Merge tag 'v5.10.184' into 5.10-main

This is the 5.10.184 stable release

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEZH8oZUiU471FcZm+ONu9yGCSaT4FAmSJhFAACgkQONu9yGCS
# aT7GHw//QBnGbyQpmxFSEYJurIj8d+h4lM+O9hPXLiqgOza5eH8vAsqpArRXyKuH
# u8IrAuiziHIokSt+VZ8S3/5G6XLSy4Mq4nfS6dd3QSaszZKPZjPQCaUaob80Q1tj
# KFnJ0xjoWDPclmeG3/HUzD3fQWa4l48yQuFCqEmGDtCZ0LVeT18DgK2Y93TOO6Gh
# iWXV5I0GFpAsyxzNfZu3YYfFUc53R55dP48G0AS4oadCrLkUXAGhbQd8sa3JZFrD
# IL3f2ceb2sCKdtldH1hipJXQhZIfl1BuET7lzO8DmKSJKwTb2Jw2+/vdJMEUUYcq
# qr/FwRBDxbTef6V3zQ29rbdwhZZze2QklNGl+PmsL5b/+sldxN9ENaDLhKw4H+tq
# YXs/TFyhnJ5/5/6+roXoAyeZqqs+hTrus0oCQuh89nTmt81mr528WUqEVxiloAci
# QLDjytABrmOzHh8PGlMtA4QeHv0+wx0iLxEb1cXwMf/CXipBfPm1y/sXDTsMJq84
# MADvuDo+RMlF9FP2O+9iLDNG2uTLJqr/MmSkLr4fIQyIEORQCc9GNz/TZjYAOrnY
# NUVb1kwhcOswZeADPSuZeLTUmZwVf9K6cUK0z07Sval3SHNt2RPqbtEkhTMFtAbM
# W/0fTdyJsUsOg0tTxjwMEqxfrwqqrngoYuh9sZDwDAzs7MYCww0=
# =Mkte
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed Jun 14 11:11:44 2023 CEST
# gpg:                using RSA key 647F28654894E3BD457199BE38DBBDC86092693E
# gpg: Can't check signature: No public key

Makefile

@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 5
 PATCHLEVEL = 10
-SUBLEVEL = 183
+SUBLEVEL = 184
 EXTRAVERSION =
 NAME = Dare mighty things
 

arch/mips/include/asm/atomic.h

@@ -203,7 +203,7 @@ ATOMIC_OPS(atomic64, xor, s64, ^=, xor, lld, scd)
  * The function returns the old value of @v minus @i.
  */
 #define ATOMIC_SIP_OP(pfx, type, op, ll, sc)				\
-static __inline__ int pfx##_sub_if_positive(type i, pfx##_t * v)	\
+static __inline__ type pfx##_sub_if_positive(type i, pfx##_t * v)	\
 {									\
 	type temp, result;						\
 									\

arch/riscv/Kconfig

@@ -22,6 +22,7 @@ config RISCV
 	select ARCH_HAS_GIGANTIC_PAGE
 	select ARCH_HAS_KCOV
 	select ARCH_HAS_MMIOWB
+	select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE
 	select ARCH_HAS_PTE_SPECIAL
 	select ARCH_HAS_SET_DIRECT_MAP
 	select ARCH_HAS_SET_MEMORY

block/blk-iocost.c

@@ -232,7 +232,9 @@ enum {
 
 	/* 1/64k is granular enough and can easily be handled w/ u32 */
 	WEIGHT_ONE		= 1 << 16,
+};
 
+enum {
 	/*
 	 * As vtime is used to calculate the cost of each IO, it needs to
 	 * be fairly high precision.  For example, it should be able to
@@ -256,6 +258,11 @@ enum {
 	VRATE_MIN		= VTIME_PER_USEC * VRATE_MIN_PPM / MILLION,
 	VRATE_CLAMP_ADJ_PCT	= 4,
 
+	/* switch iff the conditions are met for longer than this */
+	AUTOP_CYCLE_NSEC	= 10LLU * NSEC_PER_SEC,
+};
+
+enum {
 	/* if IOs end up waiting for requests, issue less */
 	RQ_WAIT_BUSY_PCT	= 5,
 
@@ -294,9 +301,6 @@ enum {
 	/* don't let cmds which take a very long time pin lagging for too long */
 	MAX_LAGGING_PERIODS	= 10,
 
-	/* switch iff the conditions are met for longer than this */
-	AUTOP_CYCLE_NSEC	= 10LLU * NSEC_PER_SEC,
-
 	/*
 	 * Count IO size in 4k pages.  The 12bit shift helps keeping
 	 * size-proportional components of cost calculation in closer

drivers/ata/ahci.h

@@ -24,6 +24,7 @@
 #include <linux/libata.h>
 #include <linux/phy/phy.h>
 #include <linux/regulator/consumer.h>
+#include <linux/bits.h>
 
 /* Enclosure Management Control */
 #define EM_CTRL_MSG_TYPE              0x000f0000
@@ -54,12 +55,12 @@ enum {
 	AHCI_PORT_PRIV_FBS_DMA_SZ	= AHCI_CMD_SLOT_SZ +
 					  AHCI_CMD_TBL_AR_SZ +
 					  (AHCI_RX_FIS_SZ * 16),
-	AHCI_IRQ_ON_SG		= (1 << 31),
-	AHCI_CMD_ATAPI		= (1 << 5),
-	AHCI_CMD_WRITE		= (1 << 6),
-	AHCI_CMD_PREFETCH	= (1 << 7),
-	AHCI_CMD_RESET		= (1 << 8),
-	AHCI_CMD_CLR_BUSY	= (1 << 10),
+	AHCI_IRQ_ON_SG		= BIT(31),
+	AHCI_CMD_ATAPI		= BIT(5),
+	AHCI_CMD_WRITE		= BIT(6),
+	AHCI_CMD_PREFETCH	= BIT(7),
+	AHCI_CMD_RESET		= BIT(8),
+	AHCI_CMD_CLR_BUSY	= BIT(10),
 
 	RX_FIS_PIO_SETUP	= 0x20,	/* offset of PIO Setup FIS data */
 	RX_FIS_D2H_REG		= 0x40,	/* offset of D2H Register FIS data */
@@ -77,37 +78,37 @@ enum {
 	HOST_CAP2		= 0x24, /* host capabilities, extended */
 
 	/* HOST_CTL bits */
-	HOST_RESET		= (1 << 0),  /* reset controller; self-clear */
-	HOST_IRQ_EN		= (1 << 1),  /* global IRQ enable */
-	HOST_MRSM		= (1 << 2),  /* MSI Revert to Single Message */
-	HOST_AHCI_EN		= (1 << 31), /* AHCI enabled */
+	HOST_RESET		= BIT(0),  /* reset controller; self-clear */
+	HOST_IRQ_EN		= BIT(1),  /* global IRQ enable */
+	HOST_MRSM		= BIT(2),  /* MSI Revert to Single Message */
+	HOST_AHCI_EN		= BIT(31), /* AHCI enabled */
 
 	/* HOST_CAP bits */
-	HOST_CAP_SXS		= (1 << 5),  /* Supports External SATA */
-	HOST_CAP_EMS		= (1 << 6),  /* Enclosure Management support */
-	HOST_CAP_CCC		= (1 << 7),  /* Command Completion Coalescing */
-	HOST_CAP_PART		= (1 << 13), /* Partial state capable */
-	HOST_CAP_SSC		= (1 << 14), /* Slumber state capable */
-	HOST_CAP_PIO_MULTI	= (1 << 15), /* PIO multiple DRQ support */
-	HOST_CAP_FBS		= (1 << 16), /* FIS-based switching support */
-	HOST_CAP_PMP		= (1 << 17), /* Port Multiplier support */
-	HOST_CAP_ONLY		= (1 << 18), /* Supports AHCI mode only */
-	HOST_CAP_CLO		= (1 << 24), /* Command List Override support */
-	HOST_CAP_LED		= (1 << 25), /* Supports activity LED */
-	HOST_CAP_ALPM		= (1 << 26), /* Aggressive Link PM support */
-	HOST_CAP_SSS		= (1 << 27), /* Staggered Spin-up */
-	HOST_CAP_MPS		= (1 << 28), /* Mechanical presence switch */
-	HOST_CAP_SNTF		= (1 << 29), /* SNotification register */
-	HOST_CAP_NCQ		= (1 << 30), /* Native Command Queueing */
-	HOST_CAP_64		= (1 << 31), /* PCI DAC (64-bit DMA) support */
+	HOST_CAP_SXS		= BIT(5),  /* Supports External SATA */
+	HOST_CAP_EMS		= BIT(6),  /* Enclosure Management support */
+	HOST_CAP_CCC		= BIT(7),  /* Command Completion Coalescing */
+	HOST_CAP_PART		= BIT(13), /* Partial state capable */
+	HOST_CAP_SSC		= BIT(14), /* Slumber state capable */
+	HOST_CAP_PIO_MULTI	= BIT(15), /* PIO multiple DRQ support */
+	HOST_CAP_FBS		= BIT(16), /* FIS-based switching support */
+	HOST_CAP_PMP		= BIT(17), /* Port Multiplier support */
+	HOST_CAP_ONLY		= BIT(18), /* Supports AHCI mode only */
+	HOST_CAP_CLO		= BIT(24), /* Command List Override support */
+	HOST_CAP_LED		= BIT(25), /* Supports activity LED */
+	HOST_CAP_ALPM		= BIT(26), /* Aggressive Link PM support */
+	HOST_CAP_SSS		= BIT(27), /* Staggered Spin-up */
+	HOST_CAP_MPS		= BIT(28), /* Mechanical presence switch */
+	HOST_CAP_SNTF		= BIT(29), /* SNotification register */
+	HOST_CAP_NCQ		= BIT(30), /* Native Command Queueing */
+	HOST_CAP_64		= BIT(31), /* PCI DAC (64-bit DMA) support */
 
 	/* HOST_CAP2 bits */
-	HOST_CAP2_BOH		= (1 << 0),  /* BIOS/OS handoff supported */
-	HOST_CAP2_NVMHCI	= (1 << 1),  /* NVMHCI supported */
-	HOST_CAP2_APST		= (1 << 2),  /* Automatic partial to slumber */
-	HOST_CAP2_SDS		= (1 << 3),  /* Support device sleep */
-	HOST_CAP2_SADM		= (1 << 4),  /* Support aggressive DevSlp */
-	HOST_CAP2_DESO		= (1 << 5),  /* DevSlp from slumber only */
+	HOST_CAP2_BOH		= BIT(0),  /* BIOS/OS handoff supported */
+	HOST_CAP2_NVMHCI	= BIT(1),  /* NVMHCI supported */
+	HOST_CAP2_APST		= BIT(2),  /* Automatic partial to slumber */
+	HOST_CAP2_SDS		= BIT(3),  /* Support device sleep */
+	HOST_CAP2_SADM		= BIT(4),  /* Support aggressive DevSlp */
+	HOST_CAP2_DESO		= BIT(5),  /* DevSlp from slumber only */
 
 	/* registers for each SATA port */
 	PORT_LST_ADDR		= 0x00, /* command list DMA addr */
@@ -129,24 +130,24 @@ enum {
 	PORT_DEVSLP		= 0x44, /* device sleep */
 
 	/* PORT_IRQ_{STAT,MASK} bits */
-	PORT_IRQ_COLD_PRES	= (1 << 31), /* cold presence detect */
-	PORT_IRQ_TF_ERR		= (1 << 30), /* task file error */
-	PORT_IRQ_HBUS_ERR	= (1 << 29), /* host bus fatal error */
-	PORT_IRQ_HBUS_DATA_ERR	= (1 << 28), /* host bus data error */
-	PORT_IRQ_IF_ERR		= (1 << 27), /* interface fatal error */
-	PORT_IRQ_IF_NONFATAL	= (1 << 26), /* interface non-fatal error */
-	PORT_IRQ_OVERFLOW	= (1 << 24), /* xfer exhausted available S/G */
-	PORT_IRQ_BAD_PMP	= (1 << 23), /* incorrect port multiplier */
-
-	PORT_IRQ_PHYRDY		= (1 << 22), /* PhyRdy changed */
-	PORT_IRQ_DEV_ILCK	= (1 << 7), /* device interlock */
-	PORT_IRQ_CONNECT	= (1 << 6), /* port connect change status */
-	PORT_IRQ_SG_DONE	= (1 << 5), /* descriptor processed */
-	PORT_IRQ_UNK_FIS	= (1 << 4), /* unknown FIS rx'd */
-	PORT_IRQ_SDB_FIS	= (1 << 3), /* Set Device Bits FIS rx'd */
-	PORT_IRQ_DMAS_FIS	= (1 << 2), /* DMA Setup FIS rx'd */
-	PORT_IRQ_PIOS_FIS	= (1 << 1), /* PIO Setup FIS rx'd */
-	PORT_IRQ_D2H_REG_FIS	= (1 << 0), /* D2H Register FIS rx'd */
+	PORT_IRQ_COLD_PRES	= BIT(31), /* cold presence detect */
+	PORT_IRQ_TF_ERR		= BIT(30), /* task file error */
+	PORT_IRQ_HBUS_ERR	= BIT(29), /* host bus fatal error */
+	PORT_IRQ_HBUS_DATA_ERR	= BIT(28), /* host bus data error */
+	PORT_IRQ_IF_ERR		= BIT(27), /* interface fatal error */
+	PORT_IRQ_IF_NONFATAL	= BIT(26), /* interface non-fatal error */
+	PORT_IRQ_OVERFLOW	= BIT(24), /* xfer exhausted available S/G */
+	PORT_IRQ_BAD_PMP	= BIT(23), /* incorrect port multiplier */
+
+	PORT_IRQ_PHYRDY		= BIT(22), /* PhyRdy changed */
+	PORT_IRQ_DEV_ILCK	= BIT(7),  /* device interlock */
+	PORT_IRQ_CONNECT	= BIT(6),  /* port connect change status */
+	PORT_IRQ_SG_DONE	= BIT(5),  /* descriptor processed */
+	PORT_IRQ_UNK_FIS	= BIT(4),  /* unknown FIS rx'd */
+	PORT_IRQ_SDB_FIS	= BIT(3),  /* Set Device Bits FIS rx'd */
+	PORT_IRQ_DMAS_FIS	= BIT(2),  /* DMA Setup FIS rx'd */
+	PORT_IRQ_PIOS_FIS	= BIT(1),  /* PIO Setup FIS rx'd */
+	PORT_IRQ_D2H_REG_FIS	= BIT(0),  /* D2H Register FIS rx'd */
 
 	PORT_IRQ_FREEZE		= PORT_IRQ_HBUS_ERR |
 				  PORT_IRQ_IF_ERR |
@@ -162,87 +163,87 @@ enum {
 				  PORT_IRQ_PIOS_FIS | PORT_IRQ_D2H_REG_FIS,
 
 	/* PORT_CMD bits */
-	PORT_CMD_ASP		= (1 << 27), /* Aggressive Slumber/Partial */
-	PORT_CMD_ALPE		= (1 << 26), /* Aggressive Link PM enable */
-	PORT_CMD_ATAPI		= (1 << 24), /* Device is ATAPI */
-	PORT_CMD_FBSCP		= (1 << 22), /* FBS Capable Port */
-	PORT_CMD_ESP		= (1 << 21), /* External Sata Port */
-	PORT_CMD_HPCP		= (1 << 18), /* HotPlug Capable Port */
-	PORT_CMD_PMP		= (1 << 17), /* PMP attached */
-	PORT_CMD_LIST_ON	= (1 << 15), /* cmd list DMA engine running */
-	PORT_CMD_FIS_ON		= (1 << 14), /* FIS DMA engine running */
-	PORT_CMD_FIS_RX		= (1 << 4), /* Enable FIS receive DMA engine */
-	PORT_CMD_CLO		= (1 << 3), /* Command list override */
-	PORT_CMD_POWER_ON	= (1 << 2), /* Power up device */
-	PORT_CMD_SPIN_UP	= (1 << 1), /* Spin up device */
-	PORT_CMD_START		= (1 << 0), /* Enable port DMA engine */
-
-	PORT_CMD_ICC_MASK	= (0xf << 28), /* i/f ICC state mask */
-	PORT_CMD_ICC_ACTIVE	= (0x1 << 28), /* Put i/f in active state */
-	PORT_CMD_ICC_PARTIAL	= (0x2 << 28), /* Put i/f in partial state */
-	PORT_CMD_ICC_SLUMBER	= (0x6 << 28), /* Put i/f in slumber state */
+	PORT_CMD_ASP		= BIT(27), /* Aggressive Slumber/Partial */
+	PORT_CMD_ALPE		= BIT(26), /* Aggressive Link PM enable */
+	PORT_CMD_ATAPI		= BIT(24), /* Device is ATAPI */
+	PORT_CMD_FBSCP		= BIT(22), /* FBS Capable Port */
+	PORT_CMD_ESP		= BIT(21), /* External Sata Port */
+	PORT_CMD_HPCP		= BIT(18), /* HotPlug Capable Port */
+	PORT_CMD_PMP		= BIT(17), /* PMP attached */
+	PORT_CMD_LIST_ON	= BIT(15), /* cmd list DMA engine running */
+	PORT_CMD_FIS_ON		= BIT(14), /* FIS DMA engine running */
+	PORT_CMD_FIS_RX		= BIT(4),  /* Enable FIS receive DMA engine */
+	PORT_CMD_CLO		= BIT(3),  /* Command list override */
+	PORT_CMD_POWER_ON	= BIT(2),  /* Power up device */
+	PORT_CMD_SPIN_UP	= BIT(1),  /* Spin up device */
+	PORT_CMD_START		= BIT(0),  /* Enable port DMA engine */
+
+	PORT_CMD_ICC_MASK	= (0xfu << 28), /* i/f ICC state mask */
+	PORT_CMD_ICC_ACTIVE	= (0x1u << 28), /* Put i/f in active state */
+	PORT_CMD_ICC_PARTIAL	= (0x2u << 28), /* Put i/f in partial state */
+	PORT_CMD_ICC_SLUMBER	= (0x6u << 28), /* Put i/f in slumber state */
 
 	/* PORT_FBS bits */
 	PORT_FBS_DWE_OFFSET	= 16, /* FBS device with error offset */
 	PORT_FBS_ADO_OFFSET	= 12, /* FBS active dev optimization offset */
 	PORT_FBS_DEV_OFFSET	= 8,  /* FBS device to issue offset */
 	PORT_FBS_DEV_MASK	= (0xf << PORT_FBS_DEV_OFFSET),  /* FBS.DEV */
-	PORT_FBS_SDE		= (1 << 2), /* FBS single device error */
-	PORT_FBS_DEC		= (1 << 1), /* FBS device error clear */
-	PORT_FBS_EN		= (1 << 0), /* Enable FBS */
+	PORT_FBS_SDE		= BIT(2), /* FBS single device error */
+	PORT_FBS_DEC		= BIT(1), /* FBS device error clear */
+	PORT_FBS_EN		= BIT(0), /* Enable FBS */
 
 	/* PORT_DEVSLP bits */
 	PORT_DEVSLP_DM_OFFSET	= 25,             /* DITO multiplier offset */
 	PORT_DEVSLP_DM_MASK	= (0xf << 25),    /* DITO multiplier mask */
 	PORT_DEVSLP_DITO_OFFSET	= 15,             /* DITO offset */
 	PORT_DEVSLP_MDAT_OFFSET	= 10,             /* Minimum assertion time */
 	PORT_DEVSLP_DETO_OFFSET	= 2,              /* DevSlp exit timeout */
-	PORT_DEVSLP_DSP		= (1 << 1),       /* DevSlp present */
-	PORT_DEVSLP_ADSE	= (1 << 0),       /* Aggressive DevSlp enable */
+	PORT_DEVSLP_DSP		= BIT(1),         /* DevSlp present */
+	PORT_DEVSLP_ADSE	= BIT(0),         /* Aggressive DevSlp enable */
 
 	/* hpriv->flags bits */
 
 #define AHCI_HFLAGS(flags)		.private_data	= (void *)(flags)
 
-	AHCI_HFLAG_NO_NCQ		= (1 << 0),
-	AHCI_HFLAG_IGN_IRQ_IF_ERR	= (1 << 1), /* ignore IRQ_IF_ERR */
-	AHCI_HFLAG_IGN_SERR_INTERNAL	= (1 << 2), /* ignore SERR_INTERNAL */
-	AHCI_HFLAG_32BIT_ONLY		= (1 << 3), /* force 32bit */
-	AHCI_HFLAG_MV_PATA		= (1 << 4), /* PATA port */
-	AHCI_HFLAG_NO_MSI		= (1 << 5), /* no PCI MSI */
-	AHCI_HFLAG_NO_PMP		= (1 << 6), /* no PMP */
-	AHCI_HFLAG_SECT255		= (1 << 8), /* max 255 sectors */
-	AHCI_HFLAG_YES_NCQ		= (1 << 9), /* force NCQ cap on */
-	AHCI_HFLAG_NO_SUSPEND		= (1 << 10), /* don't suspend */
-	AHCI_HFLAG_SRST_TOUT_IS_OFFLINE	= (1 << 11), /* treat SRST timeout as
-							link offline */
-	AHCI_HFLAG_NO_SNTF		= (1 << 12), /* no sntf */
-	AHCI_HFLAG_NO_FPDMA_AA		= (1 << 13), /* no FPDMA AA */
-	AHCI_HFLAG_YES_FBS		= (1 << 14), /* force FBS cap on */
-	AHCI_HFLAG_DELAY_ENGINE		= (1 << 15), /* do not start engine on
-						        port start (wait until
-						        error-handling stage) */
-	AHCI_HFLAG_NO_DEVSLP		= (1 << 17), /* no device sleep */
-	AHCI_HFLAG_NO_FBS		= (1 << 18), /* no FBS */
+	AHCI_HFLAG_NO_NCQ		= BIT(0),
+	AHCI_HFLAG_IGN_IRQ_IF_ERR	= BIT(1), /* ignore IRQ_IF_ERR */
+	AHCI_HFLAG_IGN_SERR_INTERNAL	= BIT(2), /* ignore SERR_INTERNAL */
+	AHCI_HFLAG_32BIT_ONLY		= BIT(3), /* force 32bit */
+	AHCI_HFLAG_MV_PATA		= BIT(4), /* PATA port */
+	AHCI_HFLAG_NO_MSI		= BIT(5), /* no PCI MSI */
+	AHCI_HFLAG_NO_PMP		= BIT(6), /* no PMP */
+	AHCI_HFLAG_SECT255		= BIT(8), /* max 255 sectors */
+	AHCI_HFLAG_YES_NCQ		= BIT(9), /* force NCQ cap on */
+	AHCI_HFLAG_NO_SUSPEND		= BIT(10), /* don't suspend */
+	AHCI_HFLAG_SRST_TOUT_IS_OFFLINE	= BIT(11), /* treat SRST timeout as
+						      link offline */
+	AHCI_HFLAG_NO_SNTF		= BIT(12), /* no sntf */
+	AHCI_HFLAG_NO_FPDMA_AA		= BIT(13), /* no FPDMA AA */
+	AHCI_HFLAG_YES_FBS		= BIT(14), /* force FBS cap on */
+	AHCI_HFLAG_DELAY_ENGINE		= BIT(15), /* do not start engine on
+						      port start (wait until
+						      error-handling stage) */
+	AHCI_HFLAG_NO_DEVSLP		= BIT(17), /* no device sleep */
+	AHCI_HFLAG_NO_FBS		= BIT(18), /* no FBS */
 
 #ifdef CONFIG_PCI_MSI
-	AHCI_HFLAG_MULTI_MSI		= (1 << 20), /* per-port MSI(-X) */
+	AHCI_HFLAG_MULTI_MSI		= BIT(20), /* per-port MSI(-X) */
 #else
 	/* compile out MSI infrastructure */
 	AHCI_HFLAG_MULTI_MSI		= 0,
 #endif
-	AHCI_HFLAG_WAKE_BEFORE_STOP	= (1 << 22), /* wake before DMA stop */
-	AHCI_HFLAG_YES_ALPM		= (1 << 23), /* force ALPM cap on */
-	AHCI_HFLAG_NO_WRITE_TO_RO	= (1 << 24), /* don't write to read
-							only registers */
-	AHCI_HFLAG_IS_MOBILE		= (1 << 25), /* mobile chipset, use
-							SATA_MOBILE_LPM_POLICY
-							as default lpm_policy */
-	AHCI_HFLAG_SUSPEND_PHYS		= (1 << 26), /* handle PHYs during
-							suspend/resume */
-	AHCI_HFLAG_IGN_NOTSUPP_POWER_ON	= (1 << 27), /* ignore -EOPNOTSUPP
-							from phy_power_on() */
-	AHCI_HFLAG_NO_SXS		= (1 << 28), /* SXS not supported */
+	AHCI_HFLAG_WAKE_BEFORE_STOP	= BIT(22), /* wake before DMA stop */
+	AHCI_HFLAG_YES_ALPM		= BIT(23), /* force ALPM cap on */
+	AHCI_HFLAG_NO_WRITE_TO_RO	= BIT(24), /* don't write to read
+						      only registers */
+	AHCI_HFLAG_IS_MOBILE            = BIT(25), /* mobile chipset, use
+						      SATA_MOBILE_LPM_POLICY
+						      as default lpm_policy */
+	AHCI_HFLAG_SUSPEND_PHYS		= BIT(26), /* handle PHYs during
+						      suspend/resume */
+	AHCI_HFLAG_IGN_NOTSUPP_POWER_ON	= BIT(27), /* ignore -EOPNOTSUPP
+						      from phy_power_on() */
+	AHCI_HFLAG_NO_SXS		= BIT(28), /* SXS not supported */
 
 	/* ap->flags bits */
 
@@ -258,22 +259,22 @@ enum {
 	EM_MAX_RETRY			= 5,
 
 	/* em_ctl bits */
-	EM_CTL_RST		= (1 << 9), /* Reset */
-	EM_CTL_TM		= (1 << 8), /* Transmit Message */
-	EM_CTL_MR		= (1 << 0), /* Message Received */
-	EM_CTL_ALHD		= (1 << 26), /* Activity LED */
-	EM_CTL_XMT		= (1 << 25), /* Transmit Only */
-	EM_CTL_SMB		= (1 << 24), /* Single Message Buffer */
-	EM_CTL_SGPIO		= (1 << 19), /* SGPIO messages supported */
-	EM_CTL_SES		= (1 << 18), /* SES-2 messages supported */
-	EM_CTL_SAFTE		= (1 << 17), /* SAF-TE messages supported */
-	EM_CTL_LED		= (1 << 16), /* LED messages supported */
+	EM_CTL_RST		= BIT(9), /* Reset */
+	EM_CTL_TM		= BIT(8), /* Transmit Message */
+	EM_CTL_MR		= BIT(0), /* Message Received */
+	EM_CTL_ALHD		= BIT(26), /* Activity LED */
+	EM_CTL_XMT		= BIT(25), /* Transmit Only */
+	EM_CTL_SMB		= BIT(24), /* Single Message Buffer */
+	EM_CTL_SGPIO		= BIT(19), /* SGPIO messages supported */
+	EM_CTL_SES		= BIT(18), /* SES-2 messages supported */
+	EM_CTL_SAFTE		= BIT(17), /* SAF-TE messages supported */
+	EM_CTL_LED		= BIT(16), /* LED messages supported */
 
 	/* em message type */
-	EM_MSG_TYPE_LED		= (1 << 0), /* LED */
-	EM_MSG_TYPE_SAFTE	= (1 << 1), /* SAF-TE */
-	EM_MSG_TYPE_SES2	= (1 << 2), /* SES-2 */
-	EM_MSG_TYPE_SGPIO	= (1 << 3), /* SGPIO */
+	EM_MSG_TYPE_LED		= BIT(0), /* LED */
+	EM_MSG_TYPE_SAFTE	= BIT(1), /* SAF-TE */
+	EM_MSG_TYPE_SES2	= BIT(2), /* SES-2 */
+	EM_MSG_TYPE_SGPIO	= BIT(3), /* SGPIO */
 };
 
 struct ahci_cmd_hdr {

drivers/block/Kconfig

@@ -293,15 +293,6 @@ config BLK_DEV_SKD
 
 	Use device /dev/skd$N amd /dev/skd$Np$M.
 
-config BLK_DEV_SX8
-	tristate "Promise SATA SX8 support"
-	depends on PCI
-	help
-	  Saying Y or M here will enable support for the 
-	  Promise SATA SX8 controllers.
-
-	  Use devices /dev/sx8/$N and /dev/sx8/$Np$M.
-
 config BLK_DEV_RAM
 	tristate "RAM block device support"
 	help

drivers/block/Makefile

@@ -29,8 +29,6 @@ obj-$(CONFIG_BLK_DEV_NBD)	+= nbd.o
 obj-$(CONFIG_BLK_DEV_CRYPTOLOOP) += cryptoloop.o
 obj-$(CONFIG_VIRTIO_BLK)	+= virtio_blk.o
 
-obj-$(CONFIG_BLK_DEV_SX8)	+= sx8.o
-
 obj-$(CONFIG_XEN_BLKDEV_FRONTEND)	+= xen-blkfront.o
 obj-$(CONFIG_XEN_BLKDEV_BACKEND)	+= xen-blkback/
 obj-$(CONFIG_BLK_DEV_DRBD)     += drbd/