macOS on Dell XPS 9350

This repository contains a sample configuration to run macOS (Currently Mojave Sierra 10.14.2) on a Dell XPS 9350

Used Hardware Configuration (Dell XPS 9350)

• Intel i7-6560U
• 8GB RAM
• Sharp SHP144 LQ133Z1 QHD+ (3200x1800) Touchscreen display
• PLEXTOR 512GB SSD (PLEXTOR PX-512M6G-2280) on latest firmware
• Dell DW1820A Wireless (Stock)
  • Wi-Fi device ID [14e4:2100]
  • Bluetooth device ID [0a5c:6412]
• Dell DW1830 Wireless (Alternative)
  • Wi-Fi device ID [14e4:43ba]
  • Bluetooth device ID [0a5c:6410], chipset 20703A1
• Webcam, device ID [05ac:8600]
• RTS525A SD card reader
• BIOS version 1.9.0

Installation

• Clone latest version of this repo: git clone https://github.com/hackintosh-stuff/XPS9350-macOS
• Create a Mojave installer disk (USB or other removable disk).
  • Download Mojave installer and write it to the installer disk (Google how to).
  • Install Clover with UEFI only and UEFI64Drivers to the installer disk just created.
  • Mount EFI partition on the installer disk and replace the original CLOVER folder with the one shipped with this repo (XPS9350-macOS\CLOVER).
• Change BIOS settings to the following
  • Disable Secure Boot
  • Set SATA Operation to AHCI
  • If you have DW1820A WLAN and can't boot with it enabled, disable it temporarily.
• Boot the installer disk and install.
• Boot installed OS and run XPS9350-macOS\post-install.command, follow its guidance until post-installation is done.(If you disabled DW1820A previously, enable "Inject device properties for DW1820A WLAN" option and re-enable DW1820A in bios when reboot)

For a detailed installation description see README_FULL.md

Credits

• XPS 13 9350 setup by syscl
• XPS 13 9360 setup by the-darkvoid
• OS-X-Clover-Laptop-Config (Hot-patching)
• Dell XPS 13 9360 Guide by bozma88
• VoodooI2C on XPS 13 9360 by Vygr10565
• USB-C Hotplug through ExpressCard by dpassmor
• Kext authors mentioned in kexts/kexts.txt