Skip to content

Releases: hyperion-project/hyperion.ng

Hyperion 2.0.16

18 Jan 16:11
Compare
Choose a tag to compare

The release has been in the works for almost 12 months covering bug fixes and it includes a good number of new features/improvements.

You can get the executables from GitHub or even better via our official repositories for Debian, Ubuntu and Fedora (new).
All latest versions are supported (Bookworm, Mantic Minotaur, Fedora 39), as well as the upcoming ones (Trixie, Noble Numbat, Fedora 40).

Installation/update instructions, as well as even an easy one command way you find in the comprehensive instructions page, just select the way you would like to go for.

Added

  • New languages: Hebrew, Indonesian, Ukrainian

Event Services

  • Newly introduced Event Service configuration and consistent handling across all components
  • Suspend/Resume & Screen Locking support for MacOS
  • Allow to enable/disable suspend & lock on operating system events (#1633, #1632)
  • Scheduled events allowing to suspend,resume, etc. (#1088)
  • Configurable CEC event handling
LED-Devices

Philips Hue

  • APIv2 support, incl. full https security and certificate validation
  • Multi-Segment device support, e.g. Gradient light
  • Use Entertainment area device location for Hyperion layout in addition to manual locations
  • Option to layout by focussing on full- or only center of entertainment area
  • Wizard supports multiple Hue-Bridge discovery
  • Support of DIYHue specifics. DIYHue bridge's name must start with "DIYHue"
  • Backward compatibility for bridges not supporting APIv2 and/or Entertainment API
    Note: The wizard will configure an APIv2 capable bridge always with Entertainment to ensure the best experience.

Nanoleaf

  • Wizard to generate user authorization token allowing users to configure the device via a single window
  • Generation of a default layout per device's configuration, including orientation
  • Lines support

Changed

  • Updated misleading error messages in case Hyperion is not able to support the suspend/lock feature (#1622)
  • Restart Serial Device, if write error occurred
  • ws281x - Update logic to identify is user is admin and disable device configuration if not (#1621)
  • Hide Hyperion from the Dock on macOS, as all features can be accessed from the menubar - Thanks @Rastafabisch

Fixed

  • Correctly display local language characters in log, e.g. Umlauts
  • Fixed that Audio Capture is enabled after reboot automatically (#1581)
  • Fixed that Audio Capture is not shown when there is no screen nor video grabber
  • Audio Capture settings are no longer ignored (#1630)
  • Fixed that the Matrix effect finds its image - Thanks @lsellens
  • MDNSBrower - Fixed, if timeout while resolving host occurs
  • Non image updates ignored blacklisted LEDs (#1634)
  • Fixed that Windows OsEvents failed in non-GUI mode (#1671)
  • Addressed serious (#1425) and some smaller memory leaks
LED-Devices

WLED

  • Fixed UI handling, if segment streaming is not supported

Nanoleaf

  • "Panel numbering sequence" was not configurable any longer
  • Number of panels increased during retries (#1643)

Removed

LED-Devices

Philips Hue

  • "Switch Off On Black" for APIv2, as the original bridge will switch off LEDs itself.
  • "Candy Gamma" for APIv2, as the bridge maps the RGB values best per device.

Nanoleaf

  • Removed "Start Position" in favour of the general Blacklist feature provided

Technical

  • Changed default build from Stretch to Buster
  • Support Qt 6.7, Update to Protobuf 25.1, Update mbedTLS to v3.4.0, Update flatbuffers to v23.5.26
  • Use C++17 standard as default
  • Added Pull Request (PR) installation script, allowing users to test development builds savely on Linux
  • Fixed missing include limits in QJsonSchemaChecker - Thanks @Portisch
  • Fixed dependencies for deb packages in Debian Bookworm (#1579) - Thanks @hg42, @Psirus
  • Fixed git version identification when run in docker and local code
  • Address cmake deprecation warnings, cmake 3.5 is required at minimum now
  • Address some build warnings
  • Removed UniqueConnections from Lambdas, as not supported

Hyperion 2.0.15

19 Feb 18:46
24a00e3
Compare
Choose a tag to compare

Hyperion's February release provides you with the latest updates and fixes.
Key new features: You can now stream to a dedicated WLED segment, put Hyperion in Suspend or Idle mode or apply dominant color rather than mean color processing.

Many thanks to @EliteScientist who contributed with an audio grabber which works as the other existing grabbers,
i.e. you can use the input feeding multiple instances in parallel or forward the input.

Added

  • Audio Grabber to add audio visualization support for both Windows and Linux.
  • Support streaming to individual WLED segments (requires WLED 0.13.3+).
    To allow segment streaming, enable "Realtime - Use main segment only" in WLED's Sync Interfaces setup screen
  • Allow to keep WLED powered on after streaming and restoring state
  • Allow to Disable / Enable all instances (#970) by
    • Suspend/Resume support for Linux and Windows (#1493,#1282, #978).
      Suspend/Resume/Restart is supported via API, UI, Systray and hyperion-remote
    • Idle scenario via Screen Locking (Linux/Windows), Screensaver invokation (Linux), hyperion-remote or API
      In Idle, all instances, components will be disabled besides the output processing (LED-Devices, smoothing).
      The current priorities will be cleared and the background effect per instance will be executed, if enabled.
    • Commands toogleSuspend and toggleIdle allow to flip between modes, e.g. might be used to trigger modes by a remote
  • Reduced pixel processing to reduce resources on big assignment areas
  • Support for squared mean color processing
  • Support for dominant color processing on assigned LED areas (#1382). A simple and advanced way is provided. Advanced and high accuracy might be combined with reduced pixel processing to lower CPU usage.
  • Add instance# in API response (#1504)

Changed

  • Renamed LED area assignment naming to provide clarity on the processing algorithms
  • REST API: Increased default timeout to address "Operation cancelled" errors
  • LED Devices: Allow to differentiate between recoverable/unrecoverable errors

Fixed

  • Effects/Smoothing: Effects with dedicated smoothing settings will now run with those settings (even if general smoothing is off)
  • No interim color update at WLED after streaming and turning off WLED
  • LED-Matrix Layout: Add Cabling direction selection element again (#1566)
  • Restart correctly, if running as service (#1368)
  • Hue-Wizard: In case auto discovery failed, port 80 was not used as default (#1544)
  • Send only one reply per Start Instance request (#1551)
  • Add instance# in JSON-API replies (aligning to Add instance in websocket response to a subscription #1504 behaviour)
  • hyperion-remote: Extracting reply for a configGet request correctly (#1555)
  • Grabber fps setting was not applied correctly
  • Smoothing: No empty updates

Technical

  • Add CodeQL for GitHub code scanning
  • Update to Protocol Buffers 3.21.12
  • Update to Mbed TLS 3.3.0
  • Qt6 alignments
  • cmake support of libcec without version in lib-name
  • Refactor for Python 3.11 deprecated functions

Hyperion 2.0.14

27 Nov 17:32
Compare
Choose a tag to compare

Hyperion's November release is not too big, but provides you with the latest updates and fixes.
Many thanks to all contributors providing code (@xkns, @drzony ) or translations.

Added

  • New color processing settings: Saturation gain and brightness/value gain.
    They allow compensating washed out HDR colors on LEDs (#822, #1092, #1142 partially).
  • New languages: Catalan & Greek
  • USB Capture: Support 3D processing for MJPEG
  • Forwarding: Support flat-/proto buffer input
  • Adalight: HyperSerial support (High speed protocol by awawa-dev) and
    support device feedback, show statistics provided by HyperSerial (modified by Lord-Grey) sketch
  • AtmoOrb: Firmware image for Particle/Photon

Changed

  • Serial LED-devices: Ability to select standard Baud rates, as well as defining a custom one
  • LED-devices: Do not switch-off device, if background effect is configured and will kick-in soon

Fixed

  • USB-Grabber: Fixed a SEGFAULT when compiled on Ubuntu Server 22.04
  • USB Grabber: Fixed memory leak when transforming MJPEG
  • ImageResampler: Apply only half crop for 3D to maintain crop ratio
  • Remote Control: Update Color calibration values when calibration settings were saved
  • Fixed Smoothing got out of sync when saving configuration
  • Smoothing: Removed "outputrate" as duplicate to update frequency
  • Queue LED-device on/off signals
  • UI: Correctly lookup current Instance Name
  • Fixed AtmoOrb firmware image

Hyperion 2.0.13

22 May 11:36
5dc696b
Compare
Choose a tag to compare

Added

  • Allow to build a "light" version of Hyperion, i.e. no grabbers, or services like flat-/proto buffers, boblight, CEC
  • Allow to restart Hyperion via Systray
  • mDNS support for all platforms inkl. Windows (#740)
  • Forwarder: mDNS discovery support and ease of configuration of other Hyperion instances
  • Grabber: mDNS discovery for standalone grabbers
  • Grabber: Dynamic loading of the Dispmanx Grabber (#1418)
  • Flatbuffer/Protobuf are now able to receive RGBA data
  • Added the instance number as part of the logline (#910). In the UI Log the instance is presented as a readable name.
  • New language: Japanese
LED-Devices
  • Support retry attempts enabling devices, e.g. to open devices after network or a device itself got available (#1302). Fixes that devices got "stuck", if initial open failed e.g. for WLED, Hue
  • New UDP-DDP (Distributed Display Protocol) device to overcome the 490 LEDs limitation of UDP-RAW
  • mDNS discovery support and ease of configuration (Cololight, Nanoleaf, Philips-Hue, WLED, Yeelight); removes the need to configure IP-Address, as address is resolved automatically.
  • Allow to disable switching LEDs on during startup (#1390)
  • Support additional Yeelight models
  • Show warning, if get properties failed (Network devices: indication that network device is not reachable)
  • LED Layout Classic: Support keystone correction via draggable corner LEDs
  • LED Layout Matrix: Support vertical cabling direction (#1420)

Changed

  • Color Smoothing is started in pause mode to save resources, when Hyperion starts with no active source
  • Boblight: Support multiple Boblight clients with different priorities
  • UI: LED Preview has been given a touch of Ambilight.
  • UI: Allow configuration of a Boblight server per LED-instance
  • UI: LED Layout - Removed limitations on indention
  • UI: Log output and LED preview window can be maximized
  • mDNS Publisher: Aligned Hyperion mDNS names to general conventions and simplified naming
LED-Devices
  • Refactored Philips Hue wizard and LED-Device
  • WLED's default streaming protocol is now UDP-DDP. More than 490 LEDs are supported now (requires minimum WLED 0.11.0). UDP-RAW is still supported in parallel (via expert settings).
  • Present all serial/TTY devices during discovery in expert mode; no filtering on existing vendor-identifier (Adalight serial USB does not show up in GUI #1458)

Fixed

  • UI: Ensure all configuration and system info response are there before reloading the page (#1430)
  • UI: Show all previous log lines in the Log UI (was only working for Debug before)
  • UI: Remote control: Treat duration=0 as endless
  • UI: Stop Web-Browser capture when user triggers other activities
  • Effects: Fix image URL in Matrix effect
  • Effects: Fix that start effect is stuck on UI
  • Effects: Fixed that effect specific smoothing setup was not applied when effect is started from available- or effects under configuration
  • Qt-Grabber: Fixed position handling of multiple monitors (#1320, #1403)
  • Standalone grabbers: Improved fps help/error text, fixed default address and port, fixed auto discovery of Hyperion server in hyperion-remote
  • hyperion-remote: Show image filename in UI for images sent
  • Reworked PriorityMuxer and Subscriptions
  • PriorityMuxer: Fix crash when running fore- and background effect in parallel during start-up
  • Update Priority, if first LED changes for COLOR update (to reflect color correctly in UI)
  • Start JSON and WebServer only, if Hyperion's instance 0 is available
  • Treat http headers case insensitive (RFC 2616)
  • Fixed: Signal detection does not switch off all instances (#1281)
  • Do not kill application on SIGILL-signal (#1435)
  • Fixed Qt version override, e.g. set via QTDIR
  • Update jsonschema and checkschema to allow checking hyperion.config.json.default on Windows
LED-Devices
  • Fixes that the Led-Device output flow was interrupted, by an enabling API request on an already enabled device (#967)
  • Yeelight - Workaround: Ignore error when setting music mode = off, but the music-mode is already off (#1372)
  • Fixed: Hue Entertainment mode does not resume after no signal (#930)

Removed

  • UI: Removed sessions (of other Hyperions)
  • Replaced existing AVAHI/Bonjour code by QMdnsEngine

Hyperion 2.0.12

21 Nov 18:38
Compare
Choose a tag to compare

Hyperion's November release brings you some new features, removed IPv6 address related limitations, as well as fixing a couple of issues.

Hyperion packages can be installed now under Ubuntu (x64/armhf/arm64) and Debian (x64/armhf/arm64) (incl. Raspberry Pi OS) via our own APT server.
Details about the installation can be found in the installation.md and at apt.hyperion-project.org.

We strongly recommend doing an export of your configuration before migrating to the new version!
You cannot use the new version's configuration database with a previous version.
If you run multiple instances, you unfortunately need to export each individually.

Added

  • New LED-device type: Razor Chroma.
    Note: Due to Chroma Razer API limitations, only one device can be configured.
  • APA102 - Support setting maximum brightness level (1-31)
  • New installation method (Drag'n Drop) for macOS.
  • hyperion-remote & standalone grabbers: IPv6 support
  • New languages: Danish & Hungarian

Changed

  • LED-Devices: Removed IPv6 limitations
  • Philips-Hue Wizard optimizations
  • JSON/Flatbuffer forwarder: Removed IPv6 limitations
  • Allow to import configurations from previous versions
    Note: Existing configurations are migrated to new structures automatically

Fixed

  • Fixed API Subscription (e.g. as used by HomeAssistant) (#1351)
  • Fixed APA102 protocol aligning to the standard defined, removed Latch-Time as not required by APA102 protocol (#1352, #1132)
  • Fixed hyperion-remote when sending multiple Hex-Colors with "Set Color" option
  • UI: Fixed "Selected Hyperion instance isn't running" issue (#1357)
  • Fixed Database migration version handling
  • Fixed Python ModuleNotFoundError (#1109)

Technical

  • Added Qt6 support
  • Migrated to MBEDTSL 3

Hyperion 2.0.0-alpha.11

06 Oct 07:41
Compare
Choose a tag to compare
Pre-release

The release is primarily fixing issues introduced with alpha 10, but covering other findings too.
Thanks to everybody highlighting real problem areas, as well as to those proactively providing fixes for integration via pull requests.
Besides bug fixing, you will find some smaller enhancements which make everybody’s life easier.

The fact that WS281x devices must run under root caused many headaches before in getting them running.
We did not weaken security, but provide you with an easy to use script to switch the user-id of hyperion going forward. Furthermore, device configuration is blocked, if the environment does not allow it.

Added:

  • Script to change the user Hyperion is executed with.
    To run Hyperion with root privileges (e.g. for WS281x) execute
    sudo updateHyperionUser -u root

  • Gif effects can source Gifs via URLs in addition to local files as input

  • System info screen: Added used config path and "is run under root/admin"

  • LED-Device enhancements

    • WS281x: Ensure that a device cannot be configured via the UI when Hyperion is not run with root privileges
    • Nanoleaf: Support discovering additional Nanoleaf devices, e.g. Shapes
    • Nanoleaf: Ability to restore state when Hyperion stops streaming

      Note: In case previous state was a dynamic/temporary effect, the state cannot be restored
    • Nanoleaf: New Feature: allow to overwrite brightness by Hyperion

Changed:

  • The Systemd/Upstart/System-V-Init service registers Hyperion under the name hyperion instead of hyperiond, as this has caused confusion among users in the past.
  • WLED and UDP-Raw: Limit maximum LEDs number to 490
  • WS281x: Update DMA default as per rpi_ws281x recommendation
  • Smoothing is paused when no input source is available (to save resources)
  • Disable LED update streaming, if LED updates are not required, Sync. Video-Streaming between Layout and Simulation
  • Load configuration of last instance used when loading the UI page, Streamline API requests to avoid unnecessary invocations (#1311)
  • BobLight: Priorities are not limited any longer. BobLight can feed Priorities [2-253], default is still 128 (#1269)
  • Amlogic grabber: Limit grabber to 30fps during discovery
  • Amlogic grabber: Continuous image feed even when paused (to not have LEDs switched off), plus no delay when pausing/unpausing

Fixed:

  • Fixed that Smoothing with "Continuous Updates" disabled does not provides LED updates (#1068, #1240)

  • Fixed Issue Blinking / flickering cursor with QT screen capture on Windows (#1328)

  • Fixed Colour effect priority is not deleted when Colorpicker is open (double click on delete is required)

  • Fixed reuse local SSDP address (#1324)

  • Exclude FB Grabber on Amlogic platform, as FB is included in Amlogic Grabber

  • Escape XSS payload to avoid execution (#1292)

  • Include libqt5sql5-sqlite packaging dependency

  • Fixed embedded Python location (#1109)

  • LED-Devices

    • Fixed Philips Hue wizard (#1276)
    • Fixed AtmoOrb wizard
    • Fixed that Lightpack device does not core when lack of permissions error (LIBUSB_ERROR_ACCESS)
    • Fixed Atmo/Karate LED count constraint handling
    • Fixed Hue, Disable LED general options (HW Led count & RGB Byte order) as calculated
    • Fixed SPI, Tpm2.Net - Memory issues
    • Fixed: Nanoleaf does not turn on
    • Fixed LED layout - Additional parameters for classic layout were not saved (#1314)
    • Fixed Network LED-Device UI: Trigger getProperties for the configured host, when no hosts were discovered

Removed:

  • Smoothing: Removed "Continuous Updates" flag as it is obsolete.
    In case an LED-device requires continuous updates, use the LED-Device's "Rewrite Time" parameter.

Hyperion 2.0.0-alpha.10

18 Jul 09:37
Compare
Choose a tag to compare
Pre-release

The focus of this release is on user experience.
We tried as much as possible supporting you in getting valid setup done, as well as providing enough room for expert users to tweak configurations here and there.
The reworked dashboard provides you now with the ability to control individual components, jump to key configuration items, as well as to switch between LED instances easily.
The refined color coding in the user-interfaces, helps you to quickly identify instance specific and global configuration items.

Of course, the release brings new features (e.g. USB Capture on Windows), as well as minor enhancements and a good number of fixes.

Note:

  • IMPORTANT: Due to the rework of the grabbers, both screen- and video grabbers are disabled after the upgrade to the new version.
    Please, re-enable the grabber of choice via the UI, validate the configuration and save the setup. The grabber should then restart.

  • Hyperion packages can now be installed under Ubuntu (x64) and Debian (amd64/armhf) (incl. Raspberry Pi OS) via our own APT server.
    Details about the installation can be found in the installation.md and at apt.hyperion-project.org.

  • Find here more details on supported platforms and configuration sets

Added

  • The Dashboard is now a one-stop control element to control instances and link into configuration areas
  • LED Instance independent configuration objects (e.g. capturing hardware) are now separated out in the menu
  • New menu item "Sources" per LED instances configuration to enable/disable screen or usb grabber per instance

Grabbers

  • Windows Media Foundation USB grabber (incl. Media Foundation transform/Turbo-JPEG scaling)
  • Linux V4L2 Grabber now supports the following formats: NV12, YUV420
  • Image flipping ability in ImageResampler/Turbo-JPEG
  • UI: Simplified screens for non-expert usage, do only show elements relevant
  • Discover available Grabbers (incl. their capabilities for selection), not supported grabbers are not presented. Note: Screen capturing on Wayland is not supported (given the Wayland security architecture)
  • USB Grabber: New ability to configure hardware controls (brightness, contrast, saturation, hue), as well as populating defaults
  • Configuration item ranges are automatically adopted based on grabber capabilities,
  • Grabbers can only be saved with a valid configuration
  • Standalone grabbers: Added consistent options/capabilities for standalone grabbers, debug logging support
  • Screen grabbers: Allow to set capture frequency, size decimation and cropping across all grabber types
  • Screen grabber: QT-Grabber allows to capture individual displays or all displays in a multi-display setup
  • Display Signal Detection area in preview (expert users)
  • UI: Only show CEC detection, if supported by platform

LED-Devices

  • Select device from list of available devices (UI Optimization - Select device from list of available devices #1053) - Cololight, Nanoleaf, Serial Devices (e.g. Adalight), SPI-Device, Pi-Blaster

  • Get device properties for automatic configuration of number of LEDs and initial layout (WLED, Cololight, Nanoleaf)

  • Identify/Test device (WLED, Cololight, Nanoleaf, Adalight)

  • For selected devices a default layout configuration is created, if the user chooses "Overwrite" (WLED, Cololight, Nanoleaf, all serial devices, all spi device, pi-blaster)

  • Ensure Hardware LED count matches number of lights (Philips Hue, Yeelight, Atmo Orb)

  • User is presented a warning/error, if there is a mismatch between configured LED number and available hardware LEDs

  • Add udev support for Serial-Devices

  • Allow to get properties for Atmo and Karatedevices to limit LED numbers configurable

  • Philips Hue: Add basic support for the Play Gradient Lightstrip

  • WLED: Support of ["live" property] (Aircoookie/WLED#1308) (#1095)

  • WLED: Brightness overwrite control by configuration

  • WLED: Allow to disable WLED synchronization when streaming via hyperion

  • WLED: Support storing/restoring state (#1101)

  • Adalight: Fix LED Num for non analogue output in arduino firmware

  • Allow to blacklist LEDs in layout via UI

  • Live Video image to LedLayout preview (#1136)

Other

  • Effects: Support Custom Effect Templates in UI for custom effect creation and configuration

  • Effects: Custom effect separation in the systray menu

  • New languages - Portuguese (Std/Brazil) & Norwegian (Bokmål)

  • New Flags: Russia, Cameroon, Great Britain, England, Scotland

  • Provide cross compilation on x86_64 for developers using docker. This includes the ability to use local code, as well as build incrementally

Changed

  • Grabbers use now precise timings for better timing accuracy

  • Nanoleaf: Consider Nanoleaf-Shape Controllers

  • LED-Devices: Show HW-Ledcount in all setting levels

  • System Log Screen: Support to copy loglines, system info and status of the current instance to the clipboard (to share it for investigation)

  • Updated dependency rpi_ws281x to latest upstream

  • Fix High CPU load (RPI3B+) (#1013)

Fixed

  • Active grabbers are displayed correctly after updating the WebUI

  • Issue Crop values are checked against decimated resolution (#1160)

  • Framebuffer grabber is deactivated in case of error

  • Fix/no signal detection (#1087)

  • Fix that global settings were not correctly reflected across instances after updates in other non default instance (#1131,#1186,#1188)

  • Fix UI: Handle error scenario properly, when last instance number used does not exist any longer.

  • UI Allow to have password handled by Password-Manager (#1263)

  • Fixed effect freezing during startup

  • Effects were not started from tray (#1199)

  • Interrupt effect on timeout (#1013)

  • Fixed color and effect handling and duplicate priorities (#993,#1113,#1216)

  • Stop background effect, when it gets out of scope (to not use resources unnecessarily)

  • Custom Effect Templates (schemas) are now loaded

  • Effects: Uploaded images were not found executing custom image effects

  • "LED Test" effect description is in wrong order (#1229)

  • LED-Devices: Only consider Hardware LED count (#673)

  • LED-Devices: Correct total packet count in tpm2net implementation (#1127)

  • LED-Hue: Proper black in Entertainment mode if min brightness is set

  • LED-Hue: Minor fix of setColor command

  • Nanoleaf: Fixed behaviour, if external control mode cannot be set

  • System Log Screen: Fixed Auto-Scrolling, Update Look & Feel, Works across multiple Browser tabs/windows, as log stream is not stopped by a new UI

  • Rename Instance and Change Password: Modal did not close

  • Read-Only mode was not handled in the SysInfo function

  • WebSockets: Handling of fragmented frames fixed

  • Fixed libcec dependencies

  • General language and grammar updates

Hyperion 2.0.0-alpha.9

19 Nov 05:30
Compare
Choose a tag to compare
Pre-release

Added

  • Grabber: DirectX9 support (#1039)

  • New blackbar detection mode "Letterbox", that considers only bars at the top and bottom of picture

  • LED-Devices: Cololight support (Cololight Plus & Strip) incl. configuration wizard

  • LED-Devices: SK9822 support (#1005,#1017)

  • UX: New language support: Russian and Chinese (simplified) (#1005)

  • UX: Additional details on Hardware/CPU information (#1045)

  • UX: Systray icons added - Issue #925 (#1040)

  • Read-Only configuration database support

  • Hide Window Systray icon on Hyperion exit & Install DirectX Redistributable

  • Read-Only configuration database support

Changed

  • boblight: reduce cpu time spent on memcopy and parsing rgb values (#1016)
  • Windows Installer/Uninstaller notification when Hyperion is running (#1033)
  • Updated Windows Dependencies
  • Documentation: Optimized images (#1058)
  • UX: Default LED-layout is now one LED only to avoid errors as in #673
  • UX: Change links from http to https (#1067)
  • Change links from http to https (#1067)
  • Cleanup packages.cmake & extend NSIS plugin directory
  • Optimize images (#1058)
  • Docs: Refreshed EN JSON API documentation

Fixed

  • Color calibration for Kodi 18 (#1044)
  • LED-Devices: Karatelight, allow an 8-LED configuration (#1037)
  • LED-Devices: Save Hue light state between sessions (#1014)
  • LED-Devices: LED's retain last state after clearing a source (#1008)
  • LED-Devices: Lightpack issue #1015 (#1049)
  • Fix various JSON API issues (#1036)
  • Fix issue #909, Have ratio correction first and then scale (#1047)
  • Fix display argument in hyperion-qt (#1027)
  • Fix Python reset thread state
  • AVAHI included in Webserver (#996)
  • Fix add libcec to deb/rpm dependency list
  • Fix Hyperion configuration is corrected during start-up, if required
  • Fix color comparison / Signal detection (#1087)

Removed

  • Replace Multi-Lightpack by multi-instance Lightpack configuration (#1049)

Hyperion 2.0.0-alpha.8

14 Sep 22:09
Compare
Choose a tag to compare
Pre-release

Added

  • Add XCB grabber, a faster and safer alternative for X11 grabbing (#912)
  • for Windows: Add binary meta (#932)
  • Differentiate between LED-Device Enable/Disable and Switch On/Off (#960) (Fixes: #828)
  • AtmoOrb discovery and identification support (#988)
  • New AtmoOrb Wizard (#988)
  • Added and updated some language files (#900, #926, #916) (DE, CS, NL, FR, IT, PL, RO, ES, SV, TR, VI)

Changed

  • Improved UDP-Device Error handling (#961)
  • NSIS/Systray option to launch Hyperion on Windows start (HKCU) (#887)
  • Updated some dependencies (#929, #1003, #1004)
  • refactor: Modernize Qt connections (#914)
  • refactor: Resolve some clang warnings (#915)
  • refactor: Several random fixes + Experimental playground (#917)
  • Use query interface for void returning X requests (#945)
  • Move Python related code to Python module (#946)
  • General tidy up (#958)
  • AtmoOrb ESP8266 sketch to support device identification, plus small fix (#988)

Fixed

  • webui: Works now with HTTPS port 443 (#923 with #924)
  • Adalight issue (#903 with #991)
  • Fixed CI: Trigger HyperBian build after release
  • Fixed: -DUSE_SYSTEM_MBEDTLS_LIBS=ON - undefined reference (#898)
  • set zlib back to system ignore list/revert pr #871 (#904)
  • Fixed: logger and led colors (#906)
  • Fixed: some more threading errors (#911)
  • Fix OSX build (#952)
  • AtmoOrb Fix (#988)
  • Return TAN to API requests whenever possible (#1002)

Hyperion 2.0.0-alpha.7

24 Jul 16:50
Compare
Choose a tag to compare
Pre-release

Added

  • HyperBian - A Raspberry Pi OS Lite image with Hyperion pre installed. (#832)
  • An option to reset (delete) the database for the commandline has been added (#820)
  • Improve language selection usability (#812)
  • re-added V4L2 Input method from old Hyperion (#825)
  • Windows: Start Hyperion with a console window hyperiond -c (Or new start menu entry) (#860)
  • Get process IDs by iterating /proc (#843)
  • Dump stack trace on crash (Implement #849) (#870)
  • Minor fixes
  • New Devices (#875)
    • Yeelight support incl. device discovery and setup-wizard
    • WLED as own device and pre-configuration
  • Additional device related capabilities (#875)
    • discover, getProperties, identify, store/restore state and power-on/off available for Philips-Hue, Nanoleaf, Yeelight, partially for Rs232 / USB (Hid)
    • New device capabilities are accessible via JSON-API
    • New REST-API wrapper class in support of network devices, e.g. Philips Hue, Nanoleaf and WLED
    • Flexible ssdp-Discovery incl. RegEx matching and filtering
  • Documentation (#875)
    • Process workflow for LED-Devices
    • Documentation of device classes & methods
    • Code template for new LED-Devices available
  • CEC detection (#877)

Changed

  • Updated dependency rpi_ws281x to latest upstream (#820)
  • Updated websocket-extensions (#826)
  • webui: Suppress default password warning (#830)
  • webui: Add French, Vietnamese and Turkish (#842)
  • Show thread names in GDB for better debugging (#848)
  • CompileHowto.md updated (#864)
  • Updated embedded python package (zip) for Linux (#871)
  • DBManager: ORDER BY parameter added to getRecord(s) (#770)
  • Corrected GitHub Actions badge
  • Fix GitHub Actions/Azure Windows Workflow/Pipeline
  • Updated submodules flatbuffers/rpi_ws281x (#873)
  • LED-Device workflow changed allowing proper suspend/resume & disable/enable scenarios (#875)
  • Network LED-Devices will stop sending packages when disabled (#875)
  • Rs232 Provider fully reworked and changed to synchronous writes (#875)
  • Rs232 configuration via portname and system location (/dev/ style), auto detection is not case-sensitive any longer (#875)
  • Additional error handling depending on device type (#875)
  • Add Windows compatibility incl. moving to Qt functions (#875)
  • Add compatibility for different Qt versions (#875)

Fixed

  • device: Nanoleaf (#829)
  • device: LPD8806 Problems fixed (#829)
  • Possible crash on shutdown (#846). Issue #668
  • Enumerate only V4L2 frame sizes & intervals for framesize type DISCRETE (fix BCM2835 ISP) (#820)
  • Fix systemd registration in debian for RPi4 (#820)
  • Fix missing define in Profiler & added header notes (#820)
  • some Windows compile issues
  • Fix: leaking active effects during quit (#850)
  • Correct path for each build configuration
  • Fix heap corruption (#862)
  • Fix OpenSSL dependencies for Windows (#864)
  • Fix resolution change event (#867)
  • some code improvements & cleanup (#861) (#872) (#880) (#876)
  • some little things, as always (#863)
  • AtmoOrb: Buffer length fix and new configuration validations (#875)
  • Added missing DMX SubTypes to configuration (#875)
  • Fix logger (#885)
    • Make logger thread safe
    • Include timestamp in logs
    • Make logs look a bit more cleaner
  • Decrease compile time (#886)
  • Fix some data synchronization error (#890)
  • Fix Qt screenhot crash (#889)
  • Fix crash on startup if no X server available (#892)
  • Fix RPC restart of Hyperion (#894)