With the power injector you can power the CAN4VSCP bus and also power up to 16 CAN4VSCP modules using the daisy chain connector. This is a perfect companion board to use when you need to connect a number of CAN4VSCP boards in a cabinet and then connect them to thw world.
It also have two 120 ohm terminations that can be activated if needed.
It is also possible to get the module with a resettable fuse that allow a maximum of 500 mA for all modules connected to the board. The fuse will trip at about 800 mA. This can be a good safety precaution for wired networks.
This project is part of the VSCP (Very Simple Control Protocol) project.
This project is licensed under the Creative Commons open source license Attribution-NonCommercial-ShareAlike 3.0 Unported. Other license options are available by conacting Paradis of the Frog AB