This is an IKEA Trådfri Plugin for the Elgato Stream Deck. This plugin connects your Elgato Stream Deck to your IKEA Trådfri Gateway and lets you control your devices.
- Lights
- Turn ON/OFF or dim your lights
- Blinds
- Adjust your blinds to any position
- Download a release from the release section
- Extract the release
- Place the
no.heinandre.tradfri.sdPluginfolder inside the Stream Deck plugins folder - Fully close and restart the
Stream Deckapplication
- Windows:
%appdata%\Elgato\StreamDeck\Plugins\ - macOS:
~/Library/Application Support/com.elgato.StreamDeck/Plugins/⚠️ NOTE! This plugin has NOT been tested on macOS!
After adding the plugin to the plugin directory you should be able to see the new actions in the list of installed plugins.
Use the Gateway Info action to set up the plugin. There is a detailed instruction in the properties section. You can press the Gateway Info action button on your Stream Deck to open the settings folder.
The following folder should open:
Open the settings.json file.
We need to provide two settings to connect the plugin to your IKEA Trådfri Gateway. The first setting is GatewaySecret which you can find printed at the bottom of your gateway.
The AppName setting is set to SD as default. You can use SD, but keep in mind that you can't reuse the app name.
AppKey you have to specify a different AppName to generate a new AppKey.
Save the settings.json file and press the Gateway Info action button on your Stream Deck (or restart the Stream Deck application) to complete the setup. Give it some time to register the AppName and receive the AppKey.
If the settings are correct, the Gateway Info action button should now show the IP address and the firmware version of your Trådfri Gateway.
ℹ️ You can make a backup of the settings.json file or extract your AppKey from the file at this point if you want to back it up for later.
✅ You may now add other actions to control your devices!
An example showing how to make an action that dims one or more lights to the desired level:
Controlling Blinds work in a very similar way:
This plugin is based on the StreamDeckToolkit Plugin Template by @FritzAndFriends.
More information here:
