot actually access the created device.
/dts-v1/;
/ {
fragment@0 {
target-path = "/amba";
__overlay__ {
#address-cells = <0x1>;
#size-cells = <0x1>;
uio0@43c10000 {
compatible = "generic-uio";
reg = <0x43c10000 0x1000>;
interrupts = <0x0 0x1d 0x4>;
};
};
};
};
To place a device tree blob overlay, make a directory under /config/device-tree/overlays.
The name of the directory actually does not matter, but in this example, a directory named
uio0, which corresponds to the entry in the Device Tree Source, is created.
shell# mkdir /config/device-tree/overlays/uio0
Subsequently, entries named status and dtbo will be automatically created under
/config/device-tree/overlays/uio0. Although these look like standalone files, the are
actually kernel attirubutes exposed by dtbocfg.
shell# ls -la /config/device-tree/overlays/uio0/
drwxr-xr-x 2 root root 0 4 4 20:08 .
drwxr-xr-x 3 root root 0 4 4 20:08 ..
-rw-r--r-- 1 root root 4096 4 4 20:09 dtbo
-rw-r--r-- 1 root root 4096 4 4 20:09 status
Write a Device Tree Blob to /config/device-tree/overlays/uio0/dtbo.
shell# dtc -I dts -O dtb -o uio0.dtbo uio0.dts
shell# cp uio0.dtbo /config/device-tree/overlays/uio0/dtbo
The Device Tree Blob written to dtbo can be enabled and added to the main (kernel) Device Tree by
writing 1 to /config/device-tree/overlays/uio0/status.
If the blob is successfully added to the kernel Device Tree, /dev/uio0 will be created, as decalred
in the blob.
shell# echo 1 > /config/device-tree/overlays/uio0/status
shell# ls -la /dev/uio*
crw------- 1 root root 247, 0 4 4 20:17 /dev/uio0
The added Device Tree Blob can be removed from the kernel Device Tree by writing 0 to
/config/device-tree/overlays/uio0/status.
shell# echo 0 > /config/device-tree/overlays/uio0/status
The same can be achieved by removing /config/device-tree/overlays/uio0 too.
shell# rmdir /config/device-tree/overlays/uio0
This is another overlaying exmple involving udmabuf.
For details about udmabuf, see https://github.com/ikwzm/udmabuf.
A Device Tree Source like below should be prepared:
/dts-v1/;
/ {
fragment@0 {
target-path = "/amba";
__overlay__ {
udmabuf4 {
compatible = "ikwzm,udmabuf-0.10.a";
minor-number = <4>;
size = <0x00400000>;
};
};
};
};
To place a device tree blob overlay, make a directory under /config/device-tree/overlays.
Again, the name of the directory actually does not matter, and in this example, a directory named
udmabuf4 is created.
shell# mkdir /config/device-tree/overlays/udmabuf4
Load the udmabuf device driver if not automatically loaded up on boot.
shell# insmod udmabuf.ko
A compiled Device Tree Blob should be written to /config/device-tree/overlays/udmabuf4/dtbo.
In this example, an output from Device Tree Compiler (dtc) is directly written to dtbo.
shell# dtc -I dts -O dtb -o /config/device-tree/overlays/udmabuf4/dtbo udmabuf4.dts
Similarly to the above example, the Device Tree Blob can be added to the kernel Device Tree by
writing 1 to /config/device-tree/overlays/udmabuf4/status.
If the udmabuf device driver is already loaded, /dev/udmabuf4 will be created as declared in
the Device Tree Blob.
shell# echo 1 > /config/device-tree/overlays/udmabuf4/status
[ 7256.806725] udmabuf amba:udmabuf4: driver probe start.
[ 7256.827450] udmabuf udmabuf4: driver installed
[ 7256.831818] udmabuf udmabuf4: major number = 246
[ 7256.836631] udmabuf udmabuf4: minor number = 4
[ 7256.841192] udmabuf udmabuf4: phys address = 0x1f500000
[ 7256.846604] udmabuf udmabuf4: buffer size = 4194304
[ 7256.851694] udmabuf amba:udmabuf4: driver installed.
shell# ls -la /dev/udmabuf*
crw------- 1 root root 247, 0 4 4 20:30 /dev/udmabuf4
The added Device Tree Blob can be removed by writing 0 to
/config/device-tree/overlays/udmabuf4/status.
shell# echo 0 > /config/device-tree/overlays/udmabuf4/status
[ 7440.383899] udmabuf udmabuf4: driver uninstalled
[ 7440.389533] udmabuf amba:udmabuf4: driver unloaded
Removing the /config/device-tree/overlays/udmabuf4 directory would also do the same.
shell# rmdir /config/device-tree/overlays/udmabuf4/
[ 7473.117564] udmabuf udmabuf4: driver uninstalled
[ 7473.123364] udmabuf amba:udmabuf4: driver unloaded
